Briefcase is disconnect leaving orphans

Similar Questions

• Remove-vm leaving orphans

  Hello

  I'm sure that there is a simple answer to this, but I can't find it anywhere.

  When I try to delete a virtual machine, I get an orphan entry in the inventory. The command I use is

  Get - vm "www." Remove-VM-confirm: $false - deletefromdisk: $True

  Is there a simple way to remove the virtual machine from the inventory and to remove the data from the disks at the same time?

  See you soon,.

  Fastpud

  The command that you use is correct.

  Are you connected to an ESX (i) server or a vCenter?

  ____________

  Blog: LucD notes

  Twitter: lucd22

• My Hp 8600 more custom print or scan more from glass

  I have a HP 8600 Office pro jet which works OK, but suddenly it I cannot print or scan by placing a document on the glass.  I can print from my computer, but not directly from the printer.  I get an error message telling me to ' reload original in the ADF and try again "or an other error message telling me the ADF is blocked.  As I'm not using the ADF, it is meaningless.

  I tried to turn off the printer, disconnect, leaving for 5 minutes and try again, but this is not enough.

  Very frustrated because I need to analyze urgently!

  Maybe there is something in the adf file that triggered the detector? Try to lift the scanner see if there is a piece of paper or something stuck in there to open.

• Will new motherboard take new windows

  Hi just a quick question, can someone tell me if I need to reinstall windows on my hard drive again {windows vista family 32-bit premium updated} as my motherboard is dead and I would like to replace it with a new {old motherboard asus M2N 677 mhz ram 2 gig/new motherboard asus m4a77t am3 with 2 gigabytes of ram 1333 mhz will be the need for a new copy of windows or I can use the} to level just by reinstalling on top too did I lose my games on the hard drive by doing this, as I have on 160gig hard disk games

  In the case of a most important hardware swap like this, a relocation is always recommended.  Any other course of action can leave orphans behind, drivers not load the necessary drivers and cause system instability.

  "acetwenty" wrote in the new message: * e-mail address is removed from the privacy... *

  Hi just a quick question, can someone tell me if I need to reinstall windows on my hard drive again {windows vista family 32-bit premium updated} as my motherboard is dead and I would like to replace it with a new {old motherboard asus M2N 677 mhz ram 2 gig/new motherboard asus m4a77t am3 with 2 gigabytes of ram 1333 mhz will be the need for a new copy of windows or I can use the} to level just by reinstalling on top too did I lose my games on the hard drive by doing this, as I have on 160gig hard disk games

• Problem with NVidia GeForce 650GTX installation/update of drivers

  I bought a VR Deepoon E2 helmet last week. Installed according to the instructions. Home screen don't watch in headset for installation appears to succeed. Tried to use it with the Steam VR DCS World Flight Sim game (which he has been quoted as being able to do), but nothing in the helmet. Disconnected leaves VR on PC and Steam steam. Headset is back to a blue room screen smoky (immersion 3D yet) with a message to reset the headset by pressing the A button on the device to hand.  While software Deepoon software Oculus Rift DK2, he was of course, using the Deepoon E2-based does not come with the hand units as the Rift of Oculus, so I could not use any button.

  Active Web. Uninstalled and reinstalled as recommended (possibly 5 times). Always comes down on a blue color screen with the Message "A switch". Web checked and found Deepoon Assistant Software. This allowed me to spend DK1 DK2 and Deepoon, but any helmet showed was now a big Red Letter D on a gray background.

  Checked the web once again, and he says that the only way was to uninstall a remove all traces of the Oculus and Deepoon from my PC, including my registry. I did it with great care, but think I may have missed and remove some registry keys which makes reference to my NVidia GeForce graphics card 650 GTX which could have are embedded in the Oculus/Deepoon records.  Now given up trying to get this working VR helmet (he had other problems as well as glitch shaped growing on the right lens and not perfectly update) and I'll send the item back for a full refund on EBay.

  Having provided the measures so far, my current status is now worse.  I can't use my graphics card. In Device Manager, it shows an exclamation point, and the games that worked before will not now due to the "lack of DX11 compatible hardware. I tried the update drivers and then downloading the driver from Nvidia for my graphics card, and in both cases, the drivers will not install because there is no recognized the installed card. I tried uninstalling the driver and graphic card and then search for the new hardware in Device Manager. He finds that the GTX 650 but used to always install the driver concerned. I even thought of removing the card graphic, commissioning, remove all references from Nvidia in the registry, close, put my card back in and go upward as if it were to find the map for the first time, but I'm now concerned I will be myself deeper bury.

  If someone could help me please with what I'm doing now, because I'm at a loss and without my games I'm even more depressed. I am running out of ideas and short to the shop that will probably charge me a fortune for a simple registry repair my computer, I don't know what else to do. I have a last file 'dxdiag' that if someone can help I can send it in by e-mail if you need for further investigation. It's my last option.

