AutoCAD 2002 running in Windows 7

Similar Questions

• I am running Microsoft Windows XP Home edition Version 2002 Service pack 3, use the 32-bit or 64-bit upgrade to Windows 7 Home Premium?

  running Microsoft Windows XP Home edition Version 2002 Service pack 3, used the 32-bit or 64-bit Windows 7 Home Premium upgrade?

  I followed the instructions on the card that came with the software... indicating that, if I look at my computer it was telling me that my computer works... either 64 or 32, but it does not work.  So my question is, how do you know?

  You probably have the 32-bit version of XP (in most individuals, and if your system properties page does not have 64-bit, then you have 32-bit.)

  However, if you now have XP 32 - bit or 64-bit XP isn't the issue that relate to your decision to install 32-bit or 64-bit Windows 7.  This decision depends on the question to know if your hardware can support a 64-bit operating system.  In this regard, the main reason for users to install a 64-bit operating system is to allow the use of more than 4 GB of RAM.  If your hardware does support more than 4 GB of RAM, there is no interest to install the 64 bit version of Windows 7.

  You run the Windows 7 Upgrade Advisor?  With what results?

  Click Start > run and type msinfo32 in the "Open" box and click OK.
  After the system information window has had time fill, click Edit > select all, and then click Edit > copy.
  Paste (CTRL + V) into your next reply here.

• I have AutoCAD 2002 a 32-bit program cannot install on my Window Vista Home - Premium 64 bit OS. Can someone help me, please?

  I have AutoCAD 2002, a 32-bit program, I can't install it on my computer which has Windows Vista Home - Premium 64 bit OS.
  Can someone help me, please?

  Hi JohnMcLarnon,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks like you can not install AutoCAD 2002, he would be grateful if you can answer this question in order to help you further.

  1. what happens when you try to install, summers - get you any error message or error code?

  2 is the issue limited only during installation AutoCAD?

  3. have you made changes on the computer before this problem?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/Program_Install_and_Uninstall?wa=wsignin1.0

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-installing-or-uninstalling-programs

  Note: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Visio 2002 running on vista and windows 7

  I use Visio 2002 SP2 Professional at work.  I want to be able to continue the work home with her.  My wife and I have 2 laptops - 1 has Vista and the other is Windows 7.  Can I install Visio 2002 professional Service Pack 2 on cell phones or the other or both for use?  If I need a newer version, not the latest, what will work?

  Using the Windows 7 Compatibility Center and the Windows Vista Compatibility Center, they both show that you need to upgrade to another version of Visio to run on those computers. What operating system you use at work?

  You might be able to use the compatibility mode:

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The InstallScript engine on this machine is older than the version reqired to run this installer. Currently have IScript7.dll (dated from: June 2002). Upgrade Windows Vista to Windows 7.

  The InstallScript engine problem

  The InstallScript engine on this machine is older than the version reqired to run this installer.  Currently have IScript7.dll (dated from: June 2002).  Upgrade Windows Vista to Windows 7.  I tried to install Word Perfect 10 on this machine.

  How to install the latest Version ofISScript . MSI

• AutoCad 2006 running slow on Windows 7.

  Original title: AutiCad 2006 running on Windows 7

  AutoCad 2006 on Windows 7 slow course. I usually run 2006 on Windows XP without any problem. You have a solution?

  Hello

  AutoCad 2006 is compatible with Windows 7.

  Method 1: It is possible that any software third is at the origin of the conflict, run the software to the clean boot and see if that helps.

  Reference:

  A clean boot to test if any element of service or third party application startup is causing this issue.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  Method 2: As it works very well under Windows XP, try to run the program in Windows XP compatibility mode and see if that helps.

  See the following steps:

  (a) right click on the icon of Autocad.

  (b) click Properties, click compatibility.

  (c) select the compatibility mode for Windows XP (service Pack 3).

  (d) click OK.

  (e) to run the program.

  If the methods above do not help, you can contact Autocad for additional help.

