C5180 not start. Keeps restarting.
Try to correct the fault on my other C5180. Turn on the screen shows a white bar crossong the screen. It stops and the power light blinks 15 times, then restarts. There is very minimal sound machanical, I placed print head to the left as to the right, but there is no movement. To observe any possible action, I lifted the lid, after about 10 minutes the two that the fault light and On / Off light flashed continuously on the screen appears C2FE0231. Then I had to cut the power supply. The printer is beyond hope, I want to give to my daughter.
Hi fuzzywiz0,
I'm glad to hear that you got a solution to your problem. Have a wonderful day.
Tags: HP Printers
Similar Questions
-
a necessary component of windows media does not start Please restart windows media
When I try to read 'My Favorites' in Windows Media, I always get the box that says I have not implemented yet and I'd like to, I'm going through so pick up options I want to choose Save then I get the error mssg that says "a necessary component of windows media does not load please close and restart Media Center. When I tried to find out which component was missing I got mssg that "Windows Media center is not available for this version of Windows" Whats up with all this?
When I try to read 'My Favorites' in Windows Media, I always get the box that says I have not implemented yet and I'd like to, I'm going through so pick up options I want to choose Save then I get the error mssg that says "a necessary component of windows media does not load please close and restart Media Center. When I tried to find out which component was missing I got mssg that "Windows Media center is not available for this version of Windows" Whats up with all this?
1] start the system as an administrator .
[2] make sure that Media Center is closed.
[3] open the command prompt and type in the following commands it. Each time, press ENTER after the command.
regsvr32 jscript.dll
regsvr32 vbscript.dll
regsvr32 wmp.dll
4] reboot the machine.5] restart the Media Center.
-
as above
Hi graham50,
I suggest you to go to the link below and perform a startup repair and do a system restore and that might take care of the issue.
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
Go to the link below for the procedure perform system restore.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Concerning
Varun j: MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Equium A60 keeps restarting after installation of the graphics driver ATI
I have installed the Toshiba ATI graphic driver, but when I restart the laptop, it does not start, keeps restarting before surposed to go on windows XP. Help, please.
Hello
Try please solve it as described on this Microsoft article http://support.microsoft.com/?kbid=293078
Generally, the display driver installation should help. As you know sometimes it is not easy to fix this kind of problem and sometimes is much better recovery procedure.
You can not write about any common problem if you n t know exactly why this happens. If you are recovering the unit it will be working well. A negative influence on the graphic can have some games preinstalled or many other additional software.
-
Dreamweaver does not start when it is installed on the second disk
Hello
I recently installed Dreamweaver (trial version) on a second drive through creative cloud Manager.
When I clicked on DW in the started program start, but got stuck.
I tried to go in the installed folder and double click on DW, but it's the same thing.
Then I clicked on DW to create Cloud manager and DW loaded without any problems.
So why the program only started compared to the creative clouds?
Platform: Windows 10
Adobe Dreamweaver CC 2015
Thanks in advance for any help.
Thanks for all the help.
I installed Dreamweaver on a second drive to save space on my SSD.
I realized Cloud Creative manager to install on the second hard drive.
After making that Dreamweaver is not started, I restarted my computer, and then everything has worked.
-
Original title: corrupted vista OS?
My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)
Whenever my com has restarted, it shows the following:
Safe mode
Safe mode with networking
Safe mode with command prompt
Last known good configuration (Advanced)
Start Windows normally
All options will be led to the recovery of my com & return the same screen.
It will always get stuck at the loading bar where the com starts boot & restarts itself.
I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well
I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:
Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.
Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)
NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96
Any idea of this situation?
Is it possible to save my cause com have not all backups from my hard drive?
Any help would be grateful.
Thank you
Hi Bill,
I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?"My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).
So the questions are now fixed, unless you put the other disk hard?
Test the other hard drive.
Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.
And run the F12 as I advised you to do so.
It is DELL's Diagnostics software.
Good luck with it.
-
Hello! Recently, I installed Wubiand appreciates well. However, a few days ago, when I tried to boot XP on my netbook (EEE PC 1005hab), it restarts just constantly return to the selection screen of the BONES. I tried Safe Mode and last good Configuration known with anything will do. What should I do now? Ubuntu has not stopped working suddenly, so I can't access my data.
I don't have to have a Windows XP CD, there is something weird Asus recovery instead. In addition, it is a netbook so I don't have an optical drive to run the recovery CD. I'm doing a Livecd of Linux USB so I can back up my data... but I can do but reinstall at this point?
Thank you.
The afflicted system has a working CD/DVD drive (even an external).
