Automatic screen to view Desktop lock

Similar Questions

• Windows 7 view Desktop goes into a disconnected state?

  Hello

  I have (1) Office of Windows 7 that enters a State disconnected once the user tries to log on.  I have (4) other VM Win7 in the same pool which are not affected by the issue.  Here's what happens:

  1 user enters the credentials of the AD to display.

  2. the user receives the message "preparing the office" and the screen goes black as usual.

  3. from the console of vCenter, I see that the Win7 Office has the window 'Welcome' screen on the desktop.

  4. the user gets knocked back to the login view screen and the desktop Win7 displays "disconnected" in the admin view.

  5. from vCenter console, I see that the user is connected to the desktop computer.

  6 user tries to log on again views and the screen goes black and back to the login view screen.  View the log of admin user shows Plug and unplug immediately.

  What I've tried so far:

  1 uninstall and reinstall agent view.

  2 reinstall the Vmware tools

  Any ideas would be appreicated!

  I assume you are using PCoIP. And you do not specify what type of pool you are running the virtual machine. Also which users use to access the virtual machine? (see customer, zero client...)

  Review logs inside the VM (C:/Program/VMware/VDM/data logs - if i remember correctly). There, you could see exactly what is happening inside the virtual machine and why his abandonment of the connection.

  Saves the location:http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1027744

  During the reinstallation of the tools and the agent, you must install tools first and then the agent.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1028975

  This could also be the case.

  Good luck

• HP G62 U.S.-340, black screen and flashing caps lock.

  HP G62 U.S.-340, black screen and flashing caps lock when I turn it on, and some time it lights up as it should. I tried draining the power of the unit to reset and it wasn't any help. Can you help me please?

  Hi @mikeyh25

  Thank you for your request, I will do my best to help!

  I understand that when you start your laptop, you get a black screen with no error message, but you see the flashing lock light.

  Here is a link to help you.  The computer does not start and the lights blink or the computer will beep.

  Good luck!

• Black screen when viewing of DTV, can hear the program, but no image.

  original title; Windows XP Media Center Edition 2005 - black screen when viewing of DTV, can hear the program, but no image.

  When I set up my Windows XP Media Center Edition PC to view DTV, I used the Setup etc., XP scanned and found all the available DTT channels. I thought as much, worked for BBC1, BBC2, worked, then I went to view ITV1 and other channels, could hear the noise perfectly, but there is no picture, just a black background. He used to work because I previously installed the computer. However, wouldn't be a difference that the TV signal will of the antenna, in a block of TNT, and then in the computer, there always used to work. I have that, it is not a signal problem because I could watch the TNT cable SCART on the computer and the image and the sound is fine just using the freeview box. It seems to be the Media Center. Please can someone help me? Thank you

  Apparently, this was caused by an outdated ATI graphics card driver. I recommend upgrading your graphics card driver to resolve this issue. Should work fine then

• How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Original title: Confirmation screen.

  How can I see on the screen, if the caps lock key is in upper or lower case when you complete passwords?

  Hi WalterAshton,

  You are welcome.

  If you want to provide feedback to the development team of Windows, visit the Microsoft Web site below:

  http://www.Microsoft.com/en-us/Windows/compatibility/en-us/CompatCenter/feedback

• Iconia Tab 8 W1-810 W suddenly stopped the automatic screen rotation

  Hello.

  I m havving problems with my Iconia Tab 8 W W1 - 810. He suddenly stopped the automatic rotation of screen and now I can´t find the box "Enable rotation of the screen. I have only the chance to put in landscape or portrait, but not in automatic rotation.

  How can I enable automatic screen rotation again?

  I would much appreciate your help.

  Thank you, Justin!

  I tried this, but as I no longer had an automatic rotation checkbox, I couldn t solve the problem.

  The solution came through the cat of Acer service. Acer technician Mukesh was very nice and patient, we tried all possible options, but the auto-rotation option was not available, the only way to recover is to install the proposed pilots:

  http://global-download.Acer.com/GDFiles/driver/platform%20Drivers/platform%20Drivers_Intel_10.18.10...

  After installing these drivers, I got automatic rotation check box and could solve the problem.

  I am very happy that I could solve the problem and very happy with the Acer´s customer service.

  Thanks for your suggestion.

  Kind regards

  Maria Ines.

• I lost the "View Desktop" icon on my QuickStart toolbar. How can I get it back?

  I lost the "View Desktop" icon on my QuickStart toolbar. How can I get it back?

  Hello Ram,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Here is some information on restoring your Desktop Vista view and there are two box to fix for me, one to fix it myself:

  http://support.Microsoft.com/kb/810869

  You can also follow the steps in the link:

  http://windowshelp.Microsoft.com/Windows/en-us/help/45a1b648-87A8-4E1A-86ab-1becc2a581441033.mspx

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get calendar reminders Works will automatically appear on my desktop whenever I turn on my computer?

  I did this on my last computer but do not remember how I did it-program calendar reminders Works will automatically appear on my desktop whenever I turn on my computer?

