Black screen when I restart the Satellite M305D-S4830

Similar Questions

• Black screen when I turn the Satellite M

  When I turn on the laptop, I can not in the system screen, in black only, after that I tried several times, so I can't get into the windows system.

  What is the problem?
  Tanks, boyfriend

  Hello

  You are able to access the BIOS?
  If this is while there could be a motherboard problem

  Have you tried to connect the Satellite laptop for external monitor to check if something is not visible on the second screen?
  I think it would be useful to get more information about the possible hardware problem
  If a second screen would be too dark, then a problem of graphics card would be possible

  However, I doubt that you could fix yourself. Most of the time it s a job for a technician

• Black screen when I launch the Satellite A100-773

  Hello

  I don't know what is happening
  If I press the 'POWER' button at startup, I got BLACK SCREEN all the time,
  If the screen is defekt? or what else can we?
  the lobe of the HDD to burn?

  It verifies the DVD-ROM and the CAPS LOCK, and another lobe burn upward, as allways standart!
  but after that if I hit the ' CAPS LOCK ' button it don't burn.

  * edit1 *.
  If I press the key "FN" for more function, the lobe burn, but I can do it only for a few seconds, then there reakt custom more

  thx for the help...

  It is difficult to tell if it s a defective GPU or the internal laptop display.
  You can try to connect an external monitor to the laptop to check if something appears on the second monitor.

  If you see any picture or anything else so I guess that the graphics card is dead.
  This could be the case value because the GPU is fixed on the Board and that's why the whole motherboard replacement would be necessary.

  Seems you have to reach a point of service authorized in your country for the control of the laptop and the diagnosis of the error.

  If the warranty is valid everything should be done for free!

• Where to find Win XP 64 bit for the Satellite M305D-S4830 energy management/conservation

  I was able to completely load Windows XP 64-bit on my Satellite M305D-S4830 with all the drivers.
  Everything is great except my battery only lasts is not too long to work.

  I've searched but have not been able to find a working copy of Toshiba Power Saver that works on my laptop with XP 64.

  Any ideas or suggestions?

  Hello!

  I think that you will not find a 64-bit version of Toshiba Power Saver.
  Toshiba is not compatible XP 64 bits are therefore no available 64-bit software.

  You must use the Windows settings or change you to Vista 64-bit. Vista has more options for saving energy and it s the same as energy saving.

  Good bye

• Black screen on startup of the satellite Pro M30

  Hello

  Sometimes, I have the problem that my laptop starts up with a black screen. What will happen is that the Red Toshiba logo comes up first, but before you get the loading Windows screen screen will turn black and will cease any activity hard drive and cdrom. The laptop will then just stay there until I have manually turn it works again.

  I was not yet able to determine exactly in what circumstances sometimes, when starting, sometimes when you restart it.

  After that I restart the Windows laptop then tell me he could not start properly and ask me for the etc SafeMode. That's why I first concluded that it could be a Windows problem, but after using the recovery dvd twice I think I can exclude.

  One of my colleagues noticed something on what may be a problem with the video card do not load or commissioning, which doesn't seem likely?

  Any ideas?

  Hi robc,.

  very good and detailed describtion!

  In my opinion the graphics card work properly because otherwise the Toshiba logo have not been shown.

  So I think that failure is perhaps a bad connection of the IDE cable, but to know definitely you should bring a short verification to a Toshiba Service partner!

  I think that your M30 Satellite Pro is still under warranty

  Antoni Bye

• Black screen on startup of the Satellite NB10-A-10V

  Hello

  I just bought a new computer toshiba laptop satellite NB10-A-10V but I hate windows 8.1 and I tried to install ubuntu 14.04.

  Now when I start my laptop replaced black screen toshiba logo and any key worked (F12, delete, escape)
  So, how can I manage this problem? Why, toshiba does not or blocked an OS other than windows 8.1?
  I called support and they told me that it is 70 euros for it. It's almost a flight!

  So I think it's a good laptop and I just want to use it with ubuntu, I don't see where is the problem.

  Otherwise I'll fix it in a store of this kind of question, and I will never buy another toshiba in my future.

  So, if you can find a solution (for free, 300 euros already for the laptop 4 days ago only.) it will be very cool

  Thank you

  Hello

  Usually after the purchase of a new product, new owner should read paper textbooks s user initially. It is described that original preinstalled recovery image (original version of Windows) is saved on the HARD drive, and each new owner, before you start to do some experiments or install anything else should create recovery media. It can be DVD or USB, depending on the model of the machine.
  You created the recovery media?

  Very important, is that Toshiba does not support Linux, but in general, you can do with your machine all you want. No you don't have to use the version preinstalled Windows. Many people use Win7 or Linux on various models of Toshiba. Due to this Toshiba has created the separate category of Linux on this forum where you can exchange information and experience with other users of the forum.

