Cannot burn DVDs?

Similar Questions

• Satellite A80-129: Mat * a DVD - RAM UJ-830 s cannot burn DVDs

  MODEL: SA80-129
  DVD RAM TYPE MAST * A DVD-RAM UJ-830 S
  SYSTEM: WINXP
  SOFTWARE: NERO

  (1) DVDRAM CAN READ CD AND DVD EASILY, IT Burns CD WELL, BUT cannot burn DVDs, IT SHOWS: G:\ IS NOT ACCESSIBLE INCORRECT FUNCTION, UNTIL IT WORKS WELL. the blank dvd is not a problem, before I used even type a blank dvd to burn.
  (2) even allow the recoding in the properties, the properties shows the Virgin dvd 0bytes.

  all PROMTLY ANSWER would BE MUCH APPRECIATED.

  It doesn't sound good.
  I had a similar problem of combustion and the end of the story, I replaced the drive ;(
  However, try to remove the drive from Device Manager, and then again to restart the operating system should recognize the device again.
  Then you could check if it able to burn the DVD s s.
  I think you should also try burning different DVD media.

  I have visited many work sites and the reader, and especially the calibration lens malfunction could be responsible for burning problems.
  This could be a worst case and in this case, the replacement is necessary.

• Cannot burn DVDs on my Satellite C660

  I just bought a new complete Satellite C660 and I cannot burn DVDs.

  Tried to burn with the recovery media creator, Nero, IMGBurn and all fails at around 75%.
  When I tried to burn the recovery CD as I was asked that they have failed because of a problem STARTING...

  You can create DVDs from recovery use preinstalled Toshiba recovery media creator. Please test using DVD-R media.

  Have you tried using different media of high quality as TDK or Verbatim?

  Sorry, but this startup message said nothing to me. I've never seen something like this, even if I created several on several laptops Toshiba recovery disks.

• Program for creating Windows DVD cannot burn DVDs

  Program for creating Windows DVD cannot burn DVD due to can not find the DVD burner, free DVD burner disc see on the upper right. But my DVD drive with well with another burning program.

  Hello

  (1) have you made changes before the start of this issue?

  (2) you have the external devices connected to the computer?

  (3) what is the exact full error message?

  (4) is specific to the program the issue?

  Method 1: Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Resolution of the problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  For reference:

  DVD-video burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/DVD-Video-burning-frequently-asked-questions

  I hope this helps.

• Satellite M40: Power calibration error - drive cannot burn DVD - RW more

  My drive is a carpet * an oem UJ - 831S. After a screw-up partitioning job, I had to format my HD and reinstall Windows XP... and then I can not burn DVD - RW more.

  Tried many programs such as Nero and a fireman, gives an error of calibration of power from the beginning.
  Burning CD - r and CD - RW no problem however, and I can read CDs and DVDs of movies very well.

  Google and searched for a month without success, tried to blow the laser lens, but there is no dust, I tried different media, etc. I know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincedence to stop working right after that I reinstalled XP.

  An interesting note however, my laptop has not been provided with a CD of Toshiba, so I had to reinstall manually more drivers by downloading the Toshiba site, so I have a funny feeling, this could be a thing of the software/firmware, or even a framework.

  I installed the new firmware 1.02 for the reader as well. I don't remember what the firmware was before resettlement, IE the laptop computer settings to factory default, I'd like to downgrade to 1.00 if possible.

  Experts have ideas? And is there a way I can reset the firmware?

  Maybe I could remove the drive from the system-> devices and let XP Reinstall for me?

  Hello

  > I don't know the best answer is that the drive is done, BUT I refuse to acknowledge it because it is too big of a coincidence to stop working right after that I reinstalled XP.

  Of course, it s simply to say the drive is dead because everything looks like a hardware malfunction. Most often the power calibration error appears because of the drive lens can't calibrate in the right position and thus cannot read some CD or DVD s s or it of not possible to write about them.

