BPM Process Modeling

Similar Questions

• How to duplicate a payload in a BPM process?

  How to duplicate a payload in a BPM process?

  Thank you

  The screenshot of the process the Workflow tool that you used looks like it helped a split occurs with no melting downstream point.

  This is not allowed in BPMN.  Parallel and inclusive gateways must have a downstream melting point.  Because the model you have described has no melting point, it would be better managed using an activity to send without being involved a bridge.

  Once this activity send is called, another process (or service) is called asynchronously.  In this case, the process called can contain activities that you are showing "Path 2".  Once the send activity is called, the work item instance continues to the next step of the original process automatically and would go maybe through the series of activities that you testify "Path 1".

  Here is a recent blog post that I wrote which describes the patterns of different processes supported in BPMN and Oracle BPM: model processes using BPMN BPM | AVIO Consulting

  Hope this helps,

  Dan

• BPM process stops just to work on a Service mission (?)

  Hi, I work with Oracle SOA and BPM Suite 11.1.1.6.

  I have modeled, implemented, and deployed a BPM process successfully and it works perfectly until you get to a certain task in Service, almost an end oh the process, where to stop and not continue to complete the process. It just stops. Apparentrly that the Service task has been run successfully, because when I read the trace the task get the response from the service. But the failure of the process continue to run forever.

  There is a ComplexGateway after the service task that merge a parallel bridge. I implemented the complex gateway with the expression activationCount == 1 and unckecked the "Abort pending changes" option Any idea? Could be the implementation of complex gateway the reason for the detention of process?

  Thanks in advance

  Isabel Bernely
  

  I solved the problem! The question was that there are alternative streams which were fusion didn't at the entrance of the complex. I managed all streams finally in the gateway complex and the process went through instantly.

  I hope to help someone else.

• process model: include PreUUT and PostUUT step translates report

  Hello everyone,

  Little background:

  My test team has 4 writing code developer for 4 different components. The endurance test, we have common requirements as variable input voltage and of the temperature. Instead of using the common installation model, we prefer to use PreUUT of TestStand process model element. This helps each of follow us strict coding style.

  Problem:

  There are many examples to record the results of PreUUT and PostUUT in the report. However, all of these examples require change in file client sequence. How to implement this feature in the process template itself? So that developers do not have to ModelCallback process or use patterns in their code and still the tension updated the and temperature in ProcessModel could be connected to the report.

  Ah yes, I use TestStand 2013 (4.1)

  Concerning

  Benjamin

  Thank you, Julian.

  Some of your other posts has helped me solve the problem of the PreUUT. I don't know if this is the correct method, but it works very well for me.

  Did the following:

  1. in the ProcessModel activated sequence result record for any stage in PreUUT sous-séquence.

  2. in PreUUT sous-suite added after declaration-

  "" 'RunState.ProcessModelClient.Data.Seq ["MainSequence']." Locals.ResultList = Locals.ResultList

  And voila, I PreUUT step results in my report. I would like to have feedback on your part. Is this a good method? do you see any risk?

  The next challenge online is now to log PostUUT results in the report.

  Kind regards

  Benjamin

• prevent the 2 instances of process model

  Hello

  We have several testers in operation.  There is a particular test that we run, which has some downtime involved on the object to be measured, and it seems that there is no test running.  Then a person can come and try to run another instance of a sequence, so re - run model of process, trying to initialize the hardware that is already in use and causing a cascade of errors, screwing as the test that was running.

  Is there a property, I can verify from the outset in the process template, I can program into a command prompt to warn the person "there is already another ongoing test here, an abortion?" and "cleanly"?  Or better yet, is there an option somewhere in teststand as "to prevent simultaneous execution of process model" or such?

  Thank you

  David Jenkinson

  Try this one.

• Property to tell whether the process model has been run?

  Hello

  Is there a property to look at a sequence context, where I can tell whether or not the process model has been run?  I need to edit programmatically initialization step vi, depending on whether the process model has been run.

  Thanks for any idea,

  David Jenkinson

  RunState.Root! = RunState.Main

  or

  PropertyExists ("RunState.ProcessModelClient")

• Process model: additional results

  Hello

  I have again to TestStand (process templates) framework.

  I would like to set up the process for my project template include comments of step and stage requirements for each step of the sequence.

  I've seen solutions where sequence recalls were used to implement this. But this requires the incorporation of reminders in the sequence file which I don't want.

  How can I do this?

  Concerning

  Benjamin

  Hi Benjamin,

  Is there a reason that you can't use the callbacks?

  Reports in TestStand consists of 2 elements: Collection of results and reporting.  Basically, the report is generated on what is collected.  The collection occurs during runtime.  So basically, if your collection contains no comments and requirements then it is impossible that a report can be generated with this information (as this information is no longer in memory).