  I must also say that you are mistaken if you think that Toshiba is blocking something. That s certainly wrong. When you stop preinstalled Win8 completely, you will be able to enter the BIOS settings and change the MODE to BOOT. After doing this, you can install anything you want.

  More info on what you can read on http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

  For more questions on Linux on Toshiba laptops I recommend you to visit category Linux SOFTWARE and OPERATING SYSTEM.

  Good luck

• M40X-141: black screen when you use the WiFi network

  Since I bought my M40X 141 in July 2005, I got black screen frequently when you use the wifi.

  You know this black screen with typical noise from the hard drive.

  I did all the updates without effect. The local seller understood nothing black screen, associated with the use of wifi.

  In the XP world, nobody seems to find this kind of abnormal things so I'm desperate to find a solution to stop the frequent black screens. Recently try a usb dlink wifi dongle (dwl-G122) the constant flow of black screens disappeared
  (An Xp session 10 days was previously impossible).

  Now, I know this is a bug in the original software and I try desespartely to find a patch or updated driver or professional advice.

  Is there someone here who can help a tired multi restart man to use his laptop with the original material?

  Your laptop should still be guaranteed if you bought in June 2005. Take it to your authorized Service Provider nearest and have their say. They should already provide for a procedure for this and know what to do. Sure the frequency that uses WIFI and display inverter coincides, and you get the black screen. Change them should fix this problem.

• black screen, when you open the virtual machine console

  Hi guys need help in answering the following questions:
  When you open the console of the virtual machine, the connection process is fine, but it stops at a black screen

  

  That's what I use:
  (1) Windows 7 x 32
  VMRC 2) 5.1.0.20447
  (3) Mozilla Firefox 18.0.1
  (4) VMware vSphere Client 5.1
  (5) Vcloud 5.1.0.810718

  Here is my log:

  13/01/29 10:15:42.100 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:42.101 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, VMRC_EVENT_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:42.101 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:42.103 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:42.821 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:42.832 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{135627FE-3BDE-45F6-8234-053307C0876C]}
  29-01-2013 10:15:42.833 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:42.845 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:379] 10:15:43.901: control of the VM has not been created
  29-01-2013 10:15:43.902 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:15:43.909 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.909: control of the VM has not been created
  29-01-2013 10:15:43.923 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.923: control of the VM has not been created
  29-01-2013 10:15:43.925 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:15:43.925: control of the VM has not been created
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:44.275 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, VMRC_EVENT_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance"vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD}"ID - 2 modes - message mode has 2-3
  29-01-2013 10:15:44.275 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:44.276 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:44.957 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:44.958 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{9340F800-963A-46AF-9EBB-CCCFF83FC2CD]}
  29-01-2013 10:15:44.959 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:44.970 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:15:46.770 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:15:46.770 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3
  {{2013-01-29 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:191]: start: VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, VMRC_EVENT_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}, 5.1\Firefox\vmware-vmrc.exe C:\Program Files VMware Remote Console Plug-ins, "C:\Program Files\Common VMware Remote Console Plug-in 5.1\Firefox\vmware-vmrc.exe - parent-PID 6316 - instance ID 'vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996}' - mode 4 - message mode has 2-3
  29-01-2013 10:15:46.771 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:205]: process of creating VMRC
  29-01-2013 10:15:46.772 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:220]: loop from MsgWait
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/ScriptableObject.cc:321]: ID of property not found: onMessage
  29-01-2013 10:15:47.339 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/common/VmrcPlugin.cc:2548]: onMessage Manager call failed
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:229]: A WAIT_OBJECT_0
  29-01-2013 10:15:47.379 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:256]: expect successful moniker
  {2013-01-29 10:15:47.380 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:149]: link to [VMRC_MONIKER_vmrc-np-t-{381FF1D3-DBD1-4B19-A516-5CA7DEE58996]}
  29-01-2013 10:15:47.381 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:154]: BindToObject managed
  29-01-2013 10:15:47.388 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:217]: successful startup
  29-01-2013 10:17:20.197 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.788 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:13.792 [d:/build/ob/bora-781747/bora/apps/vmplayer/win32/plugin/procControl.cpp:633]: no associated window with control of the virtual machine
  29-01-2013 10:59:15.303 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.308 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 10:59:15.324 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.324: control of the VM has not been created
  29-01-2013 10:59:15.326 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:15.326: control of the VM has not been created
  29-01-2013 10:59:33.283 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:246]: called stop
  29-01-2013 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:251] 10:59:33.284: control of the VM has not been created
  29-01-2013 10:59:33.540 [d:/build/ob/bora-781747/bora/apps/vmplayer/npplugin/win32/VmrcDelegateImpl.cc:174]: startup called
  29-01-2013 10:59:33.540 [d:\build\ob\bora-781747\bora\apps\vmplayer\npplugin\win32\.. /.. /plugin-common/utils.h:145]: advanced configuration analyzed characteristics: 3

  Windows 7 x 32

  That's kinda our old friend is back.