  Hello

  The initial response is no longer valid because these focus groups were dissolved.

  Now -> Check with the Experts to work in the answers - work Forums

  Answers - Forum work
  http://answers.Microsoft.com/en-us/Office/Forum/office_other

  =========================

  Original - response is no longer valid.
  
  Ask the Experts work here:

  Discussions in microsoft.public.works.win
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.works.win&cat=en_us_9804e2ac-c762-44C9-9c6f-90e45f32d772&lang=en&CR=us

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• View desktop computers is blocked

  Hi all

  I have a problem in my view environment. I hope someone can help me or give me a hint.

  • 1 x Windows 2008 R2 with vshpere 4.1 (full license) and View Composer 5
  • 6 x ESXi 4.1
  • 1 x Windows 2008 R2 with view connection Server 5 (until the end of December trial license)
  • 1 x pool ABC1, dedicated, linking clones, no allocation of user for the moment
  • 1 x pool ABC2, dedicated, linked clones, which is allotted 1 desktop computer

  Since a few days, I am not able to connect with View Client on my Win 7 Workstation physical to virtual desktops. View Client message: "access to this desktop computer is blocked. A few days ago I was able to connect all virtual workstations with View Client.

  Message on the event-DB:

  "Check failed" "connect to Server" "could not launch for user domain\username ABC1 pool: this pool of office does not allow for online sessions.»

  What I tried:

  -Pool unentitlement / right of users/groups

  -Pool enable / disable

  -RDP on successful, view Desktop Agent is installed

  -deleted all the powers of the user on the desktop

  -no tags assigned

  Does anyone have an idea what I can do to connect my desktop PC?

  Hi Toby,

  Global policies, check if your remote control is set to "allow". Although playing all about you would have changed 'decline' which in my opinion, is originally not connect for the desktop, but you can download and run it locally (View Client with Local Mode operation).

  or

  Your your user account which belonged to the small remote desktop users group is no longer part of the group which blocks access to remote desktop computer.

  Above are a few assumptions based on the current changes in administrator mode which blocks access to remote desktop computers. Soultion can vary more information on your side.

  Kind regards

  Pravin

• After the update automatic, could not load desktop under the screen turns off after logon

  Original title: computer running Windows 8 will not correctly restart after automatic updates & close

  I have Windows 8 my computer does not start correctly after it has automatically closed for the automatic updates last night. When I turn on the computer I can connect as user, however once I do it says welcome and the screen turns white. The only thing visible is the cursor if I move the mouse. There is no Apps and I can't get to my desk or anything else. I tried to restart again and press F8 and nothing. However, I can bring up the Task Manager, but that's all. Help, please.

  Hi Patricia,

  I understand that you get a black screen after that it was closed automatically for automatic updates. It might be difficult when things don't work the way it should be on your computer. This problem might have occurred because of the conflicted with the system files update or could be a problem with the display card drivers may be due to the virus/malware infection.

  Many users complain about the issue with a black screen to logon Windows. Microsoft has not yet determined the exact cause of this problem.

  However; I suggest you to please follow the steps suggested by Scott Atk began August 30, 2014 in the following link and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  Please answer us on the State of the question to help you further.

• Windows 7 home first OA: start of the laptop but I have a black screen, but the caps lock button led on and outside

  Dear anyone!

  I need a help of deperate. I have a Windows 7 first OA type HP laptop at home that he is the specification that I have.

  I would write what happened. I always before I close my laptop I chose the tab.and of sleep when I open again is to start automatically, but somethimes I do the Start button. So my problem started when I did my usual close choose the sleep tab and he's fine, leater but10 to 15 minutes, I forgot something and I wanted up, after the start I heard my lap top speed and good early but the screen is pitch black, no company logo and nothing! I've noticed that only a seeing of CAPS LOCK button is on and outside. My question is what is the problem, I hope that no Virus! Or I had to close something? How can I start my lap top once again? Help, please!

  sincerely

  Zoltan

  Try a hard reset:

  http://support.HP.com/us-en/document/c01684768

• T410 AiO customer CAPS, NUM, and scroll keyboard stop does not work with PCoIP view desktop computers

  We have problems with our t410 AiO customers, where the CAPS, NUM and scroll stop lights on the keyboard do not work with view PCoIP desktop computers.

  I found the below information and a work around:
  If you use the Protocol PCoIP to display on a client system Ubuntu 10.04, the CAPS Lock, NUM Lock, and Scroll Lock lights on your keyboard do not work with desktop view. Although the lights do not work, the keys themselves work.
  Solution: Set the following configuration in a configuration file, such as/etc/vmware/config:
  mks.keyboard.useXkbSetNamedIndicator = 'TRUE '.

  The problem is this difficulty is already in place via the latest version of the HP, Z6A440, software that is installed within our Organization.

  What I discovered, is that the model that we initially bought for the test doesn't have this problem.  However, the models that we ordered since that time, DO have the problem and the solution above does not work as expected.

