apply the patches

Similar Questions

• Update Windows shows about 100 updates important to apply. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with? Thank you

  The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7.  Update Windows shows about 100 updates important to apply.  I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list.  I don't understand why this is.  How would you recommend I do.  I'm afraid to apply the patches to 100 at a time.  Those who would be safer to start with?

  Thank you

  Hello

  I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.

  For more information, take a look at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

• Apply the patches to ACS 5.1

  Hi all

  I hope someone can help with this problem.

  I have an ACS 5.1 with the next load of S/W

  Deploying applications engine Cisco OS version: 1.2
  ADE-OS Build Version: 1.2.0.146
  ADE-OS System Architecture: i386

  Cisco ACS VERSION INFORMATION
  -----------------------------
  Version: 5.1.0.44
  The identifier for the internal version: B.2347

  I downloaded 5-1-0-44 - 3.tar.gpg, 5-1-0-44 - 4.tar.gpg and 5-1-0-44 - 5.tar.gpg to a local directory on GBA, but every time I try to run the upgrade patch GBA fix install 5-1-0-44 - 5.tar.gpg repository_name repository get following error output...

  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-1-0-44-5.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I have moved the 5-1-0-44 - 5.tar.gpg to a linux machine and tried to dencrypt the file using gpg d 5-1-0-44 - 5.tar.gpg but it invites then pass phrase, I tried a few guesses, but I couldn't decipher.

  So what part of the upgrade process I am missing, or do I have to install some kind of password so that the ACS can properly decrypt files to fix.

  I tried this with the patch 3, 4 and 5.  I need to start pathch 1?

  Thank you

  Cefyn Arch

  Helloz,

  Form where you downloaded the patch. I suggest you download from cisco.comif you download before.

  http://Tools.Cisco.com/Squish/1D47B

  No, you can directly apply the patch 5.
  Correct the command that you run to apply the patch.
  I wish allows you to check a few things

  1 are you using TFTP? If so, then switch to FTP and try again.
  2. prior to apply the hotfix, make sure that you can see the file in the repository.

  Show repository

  If you can see patch 5 under the repository then you're good to go.

  HTH

  Jousset

  ~ Make useful messages rate

• How to apply the patch to power supply in an environment of dataguard

  I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

  Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

  In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

  To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

  1 reporter on the primary to the standby log shipping.

  2 cancel the MRP on the standby database.

  3. apply the patch of power supply on the standby server. -See the Readme for instructions.

  4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

  5. do not run any script correction on the standby database.

  6. apply the patch of power supply on the principal server.

  7. make sure that your primary database and the listener on the primary server is running.

  8 turn on the primary to the standby log shipping.

  9 start the MRP on the standby database.

  10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

  Please refer to this

  How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

  Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

  HTH

  -Jonathan Rolland

• How to apply the patch in oracle 12 c

  Hello

  Is there a correct way to apply a patch in oracle 12 c.

  Database is up and running (in open mode / read, write)

  No application is connected to the database

  But it seems that his is not successful.

  [oracle@localhost 19504744] $ opatch apply

  Setup Oracle interim Patch version 12.1.0.1.10

  Copyright (c) 2015, Oracle Corporation.  All rights reserved.

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  Check the environment and performing preliminary controls...

  Skip patch 19504744 list of patches to apply: this patch is not required.

  After ignoring the patches with missing components, there are no patches to apply.

  OPatch Session is complete warning.

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  
  

  cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»

  [December 7, 2015 02:06:59]     Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil

  [December 7, 2015 02:06:59]     YES-67077:

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)

  [December 7, 2015 02:07:01]     Check the environment and performing preliminary controls...

  [December 7, 2015 02:07:01]     Checking for conflicts between the colonies...

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Adapter can go list: 19504744

  [December 7, 2015 02:07:01]     Not need adapter list:

  [December 7, 2015 02:07:01]     List of self-catering maps:

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Intra-conflict control PASSED

  [December 7, 2015 02:07:01]     Checking whether Oracle Home has components required by tasks...

  [December 7, 2015 02:07:01]     Check if the "19504744" patch is a patch of no-op.

  [December 7, 2015 02:07:01]     Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0

  [December 7, 2015 02:07:01]     [oracle.rdbms, 12.1.0.2.0]

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.

  [December 7, 2015 02:07:01]     CheckMissingComp: hash match, re - build SWFs

  [December 7, 2015 02:07:01]     YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [December 7, 2015 02:07:01]     UtilSession: N-apply is.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     The following warnings occurred during execution of OPatch:

  ([7 December 2015 02:07:01] 1) YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  [December 7, 2015 02:07:01]     Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  1. not a correct way to apply the patch

  2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)

  Look in your current patch its not needed

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)

  
  

  Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).

  
  

  Update:

  
  

  Check the environment and performing preliminary controls...

