Apple pencil shows connected but is not recognized.

Similar Questions

• Watch and iPhone both show connected but still not able to communicate

  I have a very frustrating problem with my Apple Watch. She is often unable to communicate with my iPhone. The App shows My is the first to show signs of distress. If I try to check for software updates it swill of the delay and say "unable to verify the update. When this happens, I am also unable to enter the password setting in My Watch. Ping of the watch thinks it works but the phone does not make a noise. As time passes more functions cease to function as notifications and incoming phone calls stop posting on the watch. However, watchmaking and the phone show that it is paired and connected. I tried all combinations of restart the phone and watch. I have disable-paired/repaired the watch several times. I restored it as a watch again after that restore the backups did not help. I restored the phone also leave a backup and like new. Whenever the Watch works fine for a day or two and then starts failing the same way. The watch was Christmas present last year, he almost 8 months and never had this problem until the last two weeks after the last iOS updated to 9.3.3. Help!

  Did you use the steps in this article If your Apple Watch is not connected to your iPhone - Apple support

• My computer is infected with virus/bug I have checkd with Anti virus few records showed infected but could not remove.

  My computer is infected with a virus/bug I have checkd with Anti virus few records showed infected but could not withdraw, step by step programs stoped working, I tried all the things microsoft Web and other webs to run antispy etc, but nothing works programs start, but halfway to display error and stop now even explore stop working, now I had a white windoa screen opens more but I have a lot of data that is important, how to fix it? can anyone help please thanks

  Raz2009,
  If you have a known problem with the virus then I suggest to get an antivirus program that you can boot from and run it without starting Windows.

  Another option would be to format your drive and do a clean install of Windows (this would remove all the data of your drive).  If you have a backup of your data, this is the best course of action.  If you do not have a backup, you can then do a parallel install (This installs XP in a different folder if you don't lose any data). Here is an article on installation options: http://support.microsoft.com/kb/316941
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• Windows Vista service pack installed but is not recognized

  Windows vista service Pack 1 installed, but is not recognized by the system. Update just keeps supply and install it, but you never know. Fix, it finds nothing. I already turned off all the sequrity and tried, but that did not help. I'm just putting in place a system that crashed. everything works well but am blocked the installation of any windows more or update until I can get the service pack in.

  Hello

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Cannot access Internet. It says I'm connected but will not display web pages.

  Original title: web no

  Unable to connect to the web says I'm connected but does not display pages

  Hello

  I suggest that refer you to the articles below that explain some troubleshooting steps basic to perform when you receive Internet connection problems.

  Why can't I connect to the internet?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-Internet

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-GB/Windows/cant-connect-to-network

  If the advice above do not work, try to run a startup mode in minimum mode which must start Windows with only a minimal set of services and programs.

  How to do a clean boot mode

  http://support.Microsoft.com/kb/929135

  Note: After you perform a clean boot, be sure to check the "How to reset the computer to start normally after a boot minimum troubleshooting" section on the article above to start Windows normally.

  Thank you

  Legaede

• Cisco vpn client to connect but can not access to the internal network

  Hi all

  I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

  Any help would be much appreciated.

  Hi Samir,

  I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  (The link above includes split tunneling, but this is just an option.

  Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

  Let me know if this can help,

  See you soon,.

  Christian V

• iPhone 6s and carplay connected but does not work

  It has worked before and now does not. I deleted the system carplay phone and indicated above. The iPhone says bluetooth is connected to carplay and carplay indicates it is connected to the iPhone, but it does not work properly. I can't get or receive calls. I hear the phone ring on incoming calls by speakers in the system several times and when I touch the phone button my steering wheel to answer does not work, or it shows the phone number entering on the radio screen. When I try to make a call, the iPhone does not, I call say they have heard their phones ring but could not hear me speak, phones sounds dead on both ends. I have to disconnect carplay to make and receive calls.