  Hello

  To get a better idea of your request, please provide us with the following information:

  • The version of the driver installed
  • The version of the driver you want to install
  • Device status (provide a screenshot)

  I'll keep an eye out for your answer

• Cannot install HP PhotoSmart 3210 on 8.1, 64-bit Windows. You want to start.

  Goal: Printer install HP Photosmart 3210, FUll CV utility (Solution Center, Photo Creations, etc.) on a new DELL system running Windows 8.1, 64-bit.

  Hardware configuration: The HP 3210 is connected by Ethernet to Western Digital My Net N750 router.  Two computers are connected to the same router: a race of all-in-one DELL 8.1 of Windows with all updates installed (this is the system I am trying to install the HP software on) and an Apple iMac, I need only basic printing capability.  Both computers are temporarily connected via WiFi; This will be changed to Ethernet at a later date.  The router using DHCP to assign IP addresses to devices, including printer.  I can ping the printer from two computers.  I can set up the HP embedded web server on both computers.  The iMac can print and scan from the printer.

  Short story: I tried several times to install the printer drivers and the HP utility software on Windows 8.1 System.  At one point, I installed the drivers, but not able to install the utilities.  When I finally got the utilities installed, they did not see the printer.  At the present time, even the notebook can not see the printer.  The mistakes that I've seen are:
  -"The system cannot find the file specified."  (the name of the file contained the string ice_suffix.  "I believe that this failure was due to the presence of McAfee Security software, using msconfig more later disabled.)
  -BSOD BAD_POOL_ERROR
  -No network detected (from HP Install Wizard) device
  "This app prevents you to restart" (the title of the app was "HP all-in-one series")
  I tried the wizard install the HP add a tool of the device, the print and Scan doctor and several other things.  I did a level 4 uninstall as described below, which has encountered an error in an early phase, but continued after I clicked "OK".  I installed the latest version of Flash.  The System File Checker has been run when the system was first installed on May 29 and found no problem.  I temporarily wired the printer directly on the Windows system via USB (and then put it back on the router).  I have reset the printer by removing the power for a minute, etc, etc.

  At this point, I would like to clean the system as much as possible and try again from scratch, using the installation wizard.  Based on my experience so far and a careful reading of the many positions installation - problems on this forum, I created a checklist of proposed to achieve this.

  My request on the forum: Please see the checklist.  I won't go forward until it has been approved as being complete and accurate.  Missing something?  Nothing is unnecessary?  The order should be changed?

  NOTE: Step 6 assume that you have already tried to install the software and therefore to have a copy of the uninstaller on the system utilities.  In my case it is true.