  Jump list of patches to apply 19504744 patch : this patch is not necessary.

  
  Clearly it indicating information
  

  -Pavan Kumar N

• Strange worker has no reasons when applying the patch 17529626

  Dear all,

  I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:

  1:

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.

  2: after spending the step that precedes the adpatch blocks in the following lines:

  IMPOSSIBLE: folder ap_holds_all.xdf worker 1.

  IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.

  ATTENTION: Fix the worker failed above the Manager to continue.

  
  

  I checked the logs of the worker, and I got the following:

  1:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  INFO: An additional column LAST_UPDATED_BY exist in the target database

  The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column

  WARNING: The missing column is NOT NULL and there is no default to apply

  Add a nullable column with the statement

  Executing statement

  ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Start time for the above statement is kills Sep 20 23:42:21 THIS 2015

  End time for the above statement is kills Sep 20 23:42:21 THIS 2015

  Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:42:21

  Assignment 2:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1

  Executing statement

  ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Start time for the above statement is kills Sep 20 23:41:59 THIS 2015

  End time for the above statement is kills Sep 20 23:41:59 THIS 2015

  Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:41:59

  So I checked the two tables for these columns:

  DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists

  DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists

  Now, I'm confused and I don't know how to solve this problem, please help?

  In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!

  Thank you very much for your help!

  Concerning

  Moussa

  Please check

  Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)

  Patch is different but the error is the same

  concerning

  Pravin

• lyingWhen application of a fix via ADOPTION, he failed with the AutoPatch error: you must be in Maintenance Mode to apply the patches.

  Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error

  AutoPatch error:

  You must be in Maintenance Mode to apply the patches.

  You can use the AD Administration utility to set the Maintenance Mode.

  I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.

  How I applied the patch

  source, run fs

  adoption phase = apply patches = 18345006 = no allnodes

  The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.

  Apparently, the maintenance mode error is just a smoke screen

• Apply the Patch IE11

  Hello

  I use JDev 11.1.2.4.0 in windows 8.1

  I want to run my ADF application locally my JDeveloper and run in IE11. Here are the steps I followed:

  I closed JDeveloper and weblogic Server embedded

  1-DOWNLOAD patch 18277436 as in https://blogs.Oracle.com/jdeveloperpm/entry/oracle_jdeveloper_and_adf_patches

  2 - this patch has 2 patches (18277436/Yes & 18277436 / his). I opened me read file and I found that I have to use 18277436 / her for 11.1.2.4.0.So JDev, I'll use the patch 18277436 / his

  3 - I opened the folder of his and I follow the steps in the readme file.

  4. I downloaded the OPatch p5912518_111000_GENERIC.zip.

  5. in C:\Oracle\Middleware\jdeveloper I extracted the folder OPatch

  6. I open cmd and write ORACLE_HOME = C:\Oracle\Middleware\jdeveloper

  7. I go to the patch path and then apply the patch as C:\18277436\sa\18277436 > C:\Oracle\Middleware\jdeveloper\OPatch\opatch apply - jdk C:\Oracle\Middleware\jdk160_24

  Citing O Patch 11.1 .0.0.1

  Setup Oracle interim Patch version 11.1.0.0.1

  Copyright (c) 2011, Oracle Corporation.  All rights reserved.

  Oracle home: C:\Oracle\Middleware\jdeveloper

  The Oracle Home Inventory: C:\Oracle\Middleware\jdeveloper\sainventory

  OPatch version: 11.1.0.0.1

  Product information: C:\Oracle\Middleware\jdeveloper\product.xml

  Location of the log file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch2015-06-19_12-29 - 03 PM .log

  History of patch file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch_hiMobyDick.txt

  Fix provisional application '18277436' ApplySession to OH ' C:\Oracle\Middleware\jdeveloper'

  Prior running check...

  Please stop Oracle instances miss this ORACLE_HOME on local system.

  (Oracle Home = "C:\Oracle\Middleware\jdeveloper")

  The local system is ready for the patcher? [y | n]

  There

  The user responded with: Y

  Backup of files and inventory (no self-catering) for the Oracle home

  Backup of files affected by the patch "18277436" for the restoration. It may take a while...

  Backup of files affected by the patch "18277436" for the restoration. It may take some time...

  Patching component oracle.jdeveloper, 11.1.2.4.0...

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-api - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-automation - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-impl - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war"

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\dvt - faces.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - api .jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - impl.jar '

  ApplySession adding temporary patch '18277436' to the inventory

  Checking for update...

  OK stock check: Patch ID 18277436 is part of the spirit of the inventory of Oracle Homemetadata good h.

  Files check OK: Patch ID 18277436 files are present at Oracle.

  The local system has been fixed, and it can be restarted.

  OPatch succeeded.

  If Opatch is successful.

