BlackBerry Smartphones Blackberry wipe to factory default

Similar Questions

• Profile of ring return of Smartphones blackBerry back to factory defaults

  Does anyone know how to reset profiles ringtone to factory default on the BB 8330?

  THX,

  CFD

  Welcome to the forums

  For this need you the Desktop Manager (DTM).

  1. connect your phone to the PC and open DTM

  2. click on backup and restore > advanced

  3. scroll the list to the right of "profiles".

  4. highlight "Profiles" and click on "Cancel".

  Who should deliver notifications.

  Before doing all this, I would say the phone to be on the good side of backup: http://www.blackberry.com/btsc/KB12487

  See you soon,.

• BlackBerry Q5 Q5 - factory default

  Hello, friends!

  Q5, SQR100-2, BBOS 10.2.1.2273, has no guarantee.

  I have the following problems:

  1. the bettery cannot be charged more 60% while the Q5 is turned on. If I disable it, it can be charged to 100%.

  2. the light constantly flashes red when the Q5 is turned on. BBVE fails only the test LED.

  I've updated BBOS, bought a new original adapter, flashed at BBOS 10.1.0 original box and flashed again 10.2.1.

  I have also written to @BlackBerryHelp, but they couldn't help me.

  I found at least 3 people on the forums with the same problems. This is a factory default and should expect to Exchange Q5, as well as all other persons.

  I wish that BB representatives contact and address this issue.

  Best regards

  abzzolut

  You will not be contacted by anyone can help you BlackBerry on this forum it is peer-to-peer.

  When you say that you have no guarantee can you explain why not?

  If you have recently purchased and the unit does not work, you should be able to go back to the seller.

• Classic BlackBerry is my BlackBerry Q20 a factory default?

  When I bought the camera and its opening
  I noticed that the Trackpad is turned slightly to the left
  As pictured
  Is this normal?
  & and it is my right to ask a new device, if it was aquise fault?
  The image
  https://PBS.twimg.com/profile_images/553648589457457152/4zwcmYKx.JPEG

  And the second thing is that the device has WiFi connectivity problems
  You see, my room is not that far from the modem
  But keep the device disconnect from all obstacles
  So that my previous Z10 Q10 & never ever made
  In short, the WiFi on Q20 is so weak comapring to the Q10 & Z10

  It's really a shame that I liked the device
  and this is my fifth BlackBerry in 6-7 years

  abdullahzh wrote:
  So it is these malfunctions (I mentioned it in the topic)
  The authorized distributor is obliged to give me an Exchange.
  BTW it telecom axiom in Saudi Arabia

  Yes, they should

• Phone blackBerry Smartphones can access. Need to reset to factory default.

  My 8330's "m" key no longer works, and I need to enter my password, so I can't access my phone. I have everything backed up via the desktop software, and now I want to do a reset of the phone, and then restore the settings so that I can make outgoing calls and access my phone book and e-mail.

  Is there a way to make a phone hard reset (i.e. to factory default) so that I can access my phone again? Any help appreciated. I'm willing to try anything, because my phone is essentially useless for anything other than incoming calls at this stage.

  Hi and welcome to the Forums!

  As full a long time that you have made a backup of your data, you can use this procedure to reset your BB to the default settings (at least for the currently installed operating system, that is).

  • http://supportforums.BlackBerry.com/Rim/Board/message?message.UID=269661#U269661

  Good luck and let us know!

• Z10 blackBerry how to reset to factory default settings.

  I have a phone Blackberry Z 10. I need to re set it to factory default settings locks of questions that the phone has now. He started with, a few weeks ago, not allowing me to click on Face Book messages, he would say instead. "this message could not be loaded." My whole face book messages say that if I try to open them now. Then it started not to allow me to send a text messages on. Sometimes he tells me that the message was interepted and I need to restart phone to send the message, it takes sometimes minutes to type in charectors or will only one type in a little at a time in random order. And sometimes the text screen is empty and will not load so I can type any message at all. And yesterday, the size of the screen where it is size and I have to re size it transforms to display icons, (text when it works) or read my mail. SO, there's a lot of things happens with my Z-10 in the last two weeks.

  I tried to restart it by l ' turn off, remove sim card and the battery and wait five minutes. Nothing seems to work so far. Is the toast of phone, or can it be reset?

