Cannot connect to the internet today. Everything happens very slowly.

Similar Questions

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link.

  My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?

  Hello

  • What connection do you use?
  • What is a wired or wireless?
  • What happens when you try to start Internet Explorer?
  • You receive an error message?

  You can check these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://support.Microsoft.com/kb/956196

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WAG-120N and static ip - wireless and wired clients cannot connect to the internet

  Greetings,

  I use the N WAG-120 AP and switch for 3 computers laptops and 2 Office. Our Department is assigned only a what IP static of our server, as well as a pc can connect to the server and the internet. I use the first lan port of the 120N Wag as a WAN port and I attribute the static IP address, and the subnet, default gateway, and DNS addresses. Connected clients receive an ip address from the DHCP (192.168.1.10x) router, but cannot connect to the internet. How can I configure my router to allow clients to connect?

  Thank you in advance!

  The default LAN IP of the WAG subnet is 192.168.1.0/255.255.255.0 belongs to 192.168.0.0/255.255.0.0. This means that 192.168.1.0 IP addresses exist side WAN and LAN of the WAG. What makes this configuration completely cannot be routed.

  Change the address LAN IP of the WAG to an IP outside the corporate network, for example using IP addresses private 172.16/12, for example to set the address LAN IP 172.16.1.1 with 255.255.255.0 subnet mask.

  The alternative would be to use the WAG as a point of easy access only, and not as a router. However, due to the 255.255.0.0 subnet in your network company you will not be able to access the web interface except from an IP address corresponding to the LAN IP address subnet of the WAG. Of course, this does not affect the wireless or wireline customers connected to the WAG...

• WRT54GL establishment cannot connect to the Internet

  I'm so basic in my problem as I feel stupid, but I get the message that the router cannot connect to the Internet.  Why the hell not?  I am writing on the same laptop, using the same ADSL modem and Internet connection.  So why don't the router sees it?  The last time I have tried again, start over from scratch, he kept do and re-do "check your computer's connections" and then ask me again my password of.  I didn't know if he wanted the original preset 'admin' or that I had sometimes back (hours) came the first time that this has been asked.  So I tried both.  Finally he moved reset the password or something, and I finally return to the "the router cannot connect to the Internet.  Power, then turn on the DSL Modem. "I did already too many times to count.  And again I say, this direct DSL connection of the modem for my laptop is fine.  But when the cable Internet through the router, then the other wire goes to my laptop, no Internet.  All the time my DSL modem displays a green light for the Internet.  And the router shows a light on the Internet.

  I'm too tired to walk any further tonight.  Maybe someone has a simple suggestion.  I'll check tomorrow.

  Thanks for helping this rank amateur.

  Try to configure the router manually.

  Connect the modem to the Internet port and the computer and port Ethernet 1 of the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

  Follow this link to configure the router with DSL Internet Service.

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir

• I had Acrobat Pro 8.3 for awhile. It is a registered product. However, as I updated to Windows 10, repeat me that it cannot connect to the internet to register or update the product

  I had Acrobat Pro 8.3 for awhile. It is a registered product. However, given that I have updated to Windows 10, he repeats that it cannot connect to the internet to register or update the product. I am connected to the Internet. What should I do?

  Thank you

  Reinstallation of my original DVD has solved the problem.

  Charlie

• Laptop suddenly cannot connect to the internet

  Laptop acer Windows 8.

  Recently, AVG asked me to update and I did. It you are prompted to restart the computer, and I agreed. Everything went well during the restart period. However, I could not connect to the internet. Whenever I type in a web address in the load bar and and then chrome displays this Web page is not available. Skype seems also impossible to connect. My phone and ipad (other devices) has very well able to connect and had no problems. I ping via cmd google.ca and was able to reach it. I ran Windows troubleshooting diagnosis and got this:

  

  What exactly is happening here? All my other devices can connect but just my laptop cannot. It's quite urgent.

  Thank you!

  Problem has been resolved. Uninstalled AVG and rebooted. It seems that there is something wrong with the update.

• Reinstalled XP - cannot connect to the internet

  Hello.  I have an Asus Eee PC 900, which I restored to factory settings, using the XP disc that comes with it.  However, I can't connect to the internet.  By the way I'm having exactly the same problem with my Eee PC 701 with Windows XP, after restoring to factory settings too (have installed Linux and it connects fine) so I think it's an XP thing.

  The pc displays available networks, I tried everything that I know, have set up the network and typed in my network key.  When I try to connect, nothing happens.  If I try to fix it, I get the message Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network.

  I tried:

  (1) to reinstall the driver (it says it of Ok, and is the last being listed).
  (2) setting the date and time correctly on the computer.
  (3) check that 'enable IEEE... '. "is checked, authentication
  (4) turn off ' use Windows to configure my wireless "(but if I do, no available wireless networks appear)

  I wonder if Service Pack 2 is simply too old to connect to internet!  Is there anything I can download on my other computer on usb and install it on either an Eee Pc?  Like Service Pack 3 or something?

  My network is WPA2 Personal

  The box to "enable authentication IEEE 802. 1 x for the network"must NOT be checked.

  You should have installed Service Pack 3 for your restoration efforts.  Unpatched, Windows XP Service Pack 2 is not able to connect to wireless networks that use WPA2 encryption (which is what you are - and should be - aid).  Older hardware may also be unable to connect using WPA2, but this doesn't seem to be your problem because you connected before the restoration and that you can connect now using Linux.

  There is a catch-22: Windows Update will not install updates for XP (including Service Pack 3) except if you have installed Service Pack 3.