  The model originally ordered for test is still a customer of IOA t410... but there are 4 "under models' for customers of IOA t410... that we have to test is a H2W20AA, while those we receive and distribution are the H2W21AA model.

  No idea why, when connected to the desktop from view, that models of H2W21AA have this problem?

  H2W20AA is with Teradici PCoIP optimized, which can support PCoIP better, but H2W21AA is not with Teradici. That's the difference.

  However, the issue that you are experiencing does not matter in fact, we have not heard of this problem before. I would suggest that you do the following to see if there is no change:

  1. Go to download the latest VMware View 2.3.4 for t410, follow the instructions to install.
  2. If suggestion 1 does not work for you, try to connect to another VM group or set up a new machine virtual clean
  3. Call HP service center to save your problem for further investigation if the suggestion above did not work

• Windows 7 screen/internet page frequent lock-up/seizure.

  I got this new laptop Parkard Bell Easy Note about 2 weeks ago and the running version of Windows 7 Home Premium. After I donwloaded some critical updates from Microsoft, my computer has experienced frequent "screen" or "Internet browser" ' Frost/blocking' The mouse does not work and none of the keys worked Windows. I need to turn off the PC and the re - start each time.
  There is also a lot to come back to draw the problem to restore and restore points does not work anyway because of some antivirus checker or setting preventing fill.

  What can I do to stop this common screen lock-up/frozen, please any suggestions? Thanks in advance.

  Ideas:

  • inside of Internet Explorer (66 bit) program, you have problems with
  • No error message
  • Recent changes made to your computer - after about 8 updates form Microsoft
  • What you have already tried to solve the problem - change the mouse setting, tried the troubleshooting...

  Yes, there is a free 90 day trial, Norton installed in the laptop when I got it in mid-November. I removed a few days ago and got a version of track free 30 days 2010.

  Norton applications are notorious for not properly uninstall. You should have downloaded / run the Norton removal tool before installing Norton (360? AntiVirus?) free 30 day trial of 2010.

  Therefore, I suspect that some 2010 Norton free trial of 30 days was NOT correctly and therefore, does not protect your brand new computer. This puts you between a rock and a hard place: If you had bought some Norton 2010, Norton/Symantec probably for free would support, but since this is a free trial version, you are on your own.*

  If you're really lucky, the following may solve your problem. Otherwise, you're looking at a format & clean install of Windows.

  1. uninstall Norton some 2010, LiveUpdate and Add-ons of Norton.

  2. IMPORTANT: Make sure that the Windows Firewall is enabled!

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step _ below!

  3. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  4. close all open applications (that is, anything with an icon on the taskbar).

  5. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. download/install another antivirus of your choice. (You will NOT be able to install another free trial Norton!) I can recommend NOD32, Kaspersky, Avira AntiVir, Avast and Microsoft Security Essentials (the last three are free).

  7. manually & repeatedly update your new antivirus application until you get a prompt "no update more".

  8 restart in Safe Mode and run a full scan of the system with your new antivirus application, then restart in normal mode (Windows) and keep fingers crossed.

  =================
  * If you need further assistance, post it here:

  Norton Community Support Forums
  http://community.Norton.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7 Enterprise - screen is stuck on the screen 'your computer is locked.

  Hello

  I have a computer for no reason while not using it decides to lock and stuck on the screen "computer lock you."

  I already have several times, power options changes since I work in a corporate environment all the machines are defined with the same question. All the computer we have, this is the 1st time that this issue has already shown. Do not know what could be causing the computer to be lock up on this screen.

  The computer in question are pushed constantly updated and have all the updates of the system. It is a desktop Lenovo M93p 8 GB if ram and a 256 GB SSD running off a Core i7. A reboot clears the problem for a while, but do not recur.

  Event logs see the errors for Schannel, application of group policy management and a problem of Netlogon. Not sure if they are related to the issue.

  Any help will be appreciated

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Screen wide remote desktop

  I have an Asus laptop with a widescreen running Windows 7 and I often connect in my desktop computer with a standard view that is also running Windows 7.  Everything works well EXCEPT that... the differences of means of screen sizes that I have to scroll up or down or sideways in order to be able to read all of the remote desktop view.  I tried to change the resolution on my laptop but it does not help.  My laptop resolution is 1366 x 768, and I think that the normal resolution on my desktop is 1280 x 768.  RDP works well between the two computers, but having to Ahmed constantly down the desktop to see the set of program and then having to scroll to the top and right scrolling of the screen to see the different menus or 'X' as a result of a program gets really annoying.  Any suggestions?   Thanks for your help.

  RDP should not be dependent on the resolution of the remote desktop, it is it's own display on the remote computer, so by default will be rendered by the remote computer in the resolution of your local computer. This is because you do not normally take on real remote desktop but create a separate. If you right click on the shortcut to connect remotely and go to properties > view tab, you can select a lower resolution on the resolution of your local office to distance a window.

  The symptom you describe is more a desktop installation shadow such as indicated by VNC or Log Me In.