  Here is the link: http://usa.autodesk.com/adsk/servlet/index?id=7460177&siteID=123112#

• Microsoft Picture It 2002 compatibility in Windows 7 Professional or family

  Help! I NEED MY "MICROSOFT PICTURE IT 2002"! It does not work under Vista! Windows XP mode 7 Professional let me install and run it? It will work in W7 Home Premium?

  Hello justme74903,

  Picture IT 2002 is a program which is not compatible and will not work with Windows 7.

  Because you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I suggest that send you feedback to Microsoft that there are others who feel as you do.
  There is power in numbers.

  Please click here for a link to send your comments.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Are files WordPerfect Office 2002 compatible with Windows 7?

  Can't seem to be able to find converters of data files WordPerfect Office 2002.

  Hello Candleridge,

  Thanks for posting on the Microsoft answers Forum.

  Word Perfect Office 2002 Professional supports Windows NT / 95 / XP / Me / 2000 / 98.
  It is not compatible with Windows 7.

  You might be able to install it in Compatibility Mode, but I don't know if it will work.
  Please see the list below for more information on which their products are compatible with Windows 7.

  Click here for a link to Corel.

  The following Corel products work on Windows 7:

  • CorelDRAW Graphics Suite X 4
  • Corel DESIGNER® Technical Suite X 4
  • Digital Studio 2010
  • Home offices
  • MovieWriter Pro 2010
  • MovieWriter Pro Ultimate 2010
  • Painter 11
  • Painter Essentials 4
  • Painter Sketch Pad
  • Paint it! Touch
  • PaintShop Photo Express 2010
  • Paint Shop Pro Photo X 2 ultimate (Painter Photo Essentials and Media One Plus is not currently supported on Windows 7)
  • VideoStudio Express 2010
  • VideoStudio Pro X 2
  • WinDVD 2010
  • WinDVD Pro 2010
  • WinZip 14
  • WordPerfect Office X 4

  These products have been tested and have no problems experienced when running on Windows 7. They will provide a similar experience with the same product running on Windows Vista or earlier operating systems

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Compatibility with AutoCAD LT 2005 with Windows 7

  How AutoCAT LT 2005 make it compatible with Windows 7.  I'm going from Windows XP to Windows 7

  Troubleshoot Compatibility

  This can help with some, but not all, programs (whereas AutoCAD complex they may be, it's that what follows may not work):
  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.
  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.
  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

  More information on how to make older programs in this version of Windows:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you want to test before you buy:

  You can download Windows 7 Enterprise 90-day trial. It is designed specifically for the professionals, so we have to say that you are a COMPUTER professional. You must reinstall Windows after using the trial.

  http://TechNet.Microsoft.com/en-us/evalcenter/cc442495.aspx

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Mozilla runs on Windows 10?

  Mozilla runs on Windows 10?

  The goal is to make firefox works on windows 10, and it will eventually. At present, there are still some problems with firefox and windows 10, but most of them must be fixed by the time windows 10 came out.

• How to connect to a windows OS to IOS and run a windows program?

  Hi all

  I would like to know if possible to run a windows program (i.e. DIR or WINVER) on a machine windows on the network via a computer of IOS command line is connected to the same network. Basically, I have 2 computers in a network, a MAC OS and the other is WINDOWS. MAC OS I want to run a command of windows inside the windows machine.

  For example, via the terminal in my mac I want to connect on the windows machine, and run any windows program I have in the windows machine.

  I know it's possible to do on linux via the command line WMI Windows Management Instrumentation command-line.

  Do we have something similar to the WMI for IOS command line?

  Rodrigo.

  I'm confused. You mention a PC (Windows OS), Mac OS (Apple computer) and iOS (Apple iPod touch, iPhone and iPad operating system).

  You can get apps that allows a computer iOS to use a computer mac or Windows computer such as LogMeIn or GoToMyPC.

  Yu can also get the app that allows you to use your Mac to access a PC.

• Unable to access Mac files when running in Windows.

  Applied Bootcamp, running El Capitan and Windows on MacBook Pro 9.2 10.  Fine.  This is all OK.   But...

  I want to access my files of Notes from the Mac side.   I can get to the Notes.app in the Applications folder when running in Windows.  I understand that I can read Mac files in Windows.