  However, since it is of the static elements of a stage you can potentially get away with the creation of some kind of reporting mechanism focus on disk in the sequence copy and enter this information using the API TestStand.  The idea would be that you would through your collection of results and looking at the result properties you could identify what stage in what order in which order was called file.  Then open this file in sequence and glean the demands and comments for that step.  Quite honestly, that would be a hairy algorithm.

  If you use the statement-fly, you can use the ProcessModelPostResultListEntry callback in the process model and information on the step and put it on the report.  It would avoid having to add all your file of the client's sequence recalls.

  Hope this helps,

• batch processing model loop

  How to set the model of batch TestUUT loop once? You need to use TestUUT and not only passage require the dialog box of the UUT.

  In process model so step ' Goto next batch "is modified to create a branch to"- end of batch loop -", discussions do not stop.

  Please advice.

  The simplest thing for you to do is in the verification of sequence/reminder pre-batch Parameters.ModelData.BatchLoopIndex if it is > 0 or > 1 (forget if it is 1 or 0 according to), then set Parameters.ContinueTesting = false rather than perform the steps that are normally performed in this order. That is it really. That should do it.

  Hope this helps,

  -Doug

• Secondary process model

  The States of TestStand Manual of reference on page A-4:

  "In addition to a primary, or parent, process template file, you can use a secondary process template file, or the child, to encapsulate specific functionality, such as the generation of reports."

  A 'model of secondary process' file is also mentioned on page 10-3:

  "A primary process template file can directly call reminder of model sequences in a secondary process template file. At runtime, if the sequence of the client to the primary sequence file file implements a callback defined in the secondary process template file, TestStand called the sequence reminder in the customer file of sequence, even if the primary process template file does not define the callback. You must add a copy of the sequence of callback for the file of main model for the reminder to appear in the dialog box file of the file of the client's sequence sequence recalls. »

  I can't find any additional information about the secondary process model.

  • Can someone explain how a secondary process model would be used?
  • Are there examples using a secondary process template?

  Thank you!

  1. how to create a / refers to a secondary/child process model?

  It seems that this is done by creating a sequence of recall in a sequence file 'child' AND 'parent sequence file.  Is this correct?

  To create a process model in general you open a movie file and go to Edition > properties file in sequence.  Then on the Advanced tab, change the model Type.  So that it becomes a secondary/child process template, you'd call a sequence on the primary process model.  For example, the SequentialModel.seq at one point makes a call to ProcessOTFStepResult in one of the encores engine in there.  Then, the ProcessOTFStepResult sequence makes a call to PutOneResultInReport (if you use the reportgen_txt.seq).  Then the sequence PutOneResultInReport makes a call to ModifyReportEntry (which is a reminder).  However, if I have a file of the client's sequence I intercept this result and make some changes.  So I would cancel this reminder.  But since ProcessOTFStepResult and PutOneResultInReport are not in the process template must have a mechanism for me to replace it with the customer.  It's because reportgen_txt.seq has a different behavior than reportgen_html.seq or reportgen_xml.seq.  So, it is not sensible to put everything in the process template.  Otherwise, your PM would be ridiculously high.  But you also have to make a copy of the reminder in the MP, so that the customer can see.

  2. the parent sequence file callback simply acts as a pointer toward the kid movie file recall?  Yes and no Cela depends on if it is called in the secondary particles or primary particles.

  3. how many levels of "models of child process" can create?  Is it possible to create a 'third-party process model? I just tested this out, and it seems that you can.  But you don't have to set the reminder in a high school.  Just the third layer and primary particles.

• Get name of running process model

  Hello

  I would like to test during the execution of my sequence

  (1) if there is a process model, who started the sequence

  (2) the name of the process template that was launched

  Anyone know the sentence?

  Cause I tried this in a stage of 'if' and it doesn't seem to work correctly:

  RunState.IsProcessModel & RunState.Execution.GetModelSequenceFile (). AsPropertyObject(). Name == "Single Pass".

  Thank you very much DowNow... It works very well!

• Dynamically set the Station process model

  I noticed in an existing position, to dynamically set the active process template, you use the Engine.StationOptions.StationModelSequenceFilePath property. (Search for "How do I dynamically (at runtime) the models?").

  But where do you put the statement that sets it?

  Thank you

  Oh yes I forgot to say in my last post

  You can make a file of sequence requires a specific process template.  So that no matter what the model of the station is on the sequence of file always use the designated model provide you.

