black screen on my laptop\tablet of windows 8

Similar Questions

• Laptop black screens after the latest updates of windows... wil not booting in SafeMode (black screen).

  Windows Vista 64-bit... Black laptop after the latest updates... windows screens will not boot into SafeMode again black screens.

  Hello

  I would suggest trying the following methods and check if it helps.

  
  Method 1:

  Try the steps in the following Microsoft article and check if it helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem:

  http://support.Microsoft.com/kb/934540

  Method 2:
  You can refer to the link below and check the drive for errors:
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  If the methods mentioned above do not solve the problem, then it would be best to contact the manufacturer of the computer.

  For more information, see the following Microsoft article and check if that helps.

  
  Why my screen is black when I start Windows 7? (Applies to Windows vista)

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Pavilion dv6-6047 cl: black screen before opening of session in Windows 10

  Recently, I upgraded my laptop Pavilion dv6-6047 cl of Windows 7-64 bit for Windows 10-64 bit. The only thing I changed from the original specification (see link below), it is that I bought a Samsung SSD 850 EVO 500 GB. In Windows 7, everything was fine, the boot to make up to 8 sec. Now she starts, but stay for more than one minute, stuck in a black screen for the login screen to appear.
  I tried to update the graphics driver, but nothing happened.

  The processor driver is up-to-date.

  The SSD driver is too far.

  I rolled back to Windows 7 and everything went back to normal. And then upgraded to Windows 10 once again, everything goes black again.
  Please help me, because my SSD is worthless with a + 1 minute boot.

  Thanks in advance!

  Link to the original spec: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/mo...

  Link to the product page: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/mo...

  I solved it! I disabled ULPS as a result of this http://www.tomshardware.co.uk/faq/id-1904869/disable-ulps-amd-crossfire-setups.html . All is well now! This is the quick start again!

• Windows load with black screen and does not start after windows updates

  Original title: load windows normally screen will not continue

  I went to my computer tower and I chose to install updates when closing.  I went back later to re - turn on my computer and now it loads to the top of the black screen that gives you 5 options. safe mode, safe mode with networking safe mode command prompt, windows loads normally and finally to load windows from last known configuration that works.  Problem is that none of these options work.  they all return me to the same screen.  Help this laptop came preloaded with Win XP Media Center edition and I can't get back to work.  IM assuming I need a XP disk support center but I can't find them anywhere! HELP PLEASE SOMEONE!

  Hi Burton089,

  Your hypothesis is right. To resolve this problem, we need to repair your installation of Windows using the Windows XP disk. We recommend that you contact the manufacturer of the laptop to check if they have the Windows recovery disk.
  See perform a repair Installation
  

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Black screen occurs on laptop computer after Microsoft Office Professional Plus uninstall the trial has been interrupted.

  My Compaq Presario F500 uses the Microsoft Vista operating system.  I tried to install the trial version of Microsoft Office Professional Plus 2010.  The installation failed and began to 'undo changes' after that that we discovered the previous versions of the trial had been detected.  During the uninstall or process "cancel changes", I unplugged my laptop.  It was powered by the adapter, no battery.  Now, when I start my computer, it goes to Windows Recovery screen.  Once I selected "Boot mode safe" or any other option, including the BIOS screen, it goes straight to a black screen and stops.  My computer was purchased with Windows Vista preloaded.  Any ideas on what is causing the black screen does not?  My files on this computer has not been saved.  Independent repairers are load and arms and legs.  Y at - it an easy solution to this problem that I was able to help out so that my laptop will boot and go to my Windows screen and normal office?

  Hello

  Method 1:

  I suggest you do a start-up repair and check whether the problem is resolved. Follow the steps mentioned in the article below.

  a. start in the system recovery options. Follow the steps mentioned in the article below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  b. then do a repair on the system and check if you're able to boot the system normally.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 2:

  If this does not help then, I suggest do a system restore in recovery environment and check if you are able to start the system normally.

  I suggest you to return the items mentioned below.

  How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• black screen during the initial installation of windows 7

  Hello. I currently have Windows Vista Home basic preinstalled on my laptop

  I am trying to install windows 7 ultimate.
  I inserted the disc, rebooted and pressed F2 and choose to boot from the disk
  After that, I get just a black screen with an underscore flashing in the upper left corner, and it seems that its not really do something
  I ran the Upgrade Advisor and he said that I would be able to install windows 7
  I have SiS Mirage 3 graphics and sound to date
  Can you tell me what to do
  What is on the disk, it is possible that the disc is damaged?

  Hello

  What is the brand and model of the computer.

  I suggest you to consult the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/black-screen-with-cursor-during-install/68eb0062-9493-4A3F-8a01-3bfc85dc7b3c

• I have a black screen with cursor before logon for Windows 7, 32-bit. Help, please.

  Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.

  Hello

  Take a look at this thread and follow the same steps listed in the breast.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-boots-to-black-screen-with-cursor-before/531df029-0dac-4392-9efe-1d35714cf136

  In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.

  This link contains a lot of other really good as well troubleshooting procedures.

  I hope this helps.