  8 clear the tmp folder in [MW_HOME] / user_projects/domains / [domain_name] [SERVER NAME] /servers/ /tmp/

  9. I start my JDeveloper using C:\ > C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -own

  10. I run my ADF JDeveloper application the IE11 open to access the application I got "browser not supported message.

  Why I got 'browser unsupported message' y at - it something missing?

  Is there an apply patch 18277436 in JDev 11.1.2.4.0 and run the application in IE11?

  Thank you.

  Try to follow the same steps that you did but set ORACLE_HOME = C:\Oracle\Middleware\oracle_common and extract oracle_common folder instead of the folder jdeveloper OPatch.

  If you get errors while applying the patch in oracle_common try to remove the middleware House and re-JDeveloper Setup again.

• Apply the patches for EBS R12.2 ORS

  Hi all

  I just finished the basic installation 12.2.0. I want to apply the patch to 12.2.4. Do I need to install the first ORS patches?

  Can you check if this process is correct? Which MOS Doc ID can we find?

  Backup your existing Instance R12.2 upward.

  Connection for the user of the application.

  Copy the patches to $APPL_TOP_NE /... /patch

  CD $ADMIN_SCRIPTS_HOME

  ./adstpall.sh apps/apps

  . < RUN_BASE > / APPS/appl/EBSapps < nom_du_contexte > .env - located the .env APP < nom_du_contexte >

  CD $ADMIN_SCRIPTS_HOME

  ./adadminsrvctl.sh start

  adoption phase = apply patches = < patch_number > /hotpatch = yes

  INSTANTIATION OF OSH

  $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/ssl_conf_FMW.tmp - stat

  $ $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/mod_wl_ohs_conf_FMW.tmp - stat

  $ $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/admin_conf_FMW.tmp - stat

  Perl $FND_TOP/patch/115/bin/txkSetAppsConf.pl $.

  -contextfile = $CONTEXT_FILE.

  -outfile=$INST_TOP/logs/appl/RGF/TXK/temp.txt

  CD $ADMIN_SCRIPTS_HOME

  ./adstrtall.sh

  adoption phase = fs_clone

  Thank you all.

  Hello

  MariaKarpa (MK) wrote:

  Hi all

  I just finished the basic installation 12.2.0. I want to apply the patch to 12.2.4. Do I need to install the first ORS patches?

  Can you check if this process is correct? Which MOS Doc ID can we find?

  You need to install the patches according to the document

  Oracle E-Business Suite Release 12.2.4 Readme (Doc ID 1617458.1)

  Oracle E-Business Suite version 12.2: consolidated list of patches and fixes of technology (Doc ID 1594274.1)

  Applying the last pub and the T2K release update pack for Oracle E-Business Suite Release 12.2 (Doc ID 1617461.1)

  Please use your existing wires, do not open a new

  Thank you

• apply the patches of several products

  
  Hi gurus.

  I have an SR open the framework of this call, but its been almost 2 weeks and several calls of "escaclation" and still nothing from them...

  I must apply a number of patches in a range of products. Some of these products are 'shared', as in they need to be patched because they are dependencies on other installed products "full."

  What is the best way to apply these in the shortest amount of time?

  I'd like to just their bundle all in a merger and press the apply... but I'm afraid that this is going to work.

  They I think about it is to run each corrective product group in separately... This will take a long time as I have about 8 different prodcuts to patch for.

  Any ideas?

  Thank you

  DA.

  11.5.10.2

  11.2.03

  ANY 5.5

  Thanks for that - do happen to know if merge fails in the merge process tries to merge a patch that updates the announcement / DNF top? If so, then fine

  -I don't want to just fall to half way through the application of patches.

  So you should know at this time and before applying the patch merged, it will fail in the fusion process.

  Also, if I use the merge, options usable with adpatch follows? options adpatch = nocompiledb, nomaintainmrc

  Yes you can, a merged patch is like any other patch that can be applied using adpatch - AD Options from command line for the version R12 (Doc ID 1078973.1)

  Thank you

  Hussein

• Apply the patches OBIEE 11 g

  Hi all
  
  Currently we use OBIEE 11.1.1.6.4 someone is 6.4 before patch. Now I need to apply 11.1.1.6.10 patch set. I download all the 6.10 patches.our weblogic server version 10.3.5.0
  Please help how to apply patches to the linux environment and can share any document to apply the patches.
  