  But maybe you are a lucky man and might try this procedure:
  -Try to remove the drive physically from the Bay for laptop
  -Restart the unit without the drive
  -In this case the operating system should start from the HARD drive
  -Close the notebook then reinsert the drive unit in the Bay of s for laptop
  During initialization, the laptop should recognize the drive and must pick up the firmware

  Then you can check if you can burn the DVD again, otherwise you will need a new drive

• Satellite Pro L650 - ODD cannot burn DVDs

  I can't burn DVDs. That is to say to ensure that I have the latest firmware I checked and do but still does not work please help

  Can you please tell us which laptop model you have and what operating system are you using?
  Your optical disc drive can read the DVD?
  What burning software do you use?

• Cannot burn DVD-R with my Satellite P100-342

  I bought a Satellite P100-342 two years ago. Some time after I tried to burn DVD + R and it was impossible, so I sent it to Toshiba. A few weeks later, when they returned to my laptop I saw that I can burn DVD + R, but it was not possible to burn a DVD-R.

  I tried with many manufacturers of DVD - R, but no one works.

  I checked my DVD multi recorder (HL-DT-ST-DVD RAM GMA-408N) with Nero Info Tools and it checks ON items: DVD + R and DVD-R. It shows that system ASPI are not installed and I don't know if that's the problem.

  My OS is Windows MCE.

  Will you help me, please?

  Hello!

  This DVD did you tested on your laptop?

  I use discs Verbatim always and never had any problems with it. You may also try verbatim and post workout.

  Good bye

• Satellite M45-S169 - Sonic v.7.31 cannot burn DVDs more

  I am using a v.7.31 Sonic Record now prepackaged on my Satellite M45-S169 for three years now.
  I was able to copy DVDs using this software.
  Until recently, it burns more.

  What's most frustrating is that space of memory on a blank dvd just exhausted once I try to burn dvd on cd files.

  Help! Help! Help!

  Hello

  Have you tried to delete upper and lower filters in the registry of the Windows operating system?
  Isn't it? Try this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Also I would not recommend trying the other and different discs (CD and DVD) from different manufacturers.
  But of course it could also be a hardware problem. I mean the discs of the laser lens has stopped working properly due to mechanical stress.

• Satellite L300D cannot burn DVDs

  I have Satellite L300D and Ii took about a year, but I have never tried to burn DVD s. Now I can burn and read CDs perfectly and s DVD playback, but when it comes to s DVD burning it have problems as supplied with the laptop Toshibas program does not work for burn DVD s and other various programs such as Nero and imgburn do not work. I always get write error and other things. Told me it was the discs, so I went and spent money for verbatim DVD's instead of cheap ones and there are still some coasters of each disc, I am trying to burn my DVD burner is

  HL-DT-ST DVDRAM GSA - T50N ata device

  Can someone help me please have tried everything restoring my settings to factory when I bought the laptop as nine and still no joy desperately need help.
  The answers lol?

  Have you tried to create recovery DVDs using the preinstalled Toshiba recovery disc creator?
  Please test with Verbatim DVD - R blank.

• Satellite L20: Cannot burn DVDs - power calibration error

  Hello

  I have problems when you try to burn the DVD on my Toshiba Satellite L20. Nero indicates a "power calibration error". Lens and drive have been cleaned up, but it did not help. Supprisingly, DVR +/-RW and CD are treated correctly. DVD player of any sort is also OK. Only burning DVDs (+/-), regardless of their manufacturer, fails.

  The next step, I wanted to put a fresh firmware in the drive which is Mat * a UJ - 841 S. I found the firmware on another site of PC companies. But the installer stops with the message that it does not apply to my reader however it was designed exactly for this kind of car.

  On the website of Panasonic, manufacturer of the drive, there is the information that support for this model is provided by the hardware vendor - in this case, it is Toshiba. But there is no firmware for this drive on Toshiba support pages.

  Can anyone help me, please.
  Thanks in advance.

