blocked fax

Similar Questions

• How stop 'blocked faxes' to print automatically each time?

  All the models in a single Pro L7780 C8192A, running on Windows XP

  I can't stop each blocked fax, prints of printing as follows:

  Note: Blocked calls are not displayed on this report.

  For more information. See junk fax report years caller ID

  Indicates the date and time only

  There are several settings to print/do not print fax reports. See the following article for more details:

  http://support.HP.com/us-en/document/c01326515

• Blocking unwanted faxes from private numbers.

  How do install you the machine to block unwanted faxes from private numbers-no listed or unavailable.

  Hi smittie27,

  I misunderstood. No, you can't block faxes from unknown senders. I did some research, as I thought you might have a fax digital statement option. This would have enabled allows you to print faxes only you choose and all other faxes would be archived digitally. It turns out that this option is available for the high-end Officejet like the 8600.

  The only other thing I can think is to call your phone company. I wonder if they are able to block unknown numbers of campers through the fax line. I'm not sure whether they can do this or not, but it might be useful to call and ask.

  I'm sorry I don't have better news, but I hope that answers your request.

• While a single J5780 - BOUNCING fax

  Hello

  I'm down like muxh info I can

  I have problems of fax. It is intermittent and I made the diagnosis.

  It is especially large fax (10 pages or more) and he stops in the middle and gives me an #346 error.

  I called the phone company and they claimed telephone line was clear.

  Also disabled all the call waiting and voicemail on this line.

  I faxed test fax HP and machine sent said.

  I have no set of blocked fax numbers

  run fax test and said everything was ok.

  I know that I forgot something... counsel would be greatly appreciated!

  Thank you

  Dawn

  the J5780 is only designed to work with analog phone service and digital phone service not. so if you have a modem which has connections for your phone, TV, internet, etc., then fax may or may not work with it.

• HP LASERJET PRO M225dw MFP: MFP M225dw, BLOCK JUNK FAXES

  CAN'T FIND A SETTING TO BLOCK JUNK FAXES

  Hi @RTRP ,

  I see you like to block unwanted faxes. I would like to help you today.

  You can access the unwanted faxes, by clicking on the Fax icon, select Fax Menu, delivery Options, block unwanted faxes. The options listed are:

  • Add the number
  • Remove the number
  • Remove all numbers
  • Print a list of unwanted faxes

  Have a great day!
  Thank you.

• Windows Picture and Fax Viewer is blocked with force close after seeing some pictures on my computer (os win 7))

  Hello

  I am facing problems with Windows Picture and Fax Viewer, it crashes after viewing the rare photos (ex: 6-10 + photos).

  My OS is win 7 home basic SP-1.

  This product even after reinstalling the OS, can u please help me?

  Thank you
  Sharath.

  Hi Sharath Reddy,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with crashes Windows Picture and Fax Viewer.

  This problem could be due to outdated video card drivers: -.

  1. When was the last time you were able to use the photo viewer?
  2. have you made changes on the computer? For example:-hardware or software
  3. what type of video card do you have on the computer?

  Method 1:
  Try also to clear temporary folders by going to
  a:  Click on Start and type in run and press enter
  b: In the Run window, type % temp % and press ENTER. Opens Windows Temp
  c: Delete the contents of the Temp folder

  Method 2:
  This issue could be with the old driver files, that's why I suggest you to update the latest drivers on your computer.

  Step 1 : to get the latest drivers for the computer.

  Click on the link below for more information on the update of drivers.
  http://windowshelp.Microsoft.com/Windows/en-us/help/b3c6477e-1111-4B9F-A52A-fffdc51e9c901033.mspx

  Step 2: Now you need to reduce the hardware acceleration on your computer and look for the number, to determine this, click on the view tab and then, under DirectX features, check to see whether DirectDraw, Direct3D, and AGP Texture acceleration appear as disabled. If this is not the case, try to reduce hardware acceleration.

  a:  Open Screen Resolution by clicking on the Start button, Control Panel, and then, under appearance and personalization, click on the resolution of the screen.
  b:  Click on avancΘs.
  c: Click the Troubleshooting tab, and then click on change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d: Move the hardware acceleration to min.

