Bluetooth and Satellite M40
I have a question:
My M40-265 Satellite has had the opportunity to connect with other machines of Bluetooth?
If this is not the case, how can I do this? How it would be to handle this?
Nick
Hello
Unfortunately, there is no Bluetooth this device.
In this case, you can use a Bluetooth USB adapter or an of Bluetooth PCMCIA card.
For example:
http://www.EverythingUSB.com/hardware/index/Belkin_Bluetooth_USB_Adapter.htm
Good bye
Tags: Toshiba
Similar Questions
-
How do I start bluetooth on Satellite M40-184
Hello
I bought a new Satellite M40 and I found that I have the Bluetooth Manager, but it does not show me the that Bluetooth at all besides it still gives me the message "Bluetooth device is not ready" even when my bluetooth is turned on! Kindly let me know how to solve this problem, as I have been through the whole pages of starting Instructions and possible help, but nothing seems to work. ThanxImran
Hello Imran
It will be interesting to know what unit should be connected to your device (mobile phone, printer). I hope that use you the FN + F8 key combination to activate the Bluetooth connection. If the Bluetooth connection is enabled you can start a wizard and search for other Bluetooth devices.
-
Bluetooth and Satellite A100-580 (PSAARE-03101TFR)
I bought my Satellite a couple of weeks, and I can't use the bluetooth connection. All drivers and programs are installed, but nothing semms to work. Oddly enough, there is also nothing talk bluetooth in the control panel. Is this normal?
I'd appreciate the help.
Thank you toHello
one question: are you sure that a bluetooth module is physically installed in your system? It would be very interesting, because if you have not installed modules then it s self explaining that no bluetooth hardware is listed in your device manager.
I googled a bit autour and discovered, that your machine is not equipped bluetooth when shipped from the factory, so I think you really need to know if you have installed.
Welcome them
-
Hello
I have a Satellite M100 and I think that it supports Bluetooth, but so far, I could not use it or even locate. The only indication I have is that there is in ' Add/Remove Programs 'category' Bluetooth stack ".ยป Except that I couldn't use it and I have my laptop for a year in an orderly manner.
So please help me.
ElpidaYou should have a look at the following thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24061 -
.. .and probably the Tecra A4 as well...
I followed the advice given here http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15684&messageID=57439
and here (bottom of page 2) http://www.pro-networks.org/forum/about78185-10.html
to remove the pcmcia.sys file.Now I'm typing this from Vista (5600 rc-1) - Finally, it works! But I hope that it is not necessary to do this when it goes on sale next year.
Good luck to everyone who wants to try it.
Hello
Thanks for this useful info.
I n t have vista on my laptop at the moment but I will next time. -
Bluetooth and Satellite L10 144
I bought one L10-144, a laptop up. Now, I also had a Nokia 6230i, with Bluetooth. No blue tooth in my notebook. So I bought a Logitech Bluetooth wireless mouse with (they said) wireless hub, so that is a thread from my laptop to my laptop. This is not very practical with a laptop which I take it everywhere. I also do not want a stick at the back of my laptop.
?? Any1 know what I should buy for something in my book for the Bluetooth device?
?? Is it a module kit?
?? What is the price?
Answers please in simple English > English is not first languageHello
As far as I know that the Bluetooth is not available on your device. In this case if you do not want to use Bluetooth technology, you will need to use the device Bluetooth (Bluetooth USB key). Sorry but in this case you don t have another option.
Good bye
-
Cannot use BT on my Satellite M40
Hello
I have a problem with my bluetooth on Satellite M40 PSM42 bluetooth not working not one is impossible to uninstall the present on unisntall Control Panel programs, the same thing happens when I install the new version 5.10.12 bluetooth Toshiba stack, error said...
isn't the E: Unit and complete the installation or uninstall the bluetooth stack.I need help, I can not connect my cell phone to bussines.
Thank you for all.
Alejandro
Try this:
Take out the battery-BT.
Open Notepad and enter the following lines:
REM remove BT-stack now
MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / SB
REM Reboot now!