  With the sequence file that requires that the new process model open go to Edition > properties file in sequence.  Under the Advanced tab, under model Options, select require a specific model.  You will then see a box of template file.  Navigate to your new template and select it.  Click OK to exit.

  Now, whenever this sequence file is opened, it will use this process template regardless of what is the model of the station.

  Hope this helps,

• method to set the station process model

  Hi ppl...

  I am building a custom in LabVIEW operator interface. I want to know the method to set the station process model.

  Thank you

  Hi ppl...

  I found the solution for this.

  We can use the Engine.StationOptions.StationModelSequenceFilePath property to set the model of the station.

  Thank you

• How to deploy BPM processes with the shape of the ADF?

  Hello world

  I'm a newbie on the BPM (11g) and ADF. I created a BPM process and an ADF train in the same project.

  I was wonder if I can deploy the makings of the ADF, and begin to test only the train before hook to the top of the form of the ADF with the UserActivity.

  How can I do? How can you deploy? Better create a jar or ear?

  Any suggestions?

  Best regards.

  Fairlie

  Hi Fairlie,

  Here is a brief one minute video that I just post on youtube you through one of the ways to deploy a project ADF - http://youtu.be/irt4_1IL0vosteps.  It's the deployment as an ear file.

  If you are using 11g, you will not be able to deploy in your integrated WebLogic Server that works using JDeveloper.  You will not be able to right click on the page of an ADF jspx file or its taskflow and click Run, if there is an ADF application used in conjunction with a BPM project and its human tasks.

  Hope this helps,

  Dan

• Separate the UI and BPM process deployment.

  Hi all
  
  We have memory problems while deploying our application (11.1.1.5) Fusion web on the server with following config Details: -.
  
  WebLogic server 10.3 (installable was generic to the 64 bit OS).
  Windows Server 2003 SP2 with 64-bit support,
  RAM is 8 GB.
  
  To work around the problem, now we want to deploy UI (ADF) separately from the BPM process.
  
  Is this feasible? If Yes, then how?
  
  Any help or pointers in this respect would be useful.
  
  
  Thank you
  PK
  
  Published by: user10314058 on January 12, 2012 01:33

  Hi PK
  Yes and infact the more standard to deploy a workflow application consists of 2 parts. One is the jar of workflow real sca, with all streams work, tasks and bpel stuff etc. And the other is full application itself with all projects such as TaskForms, any other EJB project, util, etc EXCEPT the workflow, and then ear deployment. Kind of JDeveloper, menu application level, you can create a deployment profile and add all projects (including taskforms) BUT NOT the flow of project work in the Assembly section. You're the ears. Then for Workflow project, you can always deploy to a JAR file. Take these EAR and JAR and deploy on any server of soa applications.

  NOTE: When you generate a JAR for Workflow, be sure NOT to check your TaskForm projects. It is the list of all projects with the boxes, do not check them.

  Re: Migrate a file TJS

  Thank you
  Ravi Jegga

• Access Oracle BPM process through Java stand-alone program

  Hello
  
  I'm trying to access BPM processes by Java program.
  I use Oracle BPM Studio 10.3.1.0.
  
  Code:
  
  package integration;
  
  Import fuego.lang.Decimal;
  Import fuego.lang.DynamicObject;
  Import fuego.papi.Arguments;
  Import fuego.papi.CommunicationException;
  Import fuego.papi.InstanceInfo;
  Import fuego.papi.ProcessService;
  Import fuego.papi.ProcessServiceSession;
  Import fuego.papi.OperationException;
  
  import Java.Math.BigDecimal;
  
  to import java.util.Iterator;
  import java.util.Map;
  import java.util.Properties;
  
  public class IntegrationManager {}
  public IntegrationManager() {}
  }
  
  Public Shared Sub main (String [] args) {}
  Prepare the IntegrationManager = new IntegrationManager();
  
  Properties configuration = new Properties ();
  Configuration .setProperty (ProcessService.DIRECTORY_ID, 'default');
  configuration .setProperty (ProcessService.PROJECT_PATH, "C:/OracleBPMWorkspace/Test");
  try {}
  
  ProcessService processService = ProcessService.create (setting);
  } catch (OperationException e) {}
  e.printStackTrace ();
  }
  }
  }
  
  
  I'm special suite:
  Exception in thread "main" java.lang.NoClassDefFoundError: fuego/directory/DirectoryException
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName(Class.java:247)
  at fuego.papi.ProcessService.getFactory(ProcessService.java:431)
  at fuego.papi.ProcessService.create(ProcessService.java:335)
  at Integration.IntegrationManager.main (IntegrationManager.java:55)

  East fuegopapi - client.jar in your classpath?

  You should find it in $BPM_HOME/client/Grandpa/lib