  Please let us know if the steps above resolved the problem.

  For more information you can visit the link provided below.
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

  Answer to us if you are having problems with Microsoft Picture and Fax Viewer or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• OfficeJet pro 6830: continuous fax tone

  I recently bought a HP Officejet Pro 6830, I do not use the installation of fax and therefore it is not connected to a phone line. All the time that printing is turned on there is a tone of continuous fax from the printer, I tried to disable all the Fax options on the Tools menu, but nothing can stop the very annoying tone - of ideas?

  Thanks for that Z, they send that another block so hope it does the trick - John

• LaserJet Pro M127FW: LaserJet Pro M127FW stuck to print Fax Page 1

  I encounter an error on the MFP HP LaserJet Pro 127FW where it is blocked to message "Printing Fax Page 1". Cannot do anything else on the printer. I tried feeding this bike but still does not work. It has been like that for a few days now.

  In my view, there are some instructions on other threads to do a hard reset. Help, please.

  Thank you.

  As this does not work, I'll send you a private message describing how to perform a factory reset. You should see a private message to your forum Inbox shortly.

  Please let me know if this clears the fax message.

• HP Officejet Pro 8715: eliminate unwanted faxes

  I recently bought an officejet pro 8715.  I want to eliminate unwanted faxes.  But many shippers send the fax with the fax number not identified.  (I can't block these faxes unidentified).  I want to store all the faxes on the 8715 and then post them on my computer before printing.  In this way, I only print the faxes that I want.

  Can I do this?

  Harold681

  Hey @HAROLD681, welcome to the Forums of HP!

  You can certainly store your course of phases on your computer and print the ones you choose to print. Information and instructions to configure the functionality of digital fax begin on page 10 of the user manual.

  If this solves your request please click accept button Solution below to mark your post as solved. If there is something else I can help with that let me know. Thank you.

• M277dw MFP: Error Message "No. Fax detected" on the incoming-outgoing fax works fine

  I have the M277dw MFP for my small business. I have a phone line for faxing. I can send outbound faxes without problem. I can not receive incoming however. I receive a confirmation by fax with a result of "No fax detected". I ran several times self-diagnosis and the machine always says all systems are good.

  Hi brain2900,

  Welcome to the HP Support forum.

  I understand that you have a printer HP Color LaserJet M277dw MFP Pro you are able to send faxes with, but unable to receive faxes even if all goes on the fax test. I would like to help with that.

  Fax reception problems are caused more by telephone line conditions. Several telephone companies offer services which are intended to warn you of the voice mail during a call or prevent unwanted calls. These services can block calls or interfere with the transmission by fax and cause the fax failure. If there is any of the following services on the telephone line connected to the printer, contact the telephone provider for the recommended solution.

  -Answering machine

• OfficeJet 6700 Premium: Fax software does not load

  Hi people.

  I had my 6700 for awhile now, but only recently required the use of Fax hospital.

  What I've found, is that I have a problem with two things.

  When I open HP Print Wizard there are two things that start to load but never actually do. They hang around 50%.

  It's "Manage fax settings" and "digital SAF Setup Wizard.

  I tried to remove and reload the software, but no luck.

  Does anyone have a solution?

  Hi @BigDingus,

  Thanks for getting back to me.

  I see that you could reconfigure fax and digital fax, that is great to hear configuration settings.

  I understand that you have uninstalled and reinstalled the software, which does not seem to heal. At this stage, I can only assume that the problem is a software conflict, which blocks the ability to use these features in the HP software. The SAP offers same utilities, I would use the built-in Web server in the future.

