Apply the 11.1.2.3.500 patch
My platform is 6.5 OEL. I applied the patch with the following command.
. / opatch apply/opt/EPM/EPMSystem11R1/OPatch/17529887-oh/opt/EPM/EPMSystem11R1 jre / opt/EPM/jdk160_35 - invPtrLoc /opt/EPM/EPMSystem11R1/oraInst.loc
At the application stage patch 16964825 , he always tries to lock. I was expecting an hour. Here is the content of the newspapers.
BTW, I had installed Oracle database 12.1.0.2 in the same machine. He created an inventory in/opt/oraInventory. Database and PGE are installed with the same account.
[29 October 2014 15:25:28] OPatch invoked as follows: ' apply 16964825 - oh/opt/EPM/oracle_common jdk - / opt/EPM/jdk160_35 - silent - invPtrLoc /opt/EPM/oracle_common/oraInst.loc '
[29 October 2014 15:25:28] YES-67077:
Oracle homepage: / opt/EPM/oracle_common
Inventory Center: / opt/oraInventory
from: /opt/EPM/oracle_common/oraInst.loc
OPatch version: 11.1.0.9.9
YES version: 11.1.0.9.0
YES location: / opt/EPM/oracle_common/Yes
Location of the log file: /opt/EPM/oracle_common/cfgtoollogs/opatch/16964825_Oct_29_2014_15_25_27/apply2014-10-29_15-25-27PM_1.log
[29 October 2014 15:25:28] History of patch file: /opt/EPM/oracle_common/cfgtoollogs/opatch/opatch_history.txt
[29 October 2014 15:25:28] OPatch detects the House of Middleware as "/ opt/EMP.
[29 October 2014 15:25:49] From ApplySession Wed Oct 29 15:25:49 CST 2014
[29 October 2014 15:25:49] Starting apply Session to Wed Oct 29 15:25:49 CST 2014
[29 October 2014 15:25:49] OPatch will do the following:
[Discovery of oracle Home]: Configure and Validate Oracle Home information.
[Prerequisite to apply]: invoke the prerequisites to see if the patch can be applied.
[Patch conflict detection to apply patch]: check if no conflict with already installed patches at Oracle.
[29 October 2014 15:25:49] - Oracle Home discovery -
[29 October 2014 15:25:49] YES - 67086:ApplySession fix provisional application '16964825' OH ' / opt/EMP/oracle_common.
[29 October 2014 15:25:49] Application of the interim fix '16964825' OH ' / opt/EMP/oracle_common.
[29 October 2014 15:25:49] Start applying the patch to local system to Wed Oct 29 15:25:49 CST 2014
[29 October 2014 15:25:49] Check the environment and performing preliminary controls...
[29 October 2014 15:26:09] Cannot lock the Central inventory. OPatch will attempt to lock again.
Do you want? [y | n]
[29 October 2014 15:26:12] Y (auto-répondu by - silence)
[29 October 2014 15:26:12] The user responded with: Y
[29 October 2014 15:26:12] OPatch will sleep for a few seconds, before re - try to get the lock...
[29 October 2014 15:28:32] Cannot lock the Central inventory. OPatch will attempt to lock again.
Do you want? [y | n]
[29 October 2014 15:28:35] Y (auto-répondu by - silence)
[29 October 2014 15:28:35] The user responded with: Y
[29 October 2014 15:28:35] OPatch will sleep for a few seconds, before re - try to get the lock...
I modify the moveADFFiles.sh script to ignore AFD patches. Then patched two patches manually.
Tags: Business Intelligence
Similar Questions
-
Calculation Manager does not start after the 11.1.2.3.500 patch
Hi all
Before the upgrade with the patch 500 the EPM environment worked very well.
After you apply the hotfix (17529887) and later (19142919), I am facing a strange error.
After restarting the services, Manager of calculation does not work. All other components of EPMA operate correctly.
When trying to start the calculation Manager, the window becomes like a Web page when there is no internet connection. Internal error in the server with instructions to check your internet connection, etc..
I looked in several log files, but did not find anything.
Where to look?
