Black vertical streaks when copying in black

Similar Questions

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• lazorjetpro: black vertical line when copying but does not print

  When copying or scanning/printing of a document, we get a thin black line in the middle of the page, but not if we print from the computer directly to the printer.

  Please read this post then provide some details.  What printer model? If the line appears only when copying or scanning from the ADF Document (CAD) the line is almost always caused by a specification (or two) on the thin strip of glass to the left of the main scanner glass.  See here for more information on how to clean this area.  It may help to use a strong flashlight held almost flat against the glass to see the spot.

  

• vertical lines when copying or scanning with my c6180 printer

  6180 all in a print is fine, just copy & fax causes the vertical black line on the side only. site filled with HP troubleshoot process - no change. Can anyone help. printer is about 2 years

  I don't know if this will help anyone, but I had a problem with a black line when fax is received or when copying through my document feeder.  The quality was very good for printing and copying via the flat glass.

  Here's what I did for a solution... copy of the elevator panel to expose the big glass, then carefully lift on the small gray bonbout charger doc Center, this will take a little effort but don't break anything.

  Once up on hinge, put your fingers on the two gray side tabs to lift the next part with the rollers.  This will now expose a small ~ 2 x 9 "piece of glass that has probably debris like mine did.  Clean with windex and closing...

  I hope this helps.  Don't throw it!

  David

• OfficeJet 6500 has printed a full page of black streaks when copying

  My HP Officejet 6500 a prints a black page ridged when the copy of the glass or ADF. I cleaned the glass and ADF and got the same result. I can print the docs okay, it's just when I try to copy when I have the problem.

  That's the bad news, I didn't want to hear. The warranty expired 3 months ago.  (

• When copying, Office Jet Pro 8600 unique Cyan vertical line

  My Office Jet Pro 8600 all-in-One has a single vertical line cyan, middle of page when copying, either directly or from memory.

  There is * no. * line when I "to clean the print head on the test page", but then the line returns when I copy.

  Help, please! Thank you.

  I understand that you get a vertical line when copying.  I'm you a link to a troubleshooting assistance document.  I would pay particular attention to the glass of the scanner in the third cleaning Solution.   Let me know how it goes.

  OfficeJet Pro 8600

• OfficeJet Pro 8610: lines when copying

  I tried the solutions to vertical lines when copying or scanning, but none has solved the problem.

  Please help, it lasts for a long time and I'm ready to move from the printers. Thank you

  I have it! I was focusing on the large flat glass and originally made a quick cleaning of the small scanner glass, not realizing that it was the smallest glass surface that the scanning mechanism is until what I watched a YouTube of cleaning description. I thank very you much for your time.

• OfficeJet 6500 black vertical streaks

  Hello

  I just bought this printer and I keep getting a small, not always to the same place, black vertical streaks on the printed page. It seems to happen when I use the two-sided printing unit. It will print the streak on the front page - not in the back.

  Help would be greatly appreciated (I already tried cleaning cartridges).

  Thank you.

  Denis

  Hello

  It seems that part inside of the unit of the duplex unit took little ink and now is burrs on pages that pass through the duplexer. The best idea is probably to get this duplexer to a service of HP, so it gets cleaned up.

  Before that, you can try print a print job duplex of 30 to 40 empty pages and see if this clears the ink.

• HP Officejet Pro 8600 Plus: vertical line when scanning

  I get a vertical line when I scan using the document feeder.  I do not understand when scanning the glass plate. I need assistance to access the mirror slider.  I raised the lid for the loading of documents, but I couldn't find out how to get under the rollers to clean the mirror. Thank you

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

  Figure: Clean the ADF scanner glass Strip

• cannot scroll when copying

  I can't scroll when copying of text on a web page. When my selection reaches the bottom of the page with my mouse it just will not go further. This problem does not occur in any other application, or IE 8.

  I have not had this problem myself, because I have the bar of the Add - it open all the time. I saw this question be posted here by other users of recalledl a few times. Guess I remembered that cause a little bass-ackwards.

  Sounds like it may be this Bug, which is linked to a full screen or maximized window.
  
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=644621
  
  Has been fixed, bur, it has been corrected for Firefox 8.0 and I cannot understand if it's supposed to be in Firefox 9.0 or not.
  
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=675865
  
  Shows like "Assigned" and not "resolved".

• Re: Satellite Pro U400-160 - freezes when copying larger files or videos

  Hello:

  I have a Satellite Pro U400-160 and a VERBATIM external hard drive USB eSATA combo.

  If I turn on AHCI mode recognizes the drive, but when copying the video files or large file size, the system is frozen. However if I remove the mode AHCI works correctly. I have the version 9.8.9.1023 Intel (r) Matrix Storage Manager and my laptop BIOS v4.0 and Windows Vista Business.

  Thanks in advance.

  Hello

  Normally the AHCI mode has nothing to do with an external HARD drive. It is only important for the internal HARD disk if you install Windows.

  Anyway, you have installed all the updates of Windows for Vista?
  In addition, you should test another external HARD disk or with another cable.

  Welcome them

• iMac (late 2009) 27-inch vertical streak on the right side

  iMac (late 2009) 27-inch vertical streak on the right side. Oddly enough it is still there even on the gray splash screen. How much is it? I tried restarts it, Vpram etc, but still there. Always in the same place. Is a graphics card out or the display itself. Should I make an appointment with an Apple Retail Store?

  Strange, strange! This mysterious line disappeared miraculously se today!

  I am delighted, but at a loss for why it appeared and why he disappeared.

  The only idea I have is THAT HEAT could have something to do with it.

  I look forward to any comments on this mystery.

• OfficeJet Pro 8630: hp 8630 printing Off Center when copying

  Printer prints well out of the computer, but prints off the coast on one side, when copying without worrying if the paper is flat or powered by the ADF.  Can't see obstructions.  Yet once, print very well when printing emails, downloads etc.  Only off-center by trying to use it as a copier.

  Hello

  If it is a copy, it is the printer and not from any software.

  Have you tried to do a 'Restore Factory defaults?"

  I wonder if that would help, except perhaps appeal for support.

  Thank you.

• Plant system Windows Explorer when copying or moving files: error explore 0xc000012d

  Windows Explorer crashes XP Home (laptop) system when copying or moving files that gives the error message: explore 0xc000012d.  Text and images suddenly begins to disappear from the screen (go faster if you move the mouse on the screen!), system crashes, gives the blue screen and stops. No time to save data, which is happening so fast.  I lose all data in open programs.  RAM is tested without error, ATI Mobility Radeon X 1300 driver has been updated, system fully updated, but nothing is. Could not find any information on the MS Support or on the web that would help.  Please help - tired system crash all the time!

  Pippuri,

  Try to disable the fast user switching and see if that helps.

  Go to control panel, double-click user accounts, and then change the way users log on and outside. Should be a checkbox to turn on fast user switching.

  Let us know if it works. Thank you.