  1 connect the printer to the router via Ethernet.  (This is my current setup).
  2 turn on the printer.  Unplug the power cable from the back of the printer.  Wait at least one minute.  Reconnect the power cable.  Wait for the printer to initialize.
  3. do a "clean boot": (now RMB) do a right-click on the icon of window in the lower left of the screen.  Select 'run '.  Enter "msconfig".  Click on 'OK '.  In the Services tab, check "hide all Microsoft Services".  Click on "disable all".  In the Startup tab, click on "Open Task Manager".  On the start of the Task Manager tab, click the top entry and then click "disable".  Repeat for each entry in the list.  Verify that the status column now contains "Disabled" for each entry.  Click on the 'X' at the top right of the window to close the Task Manager.  In the System Configuration window, click 'OK '.
  4. RESTART the system to perform a start without the Services and start disabled.
  5. connect to an administrator ID.  This must be the ID used previously to try to install the software.
  6 do an uninstall of level 4: RMB on the icon of the window in the lower left corner of the screen.  Select 'run '.  Enter '%Temp% '.  Click on 'OK '.  In the resulting display folder (supposed to be in C:/Users / 'ID' / AppData/Local/Temp, where 'ID' is your user ID) enter "Uninstall_L4" in the search box at top right of the screen.  This should find 'Uninstall_L4.bat' (supposed to be in C:/Users / 'ID' / AppData/Local/Temp/7zS0 * / util/ccc).  Click (or double-click if your system is configured to require that).  [NOTE: several forum posts say to use L4uninstall.exe, but this file is not anywhere in the Temp folder on my system.]
  7 meet the need of all the prompts that appear.  A final prompt will tell you that a restart is required.  If two windows appear at the same time, both with "Restart" buttons on them, click the button in the larger window.  [Note from experience: when I click on restart in the small window, WIndows complained that he could not start because the larger window was always active.]
  8. once the system restarted, RMB-the icon of the window > run--> msiexec /unreg-> OK, then run RMB window icon->-> msiexec/regserver-> OK.
  9. check that the uninstall and complete if necessary:
  Look in C:/Program Files (x 86) for HP records; If found, delete them.
  Look in C:/Program Data HP records; If found, delete them.
  RMB-> the icon of the window run-> % Temp %-> OK.  Delete all files in the folder that results.  [NOTE that it prevents to run uninstall again until installation has been completed, since it is where are the uninstall files.]
  RMB-> Panel window icon-> devices and printers.  If the HP 3200 Series is broadcast, RMB-> remove the instrument.
  RMB icon window-> Control Panel-> system-> device-> tab Manager display-> show hidden devices.  Expand "Printing queues" (click the triangle).  When a HP 3200 queue exists, RMB on it and click on uninstall.  Expand "Printers" and do the same thing.
  RMB-> run-> regedit window icon-> OK. Scroll to the top of the list.  Click on 'Computer' to establish a starting point.  Edit-> Find... check the box "Keys", uncheck the 'Values', 'Data' and "Match whole string only" boxes.  In the "Search" box enter "HP." (including interval)-> then find.  [NOPE, that is not all HP keys and found a few that seem not to be HP (for example SOAHP. (DLL). a search for "HP" finds lots of unrelated keys.  Is a good way to clean the registry if level 4 uninstall it did not?]  Use F3 to search for subsequent entries.  For those who are clearly HP related [How can I be sure?], RMB on the key, and select 'delete '.  [Yes, it's dangerous and without greater clarity I won't actually, but I don't like leaving orphans key autour.]
  10. run Disk Cleanup.  Click the window to access a screen start or Apps.  Type "Disk Cleanup".  Click on "free disk space by deleting unnecessary files.  Check the desired boxes.  Click OK.  Wait for the course to complete.
  11 RESTART the system.
  12 install the HP software.  Pointing a browser on http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe to download the wizard, then run the downloaded file.  On the first prompt screen, click "install".  When you are prompted, select custom installation.  "Uncheck the box 'Unique consumables HP', 'scheme Customer Participation', and ' bing for HP bar '.  When you are prompted for the update preference, select "Ask before updating" [my wife, nonnegotiable preference] remove useful tips and suggestions.  Click on 'Next' as required.  When you are prompted, select the Ethernet connection.  The printer must be discovered.  [On one attempt, at this point, that I received the message "the requested service is not found".  Of course, there is that HP Services listed in msconfig, but in order to get that much, I had turned off them ("clean boot").  This seems to be a catch-22 situation, unless these services should have automatically started earlier in the installation process.]
  13 RESTART.  This is necessary at the end of the installation process.  ["Clean boot" conditions hold back at this point?  If so, I'll have to restore the Services and Startup items later and antother restart.  [When is is safe to do so, that is how do you know that the installation of HP is really over?]

  Again, the purpose of this post is to validate the above list.  Your informed comments will be appreciated.

  Hello

  Please try to uninstall the software by following the Uninstall_L4 utility (as stated in your previous post)

  Then, follow the steps below and reinstall the HP software again:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Life cycle of an Application of automatic start

  Y at - it a document on the life cycle of an application to auto-start.  Huge things, I managed to understand are:

  1 even if I have a trademark application like auto start, I should give the user a way to exist, enforcement, if I phone/disable the power demand will not restart... it should run when occurs the powerdown.

  2. when a request for AutoStart runs during shutdown is not really out, it's just dormant and picks up right where it left off on the power.

  3. the application if it has a TimerTask (say every minute) even operation when power off of these tasks keep piling up, when I turn on, once again, I get a bunch of tasks that occurred during power off (granted I can stop stains on poweroff, but how these tasks stack if the application is not running?)

  compromise soft power (and automatic disconnection) leaves some things up and running in the appliance. It is, for example, how the awakening is able to wake you up in the morning.
  for reoccuring timertasks, this means that you must cancel and reset their start

• Problem of sync of folder offline EMC VNX 5300 and Window7

  We have an EMC VNX 5300 and we use it as our NAS storage. Everything works ok we seem to be problems with folders offline synchronization of files ok but when we delete the file in the folder it seems to remove it, but in fact it leaves orphaned. Someone has seen this. Help!

  Hello

  I suggest you to contact the team of EMC support for assistance. They should be able to help you.

  See the link.

  https://community.EMC.com/welcome

• CTRL - (CTRL-less) shows a small Volume control", which I can't get rid of without re-booting

  I just installed Windows on my i7 PC wife 8.1 after replacing his C: with a beautiful Samsung SSD quick.

  This is a configuration of dual display head high (1 widescreen, a former 19 '') with an installed software nVidia nVidia graphics card.

  We found if press us CTRL-minus (not on the keyboard, but in the top row), a "volume" control appears on the hand of the screen, which overlays everything, even full-screen games.

  He refuses to go away.

  Click and drag the control will lower the control, but he then returned to full volume.

