BES integration tests

Similar Questions

• BES Email test

  Hi all

  I have test BES with the BlackBerry device Simulator. The main goal of this test is email and mail retreival. I see a strange problem and I don't know if this is normal or not.

  When I connect my Simulator via USB, Enterprise activation coup and my mail client is set up, I am able to see the records and the name of the mailbox on the Simulator. With the unit plugged in, I am able to send me an email and see it pop up in the Simulator.

  I understand there are some limitations for the Simulator, but I think that if I disconnected the Simulator and sent another email, the next time I connect the Simulator, it must synchronize this email on the phone. Is this correct?

  Currently mail go to the Simulator if it is connected through the same USB port if the message is sent. What I'm missing here? Something seems wrong with that. I need to have the possibility of messages get newly received when it connects via USB.

  Any thoughts?

  The Simulator is not supposed to act as a replacement of the device so that this behavior is probably expected, if the included emails arrive on a real device if it loses the coverage then returns.

• Error code 2000-0123 Msg: memory - integrity Test failed

  I have a DELL XPS9100

  [Admin note: personal information]

  [Admin note: personal information]

  Maintain the label [Admin NOTE: maintain the label removed in accordance with the TOU strategy]

  I also ran SEVERAL other tests - including Windows 7 memory test - it past

  Test of Stress System (manual)

  everything happened, but...

  Advanced Pattern testing
  Test started		17/06/2016-21:15:17
  Error message:	The written model (5555555555555555) did not match the model read (5555555755555555) the physical address (000000025F55B088). In contrast to the model: 0000000200000000.	17/06/2016-21:15:51
  Completion test:	Failed (error code: WME22-0V0)	17/06/2016-21:16:05

  file:///C:/users/CC/desktop/test%20Event%20Logs%20-%20system%20Stress%20Test.html

  teenscrapbook

  How to isolate tests of simple modules; knowing which module I test so that I know if I need to replace it

  teenscrapbook

  If you have two or more modules of memory installed, remove, reinstall one module, and then restart the computer and run the test, test messages no error, reinstall an additional module and repeat the test execution, if the test messages no error, repeat this procedure on all other modules.

  Studio XPS 9100 service manual is HERE:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_studio_xps_desktop/Studio-XPS-9100_service%20manual_en-us.PDF

  Bev.

• Reset the State of the permissions for the BBM integration tests

  For the purposes of testing, I want to cancel my BBM surveys application registration and clear all permissions for this.

  Now when I remove and redeploy the application, he recorded again but do so without up permissions dialog window to ask if I want to allow it to access BBM or not.

  What should I do to get that back? If I go to the window of permissions of Applications in the settings (which is extremely buggy, incidentally) and disable the authorization of BBM, it does nothing but block the application to use BBM.

  Try to change your application id then. (The in the bar descriptor). That * has * to work, by definition. If it isn't, then you're doing something wrong, I think. If you change the id app, it's actually a different application.

• Jasper reports integration test error during instalation

  I try to install f860_JasperIntegrationTest_1.3.0.2.sql but I don't know what's going on, how to fix this? Here is the screenshot with DB and APEX worm err.png trial download

  Hi Jerry,

  No, you don't have to install the DB level. If he could hold the record, he came/JasperReports/apex/folder. Inside, it was home to the f860_JasperIntegrationTest_1.3.0.2.sql file. You must import it into the Apex development workspace where your applications.

  And you'd go to test your web server installation you chose and some reports of demo.

  Good luck.

  Benjamin.

• TS130 repeatedly crashes after 1 1/2 years. Lenovo Solution Center passed Test

  My TS130 has the simplest configuration, with only 8 + 4 GB of RAM, a 500 GB SATA HDD.

  After I bought this server, I used for a year and a half with no problems, running CentOS 6.4. Recently it repeatedly crashes, on average once every two days.

  I tried CentOS, Ubuntu 12.04 LTS and now Windows 8.1 6.5. The problem is the same, automatic system reboot or freezing.

  I tested the RAM and HDD with DATA SMART Bios MemTest and Ubuntu. Now, I tested the system with Lenovo 8.1 Windows solution Center.

  Here is the result of the test:

  Advanced memory integrity test

  Past

  PCI Express Test status

  Past

  Diagnosis of storage devices
  Test of the SMART State	Past
  Targeted reading test	Past
  Try to search randomly	Past
  Test research of the funnel	Past
  SMART short self-test	Past
  SMART drive self-test	Warning

  Any help will be appreciated.

  Ah! Kingston memory will definitely cause your system down. Kingston memory does NOT work properly with any system of Lenovo and is responsible for the crash.