  As side note my iPhone and carplay work with audio for listening to music, but who also has been removed from carplay so that I can put in place the phone carplay only system.

  Any suggestion would be appreciated.

  Concerning

  Steve

  Nevermind, I figured it. I completely turned off the iPhone and he turned his back, and then just followed the car game voice instructions to synchronize.

• Watch WiFi is connected but will not connect to internet

  I have an iPad 2 which, all of a sudden (in the Middle streaming), is more connected to the internet.  I rest the network settings, when this does not work, I have reset all settings, stopped and rebooted, all done basically.  It shows that its connected to my WiFi, but will not connect to internet.  All the other devices in my house work, then there must be a problem with the iPad.

  Reset the router: just pull the power for a few seconds and reconnect. No parameter to get lost.  Other devices operating with success is not serious. The router has probably received an invalid address for the iPad.

• Clip + - Win XP - has worked at first, but now only shows connected, but no drive letter

  Yesterday I installed Sansa + 8 GB with success as well as Rhapsody and I could see the two drive letters for the Sansa. I loaded songs and played them.

  Today I can't see drive letters. Sansa appears as an icon on the desktop. As suggested, I tried uninstalling the driver under "Device Mgr" and windows reinstalled correctly.

  The Sansa itself device shows connected and I can browse the Sansa icon but my songs do not appear! On the Sansa itself, I can see my songs and that they play, but I can't load any more songs. Rhapsody does not see the device is of course.

  The suggestion of "drive letter conflict" will not work because I don't see ANY of the DRIVE LETTERS.

  Before I send it back, what else can I try?   Win XP SP3 update.

  Thank you

  jspence

  DrLucky - right on!  I just find this MSC/MTP switch to another solution.  Now I can copy in the Sansa as any other player, so I'll pass on Rhapsody.

  Thanks for the QUICK POST. I'll mark this corrected.

  jspence

• WAG54GS allows wireless clients to connect but will not assign IP addresses for full connectivity

  I have three XP 3 computers connected between them in a MS home network via a wired hub and access to the internet through a wired connection to a router WAG54GS.  DHCP is enabled on the router, the IP addresses are correctly assigned and internet access to these computers Wired is not a problem.

  In the past, I've connected also with success of laptops to the internet via the feature wireless router, but having not used that for a while, I think now it will not work.  I tried to connect with laptop computers running XP 2 and Vista Home and the problem is the same.  Laptops find broadcasting wireless router and connect but they are not assigned IP addresses during the phase of "Acquiring IP address" resulting in a "Limited or no connectivity message."  Packets are sent to the router, but none are received in return. It is with the strength of the Signal at 73% and the quality of the link to 100%.  Ipconfig displays no deafult assigned gateway and the IP auto configured to be 169.254.96.1 for example.  Ping the router gives "Destination host unreachable".  Not surprisingly, laptops are able to 'see' other computers wired on the MS. network  These laptops connect correctly to the MS network and internet if I change the wired connection.

  If I check the status of the network wireless router configuration good laptops MAC addresses are displayed, but the computer name and the IP address are missing.  I usually use a protection WEP 128 bit on two channels 6 and 13, but it makes no difference if I change this without guarantee, once again the connection occurs, but no IP address is assigned.  DHCP is enabled in the tab for basic configuration of router from 192.168.1.100 with selected up to 50 users DHCP (and DHCP works very well for cable customers).  The IP address of the router is set to 192.168.1.2.  Wi - Fi router is set to "allow everything".  Default settings are used for the parameters wireless advanced, although I tried to reduce the 100 interbval tag at 50 and the RTS and Fragmentation threshold to 2304.  The policy of Internet access on the router is disabled.

