BlackBerry smartphones restore contacts BBM BB7 after using the BB10

Similar Questions

• BlackBerry smartphones can not remove photo after using bbm

  I had a picture I sent with BBM. After that discussion identified and ended I tried to remove the photo but keeps saying file is in use. I tried again and again remove including power off the power and remove the battery for a few minutes then try again but still no luck. It becomes very frustrating because it should no longer be "in use".

  Solutions or ideas would be greatly appreciated

  OK, come back to your home screen, press the Menu key > change application.

  In this Ribbon bar, you see the 'pictures' or the media icon, which if clicked, display the picture?

  Somewhere, it must be open.

  You are connected to the USB cable to the PC?

• BlackBerry smartphones restore Contacts

  I used the option to RESTORE my back upwards, the software restored everything EXCEPT my Contact list.

  I also tried to restore specific items... the ability to restore contacts does not check the box for the restoration.

  I have a Bold 9700, abt 2.5 years. Due to some glitch the complete contact list is located in the back-up, my google sync has only half!

  Any suggestions please

  Try to disable your Google Contact sync and then to perform the restore.

  Read this Article ID: KB22430 How to enable syncing wireless contact with the BlackBerry Internet Service

  In the article, where it says to activate, you disable.

• Menu "BOLD" of blackBerry Smartphones changes back to default after changing the battery, but changes back when original battery in

  I wanted some advice about batteries for my Blackberry "BOLD". I bought what was believed be an OEM battery so I had a back up when the original battery ran low on the ground outside, etc. But when I turned off the phone and remove the original OEM battery and place my purchase new battery in the phone, the menu has changed the appearance of the default menu and with no icons email I normally 5. The phone works fine, but the email icons disappeared now. If I replace the 2nd battery with the original OEM battery, he then returned to my menu customized with all the messaging icons in the menu.  Can someone please help with this problem. Is this happening because the 2nd battery purchased well stated as an OEM does not have the secure chip and alleged encryption that is used by the "BOLD" BB Phone to ensure that you are using an authentic product OEM Blackberry? Should I just buy the battery via Blackberry at full price or can I get the other distributors who claim to sell the correct OEM battery with the chip but at 1/2 to 2/3 of the price.  Or all the compatible batteries should operate independently without changing my settings and I may encounter an error with my phone, or is there an option that can be turned off in the phone to stop the resets.

  Thank you

  Hello

  I can't guarantee that the use of the OEM battery will fix the problem.

  I have no experience with Mugen batteries, so I can't help with that.

  I don't think that a battery of expensive means better. Specifications only.

  I buy my OEM batteries with the carrier that sold me the unit.

  It might cost a little more, but peace of mind and no warranty problem

  are worth it.

  I think there is a very good reason that RIM makes batteries,.

  and I am not prepared to find out why!

  JMHO,

  Bifocals

• BlackBerry Smartphones Icono 'contacts' no flame appears in the 9800 pantalla BBerry

  What tal, este're mi problema: in the mi blackberry pantalla don't torch 9800 no el icono 'contacts' como lo also appears? Gracias por anticipado

  Hola thanks for participate in el foro.

  Para you comodidad, BlackBerry tiene su propio foro community in Spanish.

  Aquí tienes el enlace para el foro: http://foros.blackberry.com/t5/Foros-de-Soporte-General/ct-p/bscf_es

  MUCHAS gracias!

• BlackBerry smartphone keyboard does not appear after clearing the error code

  I deleted just 'error 102 JVM"my storm and now the keyboard is not displayed. I tried popping the battery while it is on, I also tried to attribute the convenince key to display the virtual keyboard and it does not work.

  I forgot to write the file I had to remove from the event log (to clear the error).

  Any suggestions?

  lol, he likes to go to the doctor and saying "doctor!" I'm hurt! "But I don't remember where!

  You have two choices:

  Do not forget the name of the file and place the file using this process.

  Reinstall your operating system to your BlackBerry.

  See the link below to download it, and here is the simple installation instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

  Hi Kenelms,

  You can follow this link & check if it helps.

  HOW to: Set up hardware profiles for laptop computers in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• BlackBerry & Smartphones Photos Contact names ceased to show (9650)

  Hello:

  Earlier, I added photos contact to all my BBerry Contacts.  It worked perfectly for quite a while.

  But the last 2 weeks (or more), when I get a call I get no resources and no contact photo.  Just the number, which, if I don't recognize, I'm going to ignore.

  (The reason why I have the names and photos is so I don't have to memorize numbers.  )

  The contact photos are always in my contacts list, so nothing happened to them.  And ss as much as I know I haven't added new applications.  So I'm puzzled as to why they would suddenly stop showing when I get a call.

  Anyone know how I can make them work properly?

  I covered this Council and google for an answer and not found anything.  Thank you very much in advance...

  Hello

  I would recommend to check if you have encryption enabled on the BlackBerry smartphone or press card. Go to the Options-Security Options. If it is enabled, disable it and try again then take out the battery.

  Thank you

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• XP unbootable after using the recovery disk, but Linux will be

  I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

  But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

  Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

  Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

  Thank you

  B.

  Not sure how a restore xp cd may give you the option to start the recovery console.

  With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

  In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

  the commands are:

  Chkdsk /r

  Fixboot

  bootcfg /rebuild

  FIXMBR

  Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

• Should I update all the files from the Toshiba site after using the recovery CD

  I just used my recovery CD and update the Windows Update System.

  The question is: should I update all files in the files on this site download section as well?

  Usually after using the Toshiba Recovery CD everything should works and works correctly
  To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
  But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
  Small is my opinion...

• Restoration of old keychain after resetting the default keychain

  Restoration of old keychain after resetting the default keychain.

  I have "reset my default keychain" in Keychain Access after learning that he was the new version of "first aid" on the update OS X El Capitan.

  He said that a new keychain will be saved by default and moved my old side (but not deleted)

  I want to restore my old bunch who was moved aside but can't seem to find all the information on how to do it.

  Thank you very much

  Elliot

  The old keychain must be in ~/Library/keychains.  Rename the old keychain back to login.keychain.  If you do not know the password for the keychain of old connection then you will not be able to unlock it.  The old login Keychain password is different from the user account password, you'll want to change the corresponding password.

  

• My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

  After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

  I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

• Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

  The best way would be to make sure that your layer is not a background layer: click the lock icon in this case. Then click the icon at the bottom of the layer panel layer mask. This will create a mask that you can refine and not be destructive.

  

• Background layer unlocks and becomes the normal "no flat" layer after using the crop tool in PS CC 2015.1 (a different behavior for older versions of PS)

  Hi all

  I found that it is more difficult to explain than I thought

  I don't like the new behavior in the latest version of Photoshop (CC 2015.1) regarding the way in which the background layers automatically unlock and convert to regular layers after using the crop tool. It's completely different to how things worked in previous versions, where a background layer remained in locked state flattened after using the crop tool.

  I get a LOT of images and this change has added an extra step to each image that I harvest, because I flatten the layers after cropping before saving the image. I looked through the preferences but cannot find a way to change this new behavior. Am I missing something?

  Thanks in advance for your help

  See if checking Delete the cropped Pixels in the tool options makes a difference.