Cannot print even after installing drivers.

Similar Questions

• I can't get my printer coupon program to print even after installing it again and again

  I have a coupon printer installed program on my computer, and it used to work very well.  Then, a month ago, I tried to use it and when I went to print it told me that I had to install the coupon printer in order to print coupons.  I installed again and it goes through the installation and then said it was successful, but when I try to print it tells me I need to install again.  Please help because this problem is ongoing for about a month maybe longer.

  Hello

  Step 1.
  I would ask you to uninstall and reinstall the printer completely and then see if you can print.

  http://support.Microsoft.com/kb/307895

  Step 2.
  After removing the printing of add or remove progr AMS software, delete the folder w32x86 from the following location.

  C:\System32\Spool\Drivers\W32x86
  Note: C is your system partition.
   
  Step 3.
  Now reinstall the drivers from the computer manufacturer's website and check.
   
  I hope this helps.

• Presario CQ40: Display a ratio and incorrect resolution even after installing drivers

  Number and name of the product

  HP Compaq Presario CQ40 (339TU)

  Operating system installed

  Windows 8 Pro (recently re-installed)

  All changes to your system until the problem occurred

  Accidentally deleted the partition reserved system (about 300 MB)

  The question
  

  I recently re-installed the OS on my laptop (the previous operating system was the same). I wanted to do a clean install and I accidentally deleted the system reserved partition which was about 300 MB.
  

  The installation is completed without any problems. After installation, I noticed that the native resolution became 1200 x 800 (3:2), where it was originally 1280 x 800 (16:10) and also the display is detected as "Mobile PC Display. I went through the update of Windows, but it also could not detect my drivers. I went to the official site of HP TechSupport (here's the link), but there is no drivers for Windows 8.

  Then I tried the Intel site and found drivers, them, but still nothing happened.

  I googled for 2 days to resolve this problem, found nothing that worked. I have re-installed, Reset, refresh, auto repaired, the PC from the windows installation CD, nothing worked

  I had used Windows Vista, 7 and 8 on this laptop. The previous version of windows, I used for 1.5 years is the same as the one I installed today on the same CD. Previously, when I installed windows and went to Windows Update, it detected all my drivers and updated their. I had nothing to fear.

  I was hoping someone here could find me a solution to this problem.

  Thanks in advance

  I fixed it!

  I downloaded the latest version of the bios and flashed. Previous bios version was same but now my resolution is 1280 x 800

  I did not myself before recovery disks, but I will of course in the future.

  Since I have no way of identifying what actually caused the problem, I'll stay happy with the solution that I found. This thread can now be marked "resolved".

  I thank very you much for trying to help. I love HP!

• WiFi works does not even after installing drivers

  Recently I bought HP compaq 15-s006TU and the wifi does not work in windows. Press the keyboard wifi is always orange. I tried to download and install the drivers wifi and bluetooth from the following links:

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?javax.portlet.begCac...

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?javax.portlet.begCac...

  They install but wifi still doesn't work.

  I have windows 7 Professional 64-bit

  I also tried to update the drivers in Device Manager, but it says that the drivers are up to date.

  Thanks in advance for the help!

  Try this: Adapter WiFi Mediatek

  Uninstall the current manager of devices - network cards.

  Download, save & install the version above.

  Restart the system.

  Check.

  Concerning

  Visruth

• Can not see the images from the camera, even after installing drivers

  Original title: I see nothing

  Why my camera is not Word... I already install the driver pluged in camera... but the image is not displayed... my camera is turd webcam? plsss my
  question I need... tnx

  I suggest that you contact the manufacturer of the webcam and talk to their technical department.

• wireless connection unavailable even after installing drivers wlan

  Original title: no wireless connection

  I tried several wlan driver but no luck

  And din't poster Device Manager driver was installed
  It's new computer just install windows 7 64 bit and no wireless adapter
  any solution for this? Thank you very much

  Hello

  (1) what is the number of brand and model of the computer?

  (2) you get an error message?

  To solve your problem, try the steps in the following article.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Note: By updating the wireless driver, I suggest you to download and install the latest version of the driver wireless on-site computer manufacturer.

  It will be useful.

• problem installing drivers for WinTV-PVR-150/500. rpet pilots are not digtally signed after installing drivers. HELP PLZ?

  rpet pilots are not digtally signed after installing drivers. HELP PLZ?

  See this

  http://www.SnapStream.com/download/hardware/PVR-500MCE-installation.asp

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.

• Unable to print on hp 1320 even after installing the upd

  I'm unable to print (even the test pages) on my printer. I tried installing the upd and after days of work on the subject, was finally able to print. But I find that it will not be printed once again today.

  I also notice that there are 2 printers installed. One is called HP PCL5 to universal print and other series hp Laserjet 1320 UPD PCL5. I don't know who I should focus on both printers. I was able to get them to print but now can't get either to print. It is connected to a netgear router.

  Hello

  Please follow the steps in the link below to fix the problem:

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=410622&docid=emr_na-c00026681&docLocale=en_US

• 10 the desire: desire 10 cannot adjust the print size after installing new cartridge

  After installing the new print cartridge (60XL) print size is very large: so far, I have unplugged the usb connection and power, reinstalled the cartridge a few times and run tests... I also went to control panel and looked at all the parameters, but find no way to adjust the size of printing... can anyone offer a solution... Thank you

  the solution: problem was with Firefox, when I switched to Chrome it prints perfectly!

• Someone out there who has an ongoing problem with 7 refusing to print, even after that the driver was abandoned and re-installed?