• Computer won't turn on completely (black screen with blinking cursor) after installing windows updates

  8/7, the following updates have been installed correctly:

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Update definition for Windows Defender - KB915597 (definition 1.63.1021.0)

  Following this installation, the display resolution has been reset to be very low.  When you try to reset the resolution, I was alerted to a driver problem, so tried installing this in vain (below error code)

  Intel Corporation - display - Intel (r) G33/G31 Express Chipset Family

  Error details: Code 800703E3

  After that, he went to sleep the computer, but was unable to select 'sleep' (it is grayed out) but the stop keys option indicates that the updates were ready to install so I stop thinking which may help.  It was last night.  This morning, the computer was on, seen the screen DELL, then a black screen with flashing white cursor in the upper left corner.  I tried ctrl-alt-del, got the dell screen appears again, then black screen.  I tried ctrl-alt-del, thinking I could try one of the options key F at this time, but he won't even go to this point, the dell blank screen just screen.

  Any ideas would be very appreciated!  It is the second major problem that I had recently after updates vista install (the last time I temporarily lost access to all my files, because they were placed under a temporary user account that had been created!)

  Thank you!

  Hello

  You try to borrow the Vista DVD to any of your friends and do a repair (inplace upgrade) it might help you solve the problem.

  All the best,

  Geek

• re black screen: start: last good known Config, Windows starts normally begins to start and fails

  This screen offers safe mode options that I didn't choose. When I select to start Windows normally the computer starts to boot and I see the Windows Logo, then it switches to the Logo from my computer with 2 different keys of F and when I looked into it and I tried again, I got the black screen again with these options and it keeps cycling.

  I tried F8 and I don't know enough to navigate. Can I get help? My windows disc seems to be broken, so I'll try another disc. I ran it under Configuration now it says: for installation: format the Partition using the NTFS file system. I don't know how to repair Windows on mine.
  The disc seems to be higher my score 1 digit. It is Windows XP Home Edition. The Windows disk that is scratched is not this edition. I do not know what form of Windows is installed in my BONES.
  I move files off my hard drive when this problem occurred and I got a blue screen and the computer began to dump physical memory... I turned off my computer. Recently, I had the memory stick inside, but it starts normally after that I did until this happened, I thought that this can happen because I changed the memory stick... not sure

  Hello

  Are you trying to clean windows install? Do not pass without taking your databackup as format NTFS means it will erase all your data on the disk, you will have:

  Validate windows

  Reinstall windows update

  Install all required software

  Restore your data

  What, exactly, is the problem. Remove first the cd boot pc, at the prompt when it asks for safe mode - select Safe mode, connect to pc using administrator.

  Click Start-> run, type &-> chkdsk /f c :-> OK

  He may ask you to schedule the scan of the drive-> select Y for Yes, restart your computer.

  I hope this helps.

• Black screen on Acer laptop, XP.

  If I try to boot my laptop via the hard disk, I get the following black screen:

  TRAP 00000006 = EXCEPTION =.

  TR = cr0 0028 = 00000011 cr2 = 00000000 = 00000000 cr3

  GDT limit = 03FF base = 00017000 idt limit = 07ff base = 00017400

  CS: eip = 0008: ss F000F032: esp0010: 00061FE8 errcode = 0000

  Flags = 00010693 Cy NoZr IntEnUp TrapDis

  EAX = exb 000011F7 = 0040C0B1 ecx = 004013C edx 0 = 534D 0040 ds = 0010're = 0010

  EDI = 011C593C esi = 00051D 68 ebp = 00061FF0 cr0 = 00000011 fs = 0030 gs = 0000

  When I try to boot my laptop via the startup disk provided with the laptop, I get the following black screen:

  TRAP 0000000D = GENERAL PROTECTION FAULT =.

  TR = cr0 0028 = 00000011 cr2 = 00000000 = 00000000 cr3

  GDT limit = 03FF base = 00017000 idt limit = 07FF base = 00017400

  CS: eip = 0008: 0002124A ss: esp = 0010: 00061FBA errcode = 0028

  flags 00010646 NoCy IntEnUp TrapDis Zr

  EAX = D88E0060 ebx = 010F15A8 ecx = 00001618 edx = 535D 0040 ds = 0010're = 0010

  EDI = 0047164F esi = 00051D 68 ebp = 00061FF0 cr0 = 00000011 fs = 0030 gs = 0000

  This indicates the hardware failure. It could be the RAM, the hard drive or the mother/processor board. Let me start with the RAM.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If the laptop is still under warranty, contact Acer technical support.

  MS - MVP - Elephant Boy computers - don't panic!

• Receive a black screen saying that this copy of Windows is not genuine

  Original title: vista product key.

  I have a windows vista Home premium with the product key on my computer. When I start the machine, I get a black screen with the words this copy isn't genuine coming overlap my genuine copy. How to remove, delete or kill this copy of overlay. I don't know why this happened.
  Help, please... (this problem just started, the computer still works).