  THX,
  ANI

  Make sure you have these configuration paths correctly using command line

  FMW_HOME = your installation directory eg:(/u01/middlewarehome/Oracle_BI1)
  $ FMW_HOME/Oracle_BI1 CD
  Export ORACLE_HOME = $PWD
  export PATH = $ORACLE_HOME/bin: $PATH
  Export JAVA_HOME = $ORACLE_HOME/jdk
  export PATH = $JAVA_HOME/bin: $PATH
  export PATH = $ORACLE_HOME/OPatch: $PATH

  If you have the wrong oracle_home then it will lift these errors

  It may be useful

• Cannot apply the patch due to the error of the applet

  I am trying to apply this hotfix http://helpx.Adobe.com/ColdFusion/KB/ColdFusion-security-hotfix-apsb13-03.html but when I go to System Info > update file, I get a security error JRE. I tried Chrome, Safari, FF on PC and Mac without success. Is there another way to apply the patch without having stupid applet? UGH.  TIA

  All I had to do was copy the lib/updates updates I'm running CF 9.01, BTW.  Thank you

• Update 11.2.0.1 to 11.2.0.2 and apply the patch set update. CARS CARS CARS

  Hi all
  
  I am new to ORACLE RAC, I just want to know how to install or upgrade existing oracle 11 GR 2 on CARS.
  
  We have RAC on solaris 10 64-bit. Here is the result of the database instance.
  
  SQL > SELECT * FROM SYS. V_$ ACTIVE_INSTANCES;
  
  INST_NUMBER INST_NAME
  ----------- ------------------------------------------------------------
  1 testdev1:DEVT1
  2 testdev2:DEVT2
  
  So on sever testdev1 whe running instance DEVT1 and break in testdev2 DEVT2 is running.
  
  Current database version is 11.2.0.1.0... I want to update, or apply the patches 11.2.0.2.0 scheme.
  
  I want to do the upgrade out of Place (i.e. create new oracle home and install oracle)
  
  I successufully standalone update DB (No. CARS) but I'm not having experience in the CCR.
  
  Can you please guide me, or send me the link of the document that I follow to upgrade database RAC 11.2.0.1 to 11.2.0.2.0
  
  See you soon.

  MOS Doc-things to consider before moving to 11.2.0.2 Grid Infrastructure/ASM [ID 1312225.1]

  Steps to upgrade 11.2.0.1 RAC to 11.2.0.2
  http://abbasocp.blogspot.in/2012/03/steps-to-upgrade-11201-RAC-to-11202.html
  http://askdba.org/weblog/2010/10/steps-to-upgrade-11201-RAC-to-11202/

• Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

  Anyone tried the installation with the new Option of software updates?
  
  I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
  (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
  (2) make all configurations with YES
  (3) create ASM disks
  (4) install Oracle Database 11.2.0.2 software only
  (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
  (6) create the RAC (advanced option) with DBCA database
  
  With these steps:
  Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
  
  I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
  
  If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
  
  Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
  'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
  
  I could not find more detailed information on this feature in the documentation and MOS.
  
  Thank you

  Hello

  You can download the latest updates and patches to help with option - downloadUpdates

  ./runInstaller -downloadUpdates
  

  You can use this note:

  * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

  Don't miss...
  * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
  : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
  Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

  Documentation explaining...
  4.5.1 running Oracle Universal Installer
  Download of updates before Installation
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

  Kind regards
  Levi Pereira

• applying the patch 9535311 anf having failures.

  Hi guys,.
  
  You can help...
  
  I connected an SR, but engineers take tym to find a solution.
  Here is the error I get when I apply the patch.
  
  /udd001/app/oraapps/product/11i/appl/FND/11.5.0/bin/FNDLIBR DNF FNDCPBWV & ui_apps SYSADMIN "system administrator" SYSADMIN
  
  
  List of errors encountered:
  .............................................................................
  
  _ 1 _
  Please enter a valid responsibility. The system of liability
  Administrator does not exist or is not active. Check that the good
  short name of the application is specified for your responsibility.
  (ROUTINE = AFPSSC)
  .............................................................................
  
  
  AD worker error:
  The above program failed with error code 1.
  See the AD worker log file or the log file for more details.
  
  
  
  I have check the responsibility and is not dated expiry and its actcive
  
  Thank you

  Salvation;

  Please consult your system administrator has the end date

  For the steps and possible solution please check below thread

  There is no system administrator *.< answered="" by="" hussein="">
  http://KR.forums.Oracle.com/forums/thread.jspa?threadID=918867&TSTART=0&MessageID=3578458 *.< answered="" by="" hussein="">

  Respect of
  HELIOS

• apply the patch 10.1.2.3 on oracle 10g 10.1.2.0.2 application server

  Dear all,
  
  I installed oracle 10g 10.1.2.0.2 with infrastructure and forms & report application server.
  
  now, I downloaded the Patch 10.1 . 2.3 to apply to this topic
  I have two houses in my application server 10g (infra and forms & report).
  
  should I apply first to apply the patch on infrastructure and on forms & apartment house.
  am I right. ? can you please give me the procedure how to apply the hotfix on the server of applications 10g 10.1.2.0.2.
  
  
  Thank you and best regards,
  Shir khan

  Yes, it's true :-)