  If I hold down CTRL-minus (until I guess keyboard Auto sets in), it will disappear, but as soon as I let go of CTRL-minus, he returns.

  I have found no way to do away with, short of re-start. Even a disconnection leaves visible.

  I am at a loss and seeks advice on how to make it go far if bring us up, or, better still, seems not at all.

  Yours if fine.

  ... Lyall

  SOLVED.

  USB headset.

  Just touch volume on the headphone cable controls USB was enough to trigger to falter after a second or two.

• Impossible to download the App Builder .ipa files

  Hello

  When I want to download the development of the App Builder .ipa file, I get this error message (see screenshot):

  in English: "cannot sign the application, verify that the certificates are valid and try again...". »

  My certificates are quite valid, I don't have any message of error at each step, I have two certificates ready p12, explicit AppID and 2 mobileprovision file.

  I've renamed ony with all lower and uppercase, without space, put items to update several times... but there is always this error message.

  I am Member creative cloud, so I also tried a disconnect, leave Indesign, and then opening again, connect via Folio Builder, then choose "create an application" (with the App closed Builder). Did not work.

  What should I do? Help, please.

  

  Solution found!

  I checked (in the folder of the application generated in the Library/Preferences/com.adobe.ViewerBuilder/Local store and realized that file .folio names still used the old article names (= with characters prohibited such as spaces and e).)

  I've renamed them in InDesign (as explained here http://helpx.adobe.com/digital-publishing-suite/kb/download-sign-failed.html ), but apparently the update of the name is not taken into account on the names of the files .folio.

  -Online the only solution is to REMOVE each article (that forbade the characters), then create it again with a good name (no space, without the e). And then left with the app creation process. In this way, the .folio files are correct and I could download the .ipa file.

• Batch deletion

  I thought it was probably a newb question, but I have not been able to find exactly this topic elsewhere on the forum. I'm trying to recreate an existing HR HTML Help system. We do not have the source files, so I'm importing HTML pages. I'm able to import pages in a batch, but once they are in the Active Directory of Project/project file manager directory, I see know average in this UI element tree to remove several files.

  I tried using CTRL or SHIFT and selecting files muliple, that does not work. I see that you can open the directory in Explorer, but they are not organized the same way. My concern is that even if I delete the file in this way, it will leave orphaned files and create a mess in the directory. Similarly, my other question is if when you delete a topic of project in the UI of HR files, it also remove automatically files associated, such as graphics?

  Thanks in advance.

  Douglas

  Hi Douglas

  Try to select and delete using the pod of the list of topics (view > pods > list of topics).

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• When I leave my MSN messeger and then my hotmail signing, it is said that hotmail is not disconnected

  Original title: my hotmail don't signout

  When I leave my MSN messeger and then my hotmail by disconnection

  It is said that hotmail is not disconnected. My browser and cookies have

  been cleared. I also changed my password. Anything else or is

  someone hacking my account?

  Is this a new scam hack and Hotmail is not safe now I will lose my account?

  Hello Kopalfruits,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• orphaned files in a saved Briefcase

  How can I update the orphaned files in the Briefcase of vista on my laptop hard drive? I need to keep these files because they are all my photos. Am running vista & not tech talk savvy. My drinking drive is a usb kensington with ceedo on it. Thank you

  Hello

  If the files are actually orphans that the only hope to recover would be to make some sort of data recovery using 3 third party software.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  There is a Microsoft article that treats the orphaned files and that you can do to attempt to recover: http://technet.microsoft.com/en-us/library/bb457122.aspx

  I suggest you consult a service of recovery of the aid.

• NO ARROW BROWSER BACK TO BACK TO LEAVE AFTER THE APPLICATION OF DISCONNECTION

  Good afternoon
  
  I developed a small application and the need to know how to avoid or define who does not go to the previous page or go back into the browser (* <-*), after leaving the application by disconnecting?
  
  
  I appreciate your attention and collaboration in
  Good afternoon...
  
  REYNEL Salazar Martinez
  Colombia.

  Hello Rey - Sal,

  This forum is dedicated for the beta of Oracle Database 11 g XE. Although the APEX is included in this version of the database and people here might be interested in helping you, I guess you will get the best help in the forum dedicated to APEX and suggest you post your question once again it: {forum: id = 137}

  -Udo

  Published by: Udo on 27.04.2011 00:57

  PS: I assume that this question has been answered here before. You can also try to search the APEX forum before posting it.

• Why my iPhone 5s will leave no disconnect myself from my iCloud?

  I am trying to disconnect from my iCloud, so I can slide my phone for another person can use it. at the very least, I need to turn off "Find my iPhone" yet but requires iCloud password. When I put the password, which does not app store, I get an error message. "Check failed - there was an error connecting to iCloud."

  Has anyone faced the same problem before? Or know how to solve the problem?

  Thank you

  See if that helps - check failed.