cannot burn any cd or dvd

problem I can not burn DVD or cd rw, I get a file error CPP writer line 306 invalid block address I tried to solve this problem of resetting my computer back to factory settings, it did not work please someone help me because I don't know this kind of problem, this happens only when I burn a large amount of files

The burner is probably a failure. Swap it out for a well-known work. If that solves the problem, take the original drive. MS - MVP - Elephant Boy computers - don't panic!

Tags: Windows

Similar Questions

  • Satellite A350-20s cannot burn any cd or dvd

    Hello

    I have a problem with my dvd player. I can't burn a cd or dvd.
    I tried with several blank cd brand and dvd with Nero and I still have the same problem.

    The software crashes without an error message.

    I need your help.

    Thank you.

    Hello

    Are you trying to copy disk protected from copyright?
    Maybe this is not possible due to some restrictions
    If not, you should check to see if an update of the firmware of the player is
    If it is available, then you should find it on the European driver Toshiba page.

    Last but not least if may be a hardware problem, but the ASP must be contacted as a last resort. I mean in the majority of cases, the CDs and DVDs used is responsible for these issues
    I had this problem too and able to solve using another brand I m now with TDK-R discs

  • Carpet * a UJ - 831S: cannot burn a CD or DVD, but possible burning RW media

    Hello
    I have a really strange problem when I burn cd or dvd (any brand) I can't do that, but I can burn a dvd RW or cd RW. When I try to burn normal dvd, his show "Please put a blank or rewritable dvd" and when I try to burn normal cd its burning but sometimes 10% and 90% time.
    his wird becase when I burn cd - rw or dvd - rw (any brand) everythink is ok (still) and I have no problem with reading any cd or dvd.

    I don't know that my dvd is ok or I have to buy a new one?

    Please help me.
    you are my last chance...

    Hello

    Looks like the lens can not calibrate correctly.
    The objective must be calibrated before using the media. Each media need to another status to calibrate. If this calibration doesn t work properly the drive cannot read or write media.
    Well, in this case there are not a lot to do.
    The drive needs to be replaced.

    But have you checked if the engraving option has been enabled on the drive? If this isn't the case, in order to check it out.

    -Right-click on the DVD drive-> properties
    -Go to the menu point record
    -Enable recording for the DVD player

  • Pavilion 6000: cannot burn pictures on a DVD + RW on my hp Pavilion 6000 (drive is hp DVD A DH16A BLH)

    I can not burn pictures on a DVD + RW. I use Verbatim DVD + RW discs. When I try to burn photos, I get the message "Please insert a recordable/writable disc". I can burn photos to a CD, but I want too much DVDs!

    Help, please! I am not technically minded so please keep this in mind when replying

    Across the Atlantic, it seems that way. If you put in a DVD movie is the little icon for the disc switch to reflect the title of the movie? The test would be if you can boot from a bootable DVD as a Windows 7 install disc or any other bootable DVD. We strive to rule out hardware vs software and if the DVD player works before Windows starts so the problem are software and a replacement of the drive will not help. If she can't boot from it, then it's a hardware problem. It is not the upper and lower part thing of filter, you can fix with the automatic setting of Microsoft or it wouldn't work for the CD, either.

    You can also try a disc cleaner for the lens that you can buy at any store that sells a lot of DVD movies.

    So before you buy the replacement, try my suggestion above, if you can. In the contrary case, it sure looks like material.

  • Cannot burn files to CD/DVD more? (Windows 7)

    This problem is everywhere on the internet but I have yet to see a solution that is tailored for someone else to do a system restore that is not an option. I burned the files on my internal drive by dragging and dropping them in the folder to the blank disc, then click on burn. A few months ago I went through the process as usual (insert a blank disc, he asks what I want to do and I choose to burn cd, it opens the folder to the blank disc) but when I went to drag and drop the files in the folder to the blank disc, nothing happened. I dragged and when I released in fall, they do not appear in the burn list.

    (1) I tried to use Windows Media Player instead, and I couldn't also do drag or drop files in the burn list here.
    (2) I tried selecting the files, then click on burn instead of drag, and they still do not appear in the burn list.
    (3) I got our admin check user for burning strategies and burning has been activated. We disabled and then enabled again just in case and still no difference.
    (4) I have not download or install something new on the computer or bring other changes to this computer before what is happening and neither did my admin, there may be something that we did it. The only changes that the computer would be crossed before that happens are automatic updates of windows.
    (5) it is not the disks. It does not work with the same discs I have always used so I tried six different other, different brands, and the behavior is the same only they are all burned fine on other computers. It also does not matter if I am on CD or DVD.
    (6) it is not the drive. When my admin logged into his account on my computer, he was able to drag and drop and burn as usual it seems there is something to do with my profile specifically.
    Any suggestions?