  Two checklists

  1. check the version of the VM VGA driver, if that's the case, you must update the WDDM driver display driver.

  2. make sure that you use HW 7 and more.

  More info here

• Black screen when I leave the computer for a while and then return

  Please help me stop my pc to view a black screen whenever I walk for a while. If I go to

  make me a cup of coffee, I go back to a black screen, and it is very annoying. How can I stop this
  happening and still see no matter what, I was working on?
   
  Moved from feedback
  Original title: black

  Hello

  The monitor goes into sleep or power off or the computer goes into sleep or screen saver (black screen) makes its appearance on after only a short period of inactivity.

  Check your Power Options:
  Extend the life of the battery: battery power on laptops, laptops and netbooks:
  http://www.Microsoft.com/atwork/maintenance/battery.aspx#fBid=8eBaOgb7POr

  Change the options for the screen saver in a right-click on the desktop > properties or personalize (Vista and Windows 7) > screen saver (Windows XP)

  Hope this helps,

  Don

• Black screen when you access the server console

  We are currently experiencing the following intermittent problem...

  When accessing a server through the console vcenter he'll suddenly lock (the console not the server).

  At this stage the existing Remote Desktop connections continue to work, but no new connections can be established.

  This leaves us in the position where the server is running, but we no longer have in any case of it management. In the past, the only way to retrieve the control was to restart the server that resolves the problem. However this is currently perform our mail server/domain controller so I hesitate to do a hard reset and will have to at least wait until that out of office hours to do. Which means I can't do the management and maintenance tasks I have to do today.

  We currently have 2 x hosts running ESX 4.0.0 164009.

  To manage using vSphere 4

  The service that all servers seem to be Windows Server 2008 R2 or Windows Small Business Server 2008

  is there one or more particular services can I restart to solve this problem?

  The vSphere update, I suggest this as follows:

  • first update the server vCenter Server (you need to download the new setup file, run the installation, say I have a database, use the existing ODBC name, and it will perform the update to U1)

  • then install the new AUVS (there is the U1P1 version)

  • then use AUVS to install ESX update (if you have a license of VMotion, it will work automatically, otherwise you will have to manually release each host to put in maintenance mode).

  André

• Blue screen when you restart the computer "problem event name: BlueScreen, BCCode: 116"

  my computer still restarts and gives me this message and I don't know what the problem

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 116
  BCP1: 84E25510
  BCP2: 8E8389B0
  BCP3: 00000000
  BCP4: 0000000C
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\080914-17300-01.dmp
  C:\Users\ahmed\AppData\Local\Temp\WER-28220-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Service pack 1 update.

  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

• Re: Satellite M305D-S4830 Volume dial strange behavior

  Hello, I have a strange problem with my volume on the Satellite M305D-S4830 control button. I don't know if this error began to occur, but now my volume control button produces the letters B and C when I ride it's right/left. Here, I'll roll c/cw-cw now:

  ccccccccccccbccccccccccccccccccccbbccccc

  It produces the BS less often than c as you can see. In addition, he performs the adjustment bar volume but erratic: when I roll it clockwise it decreases the volume and then greatly increases the volume immediately. Turning clockwise increases the volume strongly, and sometimes it decreases the volume a bit.

  I have the latest drivers for my Satellite and have not modified the operating system or the Services (such as HID Input service) somehow. I tried to use a previous version of the driver for the sound, but nothing changed. Thanks for your time.

  Hello

  Someone had a similar problem. I read about it here in one of the wires (if you want to use the search option).
  The point is that the technician cleaned wheel volume (contacts, etc...) and this has solved this problem.
  I put t know if it's the same reason in your case but it s worth a try

  Notes; Don t disassemble the laptop computer or similar! This can be done ONLY by ASP because of some validity of damage and guarantee of the equipment!

  PS: of course the update of the BIOS is also advised.

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.

• Satellite U405 black screen when I surfed on the internet

  Madam, Sir, I am a student in the third year and my laptop has a problem, I need help. This will be the black screen when I surfed on the internet for over 3 hours. Why?

  I guess my laptop battery is the key to the problem and a few friends recommend a battery for me web.
  What do you think about this?

  Your ad is a little strange to me.
  How you can surf internet if the screen is black? I mean, it's not logical for me.
  What Toshiba laptop model do you have?

• Start-up problems: I have a black screen when I log in the menu

  When I start my computer, I get a black screen when I log in the menu. I can still access the computer on safe mode, but I can't find a solution. Antivirus Avira found no detection, so I don't think that's associated virus.

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Scan with Malwarebytes in SafeMode with networking to ensure:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform quick scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's Vista Security Forum.

  If the above does not she, repost in the Vista repair and recovery Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  See you soon.

  Mick Murphy - Microsoft partner