• Smartphones from blackBerry Desktop Manager does not connect to BES

  Hello

  I'm trying to connect a BlackBerry (device or Simulator) via USB for our BlackBerry Enterprise Server (BES). He worked for another instance of a BES and also a BES express test. We are using Microsoft Exchange. So I have a couple of Outlook profiles. When you start the Desktop Manager, I select the profile according to the connected device. Communication between the Desktop Manager and handheld works well. The only problem is the connection to the BES.

  Device Manager displays under bridge "Connecting" (somewhat similar, it is not executed in English) and the name of the server is "srp.eu.blackberry .net: 4101. Then it tries to connect to the internet instead of the local server for BlackBerry. With other BES servers he was always showing the IP or the local name and the connection was set up immediately. Unfortunately at the moment I have no other BES to connect to.

  I searched my local registry for the parameter in the Office Manager, but just under HKEY_CURRENT_USER\Software\Research in Motion\BlackBerry\PINData of the correct (as S12345678) serviceUid of our local BES server. My problem is, I don't know how this serviceUid is mapped to a server name.

  Our license to a BES 4.1 which has been updated to a 5.0, there may be a few old settings that block the communication.

  Question: whence the Device Manager get the address from which it connects? It appears in the Exchange? Or in the BES (global or with the user)? Does the Desktop Manager searches for the name itself?

  PS: Desktop Manager 5.0.1.42 (25 Sep 2010), 6.0.0.13, BBDevMgr 4.1.0.14 Device Manager

  Finally, I found the solution! It's pretty simple if you know where to look:

  '' Cause. ''

  Routing server (RPS) Protocol address was listed as a server name. The host router only accepts connections from localhost. »

  KB18489

  In the BlackBerry Administration Service you should check the settings of the PRS. This is in the instance of the component dispatcher. In the section "RPS addresses" is only the value 'localhost' authorized. Someone here enter the name of the RPS server. Now when I enter just "localhost" the device series (by USB) works again

• Test a custom PdxSerializer

  I wrote a custom implementation of the PdxSerializer to use in my Gemfire cache and I was wondering how I can get Gemfire to call my serializer custom in my integration tests. I have a local Gemfire cache put in place which is an instance of my custom PdxSerializer, but when I do a put option in this local cache the serializer is not called. I understand that this is because serialization is not guanteed to occur in all scenarios, but my question is how I can guarantee the serializer used for my tests? I worked around the issue in the past by establishing an external cache server and then run my tests with a client cache with the game of political data to 'void '. This configuration called the serializer but wasn't ideal for a stand-alone test. Is there a configuration you can recommend where I can perform an independent test where my serializer is invoked? If not, is it possible that I could use some of the internal API of Gemfire for artificially call the serializer without establishing a cache instance? Thank you!

  Oh, sorry. You will still need to cache with this code. Here is a complete example.

  cache.XML:

  
  
  
  
  
  
    
      
        com.gemstone.gemfire.pdx.ReflectionBasedAutoSerializer
        
          Trade
        
      
    
  
  
  

  Simple test method:

  private void testPdxSerialization() throws Exception {
    // Create object
    Trade trade = new Trade("MHS", "MHS", 100, 55.33);
    System.out.println("Created: " + trade);
  
    // Write the object using the PDX serializer (defined in cache.xml)
    byte[] serializedValue = BlobHelper.serializeToBlob(trade);
  
    // Deserialize the pdx instance and trade (read-serialized="true")
    PdxInstance tradePdxInstance = (PdxInstance) BlobHelper.deserializeBlob(serializedValue);
    Trade deserializedTrade = (Trade) tradePdxInstance.getObject();
    System.out.println("Deserialized: " + deserializedTrade);
  
    // Compare trades
    System.out.println("Trades are equal: " + trade.equals(deserializedTrade));
  }
  

• How can I reset firefox via the command script (linux)

  I'm trying to set up a build server from Jenkins that uses SeleniumHQ and Firefox ESR during integration testing.

  I installed Firefox ESR 24 and seleniumHq 2.42.2

  I found that the State / the Firefox profile is getting damaged when selenium code stops.

  This prevents the FirefoxDriver selenium to establish a control connection because firefox is blocked on Firefox "the last time I fell - what do you do? Start over or try to recover?' screen.

  I want to do is make sure that I always start with a configuration of default Firefox of pure plant at the beginning of each race.

  for example, a configuration "Reset to factory defaults".

  This should be OK because the Jenkins account is used only for this build process.

  Unfortunately, there is no documentation on how / what to do jump far to achieve this.