Kind regards
Philip Hulsebosch
Hi Philippe,.
We had the same problems with our manager of Calc, but our environment was on a SSL using SST. To apply a patch 18880328 on 17529887 to get this working. Don't know if you're on SSL, but its value give a try.
From the Readme:
18814874
After the application SSL using SST, sailing Manager of calculation, may show a blank page.
https://updates.Oracle.com/Orion/services/download?type=Readme&Aru=17802865#_Toc391649535
You also have to apply 11.1.2.3.501 Hyperion Shared Services (18672071) If you are on SSL.
HTH
Thank you
-
How to apply the discoverer 10.1.2.3 patch # 5983622
Hello
I have installed Oracle Business Intelligence 10.1.2.0.2 and 10.1.2.0.2 successfully Bi_Tools to learn the discoverer.
I have a patch file (p5983622_10123_winnt).
I want to improve my client 10.1.2.48.18 discoverer and discoverer to 10.1.2.3 administration.
Its installation on windows and in my local system.
I would appreciate your help.Hello
It is a major improvement and is a very stable version.If you have not already applied 10.1.2.2 then upgrade to 10.1.2.3 is a major update and I recommend your DBA and / or your administrator to read the release notes carefully startng before the upgrade.
10.1.2.3 vital Note: after installing this patch make sure you also install the latest cumulative patch.
This is a major update which may also require an upgrade of your database infrastructure. If you do not use a 10.1.2.3 infrastructure upgrade is very easy and should take a skilled administrator, not more than an hour. The upgrade with an infrastructure is more complex and will take a few hours for the better part of a day, depending on the complexity and configuration of your application server installation.
After you have upgraded to 10.1.2.3, your version of discoverer will be 10.1.2.55.26
For more information about what I said above, please consult the following publication on my blog: http://learndiscoverer.blogspot.com/2008/04/most-useful-patch-numbers.html
Best wishes
Michael -
Applying the 10.2.0.4 group patches of database with compatible version tables
Recently, we have applied the 10.2.0.4 group fixes database to a database where we had a few tables compatible version. Applying the patch Group took a little longer than expected and flipping through the newspaper, it took about 30 minutes to upgrade the Workspace Manager.
1) I know in the past that the Workspace Manager patches were separate from patches of the database. MetaLink NOTE: 341353.1 "Why the Workspace Manager version is different from the current version of the patches RDBMS group" seems to indicate that it is no longer the case,
>
From group fixes version V10.2.0.4, the Oracle Workspace Manager updates are integrated with the RDBMS patchsets credits.
>
But this statement seems to be a secondary element in a document clarifying a distinct behavior. Y at - it another document (Metalink or otherwise) who deals directly with this change?
(2) someone has a good feeling for the purposes of how long this and future patchsets should take when there are potentially large tables compatible version in the system? I'm hoping / assuming that it is not a linear relationship, because the tables in compatible version, we have at present are rather small. But I don't know if the upgrade time is basically a constant or if there is a dependency on the size of the tables compatible version, the number of tables compatible version, etc.
I fear that we may end up with very large tables compatible version which would require significant downtime when we apply future patchsets if we Workspace Manager of bugs. I hope / expect that this isn't the case, but I would check a second time thinking.
JustinHi Justin,
#1. I couldn't find another document which deals with this, but I can just be missing it. I see if there is something else and let you know if I find anything.
#2. There are some fixed and variable upgrade for Workspace Manager. Fixed potion RECOMPILE all packages/views, change the tables of metadata, etc. used directly by Workspace Manager. Another potion is made for each table enabled version. First of all, the view and maintained by Workspace Manager triggers are rebuilt. It is usually a fast operation, because it is not dependent on the size of the table. There is also the potential of migration of data for each of the rows in the table with version. If necessary, it would take much longer time, but this type of migration has not been required since version 9.2. If you are upgrading from a version newer than this, this part of the migration would be unnecessary.
Kind regards
Ben -
How to apply the 9874305 patch
Hi all
I must apply the patch 9874305 .
Read me file that I found no instructions how to apply this hotfix, even on applications of services should be upwards or downwards.