  Connect your computer to your router with an Ethernet cable and do the following:

  • Read http://support.microsoft.com/kb/950717
  • If your PC is a HP Pavilion and Presario, Media Center and has an AMD processor, install the following hotfix before you install SP3--> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=uk&lc=en&dlc=en&softwareitem=pv-60484-2
  • Download SP3--> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24 (ignore warnings about the network facilities and computing professionals)
  • After you install SP3, go to Windows Update and install post-SP3 updates a lot; several reboots will be probably needed
  • Now, follow these steps to retrieve your wifi connection:
  1. Right click on your wireless connection icon and select Properties
  2. Select the wireless networks tab
  3. Confirm that "Use Windows to configure my wireless network" is CHECKED
  4. Remove all entries in the list of "preferred networks".
  5. Click 'View wireless networks,' select yours, enter your WPA2 password carefully, then click on connect

  If you are unable to connect your computer to the router with an Ethernet cable for a reason, use another computer (for example, the one you use to ask questions here) to download the patch from the HP site and program installation of SP3 from Microsoft of the site and to copy on a USB or burn it to a CD.  Then copy the files on the desktop you're your computer and run them as if you had downloaded them.

• Why other computers cannot connect to the internet with my ad - hoc connection?

  Hi all! Here's my situation.
  My friends router is dead and we are in the smack dab Middle no where with no transport and we want the internet.
  We have only an Ethernet however.

  Here's my situation.
  I want to create an ad - hoc network and share the internet connection using ICS. The problem is, when I secure my ad hoc network with WEP or WPA cannot connect to the network. The network is visible on the computers of my friends (mac and PC) and they put the password nothing is done.

  But here's the kicker, when I don't put no security on the network, everything works fine.

  How do I create an ad hoc ICS with security network and have not really work?
  Thank you guys!

  Hello

  Thanks for posting. If I understand correctly, you experience the problem with the connection of computers using the Ad - hoc network. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information on the issue.

  1. what security software is installed on your computer?

  2. share your protected password put on or off?

  The sharing tab is not available if you have only a WLAN card.

  Method 1:

  Follow the link below and set the ad hoc network.

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Set up a wireless network without router

  http://www.Microsoft.com/windowsxp/using/networking/setup/adhoc.mspx

  Method 2:

  After you follow the steps above to set up ICS on the host computer, make the following changes on other computers (but not on the host computer).

  (a) open Internet Options by clicking the Start button, clicking Control Panel, clicking network and Internet, and then clicking on Internet Options.

  (b) click on the connections tab, and then click never establish a connection.

  (c) click on LAN settings.

  (d) in the dialog box settings of the network Local (LAN), under automatic configuration, clear the check boxes automatically detect connection settings and use automatic configuration script .

  (e) under Proxy Server, clear the use a proxy server for your LAN check box, and then click on OK.

  If the password protection sharing is disabled, I suggest to turn on you or so try if this can help fix the problem.

  Method 3:

  Follow these steps and check if that helps.

  (a) click Start, type Control Panel in the search box, press ENTER.

  (b) click on network and sharing Center, click change advanced sharing settings in the left pane.

  (c) click on him to expand the network profile (type) that you want to turn sharing on or off for protected by Word.

  (d) select (dot), turn on password protected sharing.

  Visit these links for more idea on the Internet connection sharing between computers connected on an Ad - hoc network:

  Set up a shared Internet connection using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

  More information on:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing

  Reply back with the results. I'd be happy to help you further.

• Windows 8.1 and cannot connect to the internet even though I have full WiFi access.

  Original title: Windows 8.1 and cannot connect to internet even though I have full WiFi access-problem occurred just after working fine for over a year

  Uses Windows 8.1 for over a year with no access to the internet.  Today, I can access is no longer the internet using Explorer, Mozilla Fire Fox or store apps.  (Tried to install a game just to test the internet connection-no luck).  When I try to connect the computer just sits there with the indicator connection just spin but never passes through.  I have good indicated WiFi (Internet) access.  While they inspected the updates, the only thing that appears on the current date is some Microsoft Silverlight is.  Could that that may cause my problem?  I didn't do any changes and have no problem until today.  I'm not always well informed in this area and I am at a total loss as to how to proceed, what to check... hope someone can advise me.   Thank you, DebbieG211

  Hi Debbie,.

  You might face this problem because of wrong settings in Internet Explorer. You mentioned that you get the update of windows Microsoft Silverlight, so we can deduce that there is a problem with the Internet browser. Please write us with the following details.

  (1) do you get error messages when all websites fail to load?

  (2) what is the brand and model of your computer?

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  You can also follow the steps in the link below for further troubleshooting. It is a tutorial to solve the problem of wireless and wired connections.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the details asked and the status of the issue.

• NB200 can connect to wireless networks, but cannot connect to the internet

  I could connect my Win XP netbook to my network wireless secured to the House, other networks and public networks such as the library and McDonald's. This week, I am away from home and discovered that while I can still connect to a number of different wireless networks, I can't connect to the internet with Internet Explorer.

  I had this problem once before and fixed by reinstalling Windows XP and all my other software. I have no idea why it happened again. I'm hoping for a less radical solution to the problem... ?

  Hello

  You can try to renew the IP address.
  Got to RUN and type CMD.
  This would start the console (DOS window)

  Here, you use the command: ipconfig / renew

  It s also advised to update the Wlan driver. I've noticed some problems with older drivers for Wlan
  Here you can get the most recent:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• DeskJet 3520 cannot connect to the internet

  I bought a new Deskjet 3520.  I set it up on the wireless network, and everything seems fine.  However, as I'm trying to implement Web Services, he told me always impossible to connect to the internet, it does not say why.  I have the correct key in place, and everything else on the wireless can connect to the internet.  I have uninstalled/reinstalled software... rebooted the router, restarted the printer, still no go.

  I understand that you are not able to connect to web services.  I would follow the steps below.

  1. get the IP address of your printer.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

  Let me know how it goes.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!