B110a e-all-in-one Photosmart don't feel no prob

Similar Questions

• Alles all-in-one Photosmart C7288: Canoe more scan on my alles all-in-one Photosmart C7288

  When I swichted above 7 window tot 10 window, I lost my ability to scan from my printer. While a 7200 inctjet

  the stil printer prints documents but I can't scan my documents more.

  I used the updated software for my printer. In the installation, the system asked for a cd

  This one, I have more someone can send me a cd or someone has another solution.

  Thank you

  Hey @SNAJ,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of the all-in-one Photosmart C7288 printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, uninstall all software associated with the printer to your PC. Finally, download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• HP C3100 All - In - One Photosmart: very old printer and drivers

  I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

  My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

  Thank you.

  Here is your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

  Click here to find your exact model number and check for the drivers and the software Win 7.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

  My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

  Now where can you get such a CD.

  Thanks in advance.

  Shlomo [personal information]

  You can download or order a copy at this link.

• Printer all-in-one Photosmart D110: think there paper jams

  Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

  There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

  So I'll send more information via the Inbox of (private) messages.

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• All-in-one Photosmart HP 3310: black printing in odd rows

  Hello

  I have had this printer for almost 6 years and never had a problem with it until this last week. My impression started out as below:

  

  As you can see, the colors are fine, but black seems to be coming out in lines. As the black cartridge was almost empty, I replaced it and received the same impression. I replaced that one (just in case the cartridge was defective) and received the same impression.

  My printer is out of warranty; I tried to clean the print heads and align the printer several times over the last week and nothing has changed. In fact, every print I do has the same meaning (even thickness, same color, same type [dotted, lined, etc.], in the exact same places every time, which is interesting.

  I tried the reset of the printer (pulling on the power cord for 15 to 30 seconds, and then reconnecting), alignment and clean the print heads in the printer menu, and then on the menu in my Mac, and I tried to get the number online (here and here), but came to nothing.

  I'm currently located in the United States, in Arizona. I understand that it is an older printer, so I may end up having to replace, but I was hoping someone might have a suggestion.

  Thank you

  ~ Leslie

  Hey @TheLastDuchess,

  Welcome to the Forums of HP Support!
  
  I understand that you are having problems of black print quality when printing HP Photosmart 3310 all-in-one printer. I first want to thank you for all the details you provide me in your message. I see you've already replaced the black cartridge twice, cleaned and aligned the print head several times and reset the printer nothing helps. Unfortunately at this time, it sounds like you have a defective system of the print head. The printhead in the unit model is not replaceable part. It reads the cartridges and ink to go on the control document. If this part in case of failure to replace the entire unit would be necessary. According to all the steps that you have already tried, at the moment, you have exhausted the troubleshooting steps. I don't want you to run one more cleans away from your printhead system because it uses no ink in order to rinse the ink for cleaning system. The rule is generally, if cleans 2-3 make no difference, not to go forward with more clean as you will just waste ink.

  At that time, I suggest that you contact our Technical Support by phone team to explore additional options.

  For Arizona, HP Technical Support can be reached at the: 1800-474-6836

  Good luck and happy holidays!

• All-in-one Photosmart C3150: stuck SD card

  I have the above printer.  When you try to load images to Picassa seems to have blocked the SD card too far into the printer.  It didn't load the photos and the SD card will not come out of the printer.  Please tell us how to get at least the card back because I need photos.  Thank you.

  Hey @silverngold92,

  I see you have a SD card stuck in the all-in-one HP Photosmart C3150 printer. To be honest, there is no support measures to help with the removal of this card. I would say that if it is large enough to hold the tongs into the slot, you can power off the printer and use tweezers to guide the card out of the printer. If it doesn't, the only other thing I can think of is to disassemble the printer. Because it is a consumer quality printer, there are no instructions that I can offer to remove the device to access the SD card.

  I would recommend that you give our queue of Technical Support service by phone call. The Technical Support queue can be reached at 1800-474-6836. Normally, when you contact our Technical Support queue, you will be directed to fill out a form to Contact support on the HP website. After that, a phone number and folder number will fill for you. However, due to the age of your printer your product displays as obsolete and not entitled to phone support. Please dial the number manually. When you hear the automated voice and invites you to revisit the site of HP to fill the Contact form, please ignore this. After 5-10 minutes your call will be routed to a technician. Please explain the issue to the technician to see what can be done to address this problem.

  I wish you good luck going forward with this!

• HP Photosmart C309 all-in-One: erase all memory of all-in-one Photosmart Premium C309

  I have a Photosmart Premium C309 all-in-One, which must be recycled or donated.  It seems to be broken because the transport will not return and the error message says there is a paper jam but it is there in no paper in the printer.

  Before you get rid of it, I want to ensure that all memory is cleared of all components.  How can I do this and is it possible if it does not work properly?

  HP inkjet printers have no drives in them until you get something like an Officejet Pro machine series X.