    Hello

    Thanks for posting your question in the Microsoft Community forums.

    The computer is connected to the domain network?

    If the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

    Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

  • Cannot burn CDs or watch DVDs

    Am not able to burn CDs. The media player to rip music, but am not able to burn CDs.  Also unable to watch DVDs

    Hello rcaddy40,

    1. don't you make changes to the computer before it stopped working?

    2. don't you get an error when you try to play DVDs on your computer?

    I suggest that you run by following the below Fix - it. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    If this does not work, I suggest that you follow the steps in the link below:

    http://support.Microsoft.com/kb/314060

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

    Thank you

    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • D/DVD-ROM drive cannot read the CD or DVD

    Hello

    I use Windows Vista on my laptop. Its quite some time that I did not use my DVD/CD drive. Today, I try to use but cannot read any CD or DVD. I was trying to solve the problem of updating the drive, but still cannot fix. Can I use Microsoft FIX IT microsoft support but the problem still there.

    Something to say: windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).

    Click on 'Search the soluton' to send data about this device to Microsoft and to see if there is a solution available.
    I did it but the result is COULD NOT LOAD DRIVER SOFTWARE.

    Please advise what should I do?

    Thank you!

    Hello

    It is very rare for the methods in the 1st answer above does not fix a Code 19.

    You might have a disk problem as the CD/DVD is actually 4 discs in 1 case (CD & DVD and CD burn and)
    DVD playback). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
    that the troubleshooter does not, and those who "could" be the cause.

    Check with your system manufacturer Maker and device for possible firmware updates and the good
    Your player registry entries.

    Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
    other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD-ROM drive settings of
    someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How can I burn and watch a dvd on my windows xp. and what do I do

    I want to know how to burn DVDs, s under windows xp, and I have to be able to do

    To watch DVDs, you need to install a DVD decoder...
    or download, install, and use a media player like VLC.

    Info about DVD decoders: Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

    ===

    If you want to burn video DVDs that will play in a
    DVD Player standalone you need DVD Authoring
    Software.

    The following freeware can be worth a try:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.dvdflick.NET/Download.php
    (the download is: "dvdflick_setup_1.3.0.7.exe")

    Save the file to a folder on your hard drive and
    install from there.

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck.

  • Why is there no option to burn pictures on a dvd in the photo gallery for windows vista

    I try my best to find a way to BURN a DVD of my photos that I had downloaded in windows live photo gallery, or windows photo gallery.
    I even try to find a way to burn pictures on a DVD via windows developer.

    NO LUCK.
    It isn't even an option anywhere to BURN a DVD.
    There are options to post on twitter or facebook, NO I need or can use.
    There is even an option to copy on my computer, I do not need.

    I have a lot of photos that are on windows live, and all I have to do is burn or create a DVD, so I can send it out, but there is simply no option for this?

    I have windows VISTA BASIC.

    "I checked up on top of the windows for the info site, and he mentions to click on the" "burn the dvd icon" ", but IT is there NO SUCH BOTTON of CLICK ON MINE :>>>

    I hope someone could help me with this frustrating problem

    Vista Basic does not include Windows DVD Maker.

    If you want to burn a data DVD, you can use Windows
    Media Player, check the following links:

    Windows Vista - burn a CD or DVD in Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player Burn a CD or DVD in Windows Media Player: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    If you want to burn a video DVD that will play like a movie
    in a free-standing DVD player... you need Authoring DVD
    software.

    First... Create your slideshow video with Windows Movie
    Manufacturer and publish (save) in the. Film WMV format.

    Windows Vista - put on the road with Windows Movie Maker
    http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

    Then you need DVD Authoring software to create video
    DVD... the following freeware can be worth a try:

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    DVD Flick
    http://www.videohelp.com/tools/DVD_Flick
    (the download is: "dvdflick_setup_1.3.0.7.exe")
    (Mirror download (direct link) is the fastest.

    Save the file to your desktop or a folder on your
    hard drive and install from there.