  Piotr

  Hi Piotr

  First of all, note that after the installation of non-Toshiba firmware yourself, will lose it warranty for the reader. In any case, on a forum I found an interesting solution. You can try:

  1) click Start
  (2) select control panel
  3) click on Administrative Tools
  4) click on services
  (5) go your way down to SERVICE of the COM of ENGRAVING of IMAPI CD
  (6) right-click (on IMAPI), and then select Properties
  (7) in the middle of the window, it will say start type. Click the arrow on the right and select disabled.
  8) click APPLY

  I also noticed that Nero starts much more quickly than before. I recommend you test different blank media.

• Qosmio G10-133: cannot burn DVDs more

  Since the first day I was never able to record on a DVD. I've tried many discs. Different software. I get that day, but when the deer of burning starts, he discusses the creation of a newspaper report. Any ideas.

  Do I need a new rom?

  Hello

  I guess it was possible to burn DVDs to the start time.
  Well, it's not easy to say why it doesn t burn DVD media.
  Sometimes, perhaps because the wrong lens calibration.
  But in this case, you should replace the disk.

  Also a non compatible DVD media could be responsible for these issues.
  Please see the manual for the DVD compatible and tested.

  You can also try to remove the drive from Device Manager. After restarting again the operating system should recognize the drive again.
  Then check if it of possible to burn DVDs

• Windows Media Player cannot burn DVDs

  Original title: I have Windows XP Pro, I am trying to burn DVDs on Windows Media Player, unfortunately I can not!
  Windows Media Player can only burn VCD only and not DVD? Can you please teach me the steps?

  Hello

  1. what happens when you try to burn the DVD?

  2. you receive an error message on the computer?
  3. don't you make changes on the computer?
  4. what version of Windows Media Player is intalled?

  You check if the problem occurs on a different DVD brands

  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

• Cannot burn DVD get a 0XC0AA0301 error code

  OT: 0XC0AA0301 error code

  I get an 0XC0AA0301 error code when burning DVDs... Windows7

  Hi mr.mubark,

  I suggest updating the firmware of the player by downloading the latest version from the manufacturer and installation.

  You can also update the chipset drivers for the PC from the manufacturers Web site.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot burn DVD + R double layer in CS5.5

  Hey everybody,

  I can't burn a double layer (8.5 GB) DVD + R in CS5.5 again. I tried burning the same project on a regualr DVD (4.7) and it works fine. When I go to build the project, it begins to prepare to build and then I get the error message "access denied!" A little more information would be appreciated!

  I wonder if it's because it's a DVD + R and not DVD-R, but I don't see how it would make a difference, maybe I'm wrong...

  My drive Burns DVD, Blu - Ray etc so it should do.

  Any useful information would be greatly appreciated.

  Thank you.

  Right click on the shortcut of en and choose Run as administrator.  Then you should be able to burn a disc double layer.

  -Jeff

• Satellite Pro L875: Cannot burn DVD Recovery Media Creator and win 8

  I have a L875 Pro of the Satellite with Blu - ray burner.

  I tried to create the recovery DVD disc, the burn process stopped and error guest asked me to check if the disc is damaged or scratched. After the burning process, the DVD was not empty and some data wrote on this subject.

  I tried to burn the data disc in windows 8. the burner is not started. I'm only able to add files to the disc.

  I play Blu - ray movies and dvd movies, blu ray player was fine.

  I found information on the appropriate corresponding to the burning speed dvd disc speed.

  How do I know what speed the burner support?

  How to burn a DVD or Blu - Ray in windows 8? (I looked on the Microsoft forum, but the solution did not work.)

  It would be great if someone respond and make the drive burn discs.

  As a first step, it will be interesting to see why you cannot create recovery discs.
  Have you used vacuum on DVD-R media? Otherwise please use it and buy a product of high quality like Verbatim or TDK.

  Is there an option to create the USB stick recovery?

  Combustion under Win8? Have you tried to use some burning as NERO applications?