  If I have (for purposes of testing only) connect laptops to one of my neighbors secure networks (there are several) to connect laptops very well so I can access the internet, DHCP works great on laptops.  Firmware is v1.00.08 (I looked this modernization, but while I can identify my router version 1.2 downloads talk about types of Annex A and Annex B are mutually exclusive and I'm not clear I have.  I am also doubtful as to if the firmware upgrade would make a difference, because there is no trace of the upgrade solve this kind of problem and I had the Wireless does not work if long ago).  I'm running out of ideas, is there something that I missed?

  Well in this case you can try to upgrade the firmware of your router, go to the website http://www.linksysbycisco.com/UK/en/support/WAG54GS/download...insert of your router model serach tab... select the correct version of your router... Download the firmware file... save this file on the desktop.

  Follow these steps to upgrade the firmware of the device: -.
  Open a page in Internet Explorer browser on a computer hard wired to the router...
  In the address bar type - 192.168.1.1... Leave the name blank username & password use admin lowercase...
  Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
  Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.

  Now reset your router:
  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Once you re-configured settings of your router, and you are able to go online Wired computer, here are some settings that you can configure your wireless router, I think this might solve your problem

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Here, select manual configuration... Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the Standard - 20 MHz Radio band and change the Standard channel to 11-2, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings... Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect... And check if you are able to navigate.

• My laptop shows connected but wireless "no Internet" - HELP!

  I'm on Win7 Home 64-bit edition. I am normally connected by wireless internet. However for the reasons today, I couldn't access the Interior.

  My wireless connection shows that I am connected. However, it also shows the status of 'no Internet' and I couldn't access the internet, well. I tried diabling and then allowing the wireless connection, but the problem persists.

  Please help, all...

  Hello

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  -------------------------

  In genral.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration. Jack-MVP Windows Networking. WWW.EZLAN.NET

• My designjet 430 printer shows ready but does not print troble shoot shows like loan

  I have a ploter deigns jet 430 I have not used for about a year, but I does not print. I got a new computer I put new ink printer it shows ready but I do not print or make noise but on my computer it shows as conspire, I hope someone can help

  Your first point of contact should be forums of HP.  Here you will find specific knowledge on HP printers.

• HP Laserjet M452dn: M452dn Ethernet connected but do not print

  Win10 Pro x 64.

  Printer connects / impressions via USB but not via a direct Ethernet connection or through router.  Connection to printer Ethernet is not but installation disc is located by HP print and Scan by IP addfress doctor. Doctor says software not installed then DLs and installs the software - but still does not print.  Uninstalled and did the all over again: ditto. If again, doctor without uninstalling it (still) says not installed software - although it said it was installed before I ran it again.

  Router/printer Ethernet connection is good (fire port on) and the IP displayed on the printer screen, so I guess that the connection of the cable Ethernet/is OK. Network/print sharing enabled residential group. Utility of Windows/HP ID troubleshooting any problems.

  Something else I could try.

  Thank you

  Monk

  Hello @Hmonk the printer has two ways to be connected but we really recommend use one at a time if you are going to perform a network first installation you want to make sure that you have an IP address from the printer connect the network cable to the printer room will get internet brand of course, on the port on the back of the printer when you have connected cable has a green and the orange light and then go to the menu reports on the printer and print a configuration report right on the 1st page under product settings, you will find IPV4 you must subsequently make the installation at this time where everything you want to make sure, is that the IP address of its different then 0.0.0.0 or 169.254.XXX.XXX since these combinations indicates that the printer its does not properly connect to the network

• Aspire M5-481PT-CD/DVD turn briefly but are not recognized

  I insert discs, the green light flashes for a few seconds, the disc spins, but then the disc never appears to be recognized. When I click on the DVD drive under 'devices and readers' a message pop - up leads me to "Please insert a disk into drive D:." I tried other discs and it never works on a regular basis. Sometimes a disk will be read correctly and it doesn't seem to be any action that causes a correct reading.

  Once again, I'm using a

  Aspire M5-481PT

  Hello

  I would try this Microsoft Fix (resolution 2):

  - Your CD or DVD drive is not recognized by Windows or other programs.