    Be sure to read the Guide:
    http://www.dvdflick.NET/Guide.php

    Tutorials:

    Tutorial DVD Flick
    http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

    Burn any Format video DVD PC
    http://www.freevideoworkshop.com/dvdflicktutorial.htm

    AVI to DVD with DVD Flick Guide
    http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

    To create a video DVD base that should play in a free
    permanent drive DVD... try the following...

    First... read the DVD Flick Guide to familiarize
    with the program.

    Open DVD Flick and insert a blank DVD in your drive.

    If the window of Autorun from your computer... just close it.

    Click the project settings button and check... Video /.
    Target format... residents United States... Choose... NTSC /.
    Accept.

    The title button left click Add and navigate to your
    Video clips and select the ones you want on the DVD.

    You can have by selecting one and then use
    the up and down buttons.

    Left click on the button create DVD / OK / Yes / Yes.

    Please wait while the DVD is created.

    When the text "Completed successfully" is displayed you
    DVD Flick can close. Now you can eject your DVD
    and play in your DVD player.

    At some point you might want to buy more
    Advanced Cyberlink, Nero, Roxio, software
    Ulead, etc... but at least it is a start.

    Good luck.

  • Qosmio G20-127: after firmware update cannot burn CD or DVD

    I'm updating my firmware from F101 F102 to dvd so I can't copy any CD or DVD in my drive also some CD & DVD cannot be played after this update, I tried to
    install the old firmware F101, but I can't so please help me?

    Thanx

    Hello

    How do update you?
    Before update you the firmware, follow this:
    -Always use AC adapter to avoid a power off by updating the F / w.
    -Do not turn on DVD + r / + RW/RAM DRIVE by updating the F / w.
    -Put an end to all applications except the F/W update of the program.
    -Are not completed with force the F/W update program
    -Be sure to manually restart Windows after completing the update.
    -Update program automatically eliminates the ineligible disks

  • I can not burn any DVD or CD - burning interruptions of processes before the end

    Hello world!
    Sorry for my bad English, but I guess you're all updated on the Jesus are not very good in English.
    I have the following problem: I can't burn a cd or dvd. I already tried with different programs such as Sonic, Nero 7.0, I Tunes and every time I have an error that interrupts the burning process before the end.
    So I don't know what to update! I already tried to re install the drivers, but it's didtn can't change anything.
    To help you, I saved a nero error log. I hope it could be useful to someone who could help me!
    Here is the log:
    me

    5 82001080000000000666822849

    Windows XP 5.1
    IA32
    WinAspi: -.
    Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

    NT-SPTI used
    Nero Version: 7.0.0.0
    Recorder: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
    Adapter driver: HA 1
    Drive buffer: 2048kB
    Bus type: default (0)-> ATAPI, detected:?
    CD-ROM: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
    Adapter driver: HA 1

    = Scsi-device-map =.
    DiskPeripheral: FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: on
    CdRomPeripheral: MAST * A DVD-RAM UJ - 841S atapi Port 1 ID 0 DMA: on
    CdRomPeripheral: COACH CD/DVD-ROM 2. 1B axvodka Port 2 ID 0 DMA: Off

    = CDRom-Device-map =.
    CARPET * a DVD-RAM UJ - 841 S D: CDRom0
    COACH CD/DVD-ROM F: CDRom1
    =======================

    AutoRun: 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) bytes
    ShowDrvBufStat: 0
    BUFE: 0
    Physical memory: 2045 MB (2095084kB)
    Free physical memory: 1277 MB (1308144 KB)
    Memory used: 37%
    QUERIES PFiles: 0x0
    Use consultation: 1
    Global Bus type: default (0)
    Control supported media: disabled (0)

    21.9.2006
    CD-ROM (ISO)
    21:04:46 #1 text 0 file Isodoc.cpp, line 6410
    ISO document burn settings
    ------------------------------------------
    Determine maximum speed: FALSE
    Simulate: TRUE
    Write: TRUE
    Finalize the CD: FAKE
    Multisession: TRUE
    Multisession type: Start multisession
    Burning mode: TAO
    Mode : 1
    ISO level: 1 (Max. of 11 = 8 + 3 char)
    Character set: ISO 9660
    Joliet: TRUE
    Allow pathdepth more than 8 directories: TRUE
    Allow more than 255 characters in path: TRUE
    Write ISO9660; 1 file extensions: TRUE

    21:04:47 #2 text 0 file Burncd.cpp, line 3007
    CARPET * A DVD-RAM UJ - 841S
    SmoothLink activated

    21:04:47 #3 text 0 file ThreadedTransfer.cpp, line 525
    ReadBuffer-Pipe got 81920KB of memory