  Suzie.

  http://support.BlackBerry.com/kb/articleDetail?articleNumber=000033591&language=English

• Reset the factory default ssd is a sure way to wipe ssd

  Using Windows7 64 bit, I have an option when reformatting a SSD (Kingston 64 GB V series with trim support) reset to factory default. Is that what will happen a secure erase so that I can sell the car without the risk of someone access to my personal information such as banking details online?

  Thank you

  Alan

  Hey AlanTaylor_854,

  To answer your question Yes Alan, when you wipe a SSD or 'format' you erase all the information out of him, so that your personal information will no longer be on this disk.

  I hope that this was the answer you are looking for.
  Thanks for posting of Microsoft Answers!

• I did the security two-step for iPad.  Apple support is a restoration that took it back to factory default.  Now I have nothing in iCloud I can find, photos, notes etc.what can I do to get back them.  They are still on my iPhone 5 s

  I have an Air of iPad and iPhone 5 s.  I did the two-step verification and wrote the secret code 4 digit.  I couldn't get into my iPad.  Talked to about 4 Apple technicians.  They guided me to restore my iPad to factory default.  My photos and notes and videos have disappeared.  They are still on my phone.  I never went to iCloud to see hat is here.  My iPad has said there is nothing in the iCloud shouldn't the same thing that is on my phone.  I went to Verizon and they said it was a problem for apple.  Help!

  You need start the game up more so that we can see if you have a backup, you can restore from. Go to settings > general > reset > erase all content and settings so that you get the Hello screen. Then, you configure the iPad, sign your iCloud account and when asked if you want to restore from a backup to say Yes and see what is listed to choose from for restoration.

  After the back if you don't see any options for restoring your backup.

  See you soon,.

  GB

• Satellite L300D - how to restore factory default and USB key?

  Hello

  I need urgent help. I got an error on my laptop and I lost my recovery disc, so I borrowed a friends disk by mistake. I deleted the partion that everything has been installed on.
  Can someone please help urgently? I have all my files on a USB key and really need to give a presentation on my laptop by Thursday September 23. Can someone please? I read about a secret partion on laptops to default factory default

  concerning Ross

  Hi elrossco22,

  What Satellite L300D, you have exactly and are - this a European model?
  If yes try to access the Windows Advanced Boot menu and choose fix my computer. Then, you can start the recovery of HARD drive feature.

  If this isn't the case, you need a new Toshiba Recovery disk to restore to factory settings. You can order such a drive here but it s for European models only:
  https://backupmedia.Toshiba.EU/landing.aspx

• I returned my iPhone5 to factory default and gave it to my granddaughter.  She wants to download games etc but the itunes store guard asking my ID and PW.  How can she save herself?  I received and email to say that PW tried to reset

  I returned my iPhone5 to factory default and gave it to my grand daughter as a Christmas gift.

  • She wants to download games etc but the itunes store guard asking my ID and PW.
  • How can she save herself?
  • I received and Apple to say that someone had tried to reset my password by e-mail.
  • It is probably her mother because she also asked me to tell him my PW and ID.
  • I currently use my PW and ID on my new 1Phone6 and do not want to share this.

  Can you please help.

  Julie Bateman

  She needs to log out of your Apple ID in the store and just connect with hers. Go to settings, iTunes and App Store and tap on the Apple ID, then select Disconnect.

• Satellite P200D Factory defaults recovery

  Hello

  I post here in the name of an old man who bought a Satellite P200D-PSPBQE, S/N 28160997 K (Vista Home Premium French) who has gone through a series of problems. He cannot attend his book himself and so asked me to fix it.

  The laptop has especially worked for two or three years until this summer when it has overheated (as I can judge by touching the case) and switched automatically a few times off the coast. At one point the laptop wouldn't even step to the BIOS.

  Here is a rough summary of what I did then:

  I began to open the case, but it seems too difficult, so I closed it back and use a vacuum cleaner to clean the dust in the vents, restarted the laptop and it are returned and very well for a while. At one point, the owner of the laptop mentioned a small bug crept once out of the laptop but I don't mind at this moment.

  After some time, Vista has experienced various gels (maybe explore buggy but I couldn't judge I never looked in the event viewer that I had no idea what kind of help the EV could bring until very recently). I thought that this could be due to the many automatic switchoffs who listens to the Vista system files. I ran sfc/scannow, who pointed out a few errors, but cannot fix them. Yet it is not attached to the gel. I stuff ready for the usual save the data/reinstall vista and drivers/restore cycle data.

  On the recovery discs: I asked the owner for all Toshiba drives, but it didn't, not even the recovery disk based 100MB.

