Burn a BluRay FCPX disorders

Similar Questions

• I use Encore CS6. When I try to burn a BluRay disc I get the error: "" code: 3, create sequence stc cannot write file M2S "." This error is only when in the project are more then a (menu or chapter or timeline)

  How can I fix this error?

  This error is probably from multiple sources and it has no uniform solution reported. It can be drive or media. It can be permissions. A reinstall of the still has set at least a situation. Reduce the size of the bitrate/project can avoid the error. Make sure that you still run 'as administrator'.

  (If you get this when you try to burn a disc, test the workflow to the point of actually burning a disc by one) construction of an image and b) burning with another software like ImgBurn to Toast for Mac or PC.

• Burning BluRay DVD on Mac

  I just installed PRE 9.0.  Is it possible to burn a BluRay DVD on a DVD-R with PRE 9 media?  In other words, you can record AVCHD with PRE 9 discs?  It would be a plus to have rather than investing in a BD burner.  Apparently, Toast 10 can do that.

  > burn a BluRay DVD on a DVD-R media

  The specification of the DVD does not HiDef - link for DVD Demystified FAQ http://forums.adobe.com/thread/544206?tstart=0

  I think you MIGHT be able to create a SHORT video BluRay that you write to a folder on your hard disk, and then write this file on a DVD... but you will not be able to play the DVD in a DVD connected to a TV player, you will need a Blu - Ray since a DVD player player can't play HiDef material

• Receiving the message 'Fatal Error' when you try to burn BluRay

  I've completed a project of BluRay and I am trying to burn on a DVD.  The process fine until it starts the burn process.  The project is about 19g and I am ttrying to burn to a 25g BD - R bluray.  It takes about 6 hours to go through the process.  When the progress meter displays 100%, it goes into the process of engraving and after a few minutes, I get the message "Fatal Error" and it is she, not other messages and nothing written for the bluray.  I find myself clicking on the "cancel" button which takes back me to the project.

  Execution of the Elements 7.0 on Windows 7 with a lot of horses.  Can give specifications if anyone thinks that this could be the problem.  Is there a way to burn the HD project to the computer and then use other software to burn on my burner internal Bluray?

  Use sharing/Personal Computer / MPEG with the 1440 x 1080 preset.

  It should load right in DVD Architect Studio and give you great results!

• BluRay burners and still

  I'm install again today as well to buy a BluRay burner this week.

  Obviously I need a burner external Bluray that I can connect to my computer... but... there there who still works best with?

  I called Frys Electronics, they have a $ 99 LG burner and burner Lacie $300 +. Are there any that are more recommended?

  In addition, BluRay burners, by default, also burn DVDs?  Alternatively, burn DVDs with DVDs and BluRays a burner with a BR burner? I know that DVD burners do not burn BRs.

  Well we have not yet brought one of our Blu - ray burners, but they should be able to burn hundreds before a mechanical failure.

• Why my dvd player does not play DVD blueray?

  my laptop has a dvd player and it does not recognize the movie blue ray discs!

  Hello

  Which laptop model is it and is it a blu - ray player / dvd combo burner or BluRay burner?

  If it's just a dvd player, it will not read blu ray read only to burn dvd

  Concerning

  GT4U

• ACER Aspire R13 set up as an office

  I just bought an ACER ASpire R13 at costco and I try to use as my office too.  I wanted to know what kind of equipment is recommended to do this, docking station, additional external hard drive, etc. and tips/advice on the implementation.

  I'd start withMediasonic docking station, external keyboard, mouse/trackball. Burner DVD BluRay USB, GB external drive for backup, two monitors 24 "and a line wired gigabit. That's what I have.

• I had meine Menuedateien auf einem Rechner in einer Partition 'F' Mein Neuer Videorechner hat keine Partition 'F', Die approximately Datensicherung the alten Rechners habe ich nun auf einer Partition "O". Yet haben aber immer nach der "F". Was kann I

  I had meine Menuedateien auf einem Rechner in einer Partition 'F'

  Mein Neuer Videorechner hat keine Partition 'F',

  Die approximately Datensicherung the alten Rechners habe ich nun auf einer Partition "O".

  Yet haben aber immer nach der "F".

  Ich kann Tun was um die Zuweisung neu zu compete?