    21:04:47 #4 text 0 file Reader.cpp, line 124
    Player running

    21:04:47 #5 text 0 file Writer.cpp, line 113
    Writer D: MAST * A DVD-RAM UJ - 841S race

    21:04:47 #6 ISO9660GEN-11 file Geniso.cpp, line 3304
    First address writeable = 0 (0x00000000)

    21:04:47 #7 text 0 file Burncd.cpp, line 3301
    Turn on Track-At-Once, using CD-R/RW media

    21:04:48 #8 Text 0 File DlgWaitCD.cpp, line 277
    Last possible write address on media: 359844 (79:59.69)
    Last address to be written: 318786 (70:52.36)

    21:04:48 #9 Text 0 File DlgWaitCD.cpp, line 289
    Write in overburning mode: No. (enabled: CD)

    21:04:48 #10 Text 0 File DlgWaitCD.cpp, line 2568
    Recorder: MAST * a DVD-RAM UJ - 841S

    21:04:48 #11 Text 0 File DlgWaitCD.cpp, line 456
    > Protocol of DlgWaitCD activities:
    =========================================

    21:04:48 #12 text 0 file ThreadedTransferInterface.cpp, line 846
    CIS (after recorder preparation)
    0: TRM_DATA_MODE1)
    2 indices, index0 (150) not provided
    #0 + 318787 (318787) original disc POS = #318787 / 70:50.37
    relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAST * a DVD-RAM UJ - 841S]
    --------------------------------------------------------------

    21:04:48 #13 text 0 file ThreadedTransferInterface.cpp, line 1058
    Prepare recorder [D: MAST * a DVD-RAM UJ - 841S] for write in TAO
    DAO infos:
    ==========
    MCN:
    TOCType: 0x00; Closed disc, session not obsessed
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 653182976, ISRC ""
    Introduction DAO:
    ===========
    __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
    -150 | Lead-in | 0 | 0x41. 0x00
    -150 | 1. 0 | 0x41. 0x00
    0 | 1. 1. 0x41. 0x00
    318787 | Lead-out | 1. 0x41. 0x00

    21:04:48 #14 text file ThreadedTransferInterface.cpp 0, line 1126
    Removed 2 blocks from end of track 1. Length: 318787-> 318785.

    21:04:48 #15 text 0 file SCSIPassThrough.cpp, line 34
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    21:04:48 #16 phase 24 file dlgbrnst.cpp, line 1724
    Caching of files started

    21:04:49 #17 text 0 file Burncd.cpp, line 4129
    Cache writing successful.

    21:04:49 #18 phase 25 file dlgbrnst.cpp, line 1724
    Caching of files completed

    21:04:49 #19 phase 32 file dlgbrnst.cpp, line 1724
    Simulation started at 24 x (3 600 KB/s)

    21:04:49 #20 text 0 file ThreadedTransferInterface.cpp, line 2669
    Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

    21:04:49 #21 text 0 file MMC.cpp, line 21541
    Set BUFE: SmoothLink-> ON

    21:10:08 #22 text 0 file ThreadedTransfer.cpp, line 228
    all writers idle, stopping conversion

    21:10:10 #23 phase 33 file dlgbrnst.cpp, line 1724
    Simulation completed at 24 x (3 600 KB/s)

    21:10:11 #24 phase 36 file dlgbrnst.cpp, line 1724
    Burn process started at 24 x (3 600 KB/s)

    21:10:11 #25 text 0 file ThreadedTransferInterface.cpp, line 2669
    Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

    21:10:11 #26 text 0 file MMC.cpp, line 21541
    Set BUFE: SmoothLink-> ON

    21:12:16 #27 SPTI-1040 file SCSIPassThrough.cpp, line 306
    CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Printing Code: 0x10
    Meaning of Qual: 0x00
    The CDB data: 0x2A 00 00 01 76 00 00 20 00 00 00 C0
    Sense area: 0xF1 00 03 00 01 74 5 0 a 00 13 00 00 10
    Buffer x 03390000: Len x 10000
    0 X 72 F1 E5 87 D3 3D 4A 96 F9 B0 73 83 14 72 A1 D3
    0XF3 49 6 93 44 25 04 6 E5 THIS 44 5F 3RD 79 47 C6
    DD EE 0XDD 3A FD 4 71 D CB F3 4B 18 BD 7 D DF 35 32

    21:12:16 #28 COR-1040 file Writer.cpp, line 302
    Illegal block order size
    D: MAST * A DVD-RAM UJ - 841S

    21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    21:12:17 #30 text 0 file ThreadedTransfer.cpp, line 222
    conversion idle, stopping reader

    21:12:17 #31 CDR - 201 file WriterStatus.cpp, line 200
    Invalid write state
    D: MAST * A DVD-RAM UJ - 841S

    21:12:17 #32 TRANSFER file-18 WriterStatus.cpp, line 200
    Could not perform PlageFin

    21:12:17 #33 text 0 file MMC.cpp, line 16273
    start closing a Session

    21:12:30 #34 SPTI-1040 file SCSIPassThrough.cpp, line 306
    CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Printing Code: 0x10
    Meaning of Qual: 0x00
    CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
    Sense area: 0 x 71 00 03 00 00 00 00 0 to 00 13 00 00 10

    21:12:30 #35 COR-1040 file WriterStatus.cpp, line 249
    Illegal block order size
    D: MAST * A DVD-RAM UJ - 841S

    21:12:30 #36 TRANSFER file-19 WriterStatus.cpp, line 249
    Could not perform fixation

    21:12:30 #37 text 0 file WriterStatus.cpp, line 258
    falling back to disc fixation

    21:12:30 #38 text 0 file MMC.cpp, line 16273
    start closing a Session

    21:12:30 #39 SPTI-1046 file SCSIPassThrough.cpp, line 306
    CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1046)
    Key: 0x05 (KEY_ILLEGAL_REQUEST)
    Printing Code: 0 x 30
    Meaning of Qual: 0x05
    The CDB data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
    Sense area: 0 x 70 00 05 00 00 00 00 00 00 30 05 AA a 0, 00

    21:12:30 WriterStatus.cpp - 1046 file CDR #40, line 249
    Illegal disc
    D: MAST * A DVD-RAM UJ - 841S

    21:12:30 #41 TRANSFER file-19 WriterStatus.cpp, line 249
    Could not perform fixation

    21:12:30 #42 phase 38 file dlgbrnst.cpp, line 1724
    Burn process failed at 24 x (3 600 KB/s)

    Existing drivers:
    File ' Drivers\PXHELP20. SYS: Ver = 2.03.32a, size = 20640 bytes, created 25/04/2005 11:03 (Prassi/Veritas driver for win 2 K)

    Registry keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

    So, thank you!
    Next time!
    Roman

    Hello

    The error log doesn't provide very useful information.
    According to this error log, the simulation was running OK, but the burning process has not been started.
    In such cases, it is very difficult to say why it happens. Maybe the drive is damage and cannot calibrate the lens correctly or using media is not compatible.
    Burning the process depands on the fields and the data that prefer to burn.
    Data, CD, DVDs are encrypted and it s is not possible to burn and copy it.
    In other cases, you can also try to burn media with low speed and not with 24 x.

    But to sentence case you the reader has a malfunction and you need to replace ;(

  • Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc

    Hi all

    I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.

    I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?

    Best regards

    Ribera.

    Hello

    In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
    I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.

    This could be the worst case, because this fault is repairable by replacing the drive.

  • Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

    MODEL: SA80-129
    DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
    SYSTEM: WINXP
    SOFTWARE: NERO

    (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
    (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

    all PROMTLY ANSWER would BE MUCH APPRECIATED.

    It doesn't sound good.
    I had a similar problem of combustion and the end of the story, I replaced the drive ;(
    However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
    Then you could check if it able to burn the DVD s s.
    I think you should also try burning different DVD media.

    I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
    This could be a worst case and in this case, the replacement is necessary.

  • Cannot burn DVDs on my Satellite C660

    I just bought a new complete Satellite C660 and I cannot burn DVDs.

    Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
    When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

    You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

    Have you tried using different media of high quality as TDK or Verbatim?

    Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

  • Satellite P755-S5262 cannot determine if the DVD drive can burn a CD or DVD

    I recently acquired the P755-S5262 and cannot determine if the DVD drive can burn a CD or DVD.

    The description of Toshiba wrote:
    Drive DVD SuperMulti (+/-R double layer) supporting up to 11 formats but I can't imagine that a laptop of this caliber cannot burn a CD/DVD.

    I can't find an answer or a description nowhere else.

    Someone on this site/forum can answer my question?

    Hello

    The CD/DVD drive can burn CDs and DVDs

    I recommend using compatible diskettes... I use TDK and DVD r CD and they are really cool

Maybe you are looking for