Battery charging: connected - not charging
Drink spilled on keyboard last night - watch battery icon now ' Plugged in French - no charging current " -ideas how to cure this?
Frankly, a laptop is not something that the casual user must try to repair, you should consult a qualified help (i.e., a reputable repair shop or a certified recommended by the manufacturer) for repairs.
'Christine-Plymouth' wrote in the new message: * e-mail address is removed from the privacy... *
Drink spilled on keyboard last night - watch battery icon now ' Plugged in French - no charging current " -ideas how to cure this?
Tags: Windows
Similar Questions
-
HP Pavilion 17 Laptop: battery connected, not charging AND battery unaccessable
In recent months, at one point, my battery would indicate nn % (plugged in, does not support) and maintain this accusation so much it was plugged. Running on the battery, the charge would eventually diminish and in order to get the battery charge again, I went through the process of uninstalling the compatible battery control method ACPI in Device Manager. Usually within 24 hours, choses things would be back to plugged in, does not support. However, that is no longer to fix the problem. (When it was a question the indicator next to the place where the power adapter is plugged blue flash. Also, I upgraded from 8.1 to 10 a few weeks ago, but this question was held for a few months now).
Now the battery is 2% (plugged in, does not support) and when I use the HP Support Assistant to check the battery, I get the message "control of battery HP could not access the battery. I did a hard reset, reset the BIOS and updated the BIOS, to anything will do. If I unplug the adapter, the computer turns off.
Suggestions of additional corrections? I saw a further suggestion to perform a system recovery but I did not yet a recovery disk to win 10 (I don't have one for victory 8.1), and it would make a difference anyway since no plugged in, charging problem took place under win 8.1?
Hi @shmay7,
From the information provided, I think it's a problem with the connection between the laptop and the battery. It might be something wrong with the point of contact between the battery and the portable or to the battery circuit. It is better to have another battery, so you can try it with the laptop. The creation of recovery media should not be affected by the problem of power with the battery is not installed.
-
Tecra R850, battery "plugged in, not charging".
Hello
I'd appreciate some thoughts on the problem.The problem:
The battery is not charged. The icon in the status bar indicates that the battery is "connected" but that it is 'not charging' and 'remember to change your battery.
Something similar to:
https://BD23.HTTPS.CDN.SoftLayer.NET/80BD23/142.4.51.106/images/consider-replacing-your-battery.PNG
In addition, the battery charge indicator is offWhat happened:
I was using the computer on battery power. During use, the message appeared that the battery is critical 3% and computer suddenly stop (or went to sleep/hibernate). It is possible that the battery was empty, since I was not charged for 2 days. Which was weird, is that I do not have the message that the battery is at 7%, which is normal warning that I get.
The next day, I plugged the computer power cord started. At the start, computer called I want to boot into 'Safe Mode' or 'Normal '. I selected 'Normal '.
Then I noticed the problem described above.History:
Nothing in particular. Notebook is less than 2 years old. Battery was at six, now has dropped to about 4 hours, but had no previous problems. No power surge, does not drop the computer, etc...Comments:
-L' computer works without battery, only on the power cable.
-L' computer does not react if I put only the battery, without the cable, even if it is said that the battery has 9 percent. (he says there are 3% before the initial stop, however)
-When I plug in the power cable, the battery charge indicator is on for 2-3 seconds (in orange) and then is off. This happens whenever I take the cable out, then in.
-What is strange, is that every time when I disable networks wireless/mobile using "Flash Cards" and restart the computer, they are 'on '. Previously, this situation will only occur when the computer crashed, or I made him stop (holding the power button)
-J' tried what was suggested on the forums of Toshiba:* 1
§Remove cable power, battery, clean contacts, put everything back in place
§Leave to load a few hours
-> Indicator battery charge was not on a few hours after the* 2
§Remove battery, start the computer
§Go to the "Device Manager".
§Uninstall method to control compatible ACPI Microsoft battery
Computer §restart
§ ACPI Microsoft settle again
Computer §shutdown
§Put battery, start the computer
-> No change, still do not charge, indicator is not lit* 3
Also have interpreted 'Factory reset '.
§Apres recovery and restart, there is no change
§Cela time, when I turn off the networks wireless/mobile using 'Flash Cards', they remain "off" even when I reboot a computer, which was not the case prior to 'Factory reset '.
§However, if I take the feeder and then place it in (while the computer is turned off) and then start the computer, wireless/mobile networks are once again 'on '.Any thoughts?
Thank you
MiodragOn the picture, information is displayed: consider replacing your battery. This means that the battery is defective somehow.
I guess you need the battery help, another tested good original.
I don t Jules Destrooper that there is some sort of problem since you've already tried the factory reset recovery software and computer laptop. Problems of software, this procedure should resolve any software related issues. But it was not.
-
HP 10 G2: Do not get the battery charge icon
Just got a new Tablet 10 2 HP and tried to charge the battery for the first time. Online user manual deduces that the Tablet is not on to load. So, I'm not turn it on. The USB cable is connected with the Tablet off the coast.
According to the user manual, when I plug in the USB cable I should get a small icon of recharge of the batteries in the upper right corner of the screen, but I did not. The screen remained black for nearly 30 seconds, and then a large battery icon displayed in the middle of the screen, indicating approximately 56% of the fees. This large battery icon remained on the screen for about 10 seconds and then the screen went black again. After a little experimentation, I discovered that I can get the large battery icon to display on the screen momentarily by briefly pressing the power button. When I type the swtich the large battery icon appears for about 10 seconds and it shows the current percentage of charge.
It would be nice to get the small charging of the battery icon in the upper corner of the screen just to know that the Tablet is load... rather than having to hit the button on / off whenever I want to update load. Is it possible to get the low battery charge icon or is that determined by the version of Lollipop? My Tablet uses Lollipop 5.0.
Any help would be greatly appreciated. TIA.
Jack
Each Android HP Tablet I belong to, or borrowed (as part of their program of experts) has not lost any charge the battery by displaying an indication of charge "all the time".
Looks like your tablet is behaving normally. State of charge is displayed when you ask.
WyreNut
-
How to control the battery charge when you are connected to the power adapter?
I post here because I want to know if there is any software option that I can use to control on my load while I use the charger and the dough.
EXPLAIN
You know in IBM ThinkPad there are some utilities can help you master the power to CUT the battery charge and keep on the power of the charger and the battery is always on standby if it is OFF the bettery then work and never lose anydata
I want to control the load while I'm working with battery and charger at the same time.
I hope that claire ;)
Hello
It of not possible to control the battery charge using any software.
The battery will begin to charge if the adapter has been connected to the laptop and it will stop the charge process after the adapter has been disconnected or if the battery is full.See you soon
-
EliteBook 8540w: battery - battery load, but not charging
Hello
My HP elitebook 8540w works perfectly accept for one small thing, the battery. The laptop is bought in 2012.
When my battery is mounted and the AC is plugged in, it is said: connected Ac, battery charging. But in fact the battery in the logo remains static, and it does not charge. It's already a second new battery (first, I asked the supplier of spare batteries to send a new one, ordered through parts EET, accepted HP dealer for replacements).
When I run hp support assistant, he says: the battery is faulty, replace immediately.
Underneath, it gives the code: 9LN162-000000-XD7U3F-C0CU03
This was also the case with the previous "new battery." Same code.
I lost faith in the assistand of support from hp on this part, since it is already a second new battery...
I've tried all - remove driver for battery manager and holding down power button and other things.
Does not work. The fault could be in the laptop?
Help, please?
Niels
I contacted the service to call hp and they told me that the error code is not really explain anything about the specifics of the problem. It's probably the connection between the motherboard - battery and AC adapter plugin, because I tried different batteries, adapter, software reinstalls etc.
One thing however, HPA, he says that the status code is 0c. I have not encountered this code while browsing the web, you may know what it represents?
I will contact a repairman to do the hardware checks, since I am out of warranty.
Thanks for your help!
-
should I let my battery charger permanently connected
Should I let my battery charger permanently connected?
Hi pjk1954.
It depends on you to have the AC adapter is plugged into the computer or remove when the battery is fully charged. However, what allows to stay in charge of the AC adapter / CC of the computer will have no negative impact on the computer or the battery.
Note: If my post answered your question, please mark it as an "accepted Solution".
-
My laptop caused a lot of problems and I don't know why. This is beacause of my driver problem? By the way, my laptopn was bought in year 2007 while the driver is old enough so it's because of my driver? My battery seems fine, I bought it not too long because my previous charged was broken and the new charger autour cost $99.So can someone help me?
You have a hardware problem-the battery, the charge adapter, the connections between then, or maybe even something else (I can't say without testing). It is possible the battery you bought is not exactly compatible with your system, if it was not EXACTLY the same battery. I recommend that take you to a repair shop of computer good reputation for service and a diagnosis of the problem. You could also send it to the manufacturer for service. Compare the costs, the calendar, warranties, parts availability, reputation and any other factor consider you important and make your choice.
Why are removing you the battery in any way - why isn't she always left in the laptop and the charger plugged in during the night (even if the system is stopped) in order to regain full battery charge and this problem never occurs (even if you still have a problem that needs to be fixed - at least irritation will decrease until get you it fixed)?
And what driver are you talking about? You said nothing about what driver for this device or is that the problem or when it occurs or when he started or whatever it is - and we have need to know these things to help.
I hope this helps. Please answer the questions above before repair in case we discover another possible cause that can avoid this need.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Charge battery / charging not
I replaced the HP dv6 - 6090ee used battery with HP C62 battery (MUO6XL) (new) n serial: 6BUFV 3 M HK3L SM2. Part No.: 593555-001
10.8V 4910mAH
Plugged for (AC > adapter connected to the wall outlet) status will clogged the battery charge at no load and light load also change color from red to white some time on 20%, 45%, 65% and 95% fees remain in battery & after awhile even the status will plugged in charge & will light red, HPSA > troubleshoot > power, thermal and mechanical test result > OK status.
Is - this compatibility issue?
Kind regards
HP DV6-6090EE
SERIES No.:[personal information]
PRODUCT NO.: LM596EA #ABV
BATTERY: 6BUDU02SPZWL4Q (OLD) not any question about the load / don't load with old battery
ADAPTER: WBGTE0BHHZZD8UMinhasAccording to the guide maintenance & served, this isn't a battery that is compatible with your laptop.
Contact the vendor for a replacement that has a HP references I listed in my previous post.
Best regards
ERICO -
I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone. The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?
Probably there is debris and dust in the decision-making of the lightning. Serve with compressed gas canned (NEVER orally). If this doesn't help, try electronic contact cleaner has a q - Tip. Finally, take it to Apple.
-
Satellite A200-1UQ - battery charger does not work
Hello
I myself 1UQ A200 and my battery charger does not work.
BTW Im from Türkiye.Can find the original, if I can't use universal battery charger?
Thank you
On the Toshiba site, you can search for a compatible charger and the reference number:
http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PCIf you have the part number, you can search with Google for this number. If you can t find something, you need to contact an authorized service provider. They can order all the parts of Toshiba.
I hope I could help a bit.
-
My battery is currently not defined charges to 80% and it is constantly in charge up to 100%. I want to free up to 80%. How can I change this? my laptop is Sony Vaio.
Hello
Why do you do this? Most recent type lithum batteries must be fully charged that Sony has
implemented.Sony - Contacts
http://eSupport.Sony.com/us/Perl/contact-land.plSony - drivers
http://eSupport.Sony.com/Perl/select-System.plSony - Support
http://eSupport.Sony.com/Sony - Forum
https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport====================================================================
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With
systems today, the premiums is not a problem.
Here are some tips to help and troubleshoot battery issues.Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Try this - to make a Restore Point
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
RESTART which will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
ages 7 months and a battery that will not hold a charge for at least 10 minutes
My HP pavilion Entertainment PC is 7 months old and a battery that will not hold a charge for at least 10 minutes. In addition, the battery icon says "fully charged, do you replace battery.»
With batteries which cost $129, I'm a little ticked off. I can't find information - anywhere on this site!
The guarantee covers a dead battery?
I bought 5 HP because of their excellent warranty. But this, honesty, will be my last, if the battery is not covered.
Thanks in advance for the advice and guidance!
Wow, awesome! Thank you very much! The only thing you could have said or done was better deliever the new battery!
-
Plug in not charging (battery meter indicates "Battery charging disabled"
I have Dell Inspiron 3521, stop all of a sudden my laptop.
I also checked it in the battery meter indicates battery charge disabled.
2 days before I have upgraded to windows 10.
From now all my drivers are up to date.
I also checked my power adapter and battery operation.
In the BIOS it showing 90w, battery performing normally.
I also did restore defaults in the BIOS setting by pressing F9.
Please help me, I have no why it happens suddenly. The health of my battery is quite Normal.
The State of the battery meter is attached.
Hello
Thank you for bringing this to our notice.
We suggest also to follow the same steps as the references and also let us know if there are additional problems.
Thank you
Robin
-
The battery charge falls even when it is plugged into the satellite series
I have a laptop satellite and although it recognizes the power adapter when it is connected and that the icon in the taskbar shows "load", the percentage of the battery charge seems down.
It is only while the laptop is turned on, because it does not charge the battery when it is turned off.
I didn't know that he used the power of the battery so that hip, so I'm puzzled by this not only why the battery doesn't seem to be in charge, but also why the battery seems to fall once the laptop doesn't have to use it anyway.Any help is appreciated!
Hello
I saw this problem on my own laptop in the past. even if the laptop is charging, the battery seems to fall in charge.
This indicates that the battery life is coming to an end, there are a limited number of cycles of load for a battery before it dies.
Also when you have the computer is off fresh is always lost at a considerable pace, because the battery is good, "die."You can't do anything on this issue except to buy a new replacement battery for your laptop computer to a repair center authorized Toshiba. This should answer your question.
-
Satellite 1130 battery charge problem
Hi, just joined this site. I have a Satellite 1130 and seem to have a battery charging problem. Every so often, without regular pattern or a set of events to help the machine starts beeping and the Red charge blinks, as if the battery charge runs out, it is, but it happens when the charger is plugged - green power light shows that it is connected, but it is not the battery. The only solution I found is to turn the power off, disconnect the battery and back again. Then everything works until the next time.
Any ideas?
[Edited by: admin April 23 05 18:07]
Hello
It is possible that there is a problem of electronic power supply. If the power supply microcontroller detects an error lamp DC IN sends a code flashing (8-bit error code). Can you please check it if the led blinks 8 times sending the code?
You can try to contact the Service partner, explain the problem and I'm sure they can give you a clear explanation.
Maybe you are looking for
-
Messed up after updating ios 10 notification sounds
I have updated to ios 10. Incredible update and im love it. But the notification in application as whatsapp Messenger is messed up. Whatsapp defining its 'Note' but when I get the notification I get "Tritone". Although even i change the default setti
-
I have inadvertently deleted and right clicking my bookmarks on my toolbar icon. How it reinstalled on the toolbar w / my favorites
-
Selection of Apple tv 4 languages
I only French on my language selection list 4 apple tv... Is this normal? How can I get more languages (especially English and traditional Chinese)? Thanks in advance
-
When you try to go to Gmail, the tab does not open and said only: "loading."
For the last three days, whenever I try to go to Gmail, tab Firefox says "loading" and does not open gmail. Gmail works fine on Internet Explorer on my laptop so I know that's not Gmail. No error, it just keeps trying to load for as long I let the op
-
USB-6501 and opto-coupler SFH615A
Hello I'm driving an opto-coupler (Siemens SFH615A - spec link attached) using the USB-6501. I am really a beginner and I am looking help on how I can connect it. I have tried a few options already but no luck. http://docs-Europe.Electrocomponents.co