Shutdown - r f t 15
Save the file under "BT - remove.bat".
Double-click on it to run and wait for the system to reboot.
This may take several minutes. -
Satellite M40 - 114 bluetooth systemboard question
Hi all
I have question regardin my bluetooth and the motherboard.
Center of Service Toshiba has replaced the motherboard in my laptop.
I can't turn on my bluetooth for the replacement of the motherboard. FN + F8 doesn't work and bluetooth stack reports ' bluetooth device is not ready ". reinstalled XP via orginal Toshiba CD-ROM. But does not help.I discovered something strange, is that in the software sis sandra 2005, my laptop is reconignezed by satellite A40 PSA40U. They replace the motherboard with an old model? This could be the reason why the bleutooth no longer works?
Your help/advice is necessary. Thanks in advance
Hi phyl
As much as I know Satellite M40-114 doesn't have Bluetooth and I can't understand this before the replacement of the Board of Directors the Bluetooth system was on board. I know that the M40-193 has a Bluetooth.
Please check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5071. There is an interesting discussion on the M40 and Bluetooth.Good bye
-
Satellite M40-225: confused about Bluetooth
You just bought a Satellite M40-225. Checked forum for issues of bluetooth but, to be honest, I got a little confused!
Basically I want to use bluetooth and guess I need some kind of adapter. Suggestions? Need to download drivers or anything like that too?
More... (!), I have a PowerMac G5 and airport network wireless broadband BT Yahoo. Is it possible to connect my new PC to a network of MAC - or is it the Devil's own work?
Thank you
Hello
Satellite M40 has no Bluetooth. This means that you must buy a USB BT's key. It's not expensive and installation is very simple. Usually, if you buy the one that you will get the software CD. Before installing any software, check if your unit has installed Bluetooth stack.
I'm sure you will find battery Bluetooth for Windows by Toshiba V3.10.00 on your device. In the control panel check Add and Remove Programs option. List all the installed components.
Good luck!
-
Re: Bluetooth hardware not detected on Satellite M40-145
Hello
I recently changed the HD of my Satellite M40-145. I have successfully used the recovery CD, office etc, and now everything seems to work fine... All except the Bluetooth, it is not detected (this laptop has a Bluetooth chip internal). It does not appear on the Device Manager list. I was reading some FAQ in the web of Bluetooth Toshiba and tried to install it again Toshiba Bluetooth Stack but there is still not detected. Any idea?, any solution?
Thanks in advance for your attention (and I apologize for my bad English)
If your laptop is preinstalled with original recovery image please activate the BT module (WLAN WIFI switch must be ON, and then use the FN + F8 key combination) and I hope that BT's standard installation starts automatically.
When you are finished Device Manager check again. The components of BT enabled and installed should appear correctly.
-
Satellite M40-185 - Bluetooth is not ready - can not use
I have the Satellite M40-185
I cann't use bluetooth. The problem is:
At the opening of all programs--> Toshiba--> bluetooth--> bluetooth settings--> selection of menu bluetooth--> add new connection, a pop up appears with a msg "Bluetooth is not ready", then the bluetooth icon appears in the status bar.BUT I still cann't use Bluetooth.
ALSO, when I open--> open device Bluetooth PCMCIA card Manager, a window appears with a button asking me to install a program.
What is it and where can I find it?
Do you think that this is the problem?In your case, I recommend using a simply external USB Bluetooth key.
It of easy to use and the installation is very simple. -
Satellite M40-237: how to connect the mobile phone with Bluetooth
I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???
Hello Iva
A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.
To establish a BT connection with his mobile phone that he uses the key USB BT.
By the way: fact Iva comes from Zagreb, Croatia?