  What should I do to achieve this? I see that there is a directory ~/.cache/mozilla, but appears not to be the magical place I'm looking for...

  The main profile folder is here:

  • Windows: C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/ < profile >.

  You will need to remove this folder where files get corrupted when you close Firefox.
  The other location is for the cache and other files as topic: newtab miniatures and phishing protection database.

• Why Firefox 5 will not see the Windows Media Player Plugin?

  Hello useful Mozilla expert,

  When I click on a link to play a standard WMV video in Firefox 5, in the movie player window it is said 'Click here to download the'.

  When I click on 'Click here to download the plugin' in Firefox 5, I get a panel of Firefox that says I need to Windows Media Player 11, but I already Windows Media Player 12 and the browser Firefox WMP plugin installed on this computer... it worked fine in Firefox 3.6.

  If I then click to install the Windows Media Player 11 plugin, it goes to another Firefox sign that says: ' no plug-ins have been installed, Windows Media Player 11 - no available '. Then, there is a "manual install" button, and when I click, it takes me to a third party plugin site called 'InteroperabilityBridges.com' which has a plugin Firefox WMP dated April 2007 available.

  Here is the link he gives... http://www.interoperabilitybridges.com/Windows-Media-Player-Firefox-plugin-download

  When I check my Panel "programs and features" in Windows 7 on my control panel, I can see that I have already installed something called, "Windows Media Player Firefox Plugin" installed and it is dated 10/24/2010 and it is version 1.0.0.8

  Despite having already the required plugin installed and showing in my control panel, programs and features, this WMP plugin does not appear on my plugins Firefox 5 Panel. So I tried to re - install with the installer of origin and available to the above URL Setup (they seem to be the same, except my installer of origin has a date of 2010).

  I also tried the 'fix' option in the setup of the plugin... it still does not appear in Firefox 5, nor this browser will play a WMV file in the integrated test related troubleshooting page plugin Mozilla WMP player, or other pages that embedded the WMV players.

  So the question is, why is Firefox 5 demanding I install a Windows Media Player plug-in older, version 1.0.0.8 of 2007 when I have already installed...? and why it won't work?

  I went through all the troubleshooting information in Mozilla and go to the page dedicated to this subject and nothing works...
  https://support.Mozilla.com/en-us/KB/using%20The%20Windows%20Media%20Player%20plugin%20with%20firefox

  http://KB.mozillazine.org/Windows_Media_Player#Missing_plugin

  http://blogs.technet.com/b/Port25/archive/2007/04/16/Windows-Media-Player-plug-in-for-Firefox.aspx

  What is the solution? The upgrade again for the 3rd time in the last 2 months, this is not an option... I'm tired of going through all the difficult steps of the upgrade and find what has changed and rejected another upgrade of the browser Mozilla and re - install plugins, extensions, modules and customizations and repair everything that does not work, as I always do now with Firefox 5.

  It seems that as soon as I get most things squared away in a new browser from Mozilla, then they came out with three new releases, so when I'm still struggling with the FF5 version (as I am now) there will be version 9 I get annoying constant 'reminders' upgrade to.

  Thank you

  Digi

  You carefully read and follow the instructions in the 2nd and 3rd paragraphs in the article on the creation of a folder \plugins folder installer of Firefox and copy the C:\PFiles\Plugins file in the newly created folder?

  • http://KB.mozillazine.org/Windows_Media_Player#Installing_the_new_plugin

  Worked for me.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox

• Samsung 850 EVO and Macbook Pro 2011

  I have read of many post related to this, but I think my problem is different.

  I tried to move from a HARD (really a hybrid of seagate SSHD) drive a Samsung EVO 850 500 GB into a MacBook Pro with OSX 10.11.2 (early 2011)

  I did the cloning with the ccc, the HDD (SATA) SSD (USB) without problem.

  Linking the SSD on SATA port all was extremely slow, to the point that I had a ball of spinning for any action and even write login/pass takes a few minutes. I did some fsck boot single-user system and checked the logs, but no error at all. Tried the two enable trimforce and people with reduced mobility.

  Repair partition takes forever to start, up to the time where I'm not ever leave at the end (after more than an hour).

  As the SSD works very well (to about 30 MB/sec) USB I have that this error was the infamous SATA cable, but I am reluctant to this topic, because:

  1. - the HARD drive works fine with the same cable (to about 100 MB/s)

  2 - make a bench in SSD (BlackMagic...) he gives 500 MB/s for both read & write, it seems speed is ok.