  He said: "insert disc in F? You have a DVD burner or bluray that F?

• Slideshow of construction in still

  Now, I've lost more than a week trying to build a slideshow in yet. This is a bonus feature for a documentary that I do. The slideshow works fine in the preview. The first time I went to build a Bluray disk image I got the error message "software which is used to decode the media is not available on this system. Installation of the correct decoders for files you are using can help fix the problem'.»

  I went online to investigate the problem and found that many of my photos were bigger than 14.9 megs and had longer dimensions beyond 4000 pixels. So I resized all my images - now the largest size is 1920 and the biggest folder is located around 4 megs. I have rebuilt a slideshow with only 20 slides, thrown into a music (20 meg file), related to my menu extras and fortunately serious an image where I successfully burned a bluray that works very well, thank you.

  Encouraged by this success, I added another 20 slides and tried again. This time, I got the equivalent of the blue screen of death - this frustrating message ""the software that is used to decode the media ... blah blah blah "appeared again." I carefully considered my slides and found I had added two, whose dimensions exceeded the limits of slideshows still. I removed the and tried to burn the image with a slideshow of 38 slide - yup - you guessed it got back this message.

  So I removed another 18 slides - took it back to the size, it was (and with the same 20 slides in exactly the same order) and tried again - «The software that is used to decode the media... blah blah blah.» So I recorded the project--rebooted the computer and tried again - with exactly the same result. I'm about to slash my wrists or immolate the computer. Can someone help me please!

  Stan - I don't know how to clear the cache...

  

  You can also access the location of the cache and delete files directly. Clean removes files only are not in use in the projects. It is risky to directly delete files if you choose the wrong files and remove assets. Ignore the red arrow in the following picture; the relevant bit here is the location of the folder that you use.

  

• Order this bomb at the end of the month!

  After weeks of planing, research and negotiation with my systems integrator, here's what I'll do (a few things to consider always). I get it through rental company, so I'm maximizing my components as much as possible, while remaining in the field of mental health. Example, SSD would have been nice... but... hehe!  Its a rigging not only for PremierePro, but also for After Effects, Photoshop and 3ds Max (where the Quadro and not the GTX).

  -Case: Lian-Li PC-A77F (to get as many disks as possible with adequate cooling) - Alternative Antec twelve hundred V3

  - Always looking for cages non-hotswap 4 x 3.5 "to 3 x 5.25" (or better), frame only for better air circulation. Suggestions?

  -Power supply: Corsair Professional Series Gold AX1200

  -Motherboard: Asus Rampage Extreme III (better control for overclocking)

  -CPU: Intel i7 990 x (O.C. to 4.2 GHz or his speed/stability sweet-spot), with Antec Kuhler H2O 920

  -RAM: 24 GB, Dominator GT 2000 MHz C9 (2x12GB kit) and Airflow Fan II

  -System disk: 300 GB SATA3 Raptor

  -Disc: 2 x150 GB SATA2 Raptor (on the mobo, JBOD or RAID0, for zero, swap file, cache)

  -Disk: 12 x Hitachi sister 7 k 3000 SATA3 cache 64 MB 1.5 GB (RAID3 or 5, will run benchmarks to see what works best with this configuration)

  -RAID card: Areca ARC-1880ix-12, 4 GB of cache

  -Optical drives: burner Liteon Bluray IHSB112and Liteon IHAS124 DVD burner

  -GPU: PNY Quadro 5000

  E/s video: Blackmagic Design Decklink Extreme 3D

  -Monitor: NEC PA271W-BK-SV (27 "with calibrator IPS)

  -Adobe Production Premium (50% for FCP users... big time!)

  -The mouse and the keyboard: Logitech G500 and Logitech Illuminated Keyboard

  Any thoughts, observations and warnings before I officially order?

  Thank you

  Lian Li disc several cages, 3-2 and 4-3 with large fans. I always have several lying around.

  A suggestion, upgraded the 1880 the 16 or 24 ports version. Using two optical drives, you can easily adapt 19 records in this chassis.

  I am looking forward to receive your test results. You should be able to achieve a top-grade or very close to him... Great system. Really great.