Here's this file
Help, please
Kind regards.Salvation;
can we apply this action plan onlline productuion instance is turned?
All first please do not post details of notes metalink on a public place because of the interoperability pollicy, thatswhy Please edit your first post.
Secondlyi the readme file does not, you must close your apps services but either incidentally, I recommend nearby services and apply the fix. Second present before patch be sure whether or not you have 6372396 on your system. If you are at this level or higher
1. close apps services
2. use adadmin and take your system in mode manitanance
3. fix appy using adadmin utulity
4 turn off the manitanance mode
5 open services
6. check simultaneous and run only one application and make sure that its compliatedRespect of
HELIOS -
Update failed. The update could not be installed (patch applies failed). He seems to want to upgrade 7.0.1 to 8. But when I click on the link, it does not offer updates, just all a band/reinstall! Where is the page of updates? Help?
You can try the alternative and easier way by downloading here
-
Qosmio F750 - Blu - ray player - is unable to apply the patch
When I apply the disk TC30422300A - Toshiba Blu - ray player patch V1.0.0.299_A I get the message "Can't find the player" even if the player is present and functional.
I've updated to Win 7 Ultimate on this machine.Is there a work around or a born Player I can reinstall?
I can't do a full restore as will erase everything. Is there a way to extract only this program since the recovery DVDs?Thank you.
Sorry, mate, but I can not follow you
This patch do you mean?
Download Toshiba 1.01.299_A Blu - ray disc player software also since the Australian driver Toshiba page:
http://www.MyToshiba.com.au/support/computers/Qosmio/F750/pqf75a-02m00q/download?OS=25Check it!
-
The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7. Update Windows shows about 100 updates important to apply. I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list. I don't understand why this is. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with?
Thank you
Hello
I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.
For more information, take a look at the following link:
http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates
-
Apply the patches to ACS 5.1
Hi all
I hope someone can help with this problem.
I have an ACS 5.1 with the next load of S/W
Deploying applications engine Cisco OS version: 1.2
ADE-OS Build Version: 1.2.0.146
ADE-OS System Architecture: i386Cisco ACS VERSION INFORMATION
-----------------------------
Version: 5.1.0.44
The identifier for the internal version: B.2347I downloaded 5-1-0-44 - 3.tar.gpg, 5-1-0-44 - 4.tar.gpg and 5-1-0-44 - 5.tar.gpg to a local directory on GBA, but every time I try to run the upgrade patch GBA fix install 5-1-0-44 - 5.tar.gpg repository_name repository get following error output...
chmod: cannot access at the "* .sh ': no such file or directory".
Patch not valid 5-1-0-44-5.tar.gpg'-missing install.sh
% Error: failed to open / validate the patchI have moved the 5-1-0-44 - 5.tar.gpg to a linux machine and tried to dencrypt the file using gpg d 5-1-0-44 - 5.tar.gpg but it invites then pass phrase, I tried a few guesses, but I couldn't decipher.
So what part of the upgrade process I am missing, or do I have to install some kind of password so that the ACS can properly decrypt files to fix.
I tried this with the patch 3, 4 and 5. I need to start pathch 1?
Thank you
Cefyn Arch
Helloz,
Form where you downloaded the patch. I suggest you download from cisco.comif you download before.
http://Tools.Cisco.com/Squish/1D47B
No, you can directly apply the patch 5.
Correct the command that you run to apply the patch.
I wish allows you to check a few things1 are you using TFTP? If so, then switch to FTP and try again.
2. prior to apply the hotfix, make sure that you can see the file in the repository.Show repository
If you can see patch 5 under the repository then you're good to go.
HTH
Jousset
~ Make useful messages rate
-
I was wondering if someone can help me to update my ACS camera with patch 4.1.1.23.4 - SW. It's simple to apply it in a normal server, 2000. The ACS unit according to me is different because we can access through normal terminal, keyboard and mouse.
Some I had to read it is necessary a tomcat server?
Help, please
ADI
Hello
ACS v4.1.1.23 patch 5 is available then go for this new patch.