  I thought that automatic recovery of factory default partition existed but that he could not find its start-up in the manuals coming with the laptop. I was curious and thought, Hey, I'll start the recovery partition myself with a boot partition tool. I ran the Partition Magic CD reported contradictory of the partitions on the first drive, which prompted me to repair it with suggested partition table values: I stupidly pressed Yes and then not really started (or so I think). I couldn't see any recovery partition only two 80 GB system partitions, and data were present. A race of Ranish Partition confirmed it.

  Yet, I tried to turn on the laptop while pressing '0' at the same time, as stated in some tech forums but it didn't not start any recovery procedure at all.

  I could not find the recovery disk creator in the menu program so I downloaded and it started and it reported, no partition recovery not found.

  As I found myself helpless without any recovery solution (I had not heard backupmedia.toshiba.eu) I downloaded a copy of Vista of P2P (Yes, it's bad, but I was impotent). This laptop has two hard drives of 160 GB, of which the second was not used. I exchanged the places of two readers, installed Vista using the product key from COA to empty disk. I installed the display driver and the retrospective data is restored and the laptop is back on the spot two, running OK, but still from time to time of freezing.

  Finally, I decided to call the assistance of Toshiba in France who reported to me on the backupmedia.toshiba.eu site where I can order recovery disks.

  _Before I order backup disks I have a few questions: _

  Can I open the case and do a thorough cleaning of any dust remaining/bugs/etc? (I guess that the answer is Yes) Are there instructions for that?

  Maybe hit the cpu overheating. Should I run a test of cpu and which?

  Overheating may have affected the memory modules. Running Windows Memory Test enough or do I run Memtest 3.x or later version to check the memory sticks?

  Is there really a recovery partition on the hard drive of this series (P200D-PSPBQE) system? If Yes and given the Partition Magic probably changed only the partition table, is there a way to restore the original partition table values and thus to restore access to the recovery partition? That would save me the trouble to order backup discs.

  backupmedia. Toshiba.EU offers you to order a backup for 35 euros drive about it's a drive to restore default factory containing Vista, drivers and tools, or just the basic restore disk that starts (currently absent) recovery partition? In the second case, how to restore the laptop to original factory settings?

  Thank you for reading this far, sorry for any English mistakes and thanks in advance for any input,
  Eric Ivanov,
  Grenoble, France

  > Should I open the suitcase and do a thorough cleaning of any dust remaining/bugs/etc? (I guess that the answer is Yes) Are there instructions for that?

  I wouldn't recommend disassemble the laptop. This should be done by a mobile technician who knows what to do if you want to remove dust or debris from cooling vents, I would recommend using a jet of compressed air and you may suck dust.

  > Overheating may have touched the cpu. Should I run a test of cpu and which?
  Perhaps this is possible, given that the laptop is two years (or more) and during this time, a lot of dust might collect inside the cooling modules.

  > Overheating may have affected the memory modules. Running Windows Memory Test enough or do I run Memtest 3.x or later version to check the memory sticks?
  A higher temperature can affect all parts of the laptop also memory, it was the case in my old notebook. BSOD was always because the memory could not be cooled. But I doubt that memtest would help you if the higher temperature would affect modules

  > Is there really a recovery partition on the hard drive of this series (P200D-PSPBQE) system? If Yes and given the Partition Magic probably changed only the partition table, is there a way to restore the original partition table values and thus to restore access to the recovery partition? That would save me the trouble to order backup discs.
  You cannot restore the HARD drive recovery partition. If you are not able to start the HARD drive recovery (pressing F8-> fix my computer-> HD recovery), you must order the disk from Toshiba Web page.

  > backupmedia.toshiba.eu offers you to order a backup for 35 euros drive about it's a drive to restore default factory containing Vista, drivers and tools, or just the basic restore disk that starts (currently absent) recovery partition? In the second case, how to restore the laptop to original factory settings?
  This s recovery disc that contains the image of Toshiba. Toshiba is a package that contains the Windows operating system (Vista), drivers, tools and additional software. Simply said; This disc would fix the laptop back to factory settings.

  Hope this might help a little.

• Load the HP Factory Defaults

  Hello world

  I am trying to load HP Factory Default keys, but when I try to select the language of the touch screen no longer works.

  Yes I see.

  Your installation Windows 10.

  Already upgraded to Windows 10 and are clean reinstall again?

  If so, what method or steps do you use? USB or from the desktop?