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Restarted my computor it goes to a black screen and wants to enter either windows vista or press f8 after you download updates from windows

  Original title: when I grew my dell desktop computer up inspiron 530 and windows vista home it goes to a screen that wants to get me things I don't know what I have to enter secure mode or windows vista

  I do not have ubdersand when my computor restars it goes to a black screen wants to enter or f8 for windows vista or press am I something wrong, after I check my restar updates too after that I think they are downloaded

  Hi ISSYHenico,

  1. you receive messages or error codes?

  This problem can occur if updates failed to install.

  2. are you able to boot into normal mode if you select Windows vista?

  Method 1:

  Step 1:

  Otherwise, try to start in safe mode and perform a system restore and check:

  Check out the link:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you can start in safe mode, then you can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Once you're able boot in normal mode, try the following steps:

  Method 2:

  Step 1:

  You can view the history of update for updates failed which is causing the problem.

  Check out the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Step 2:

  You can try to install the updates manually from the Microsoft Download Center download and check if it helps.

  Check out the link:

  http://www.Microsoft.com/downloads/en/default.aspx

  Hope this information is useful.

• Dell Optiplex 3020 - the black screen after dell logo (happened after windows updates froze at halfway and systems were restarted)

  We had windows updates run on all our systems of windows 7 in our medical center.  13 or so of our 3020 s Optiplex froze for eight hours about in a State of "install updates 1 of 24".  I have all them turned off and restarted units.  Once units have been restarted, they gave the Security windows startup or start-up option normally.  Those who had selected the option to 'start normally' would display the logo dell at startup, then click on a completely black screen (all devices still in market and monitors recording an active signal even if no picture).   Those started in safe mode w/o networking, loaded in safe mode.  I rebooted the machine in safe mode, and they all started out in windows without problem.

  For systems that go completely black after the dell logo.  I am able to F2 in the BIOS, I can run diagnostics from BIOS and I can't F12 in boot options, but I cannot F8 or SHIFT + F8 mode without failure or fact start in safe mode, please come under early start options.

  Anyone happen to know a way to launch a system of 3020 optiplex in safe mode without the use of F8, SHIFT + F8, go through msconfig or remote access to the registry (because I can not remote in the system on the network)?

  Maybe I can put the hard drive in a dock and change the registry in this way?  But can I change the potentiometer to force secure boot? or is it not possible to make a bcdedit to it as an external drive, install it in his camera and force it to safe boot the next time, he is running?

  Any ideas or suggestions would be very appreciated.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I get a black screen when I play videos in Windows Media Player and Windows Media Center.

  Until recently, all worked well for a long time. Now when you try to watch live TV or a DVD, I get a black screen with sound in Windows Media Center and trying to watch a DVD in Windows Media Player I also get a black screen with sound. The controls are there and functioning normally. DVDs are normally visible in the K-Lite Media Player Classic.

  I have Windows 7 Ultimate 64-bit, a tuner TV of SiliconDust HD Homerun networked and a videocard ATI Radeon 4550. I have all the latest updates.

  I found and tried many recommendations of the Internet for problems like this, and none helped.

  The video card driver is the latest provided by ATI to Microsoft for Windows Update and is dated from 19/04/2011. I tried to install the latest Catalyst software and driver from the ATI site, which does nothing to help, and then uninstalled. These drivers provide no option to adjust the hardware acceleration.

  I had an older version of K-Lite codec package installed. The problem does not change if I have the old version, the last 32 + 64 bit version or no version installed.

  In Control Panel, I tried to disable Windows 7 media, reset their reactivation components and reboot again. There is nothing.

  I had an older version of installed package from Cyberlink. The problem remains the same if I have the old version, the version the most recent or any installed.

  I tried to uninstall all Apple software: QuickTime, iTunes, etc. There is nothing to help.

  I tried to create a new user account; same problem there.

  I have VMware and a virtual machine that is running 64-bit Windows 7 Professional. In this machine, I can view DVD normally with Windows Media Player, using the same physical DVD drive. I don't have Media Center set up in this machine.

  Title photo: original No. in Media Center and Media Player

  The problem is now resolved. I removed the software installed probably because the problem started, and Cisco Webex, which I did not need, was probably the culprit, although I'm not 100% sure.

  Thanks to those who have tried to help.

• Black screen after the user logon in Windows 7

  Hello
  I use Windows 7 ultimate x 64 on my desktop. Recently, I just turned on my PC and when I tried to connect to my account after the Welcome screen, a black screen came up with the cursor and nothing else has been demonstrated. He just hung there.
  There is another account in which I can start but it freezes and does not respond. I can boot into safe mode but no icons, programs do not start which is pinned to the taskbar and I must run firefox.exe via the Task Manager... System Restore does nothing. I do not have the disc to install windows 7. All other patches? Please say.

  Also, the black screen goes after 40 minutes or more and I'm able to use my pc.

  Help, please.
  Thank you.

  Hello

  It looks like certainly there is some sort of virus on the computer. If this is the case, your files will not be deleted but they could have been hidden. So, please run a full scan the system for viruses.

  
  Method 1: Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.

   

  Method 2: Clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 of section of boot KB929135 to the computer in normal mode.

   

   

  I hope this information helps you!

  Thanks for trying to help me but I used Unhide.exe available on the website of Brian and my files are back.

  Thanks Brian. : D