You should have a pc that can access the ACS through the web interface. Keep the file of fix on the PC.
Follow the steps below on the PC:
[1] extract zipped file
[2] get? Autorun.exe? file and double-click it
[3] it will start a server tomcat on your desk and you? 'll see a web page asking ACS
IP SE:
Provide the IP ACS SE and the press? Install?
[4] he will ask for ACS admin username and password as shown below:
Specify the user name and the password and connect.
[5] then he raise ACS GUI, then go to
System configuration > device upgrade status > download,.
Then we? 'll get a screen where it will ask for the ip address of the server to install:
Provide the ip address of the system where we apply this patch, in our case our
ip address of office, and then click on connect.
[6] he will show us after screen:
Click on? Download now?
Then he? show us this screen:
Press? Refresh? Until we see the following screen:
[7] now, press on? Apply the update? Then he? He wants confirmation:
Press? Update?, then we? 'll get information about the patch.
Click on? Yes?.
It? LL take a few minutes to apply this hotfix on the device.
Then he? show us a confirmation message:
Press? Fact?, then the system will restart.
To confirm that the patch has been applied successfully, goto
System configuration > status upgrade unit
After all right, stop the tomcat server by clicking on? stop server distribution? or
If you want to apply this hotfix on a device more click on? Install following?
I hope this helps.
~ Rohit
-
How to apply the patch to power supply in an environment of dataguard
I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.
Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.
In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.
To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:
1 reporter on the primary to the standby log shipping.
2 cancel the MRP on the standby database.
3. apply the patch of power supply on the standby server. -See the Readme for instructions.
4. ensure that the standby db is mounted and the earpiece is in place on the standby server.
5. do not run any script correction on the standby database.
6. apply the patch of power supply on the principal server.
7. make sure that your primary database and the listener on the primary server is running.
8 turn on the primary to the standby log shipping.
9 start the MRP on the standby database.
10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.
Please refer to this
How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)
Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao
HTH
-Jonathan Rolland
-
How to apply the patch in oracle 12 c
Hello
Is there a correct way to apply a patch in oracle 12 c.
Database is up and running (in open mode / read, write)
No application is connected to the database
But it seems that his is not successful.
[oracle@localhost 19504744] $ opatch apply
Setup Oracle interim Patch version 12.1.0.1.10
Copyright (c) 2015, Oracle Corporation. All rights reserved.
Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1
Inventory Center: / home/oracle/app/oraInventory
from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc
OPatch version: 12.1.0.1.10
YES version: 12.1.0.2.0
Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
Check the environment and performing preliminary controls...
Skip patch 19504744 list of patches to apply: this patch is not required.
After ignoring the patches with missing components, there are no patches to apply.
OPatch Session is complete warning.
Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
[December 7, 2015 02:06:59] OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»
[December 7, 2015 02:06:59] Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil
[December 7, 2015 02:06:59] YES-67077:
Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1
Inventory Center: / home/oracle/app/oraInventory
from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc
OPatch version: 12.1.0.1.10
YES version: 12.1.0.2.0
YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui
Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
[December 7, 2015 02:06:59] History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt
[December 7, 2015 02:07:01] [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)
[December 7, 2015 02:07:01] [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)
[December 7, 2015 02:07:01] [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)
[December 7, 2015 02:07:01] [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)
[December 7, 2015 02:07:01] Check the environment and performing preliminary controls...
[December 7, 2015 02:07:01] Checking for conflicts between the colonies...
[December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Adapter can go list: 19504744
[December 7, 2015 02:07:01] Not need adapter list:
[December 7, 2015 02:07:01] List of self-catering maps:
[December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Intra-conflict control PASSED
[December 7, 2015 02:07:01] Checking whether Oracle Home has components required by tasks...
[December 7, 2015 02:07:01] Check if the "19504744" patch is a patch of no-op.
[December 7, 2015 02:07:01] Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0
[December 7, 2015 02:07:01] [oracle.rdbms, 12.1.0.2.0]
Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.
[December 7, 2015 02:07:01] CheckMissingComp: hash match, re - build SWFs
[December 7, 2015 02:07:01] YES-67124:
After ignoring the patches with missing components, there are no patches to apply.
