Screen is frozen with a black screen with blue windows logo on it.

Similar Questions

• Black screen after the Windows Logo

  I have a black screen after windows with no crusor logo and no keyboard work, I just tried all mentioned in the forum, but all of them are just useless happens just after I shutdown or standby or standby extended

  I use windows 7 ultimate 32 bit with the latest drivers & updates

  Hello

  What is the code of Bug_Check of BSOD?

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  Check the code from Bug_Check to Faultwire as shown in the above troubleshooting link.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows startup at black screen after the Windows logo

  Original title: Evga Nvidia GeForce GT 520 1GB black screen graphics card

  I have a Hp Pavilion 6400 in the series which ran on Windows Vista (32 bit). I recently installed Windows 7 Ultimate (32 bit) and now the screen goes black once the windows logo closed its animation. I uninstalled the driver, re the driver installed and configured my system to the lowest resolution.

  Already found in the forums.
  -TV is too old to be compatible.
  EVGA - technician told me that the food was not powerful enough.
  -Forum Windows says: error in Explorer.exe.
  -Also found response that runs the computer through MSconfig would solve the problem.
  So far, none of these solutions have worked. Answers appreciated.

  Problem solved.

  It turns out, the driver for the video card would never completely install due to its mode of operation.
  Solution.
  1 restart Windows "low resolution".
  2. access to the form of previously downloaded files driver install the EVGA site while in safe mode.
  3. once divers have installed I changed the resolution in a HD rather than a framework
  "(native)" parameter in the resolution section.
  4. application of the Windows updates.
  5A started playing Star Trek Online.
  Thanks for your reply and have a great week.

• E200 frozen with blue screen

  Hi all

  I just changed some files to music through my computer (drive attached of course) and all of a sudden my window of records have disappeared. Then I looked at my player and the screen turned blurry (could just be the term 'written') and now the screen has turned blue. I can't get the player to turn on or off, and he's not even appear as being attached to my computer, even if it is stll plugged. I have no idea what to do and am not very technical minded. Can someone help me please?

  Hold the power for 30 seconds.

• Pavilion dm4 1041tx: black screen after the windows logo

  My laptop screen has frozen while watching a video then after restarting it displays black screen but I can connect to windows using the laptop and fingerprint reader can be closed by windows by pressing and then alt + f4, then alt + f4, then enter. Works in safe mode. Disable the ati graphics card did not work. Same execution of recovery did not work.
  Hard drive test results:
  Smart check: past
  DST short: PAST
  Long DST: PAST
  Help, please...

  Hi @vikash4309 ,

  At this point I agree with the tech that look at the computer I think it's a problem with the hard drive or even the system board. They may give falsely on the test results. I would recommend that you take it back to this HP's Service Center.

  If you do not replace the hard drive recovery CDs should work as long as replace you it with another hard drive and not an SSD because they are different and the recovery CD will know how to properly partition the drive.

• black screen after the windows logo when I install my video card

  Leadtek WinFast GT 220 1024Mo DDR2 graphics card

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  I compared the original image with my GT220 I bought, and me missing 1 capacitor... It's funny because it's probably the error of the factory. It only works with the drivers, if I install them it hundred boot windows7 (only win logo and black screen then)... And when I go to nvidia to scan my gpu it shows gt 330, HELP?

  You say you have "defective" material and you want a software solution?

  Any material support - including the drivers and other software that may be necessary to enable a hardware component to operate fully in a given operating system - is the manufacturer of the equipment.  So if you have a problem with your nVidia GT220 video card - your first stop should be nVidia.

  • Assuming you have Windows 7 64 bit, the drivers you want to include.
  • Assuming you have Windows 7 32 bit, the drivers you want to include.

  -In addition, you are in the hands of nVidia.

• Black screen after the Windows Logo screen

  All of a sudden just put off the computer. I keep trying to start it up, but just then it gets to a black screen and does nothing. I managed to get in Mode safe like twice, but when I try to access safe mode again, it gets stuck loading. What can I do to save my laptop OR at least save my data?

  Hello

  It will be interesting to know what model of laptop you have. I had the same problem and I connected the HARD drive to the second workbook as external HARD drive. on this way, I was able to copy all the important data.

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• window does not go past a blue screen that says windows can't connect me

  Hi I have an older version of windows xp and that you downloaded an older version of quickbooks 2007 program a disc when it said to restart the computer I hit reboot and now my computer will display loading windows and then stop to blue screen with the windows logo, I can move my mouse but nothing happens I (use this computer very rarely) that it is an old but I still need it from time to time. help please. Thanks Rose

  Hi Rose,

  · What is the error displayed in the blue screen?

  · Provide the full error message with the error code.

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

• Satellite L850 - 17 k - black screen with blue dots

  Satellite L850 - 17 k black screen with blue dots see photo
  It is THE video card, can't find it.

  See photos

  If you see the same on internal and external display LCD, I presume that the video card is faulty.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  I can't boot into windows xp. The windows logo comes on but then a black screen blank (you can see and move the cursor with the mouse however) is displayed.

  anesvet,
  I'm going to sound like I'm repeating myself tonight... (see previous 4 posts...)  but try this:

  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If this does not work, try to F * then try to go to Safe Mode.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• My Dell Vostro 1310 won't start. I turn it on and the black screen with the Dell logo appears and nothing more

  It was working fine and accidentally my phone fell on the keyboard and the computer froze. There was a part of the image of what was on the screen before that happened and blue and red lines/markings or whatever it is. I unplugged and took out the battery. When I turned on it again, the black screen with the Dell logo comes up and just stays there. What should I do?

  Hello

  If under warranty contact Dell

  http://support.Dell.com/

  or ask in the forums Support of Dell

  http://en.community.Dell.com/support-forums/default.aspx

  If it is under warranty, contact a reputable repairman, local computer