Barcode Pixellisant

Similar Questions

• Pixellisant when you press the screen - MBP w / retina

  Then... I'm a bit overprotective of my stuff from Apple - start w / that.

  I accidentally pushed my thumb up against the screen and there were some comments/pixellisant (don't know how to call it) which disappeared when I took my thumb off the screen.  Further, I'll make sure not to put pressure on the screen when opening - but, is this normal and is there problems in the long term be wary after doing this?

  Thanks for being patient with me...

  If it is a thing of the time, there is nothing to fear. Just use your Mac as you normally would.

• After printing bar code for Firefox 20.0.1 using font 39 barcode when scan it doesn't work it's good in older verson

  I request the use of what print us barcode that's good up to version Firefox 20.0.1 race update. After updating, I print barcodes, but I can't scan it properly. Work in the previous version of Firefox.

  a solution to this i see in version 19 and 20 different impression fonts so I change my increase the size of fonts bar code so my problem.

• Download windows appears in the Firefox browser with barcode scanner input.

  When in a text field, I have entry with barcode scanner, a download window appears in the Firefox browser. Although a law of bars as a keyboard input device, it does not present the download window. I blocked the download option in the firefox browser (Tools-> Options-> general-> download Unchecked options) nothing happens, even I disable java script. To download windows appears in the Firefox browser with barcode scanner input.

  IE (any version) is not displayed it. What can I do? Can someone help me. I'm developing an ERP system, which is dependent on browser and I love Firefox!

  Have you started Mozilla After unchecking the window downloads to show when downloading a file?
  Could you provide your photo under the general tab of the Tools-> OptionsMozilla?

  Thank you
  Borian

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• How to print USPS barcodes on envelope Word?

  I use Word to print envelope address labels. Is there a way to link and print the file Zip + 4 barcode above the address?

  Hi treetopguy2028,

  You will need to check with Microsoft about the ability for Word print postal bar codes.  I found an app called EasyEnvelopes in the App Store, which claims to be able to include USPS Intelligent Mail barcodes in the address.  https://iTunes.Apple.com/us/app/easyenvelopes/id450882552?MT=12

  You can find similar programs by doing a search in the App Store.

  Hope that helps...

• Do I need a Barcode app

  I was wondering if I needed something like NeoReader (barcode scanning application).

  What guys do you use on your Defy and/or what would you recommend?

  Its mainly to find things quickly on the market.

  I use an application called simply "Barcode scanner" by ZXing Team. Maybe

  the most used on the market and it works perfectly.

  Sunday, January 16, 2011 at 08:27, rabpaul

• I need to read barcode using visa OR and store it in file .text

  Hi all

  I need to read to Barcdode using communications series (OR visa) and store it in .txt) file...

  (I have attached series vi read file... here I can able to read codes to bars, but quickly it goes to zero...)

  Hello

  have you checked on the examples of series communication delivered with Labview?

  In addition, if you want to send the data to the port of reliable succession, I suggest to use a cleaner approach - pack your data of barcode in a significant data structure. The data structure would look like AUT like this: 1. start of data (described at the beginning of the data packet), 2. data bar code, 1B. end of data (described at the end of the data packet) and 4. checksum of data (apply only 1 a or 1 b, whatever you prefer). If you plan to add additional information to your package of data later, this would be really easy to change. This way you can also check if the data got lost during the transfer, notify the user.

  You can take a look at how to read this data package here (set up a loop of producer-consumer, although not necessary):

  https://decibel.NI.com/content/blogs/kl3m3n/2014/10/17/serial-data-send-with-CRC-cyclic-redundancy-c...

  Best regards

  K

• Beating of camera when scanning barcodes?

  Everyone uses the "Barcode Scanner" by ZXING app off the market from Lenovo (same thing is on GM)? When I use my camera repeatedly made horrible clicking noise to the point where I was worried it may physically damaging himself. I have E-mail ZXING and they said that development of racking/rampage is a normal part of their software, but I always have a feeling that what is happening on it not healthy (that or I have a camera that is broken).

  -FDP

  
  

• QR barcode Code problem

  Dear all,
  I am doing a project. I need detect code and QR Code barcodes. The issue I'm having is that I can not detect them simultaneously. I push a button for Code bar, it is scanned and detected, then I have to press another button for QR code, then it gets scanned and detected. Therefore, I can't back them up in a row. I get data such as the attached picture. The problem in this is that the bar code represent student, and when I search the database using bar code number, I get nothing, because this line had no QRCode. I want them to appear in a single line. HEL ME PLEASE! THX.

  
  

• Barcode entered in parallel

  Is it possible to read the two entered barcode by two different applications running in parallel in a single processor?

  
  

• Printing of barcode using LabVIEW in Zebra GT800

  Hello

  I GT800 Zebra printer and I am trying to print a barcode 1 d with label using LabVIEW. I connected my printer via a USB port. What commands EPL must I give in order to print the bar code?

  Well, before I was using .net and a printer connected in series, and we just called a shell command to copy the file on the com port with a command like "COPY /B PRINT. PRN, COM1.

  I don't know which would be too much work to LabView, but there may be more elegant ways. I've never done no direct printing of labview so I don't know, but a quick bit of Googling (which I'm sure you can do it yourself as well as I can) seems to suggest that using the exec command vi system is the way to go.

  To access a port USB printer can be more complicated. One way is to share the printer on the network and then map to an LPT port with a command like somethng "net use LPT1-" from a command prompt (you can view the help on this command, because it comes just from memory) - then it becomes directly available on the back and you can use the COPY /B LPT1 command to send your file to him. ".

  If someone has a better suggestion for sending data to Labview to a printer, then I would like to know.

• How to check duplicacy of barcode?

  My bar code scanner does not work properly, I want to check if the barcode, I joined the help that the 2d scanner is not reproduce, such as the same if read barcode scanner labview should interrupt "barcode read. Kindly help.

  
  

• Barcode Excel and read the data

  Hello

  I'm creating a program where I would like to scan a barcode in LV and there LV scan a spreadsheet excel for this barcode and returns the data in this row. I found an example online that allows the discovery of bar code number in excel, but I'm not coming with a strange issue when you try to view the information in this row. My program is the correct barcode in all cases. Only when I get the number of rank 1 line information will be correct. When I enter the information in row 2 lets say it shows the information of line 3. When I enter the tier 3 program line 5 information display. Attached is my draft of the code (this is my first stab at ActiveX control so bear with it please) and a worksheet example I created with some information on how the program works. I have checked the other posts for similar problems and could not find one this hepls with my particular issue. I also checked the thread specific excel but found no link to the code that can help. Any help is appreciated. IM thinking that I'm more looking for something, but since this is my first shot at this type of programming im not very well what it is. Thanks in advance for any information.

  NYC says:

  The other thread is not VI or Excel.

  I'm curious to know what is happening in the VI, but I can't open it.

  It's the same question, except that this time the OP has provided a follow-up saying: ' OK, here's what I got, and it does. ' " Why? "I would have just kept in this thread. No matter what.

  In any case your mistake is that you don't want to connect the line found on all of the methods of Range.Item (get). You must connect a constant of 1 for 'Row' parameters for these two. As you operate on a found range, you don't want to change the line.

  As it is now your VI does not close Excel when finished. The Excel process continues to run in the background. See the example with LabVIEW, which closes Excel when finished.

• LV does not print the barcode fonts

  

  It's the VI, I created to print a barcode. I set up the type size and police and then sent to the printer. But LV does not print the right font. When I made the same format in WORD and print, print correctly.

  Barcode font, I used is not installed on the local PC, but it is available in the printer driver. I guess this is the reason why print all fines. WHY CAN'T LV?

  You can simply use the TCP protocol to establish a connection to the printer on port 9100. The printer is set up to automatically close the connections that are inactive after 5 minutes. If you send only from time to time the label you must close the connection and reopen it when you send the next label. If you send a relatively steady stream of labels, you can leave the connection open.