  I can't get to the actual Notes files indicated in the content of the Note.app folder in the Mac partition.  (Running in Windows 10.)

  Can someone help me with this please?

  Missing Manual instructions ok, so far, but are not real files to open.  ???

  Thank you, Mark

  Windows cannot write to the readers of Mac format.

• C:\Windows\System32\wship6.dll is not designed to run on Windows or it contains an error.

  I can't open windows live mail and other programs that also many installers will not work for this reason.

  I get the following error:

  wlmail.exe - incorrect Image

  C:\Windows\System32\wship6.dll is not designed to run on
  Windows or it contains an error. Try to install the program using the
  the original installation media or contact your system administrator or
  the Publisher of the software to support

  I had to click OK 4 or 5 times to make it go away

  Many installers will not work because of this.

  System information:

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD A6 - 3400 M APU with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5610
  Graphics card: AMD Radeon (TM) HD 6520 G, 512 MB
  Hard disks: C: Total - Mo 595354, Free - Mo 401604; Total D: - 14820 MB, free - 1647 MB; F: total - 99 MB, free - 89 MB; G: total - Mo 953867, Free - 877240 MB;
  Motherboard: Hewlett-Packard, 358B
  Antivirus: Norton Internet Security, updated and activated

  Here's what I did to remedy:

  I had to replace the \wship6.dll c:\windows\sysWOW64 file not the file c:\windows\system32\wship6.dll

  I had to start Windows Recovery Environment, load the command prompt and replace the file c:\windows\sysWOW64\wship6.dll to a system of work w7 (I used an iso oem and 7zip)

  ( 1 copy the file in a place should be on my boot drive (c :) in my case))

  2 . restart your computer , press and hold F8 as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you will need to start over; to do this, hold the Windows logon prompt appears, and then stop and restart your computer.

  3 . Select repair your computer and press enter.

  4 . Select the option for command line

  type 5 bcdedit | find "osdevice" (note that there is a space after bcdedit and | and also find) that will tell you what drive letter to use to access your startup drive (d: in my case)

  type 6 the drive letter followed by a: (d: in my case) and press enter , the guest must pass to < DriveLetter >: (in my case d:)

  type 7 copy < your place should be > wship6.dll windows\syswow64\wship.dll (replace < your place should be > with the full path to where you place the file) (note the space between the .dll and windows)

  If this does not work, you may need to replace syswow64 system32 in all the above instructions

• Satellite A200 - eblib.dll is not designed to run on windows

  My laptop Satellite A200 started giving me warnings saying * eblib.*dll is not designed to run on windows or it contains an error.
  The file has been deleted with combofix c:\programdata\xp.

  I need this file?

  I checked with McAfee and Alvira antivirus plus several spyware and the laptop seems to be clean.
  I had the same problem with odbc32.dll. Replaced by a copy from another computer vista laptop successfully.
  This file is needed?

  The only info I have found says he is Compal Electronics, but does not say what he does or what component it uses.
  Could someone send me a copy of this file, please!

  Help
  Thank you

  Hello

  I discovered that eblib.dll belongs to EBLib of COMPAL ELECTRONIC dynamic links library.
  To be honest I have never heard of this software on Toshiba laptops so I think you can remove or uninstall the system.
  Also clean the registry with CCleaner several times

• How to run dvd Windows(32/64) installation?

  Hello world

  I have a problem with installing windows via Bootcamp.

  Wizard bootcamp 6 works well and he finished the download of the driver and the process of partition.

  The problem is that my mac pro book is unable to run the Windows 7 installation DVD. The installation DVD is for both version (32/64 bit).

  Cold be the type of the DVD the problem? Unfortunately my University give us only this kind of DVD. Is there a way to avoid the problem?

  Perhaps using a previous version of bootcamp?

  Thank you

  Stinflex

  Use the product key that is provided and download an ISO specific https://www.microsoft.com/en-us/software-download/home 'bit-ness". You may need to burn the ISO on a DVD on Mac, who needs an optical drive to install Windows (Mac models before 2012).