  Printers without hard disks don't keep documents in memory once the power is turned off, the only exception being that sometimes a fax remains a document in memory until they are printed once they are printed, they are gone.

  I took a quick look at a picture of your model and have worked on similar models, none of them had hard drives installed.

  So basically, is it safe to launch it won't be anything stored on it.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Get the message of incoming call on HP 7520 all-in-one Photosmart

  I had a professional hook up my HP Photosmart 7520 wireless all in one.  I have a special ringtone that is put in place for faxes and also

  I get phone calls on this line. Everything works fine, but lately I've noticed when I get a phone call

  a message appears on the screen of the printer saying incoming call Auto answer on ignore or accept. I also get this messge

  for incoming faxes. If you do not click on ignore or accept that everything works well. You will get your phone call and also the

  Fax will print. I do not know if this message appeared on the screen of the printer or I'm just noticing.

  I think I started to get this message calls and faxes. Can someone tell me if this message should always

  appear when you get an incoming call or a fax or is there a setting I need to change to get rid of the message? The message really is not hurt anything if you pretend it isn't there, for incoming call example, message, leave it alone and pick up phone and all is well. The same thing with the fax. I have a distinctive ring of a fax, a double ring, but the message remains displayed "call auto answer incoming on ignore or Accept." If you do not click on ignore or accept the fax starts printing and the message disappears.  I swear I've never seen this message before.  Can anyone share any light

  on this subject? I don't know if I make a mountain out of a hill of the mole, because everything still works, but I

  never remember just to see this message on the printer display screen before and I would like to know if it comes from an update, or if I've accidentally changed something, or if it was always like that and I just noticed. Please, if anyone can shed some light on this, I would be grateful, because I really think that this message has begun to appear even if everything seems to be in working condition. All answers would be appreciated. I know I'm old, but I hope I don't get senile no also. The only thing that has happened between the time wherever I noticed this message is I needed a Java Update and I got a fake virus. This was my tech support-assisted and supported.

  Thank you in advance.

  Hi go_pens,

  Your printer has a feature that allows automatic updates. There was actually a patch last week or the week before for this printer. These updates to the firmware of the printer. I think that your mind is still intack, I believe, you're not senile.

  I don't think the message appeared on the printer before, I guess you're right, and that the update made this change. In addition to the automatic response accepting faxes for you, you now have the possibility to accept or ignore the fax before that the automatic response accepts the fax.

  I hope that this addresses and solves your request! Thanks for joining the HP Forums. If there is anything else, we can help do not hesitate to ask.

• All-in-one Photosmart HP 6525: HP Photosmart 6525 stopped properly print in black

  Happy Friday! I had a problem the last two weeks with my printer. I usually use the printer on a daily basis for school. I got the impression during 1 1/2 to 2 years and have not had a problem until now.

  Here is a list of what I've tried so far:

  • Aligned the printer
  • Clean print heads
  • Restored by default
  • Erased the vents on the ink cartridges
  • Clean the screens between the printer and the cartridge

  I did all the steps that I could find for troubleshooting on the internet. Is there something else I can do?

  Hello @chawna,

  Welcome to the Forums of HP Support!

  I understand that you are not able to print black ink of your HP Photosmart 6525 e-all-in-one printer. Thank you for all the troubleshooting steps you have already finished before reaching out for support.

  Unfortunately, at this stage, because you have already completed, troubleshooting steps listed here, the next step would be a hardware replacement as system within your camera HP Photosmart print head is defective. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head is defective in your printer printing system is defective. On this model printer, printhead system is a non-replaceable element.

  I highly recommend to go to the Technical Support queue by phone in order to explore the additional hardware options.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  When you talk with the phone support agent, please notify them of all the troubleshooting steps you have completed and the results of these measures.

  I wish you good luck going forward with this!

• All-in-one Photosmart HP 3310: colors may not print correctly on A4 photo paper.

  My HP 3310 printer gave me great prints for many years, but during the last 12 months, 210 x 297 mm prints threw a desaturated look and brightness has dulled as well. My photos 10 x 15 cm print perfectly.

  I did all the recommended suggestions, cleaning of the print head, aligning the printer even restore to factory default to no effect.

  I use Spyder Pro 5 to ensure that I have the exact colors on my screen.

  I printed via the printer settings and also the settings of Photoshop.

  At the present time, all my photos contest must be overexposed and strongly saturated for previously appreciated results.

  I only use HP photo papers and real HP363 inks.

  I hope someone can put an end to my frustration.

  Welcome to the HP Forums @-g_s70

  I came across your post about the problem you are having and I wanted to respond to help with my suggestions. Please see the guide below to resolve this issue. If the problem persists after resolution of the problem, please try to call the hotline to discuss replacing the printer or the rating of. I'll include contact info HP below to directly reach.

  HP Photosmart 3100, 3200 and 3300 Series all-in-One - the printed colors are not colors should

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear