vertical lines when copying or scanning with my c6180 printer

Similar Questions

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• lazorjetpro: black vertical line when copying but does not print

  When copying or scanning/printing of a document, we get a thin black line in the middle of the page, but not if we print from the computer directly to the printer.

  Please read this post then provide some details.  What printer model? If the line appears only when copying or scanning from the ADF Document (CAD) the line is almost always caused by a specification (or two) on the thin strip of glass to the left of the main scanner glass.  See here for more information on how to clean this area.  It may help to use a strong flashlight held almost flat against the glass to see the spot.

  

• HP Officejet Pro 8600: Document feeder causing vertical lines in copying and scanning

  When I copy or scan via the document feeder I get two vertical lines on the copy or scan.  How can I fix it?

  Hello @aadmin, hope you are well!

  Thank you for becoming a member of the HP Forum. It's a great place to get help from the community, to get suggestions and find what has worked for others.

  I understand that you are facing problems while scanning / copying using the ADF. Please, try the following steps to resolve this problem.

  1. Make a blank copy using the ADF. Ideally, you should get a blank document with the two vertical lines.
  2. Keep the page out on your dish / the main scanner bed facing you.
  3. Follow the line or streak on the paper to the box on the ADF glass is the origin of the problem. Carefully clean the thin "strip of lid of scanner ADF white' and 'the band glass ADF Scanner' with a damp lint cloth.
  4. See the figure below. 3 is the glass Strip ADF & 2 is the white cover ADF scanner.

  

  These measures should be the case, I would like to know the results.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Officejet Pro 8600 - black lines when copying, colored scanning lines

  Hello

  I have a HP Officejet Pro 8600. When I try to copy from glass, copy of ADF, I get black lines going the length of the pages. Whenver I scan, once more, the glass or ADF I get lines colored, ranging from the length of the analysis. I called HP customer service and the representative told me clean the glass and part inside of the ADF, but the problem still remains. No idea if this is a common problem? More important still, how fix it.

  Do a hard rest on the printer. Let the printer and unplug the power cord. In doing so, it will remove the lines.

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

  Valerie, printer Agent

• OfficeJet Pro 8610: lines when copying

  I tried the solutions to vertical lines when copying or scanning, but none has solved the problem.

  Please help, it lasts for a long time and I'm ready to move from the printers. Thank you

  I have it! I was focusing on the large flat glass and originally made a quick cleaning of the small scanner glass, not realizing that it was the smallest glass surface that the scanning mechanism is until what I watched a YouTube of cleaning description. I thank very you much for your time.

• HP Officejet Pro 8600 Plus: vertical line when scanning

  I get a vertical line when I scan using the document feeder.  I do not understand when scanning the glass plate. I need assistance to access the mirror slider.  I raised the lid for the loading of documents, but I couldn't find out how to get under the rollers to clean the mirror. Thank you

  The document here can help solve the black lines to scan using the ADF on your HP Officejet Pro 8600 Plus.  From my experience this is almost always caused by a specification on the thin glass on the side left which is used for scanning using the ADF.  Cleaning of this area as described in the above document should solve the problem.  If the initial cleanup does not resolve the problem, it can help to shine a bright flashlight almost parallel to the glass.  For a line on the left side of the printed page, the place will be toward the front of the printer, if the line is on the right side of the document, it must correspond to a specification to the rear of the printer.

  Figure: Clean the ADF scanner glass Strip

• HP Officejet Pro 8600 Premium: Printer leaves black lines during copy and scan from ADF

  I know this question has been asked several times, but whenever I try to copy or scan from the automatic document feeder, it leaves black lines on the copy (with the document on the works of glass like a charm).  I've read through the forums and have tried the advice to unplug the machine and so on, but none of these suggestions work.  Any help would be appreciated.

  Hey @Huskers1,

  Welcome to the HP's Support Forum!

  I see that you have some problems with a line when copying from the document on your Officejet 8600 Premium feeder e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Get a little water and a lint cloth.
  2. Open the left upper part of the printer, where the document since the charger goes into the printer. It should open up as you opened a book.
  3. With your damp cloth wipe the rubber stamp, the rollers in the cover and the casters on the bottom of this section.
  4. Again open the left side of the printer, as you opened a book.
  5. With your damp cloth, wipe the rollers, you will find inside this section.
  6. Close the upper sections of the printer and open the flat section.
  7. With your damp cloth wipe the rollers and the white bar you see on top of the printer
  8. Clean the glass on the left side of the printer.

  Once all the pieces you cleaned dry, please let me know the results. If you remove the line, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• OfficeJet 6600/problem with the vertical line that appears both scanned and copied items

  There is a vertical line that follows the entire length of a page when I scan or copy.  Have cleaned the glass, it is not the effect.  Help

  Hi gljatlaw,

  I see that you are having problems of quality of scan.  I'll take a look at the document below.

  Scan quality

  Let me know how it goes.

• OfficeJet 8600 Doc bac - line down the right margin when copy or scan

  I have officejet pro 8600 premium.

  When I print or scan from the document feeder, there is a line down the right side of the document printed or digitized, about an inch from the edge of the page.

  The line does not appear when I use the flat bed.

  He won't let a line from the original - just on the copy or scan when using the document feeder.

  It happens when I scan my computer or copy to the screen of the printer when using the document feeder.

  I just noticed the problem today.   It was working fine yesterday

  Thank you

  This means that there is a place (dirt or tinted), on the ADF scanner glass. Try to clean the glass of the scanner ADF with fluffy. The ADF scanner glass is on the left side, under the ADF.

• Red vertical line on copy scan/auto auto

  I have an all-in-one PhotoSmart 7510.  I have had this unit for several years, but only recently, and only in autoscan or auto-copie mode, make a red vertical line down the scanning or copying.  This problem does not exist when I place the original document directly on the scanning bed.  I have not found a solution online that addressed this issue.  Just for fun, I tried the solutions in this document, http://support.hp.com/us-en/document/c01791053.  However, none of these solutions worked.

  Hi ericellman,

  When you leave the cover and look at the glass to scan there is a large glass panel that is the dish. On the left, you will see a strip of glass that is separate from the larger piece, which is the glass of the scanner for the automatic document feeder.

  I would like to know how it goes!

• DeskJet 3835: Black vertical lines when scanning - Deskjet 3835

  Hello

  Whenever I scan using the document feeder, there are black vertical lines showing on the picture. This happens with the dish however. The printer is the 3835 Deskjet all in one set. Receive your answer. Thank you.

  The lines that you describe would generally caused by a small file specifications (or some spec) on the thin glass to the left of the bed main scanner.  Open the scanner cover and clean the thin glass.  It can help to shine a bright light which is held at a slight angle to the bed of the front.  This would be to highlight the areas to be cleaned.

• black vertical line when using the charger on my HP 6500 E709n

  When you use the loader on my HP 6500 E709n, I get vertical black line in the middle of the page.  It appears on outgoing faxes just like any time I copy or scan.  He can't if I lay the originals directly on the glass, only when you use the charger. I am new to this forum (or any forum also), but I looked at the messages about similar problems with other models, but have not found a solution.  Can someone help me or point me in the right direction to find an answer?... Thank you!!

  See post from 20/09/11... It must be gently the magazine cover to reveal that the slot of the animal auto scan and clean only...