  I have a Toshiba laptop that runs Windows 7 with an HP printer 6 L. I am running Open Office 4.0.0 and the latest version of Adobe Reader. To date, that the system is undesirable! The 6L display test endless pages but refuses to print anything out of system 7. I dropped 6 L Driver, registry & file cleaned up and optimized the system and then reloaded the driver off of the HP site but the system refuses to print. I even went up to turn off the printer for more than 24 hours to try to get the printer to the reduction in the memory and empty the memory to zero to try to kickstart the printer to pick up the 7 material systems. Up to present all this for nothing. 6L memory is fixed at 1 024 Ko and the document larger than I tried to print has been 136 k so the memory capacity must be nothing. Anyone, anyone, outhere who can help, please. I'm ready at this stage to give up the printer with an AX, since it is now beyond the frustration and get into madness! I must also stress that the 7 system also creates a (1 copy) in the printer Panel. There is no need too!

  Hi Mike,.

  Do you have an error message when you try to print from the Windows 7 computer?

  I suggest to refer to the following article and follow the steps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also follow the steps in the following article.

  HP LaserJet 6L - cannot print from a custom Application Windows

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=ipl00001&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=25476

  Reference:

  HP LaserJet 6 L Printer series- Frequently asked questions

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportFAQ&lang=en&cc=us&docIndexId=64178&TaskID=101&prodTypeId=18972&prodSeriesId=25476

  Feel free to get back to us if the problem persists. We would be happy to help you.

• Problems after installing drivers.

  For a long time, I had a same problem installing drivers.  I finally got out it was because I have my program files all together for my E drive (my C drive is a smaller SSD).  I made the necessary changes to my system to allow the drivers to be installed on the C drive.  After installation I copied the entire tree on my E drive and changed my system to install on E.

  Since that every time I try to print I am told that the printer is offline.  I can't open the scanner either.  Windows find the printer successfully, and I'm able to do things like check my ink level.  I can not print correctly on other computers on my network so I know the printer is fine.

  The printer in question is a Photosmart HP 6510, computers are all windows 7 and connections are all wireless.

  I am sure that the problem is the way I have all my files on my E drive program and not my C drive at 90%.  The ideal solution would be for the HP Installer to assume not only that I want things on C, but I don't see that changing at any time soon.  Anyone with advice on how it works?

  Hello JPadilla,

  I set up a laboratory and recreated the error code that you receive when you try to change the drive in which the software is installed to. I'm able to successfully download, extract and install the HP software on my E: drive by following the steps below:

  1. Please make sure that there is no HP printing software installed on your C: drive, even if it's just the basic print drivers go ahead and remove them.

  2. clear your temp folder on the C: drive: click on your Start Menu in the search box type %temp% and delete the files.

  3. Please make sure you back up your registry before proceeding to #4.

  4. has created a folder on your D: drive and name it 'Test'.

  5. click on your Start Menu and search for "regedit", once you are in the follow-up record this way:

  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > current Version

  6. now that you are in the registry, I need you to right click on the following files and select Edit and change your:

  ProgramFilesDir to D:\Test

  ProgramFilesDir (x 86) to D:Test (x 86)

  ProgramFilesPath to Test %

  ProgramW6432Dir to D:\Test

  7. now, we can go ahead and download the drivers and full software features. Once you have clicked on the download, select Save as using the drop-down arrow and select computer and select your E: drive, click Open, and then save. Once downloaded go ahead and select RUN.

  You should now be able to install on your E: drive, as stated previously I managed to clear the error and changing the drive in which the software was the installation by following the directions above.

  Please keep me updated and I would like to know if it is a resolution that is successful for you or if you need more help, I'd be happy to help you.

  Thank you very much

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• HP LaserJet P2035n: HP 2035n ceases to printing/answer after installing the new toner

  Hi, I work for a School District, we have several of these printers and recently had this problem on 2 machines. Problem is that the printer is completely insensitive after installing a new toner real HP 05a.

  Install toner turn printer on, it passes through the light initialization sequence and shows ready, will not print a test page for the PC, will not print a page of the control panel of the printer configuration, will not be recognized through its USB connection (PC gives same message the USB is damaged or defective), does not pick up an IP address and is not accessible via the Web console.

  Turn the printer off and reinstall the old toner put under tension and everything works again, USB is recognized and system installs the drivers, accessible via the Web console, prints the config to the PC and the control panel of the printer. I have 3 used toners and all three will work with both printers, I have 2 new toners and the two do not work in the printer. Thanks for playing.

  I saw a few client computers and forums on other sites about this issue defective chips on the cartridges-back them and replacements should be good.

• Problems after installing drivers for HP Photosmart 5510e

  I was helping my sister set up his new printer HP Photosmart 5510e on a laptop that has Windows 7 64 bit.  She was not wearing the disc so had to download the drivers from the HP website.  Since she has downloaded the drivers, the computer not giving him stop, go to the Task Manager, or do much. I have check that she went to the site of HPs.  Has anyone else had problems with their computersw after installing the drivers?  I don't know what to do.

  Thank you
  Carla

  Hi Cmcgaw,

  Follow the steps below to completely remove the HP software. Let me know if you still have problems with the laptop after uninstalling the software?

  1. type % temp % in run

  2. look for a folder called 7z? Example: 7zS6D6F, and then open it.

  3. open the contents of the file Util

  4. open the folder titled CCC

  5. If you have an HP computer, run L3uninstall.bat. If your computer is not HP, then run the L4uninstall.bat

  6. once the uninstaller cleaning brush is finished, restart the computer.