You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.
Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again. You have tried them all!
The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.
If this is the case, you must call Options menu advanced boot yourself until you do not see the option:
Disable the automatic restart in the event of system failure
When you get the XP Advanced Options correct start menu, it has options on it like these:
Safe mode
Safe mode with networking
Safe mode with command promptEnable Boot logging
Enable VGA mode
Last good Configuration known (your most recent settings that worked)
Directory Services Restore Mode (Windows domain controllers only)
Debug mode
Disable the automatic restart in the event of system failureStart Windows normally
Reset
Return to OS Choices MenuYou need to choose in this menu is the option:
Disable the automatic restart in the event of system failure
Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.
If you miss the window of opportunity F8, you must try again and start pressing the F8 key with more urgency (earlier and more frequently) until you see disable automatic restarts on system failure, and then select it.
You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.
Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Windows Vista Home Basic Edition keeps looping and will not start
Windows Vista Home Basic Edition will not boot to the Welcome screen. It keeps restarting loop. I tried to go into safe mode, but who does not start too. Loops of safe mode and return to the start screen.
I have a dell laptop and I just restalled operating system. I had Windows Update set to automatically download and install. PC worked great until the next day (after the time programmed for automatic updates). I'm assuming that the started after some windows updates when installed. Unfortunately, I can not enter in Windows or Normal or Safe Mode.
Bill
If safe mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dell recovery options:
Above is Dell to reinstall Vista from the DVD on your computer.
And that way if you have a recovery partition on your hard drive.
See you soon
Mick Murphy - Microsoft partner
-
I try to add files to WMC, but when I do a box arrives with "a necessary component of the WMC did not start successfully. Restart WMC"I did this several times, but the same message keeps coming back. Can anyone help?
I think that your account has administrative privileges.
You can create another user with administrator privileges and then recheck the problem there. -
Firefox does not start after the computer restarts
Install Firefox, works great. Restart the computer, Firefox does not start, or finally when it tries to start the script errors occur. If I reinstall Firefox after restart of a computer, it works fine, once again when the computer is stopped at the next startup it is, will not be able to use Firefox. Firefox does not start in Firefox Safe mode, does not start in windows safe mode. Do not add now, nothing has been added, just the Firefox installer played complete the system restore on the computer, same problem. Windows 7 Pro. Remove Firefox from windows control panel, restart your computer, install firefox, will take place. shut down the computer, put on the computer, firefox does not start, or crashes. I am exploring now Web interface.
I reinstalled Firefox, so it will run in order to perform the steps below.
Here is the answer which took care of the problem,
"Site Web TrueSuite Log On" plugin (AuthenTec), is the question.
-
Win7 Pro. has worked ok firefox. but lately with 25 and 26 now, firefox does not start. I see that firefox is running in the Task Manager. but it will not just appear.
If I still download and install it, it runs, but every time I restarted the system, it just does not work yet.
Reset try:, safe mode, uninstall & reinstall, new/clean profile none of these work.
-
Both browsers (Firefox 21 & IE) installed on my Widows XP 64-bit office refuse to start or click the icon on the desktop, the start menu bar or the executable files themselves. What happens is that all the icons disappear from the screen for 15-30 seconds, then the icons appear on the screen, and the last information message displayed from the system tray at the beginning upward is repeated.
Firefox deleting and reinstalling will start the browser as the last step, but when the new copy is closed, it will not start. Also just restart the download installation without removing Firefox will be 'Upgrade' and start in last step, but when the new copy is closed, it cannot be restarted. Restore running on the new copy has apparent effect on the ultimate inability to restart after closing.
I've only tried the Internet Explorer browser after being unable to start Firefox (its only usually used by States to update procedure) and have not studied either reinstall or repair.
Did you use programs that I listed? All anti-malware programs to detect different things.
-
Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?
It would be helpful to post what the screen says.
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
https://support.Apple.com/en-us/HT201295
Subject of memory NVRAM and PRAM
https://support.Apple.com/en-us/HT204063
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
https://support.Apple.com/en-us/HT201262
-Start to recovery and repair the startup disk
OS X: on OS X Recovery - Apple Support
https://support.Apple.com/en-us/HT201314
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.Apple.com/en-us/HT204904
-If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.
-
The startup process does not end and the system keeps restarting
From the time my system has been upgraded to El Capitan, I have a problem with the startup of the system. The login screen has horizontal lines. The system does not start properly and begins to restart before completing the startup process. After 10 or 15 attempts, the system starts. Only when the login screen appears without those lines, I know that the system should start. Once it starts, all of a sudden the screen freezes and system crashes too. This happens usually when I try to open a large file, Powerpoint or Adobe Acrobat. Or the screen moves to the right and the screen freezes and I have no choice other than to restart the system.