[December 7, 2015 02:07:01] UtilSession: N-apply is.
[Dec 7, 2015 2:07:01 AM] --------------------------------------------------------------------------------
[December 7, 2015 02:07:01] The following warnings occurred during execution of OPatch:
([7 December 2015 02:07:01] 1) YES-67124:
After ignoring the patches with missing components, there are no patches to apply.
[Dec 7, 2015 2:07:01 AM] --------------------------------------------------------------------------------
[December 7, 2015 02:07:01] YES - 67008:OPatch Session is complete warning.
[December 7, 2015 02:07:01] Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015
[December 7, 2015 02:07:01] Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log
[December 7, 2015 02:07:01] YES - 67008:OPatch Session is complete warning.
1. not a correct way to apply the patch
2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)
Look in your current patch its not needed
Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)
Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).
Update:
Check the environment and performing preliminary controls...
Jump list of patches to apply 19504744 patch : this patch is not necessary.
Clearly it indicating information-Pavan Kumar N
-
Strange worker has no reasons when applying the patch 17529626
Dear all,
I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:
1:
An error occurred during re-Association of the application programs.
Continue as if it was successful [No.]: Yes
I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.
2: after spending the step that precedes the adpatch blocks in the following lines:
IMPOSSIBLE: folder ap_holds_all.xdf worker 1.
IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.
ATTENTION: Fix the worker failed above the Manager to continue.
I checked the logs of the worker, and I got the following:
1:
INFO: An additional column ATTRIBUTE7 exist in the target database
INFO: An additional column ATTRIBUTE8 exist in the target database
INFO: An additional column ATTRIBUTE9 exist in the target database
INFO: An additional column LAST_UPDATED_BY exist in the target database
The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column
WARNING: The missing column is NOT NULL and there is no default to apply
Add a nullable column with the statement
Executing statement
ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)
Start time for the above statement is kills Sep 20 23:42:21 THIS 2015
End time for the above statement is kills Sep 20 23:42:21 THIS 2015
Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)
Error message is ORA-01430: column being added already exists in the table
Error code is 1430
==========================================================
Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]
Update task with status 1
AD worker error:
The utility FndXdfCmp returned the error for the task above.
AD worker error:
The above program has failed. See the error messages listed
above, as appropriate, or look at the log files and output of the program.
When the worker has no time: Tuesday, October 20, 2015 23:42:21
Assignment 2:
INFO: An additional column ATTRIBUTE7 exist in the target database
INFO: An additional column ATTRIBUTE8 exist in the target database
INFO: An additional column ATTRIBUTE9 exist in the target database
The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1
Executing statement
ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)
Start time for the above statement is kills Sep 20 23:41:59 THIS 2015
End time for the above statement is kills Sep 20 23:41:59 THIS 2015
Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)
Error message is ORA-01430: column being added already exists in the table
Error code is 1430
==========================================================
Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]
Update task with status 1
AD worker error:
The utility FndXdfCmp returned the error for the task above.
AD worker error:
The above program has failed. See the error messages listed
above, as appropriate, or look at the log files and output of the program.
When the worker has no time: Tuesday, October 20, 2015 23:41:59
So I checked the two tables for these columns:
DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists
DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists
Now, I'm confused and I don't know how to solve this problem, please help?
In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!
Thank you very much for your help!
Concerning
Moussa
Please check
Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)
Patch is different but the error is the same
concerning
Pravin
-
Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error
AutoPatch error:
You must be in Maintenance Mode to apply the patches.
You can use the AD Administration utility to set the Maintenance Mode.
I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.
How I applied the patch
source, run fs
adoption phase = apply patches = 18345006 = no allnodes
The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.
Apparently, the maintenance mode error is just a smoke screen
-
Hello
I use JDev 11.1.2.4.0 in windows 8.1
I want to run my ADF application locally my JDeveloper and run in IE11. Here are the steps I followed:
I closed JDeveloper and weblogic Server embedded
1-DOWNLOAD patch 18277436 as in https://blogs.Oracle.com/jdeveloperpm/entry/oracle_jdeveloper_and_adf_patches
2 - this patch has 2 patches (18277436/Yes & 18277436 / his). I opened me read file and I found that I have to use 18277436 / her for 11.1.2.4.0.So JDev, I'll use the patch 18277436 / his
3 - I opened the folder of his and I follow the steps in the readme file.