Good bye
-
Satellite M40 - format and install NO CD from recovery
Hello
I need to format the hard drive and install XP Pro SP2 on my Satellite M40 - 239 (pre installed XP HE). How do we install the Express Media Player? Do I need to do before installing with my own XP disks? The Express Media recovery disk reformat the hard disk and let me choose the size of the partition etc.? Or should I first install XP SP2 (not from the recovery disk, it is my own), then the media player? And how do I install all of the tools supplied preinstalled in the factory? On the product recovery disc, it seems there is no installation of software for them, am I stuck with XP it if I want to keep the tools (Bluetooth, ConfigFree etc.)?Hello
Well, the drivers needed on the Toshiba page you will find:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Please also check out this other post:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8872On the express media player:
Should at least 150-200 MB of available free space on the HARD drive.
This free space must be on the end of the HARD drive and there must be unallocated.
To get this space available on party products 3rd HARD drive must be used.Please also check this document
http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htmGood bye
-
Keys satellite C850 - Bluetooth and shortcut of Microsoft Word questions
Hello.
I had one laptop C850D-107 Satellite as a gift, but I discovered that there is no driver bluetooth inside.
When I checked the drivers from this site for my brand, I saw two options; battery filter Bluetooth and bluetooth.Who am I supposed to download.
Secondly, I am used to use the F keys in Microsoft word and using shortcut General but my laptop has additional on the F - keys command as the F4 is for LCD and so on, thus, making it difficult to use the original commands. Is there a way I can turn it off?Looking forward to your prompt response.
Thank you.> I had a portable C850D-107 Satellite as a gift, but I discovered that there is no driver bluetooth inside.
No all laptops are equipped with a BT module or feature and the C850D-107 Satellite can't internal BT
> Secondly, I'm used to use the F keys in Microsoft word and using shortcut General but my laptop has additional on the F - keys command as the F4 is for LCD and so on, thus, making it difficult to use the original commands. Is there a way I can turn it off?
You can use the special function key mode which allows you to use the function keys without pressing the FN key. This can be changed _in BIOS_ (F2->-> Advanced tab-> System Configuration-> special function mode key in BIOS)
-
Satellite M40-192 - Linux and network
English (but not perfect ;))):
First I want to install Suse Linux 10.0 on my new laptop (Toshiba Satellite M40-192), but Installation did not work, and so I had to install linux in text mode. Now, there is another problem with Suse Linux... NETWORK.The Lan network is not working well, but the conifguration is right. Is there a will (drivers,...) or 'hope' lost, suse linux 10.0 running on my laptop? This statement, must then appear, I want to buy a laptop.
I hope that here follow many answers, to solve my problem.
Thank you!
Hello Dorfi
As you know that Linux is not supported by Toshiba and if you want to install it, you're on your own. Unfortunately, I have no much experience with Linux, but try it please visit the Toshiba Linux. You can find it under
http://www.Linux-laptop.NET/Toshiba.html
http://Linux.Toshiba-DME.co.jp/Linux/index.htm
http://newsletter.toshiba-tro.de/main/index.htmlMaybe you'll be lucky if anyone has the same or similar problem.
Good luck!
Maybe you are looking for
-
.....
-
Voltage Excitation for IEPE/ICP and IOTech 650U
Hi all I am using IOTech DAQ 650U (OR product no. 781277-01) with ICP/IEPE accelerometer. It works very well with accelerometers of general purpose PCB/IMI (IMI 607 A 11 model example). We want to use seismic accelerometers and wonder if IOtech 650U
-
Re: principal components analysis in LabVIEW
I want to the PCA of the FFT data (signal of known amplitude and time). I'm using labview 2009.I tried using the built-in pca.vi; but the difference in size of data. I am a student PCA for the 1st time in my life.please help.i do my last year on this
-
Error: 0x8007042c when you change the Windows Firewall settings
Original title: error code: 0x8007042c After the updates have been installed windows Sp1. my Windows Firewall failed to start. I have put all my default firewall setting. I tried to force it to manual startup. It fails every time. I get an error code
-
My DRIVER CD/DVD HL0DT-STDVDRAM GSA-T20N Deriver Windows cannot recognize the Driiver
I have already submitted the problem but I'll put new retail I was Unistalling Norton Antivirus 360 Vervion 5.0 and after restarting the computer didn't recgnize the K drive (CD-ROM/DVD-ROM) ie Windos cannot load the driver Impatience on your part Co