• Can I burn an AVCHD Disc in fcpX with a bluray burner

  I'm having trouble sharing a 3 or 24 minutes of video on a BluRay disc and then insert a DVD-R in the bluray burner to burn an AVCHD Disc. fcpX shot of it and said "of the media in the drive cannot be used. " Please insert another disc. ». And Cancel burning is the only option.

  I deleted all the files of rendering and a new rendering, rebooted etc.. I think remember me burning AVCHD discs directly from fcpX before, maybe a year ago. Are updates screwed up, or we cannot burn AVCHD discs in fcpx?

  Then, with TOAST 10.0.09, when I create a master file as. FcpX h264 and then import to TOAST and burn BluRay disc with a DVD-R in it, TOAST now move to it also, saying there is a problem with the source material, 18771 error.

  Fortunately the bluray discs are much cheaper now, right now for purposes of test/video editing, I have to go to the full monty and burn a disc bluray each time to avoid the relentless crash in the process.

  FcpX has an innate ability to make AVCHD discs?

  Chris

  The Druid wrote:

  FcpX has an innate ability to make AVCHD discs?

  Chris

  Yes. But the PCF expects the output of a reader optics red laser (DVD writer), not a blue laser drive. Try using a regular DVD burner for AVCHD.

  Russ

• can I burn bluray with my laptop?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I have a windows vista home basic 32-bit laptop with a dvd burner can I burn bluray discs or do I need to get a new drive or even worse, a new laptop, I would be really grateful for the help

  You cannot burn Blu - Ray discs with a DVD burner. You will need to get an external Blu - ray drive, get a shop to buy a laptop with a blu - ray player or put a new Blu - ray player on your laptop.

• Functions of burning Bluray is possible in Windows 7 Home Premium

  Error message: "There was a problem burning this disc - the disc was not burned successfully. Make sure you have the latest firmware for your CD/DVD burner installed and then try again"

  I'm using (2) readers of DVD bluray LG BH14NS40 in the Windows 7 Home Premium environment.

  1.) my bluray LG BH14NS40 Will perform ANY engraving using Windows Explorer? Yes or no? Please explain.

  2.) while using my BH14NS40 LG bluray DVD drives in Windows 7 Home Premium environment, do I need to buy a bluray of third-party software to perform ALL my burning burning?

  It's too bad Microsoft couldn't this beast on the nail head & give us this feature bluray/burning within Windows itself.

  Lexx Luthor

  Smallville

  Well, that's great - it works, it works! I set AutoPlay to say 9 Power2Go of Cyberlink to start when a blank CD or DVD disc is in the tray & it works like a charm. In fact, I burned my first session successfully using my bluray on a blank CD - R disc player. Burned in a series of songs on the CD with no other problems. Spread the word. Laughing out loud! Be well & thank you for all your help.

  Visit this link to get your free copy of the bluray burning software. I said that it was free, right? Free is good. ;-)

  http://www.CyberLink.com/stat/product/Power2Go/ENU/9/essential/essential-static.jsp

  Lexx Luthor

  Smallville

• Picture of problematic Bluray disc burned with disk utility

  Hi all:

  I export out of first two sequences: one is a 11 minute video that I exported a Bluray 1080 pm 23.976 h.264. The other is a sequence of 2 hours that I exported with h.264 Bluray 720 p 23.976. I has .m4v and WAV in again and made a basic menu, related all this and built a Bluray disk image. It was released as a 9 GB .iso. I then brought in disk utility which I burned on a Bluray disc on my mac pro book using an external Bluray drive via the USB port. I used the front disc to burn a blu ray and it worked fine. But this time when I go to play the disc after burning (using the same USB) DVD (mac OS app) says "disc not available".

  I tried several times with different long projects and I get the same questions.

  Any thoughts?

  Johnny

  My 'mac os support for playback of bluray' google suggests that the standard player mac does not support playback of bluray. I'd love to learn otherwise.

• How eval without burning bluray disc image

  How eval bluray disc image witout burning?

  Not all players will launch a file, and some that will not evaluate the navigation correctly.

  I use Total Media Theater 5. Here, you "open disk file. VLC player works too: in windows Explorer, I find the name of a folder on drive BD (for example "BD project 5" and inside that is two folders - "BDMV" and 'Certificate'), do a right click and «read with VLC»