  If you have additional questions, feel free to contact me.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Printer udskrivning is blocked by "scannerfejl".

  All-in-one hp 2175 printer is blocked. The display shows "scannerfejl, turn off and on again. It does not help.

  This has already happened once and fixed itself, but now we can't fix.

  What can we do?

  Hello

  1. What is the exact error message that you receive?

  2 have you made any changes to the computer before the show?

  I suggest you follow these methods and see if they help.

  Method 1: Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: A "Failure of scan" Message appears on the all-in-one control panel and you can not scan, copy or Fax

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00587971&LC=en&cc=UK&DLC=en

  See also: solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  If you are not comfortable with English, support for international sites additional options can be found by following the link below, please go through it:

  http://support.Microsoft.com/common/international.aspx

  I hope this helps!

• Fax fails on a single number, then worked on the second try

  I have an Officejet Pro 8600.  It works great except for one problem.  I have to fax my timesheet to another office, so I programmed the fax number in the telephone directory on the fax.  When I send the fax, I get a printout of fax failed with error 351.  I turn around and there refax, and she goes through fine.

  This happens without fail every time this number only.  I can fax other places very well, but not this one.  I tried to return the number in the phonebook and I tried to manually dial the number, but the same thing happens.  First test gives the error message and second test is going through.

  Any ideas on what may be the problem?

  Thank you!

  jachang,

  The rerouting would make sense - if you try the number very soon, within seconds, and the 'way' is blocked, then the signal - phone call or fax - find another way to make endpoint.

  There may just be something on the path of this company in particular or place in the world of telephone line, which is difficult to reach for this fax signal.

  The explanation may be completely wrong.

  I've dealt with this kind of question at our two locations for decades (Yes) - there is not a lot that's not happened to our son, boxes, poles: animals, bees, cable crews working on "other equipment", storms, ice, rocks, trees (branches or trees all fall), the occasional Act of vandalism, mystery suddenly disconnects, cars crashing into the junction boxes (it was exciting for a while - our phone is connected to a mystery phone number) for a few days) and just plain old noisy, dirty, bad weak signals.

  • Try a filter of such line suggested in fax configuration instructions, if such is available for your printer.
  • Make sure that you are using the telephone line that is appropriate as it is shipped with the printer therefor, if such has been provided in the box.
  • If there is a wireless phone very close to the printer, move it a little further - say a metre or more.   This is useful if the wireless telephone is an older type, say the 2.4 GHZ that may interfere with the wireless.  It can help the fax?  Meh.  It does not hurt to have things like neat and confrontational as possible 'no' when you have weird questions.
  • Make sure the wires just behind the point of connection into your wall jack for the connection of telephone line, are wired safely and are not loose.  You should only remove the plate and check it.   Be careful, of course, especially if this isn't your area of expertise - have a friend to watch if you're not comfortable with the idea.

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• How can I disable my fax machine and turn it on only when necessary = officejet 8600

  Fax interferes with my answering machine when the printer is turned on.  I would turn off and only turn it on when I'm expecting a fax.  How can I do this?

  Hey Waddas,

  Then have that AUTO answer, the fax system is blocking voice messages to come through?

  You said earlier that you only need fax function when you know that a fax is coming through.  If you know that a fax is coming through, you will then know to be able to hit the reply on the printer button.  The auto-answer being set to OFF should allow voice messages to come through and allow the user to manually accept a fax call.

• FAX-SPAM

  Hello

  I have a HP all in one PRO L7780 printer, I'd like ask questions about spam that we received in our fax machine, is there some way we can configure the printer in a mode that we can select the items to receive, or how can we stop this spam, is a waste of ink. A good suggestion.

  Thank you

  MARIA

  [email protected]

  Try this:

  1. press the SETUP button.

  2. press the right arrow key to navigate and then go to BASIC FAX SETUP and press OK.

  3. go to Junk Fax Blocker Setup and press OK.

  I would like to know if it works.