  IF you reinstall 10 once again, it would be a good idea to do it via USB and Media creation tool Windows 10

  You also need a microphone USB OTG cable adapter, hub 4 ports, wired keyboard and mouse, because the touch screen will be unavailable during the installation.

  I would like to know how you install and if you need more help.

• How to reset to factory default settings, as if it was brand new?

  I have a laptop Toshiba L300. I want to reset the laptop to factory default settings.

  The reason is that whenever I use the browser firefox internet and explore when I do a search using the search engine, and when all the search results are listed and I click on a particular site, it takes me to a page at random. Once in a while, it may take me to the page I'm supposed to be after clicking on the site, but most of the time it takes to a crazy page irrelevant.

  So I downloaded another web browser (google chrome) and there is no problem at all. I hope that if I restore the default settings, the problem can be solved.
  Can anyone help?

  Hey,.

  Yes, I think reset factory settings would be best choice for this issue. You can use the recovery disk or recovery disk Toshiba feature.

  Where is the difference?

  -The procedure of recovery of HARD drive, you need to start using the advanced boot menu (F8) and repair my computer option. Follow the instructions on the screen and Windows will be resettled in the files on the HARD drive second. Only the first partition will be erased

  -The Toshiba recovery disc erase your entire HARD drive. This means that you should back up files on the second partition as well. In addition you must boot from that disk.

  Good luck! :)

• Cannot install Recovery factory default on Satelite A500 system

  Hello

  I can't recovery my system to factory default.

  I have a Toshiba Satellite A500-148. She did with Windows Vista and a few months after I had received an upgrade to Windows7, Toshiba.
  One of the first things I did was to create a DVD recorey, and I still have it.

  Now I want to reinstall the entire system with Windows7 so I think do a default system recovery in the factory using the Toshiba HDD Recovery option. BUT I can't do that.

  Firstly I have red the instructions shipped with the laptop, and tried to follow the fashion.
  The instructions that I try to follow up was:
  -Reboot the laptop
  -press F8 during startup
  -Choose the entry "repair your computer".
  -Choose the layout of the keyboard
  -enter in my account to access
  The following options appear:
  -Startup Repair
  -System restore
  -Restore Windows complete PC
  -Windows Memory Diagnostic tool
  -Command prompt

  I expect the "Toshiba HDD Recovery" option, but this option is not shown.

  So, I ask for this help.
  I'm doing something wrong?

  Mind you, I already did (a software factory using the Toshiba HDD Recovery recovery option default) in the past, most exactily before installing the upgrade to Windows7. But it was a long time ago and I'm not sure all the steps that I had done.

  Kind regards
  Ricardo

  > Now I want to reinstall the entire system with Windows7 so I think do a default system recovery in the factory using the Toshiba HDD Recovery option. BUT I can't do that.
  After that update Win7, everything changes so if you have factory settings again use please created Vista recovery discs.
  > Notice, I already did (a software factory using the Toshiba HDD Recovery recovery option default) in the past, most exactily before installing the upgrade to Windows7.
  Fix. As long as you are using Vista, you will be able to use this option, but after upgrade is not.

  Reinstall Vista and later you can do what you want. Either use you Vista or Win7 to be upgraded again.

• HP Envy h8 1409: just restored to factory default and now windows 8 is not activate! Help, please!

  Recently, my PC started a little all around to have massive problems that I don't mind going into details, but I decided that after 2-3 years to possess, I would restore it factory default. It hurts but it would be a good idea, because I knew that windows are installed on it and apparently, this model is supposed to just reinstall without any problem...

  I have no idea what the hell happened, but now he has not activated windows. I know that the product key, and when I get it, it says "your product keys works! Continue when you're ready', then when he starts to deal with it, I get the error "the following error occurred while trying to use the product key:

  Code:

  0xC004F01F

  Description:

  The software licensing service determined that the license is not valid. »

  So seriously, what the hell am I supposed to do? Please help me

  Hello

  If the original HP recovery partition is intact then you should be able to create the recovery media.

  Before attempting to improve once again, use a hard drive of commerical known reliable product imaging in the image of your hard drive to external media.  This will save you a lot of time and effort, if you never experience questions requiring to return to a fresh factory restore and then have to go through the whole update process again. The image will also save you if your hard drive fails.  If the HP recovery media is the plain W8 then take the shot.  Then after all the updates are applied and your with set success to date to W8.1 and then take another picture.

  Thanks for posting on the forum.