  3.-j' have linux small partition ultimately not yet set up to start SSD. With SSD in SATA bay, booting from a USB Ubuntu, I can perfectly copy data between applications SSD (linux partition) at a very brisk pace, it seems that the SSD or cable are defective.

  Do you have advice on where the problem may be.

  I'm out of ideas

  Thank you

  AA

  I have trying further.

  First of all, connect the SSD to a PC and the cloning of W7. Cloned and start Ok and fast, but the PC has little time and SATA2 ports only, so I was unable to test mode SATA3.

  Then, test the SSD connected to SATA port in macbook with Drive Genius. Integrity tests was Ok to read and write, with speeds of around 450 MB/s in both directions. However, copy a single file from the finder or terminal takes ages, both for the small (Kb) or support files (MB)...

  According to some messages here, similar problems were caused by a bad SSD or a cable failed. According to the tests, the disc is ok (I can get about 450 MB/s) and the cable is Ok (disc is allways found, slowly, but).

  Any advice?

• Failed to update KB980408, KB975496 & KB981078 on Win 7 32 bit.

  This is a new DELL Vostro 220 s with Windows 7 Professional computers.  What's weird it is Windows Update to install updates for Windows XP as well and do not have on them because they were the wrong version of Windows.  Here is a summary:

  1. 800736B 3 Return Code.
  2. Downloaded manually, fails and no error message.
  3. Uninstalled BitDefender and the firewall is disabled.
  4. Tried to clean boot

  Thanks for any help with information leading to repair this unit :)

  New DELL, integrity Test of memory has failed... RMA'ing... Case Closed, thank you!

• DeskJet 3845: Where'smy printer gone?

  My 3845 printer works OK but need the black cartridge has changed.   I put in a new, but with the printer does not respond so I replaced the cartridge with an another new cartridge.   All I get is the Green LED flashes (or turn it off completely).  The integrated test system does not either.   I checked all the cables, they are OK, but even HP Support Assistant now can't find the printer.  I even tried to reinstall it, but in vain.   No error messages have not shown at any time.   Where should I go from here?

  In a final stand this morning, I turned on my p/c and inserted a third and my last, new tape in my printer.   Blow me down, it turns!   I tried to replace the previous two tapes, but none of them work to return to #3.   However, at least I have a printer working again at the price of one-for-the-price-of-three cassettes.   Oh, well, that's life I guess.   But thanks for all your interest and tries to advise.   Very grateful.

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pre-seed evaluation error 2000-0332, Inspiron 7720

  I have a laptop Dell Inspiron 7720. A few days ago, I have a suggestion of a Dell program to update my BIOS, which I have allowed. Update didn't seem to bring up all additional windows or a progress bar to let me know how would the update, but I don't think too much of it and let the computer do its thing.

  In general I just leave my laptop on nonstop and put to sleep when not in use (I remember reading somewhere on the departure of the user of Windows 8 guide just let it sleep instead of turning it off). Yesterday, I went home for Thanksgiving so that my laptop was in mode 'sleep'. When I tried to turn on my laptop, I noticed that it was no longer in fashion 'sleep' and had put off instead. Not much, I thought, but when I turned it on, I got an error screen in the sense of

  PXE-# Media test failure, check cable of

  PXE-#: exit Intel PXE ROM

  I found myself at the start screen, which allowed me to run the diagnostics. I left running and came across 2000-0332 error code in the form of assessment of pre-boot, who told me that something was wrong with my memory of the video card (abnormality of the video memory integrity test). After a bit of research on this code, it may have something to do with my BIOS and I should try for the flash. However, I wasn't able to do it through USB (I get the error "invalid or damaged bootable partition" when I leave the USB key in start) nor the CD (does not seem to the .exe on the CD is detected).

  I tried to get to the BIOS screen by pressing F2 at Dell logo but I always end up on the same screen which lists me my legacy startup options (I don't get the screens of typical BIOS that allows me to change my default settings, boot order, etc.). The choices listed are removable disk, CD/DVD/CD-RW drive, second disk and network. By pressing F12 does the same thing. I noticed that the hard drive is not listed so I though that maybe something was wrong with my HD, but the evaluation shows that it works very well.

  I'm really in ideas on what to do. If worst comes to worst, I can try to exchange it for another since I'm still in the trading period, but I prefer to keep my laptop current and its information.

  Hi Andresmou,

  I'm sorry for the experience. As the error is related to the video memory, I suggest to install (flash) the latest BIOS and run diagnostic tests. You can download the latest version of the BIOS from the following link by drilling in the Service tag and click on the "Drivers & downloads" tab:
  http://Dell.to/117d6Zu

  Please let me know the results of the test.