Service center staff has stated that there is a problem of display driver and updated. But it's always the same problem. What could be the problem and how to solve?
Thank you
Olivier
Download and view a report of Etrecheck;
http://www.etresoft.com/etrecheck
Ciao.
-
Care of my MacPro is lower from a previous post. It does not start, but keep train. I get the rope to music if I stop and start again. Advice please. Thank you very much. Allan
Mac Pro (early 2008) (data sheet)
Mac Pro - model: MacPro3, 1
2 3 GHz Quad - Core Intel Xeon processor: 8 strands
8 GB of RAM expandable
DIMM Riser B/DIMM 1
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM Riser B/DIMM 2
1 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 1
2 GB DDR2 FB - DIMM 800 MHz ok
Riser DIMM A/DIMM 2
2 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 3
1 GB DDR2 FB - DIMM 800 MHz ok
DIMM B/DIMM Riser 4
1 GB DDR2 FB - DIMM 800 MHz ok
Riser A/DIMM DIMMS 3
Vacuum
Riser DIMM A/DIMM 4
Vacuum
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en2: 802.11 a/b/g/n
NVIDIA GeForce 8800 GT - VRAM: 512 MB
HH281 1920 x 1200 @ 60 Hz
DELL3007WFPHC 1600 x 2560
OS X 10.10.2 (14C109) - since the start time: 20:27:26
ST3320820AS_P disk0: (320,07 GB)
EFI (disk0s1)
: 210 MB Disc 1 - system (disk0s2) /: 319,21 GB (17,69 GB free)
HD (disk0s3)
[recovery] recovery: 650 MB WDC WD5000AAKS-41YGA0 disk2: (500,11 GB)
EFI (disk2s1)
: 210 MB System install disks 1 and 2 (disk2s2) / Volumes/installation discs for systems 1 & 2: 16.11 GB (4.40 GB free)
Disc 2 (disk2s3) / Volumes/disk 2: 483,52 (291,34 free go-go)
Hitachi HDS721010DLE630 disk1: (1 TB)
EFI (disk1s1)
: 210 MB 3-1 TB (disk1s2) Dist/Volumes/Dist 3 TB: 999.86 1 GB (328,00 GB free)
Prolific Technology Inc. IEEE-1284 controller.
Hewlett-Packard HP LaserJet P2055dn
Hub keyboard Apple, Inc.
Logitech USB receiver
Apple, Inc. Apple Keyboard
Apple Inc. Bluetooth USB host controller.
EPSON USB printer
Mac App Store and identified developers
You still have OSX 10.5.8?
-Try to reset memory NVRAM/PRAM and SMC
MacIntel: Reset of the controller (SMC) system management
Subject of memory NVRAM and PRAM
-Try to start safe mode
OS x: what is Safe Boot, Safe Mode?
-Start to recovery and repair the startup disk if Lion or higher
OS X: on OS X Recovery - Apple Support
Otherwise start from the installation DVD and keep the boot disk
-If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
Run the Apple hardware test. You will need one of the original installation discs
Using Apple Hardware Test - Apple Support
You may have a bad graphics card. The NVIDIA GeForce 8800 GT - VRAM: 512 MB are prone to failure
Maybe you are looking for
-
Whence the "reloading" and buttons "stop" lights up in FF 4.0 SuSE Linux 11.4?
I'm sick of re-engineering random crap every time I update... How can I get "charge it" / "Refresh" button and the "stop" button back in FF 4.0? I am running SuSE 11.4 32bits. I am not no newbie, but I'm tired to do a kabuki dog dance each new versio
-
not by clicking and dragging the mouse
My mouse pointer responds well to move around the screen and double check etc. However when I try to click and drag he 'loses' of the object (file name or Freecell card) or will not select what I go & drag. All the drivers are up to date. I removed,
-
Printer while a PSC 1510 cannot print
Printer is OK connected; test page is printed, it is not obey a normal order of printing. Message says it is not connected, but there is no problem with the connections! Please help me! Maybe the driver is damaged?
-
Hello I have a PXI-5922 and a PXI-5412. I try to sync the cards using the tclk functions provided. I put the 5412 to receive an external trigger on PFI 0. Then used Tclk in an attempt to start the scanner at the same time. The problem I have is that
-
I tried the "sound on / off" in the game options. The speaker volume is high, but the game has more noise.