4. I downloaded the OPatch p5912518_111000_GENERIC.zip.
5. in C:\Oracle\Middleware\jdeveloper I extracted the folder OPatch
6. I open cmd and write ORACLE_HOME = C:\Oracle\Middleware\jdeveloper
7. I go to the patch path and then apply the patch as C:\18277436\sa\18277436 > C:\Oracle\Middleware\jdeveloper\OPatch\opatch apply - jdk C:\Oracle\Middleware\jdk160_24
Citing O Patch 11.1 .0.0.1
Setup Oracle interim Patch version 11.1.0.0.1
Copyright (c) 2011, Oracle Corporation. All rights reserved.
Oracle home: C:\Oracle\Middleware\jdeveloper
The Oracle Home Inventory: C:\Oracle\Middleware\jdeveloper\sainventory
OPatch version: 11.1.0.0.1
Product information: C:\Oracle\Middleware\jdeveloper\product.xml
Location of the log file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch2015-06-19_12-29 - 03 PM .log
History of patch file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch_hiMobyDick.txt
Fix provisional application '18277436' ApplySession to OH ' C:\Oracle\Middleware\jdeveloper'
Prior running check...
Please stop Oracle instances miss this ORACLE_HOME on local system.
(Oracle Home = "C:\Oracle\Middleware\jdeveloper")
The local system is ready for the patcher? [y | n]
There
The user responded with: Y
Backup of files and inventory (no self-catering) for the Oracle home
Backup of files affected by the patch "18277436" for the restoration. It may take a while...
Backup of files affected by the patch "18277436" for the restoration. It may take some time...
Patching component oracle.jdeveloper, 11.1.2.4.0...
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-api - 11.jar '
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-automation - 11.jar '
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-impl - 11.jar '
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war"
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\dvt - faces.jar '
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - api .jar '
Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - impl.jar '
ApplySession adding temporary patch '18277436' to the inventory
Checking for update...
OK stock check: Patch ID 18277436 is part of the spirit of the inventory of Oracle Homemetadata good h.
Files check OK: Patch ID 18277436 files are present at Oracle.
The local system has been fixed, and it can be restarted.
OPatch succeeded.
If Opatch is successful.
8 clear the tmp folder in [MW_HOME] / user_projects/domains / [domain_name] [SERVER NAME] /servers/ /tmp/
9. I start my JDeveloper using C:\ > C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -own
10. I run my ADF JDeveloper application the IE11 open to access the application I got "browser not supported message.
Why I got 'browser unsupported message' y at - it something missing?
Is there an apply patch 18277436 in JDev 11.1.2.4.0 and run the application in IE11?
Thank you.
Try to follow the same steps that you did but set ORACLE_HOME = C:\Oracle\Middleware\oracle_common and extract oracle_common folder instead of the folder jdeveloper OPatch.
If you get errors while applying the patch in oracle_common try to remove the middleware House and re-JDeveloper Setup again.
Maybe you are looking for
-
Change the structure of program based on the input file
I have a program that takes parameters of an input file and then executes a Visual acquisition, using IMAQ, controlling some other hardware at the same time. The duration of the various stages of this process control settings. There is a sequence st
-
I don't have microsoft Freecell card games, hearts or solitaire can download these from microsoft and how
-
Vista Genuine fungerer ikke jeg har vist naked Surf Bak 2...
bak2 Vista
-
Security service center does not illuminate
my security service center does not and I have read some of the forums and went to services and tried to turn it on by clicking and neutrophilia early so I could get the error code, but it won't let me select start
-
Lock to talk about blackBerry Smartphones
I just read on another forum that it would be a problem with "memory leak" If you use the locking of the conversation. Anyone know if this is true and how you check the amount of memory is allocated for it? Thank you.