cannot reset the printer

My printer just stopped working - said that he had to be reset by turning it off, unplugging it, and then reconnect and turn it back on.

I got the error message "0x6111bed".

When I turn it back on, the error always, more he reminds me to reset using the exact process I used.

Ink system failure means that the printhead is not able to filter the ink correctly to get it on paper. It's a hardware problem with printhead. If the printer is under warranty, we will replace the printhead for you. If this isn't the case, we have other options through our telephone support to help you.

Do not hesitate to call 1800-474-6836

When a solution is found, please indicate the position that solves your problem.

If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
Although I work for HP, my messages and responses are my own opinion and not of HP

Tags: HP Printers

Similar Questions

  • LaserJet Pro 200 M276nw: lost password cannot reset the printer

    Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

    Hello and welcome to the community of HP @MsBz,

    I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

    To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
     
    Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

  • Color Laserjet M252dw: Cannot reset the printer

    I'm unable to access the configuration screen to reset my printer because I keep getting prompted for a password that I unfortunately forgot the setting.

    How can I reset my printer in this situation? Thank you.

    Try the lower-left corner of the menu for a great memory NVRAM reset. The same procedure as above, except that you press the left instead of the right.

  • P1102w - cannot find the printer

    Hello

    I'm unable to print using a wireless connection.

    the printer is p1102w.

    operating system is MAC OS 10.10 Yosemite

    Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

    I tried the solutions on your support site, but nothing helped.

    For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

    All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

    I tried to move the printer closer and further away from router. No results.

    No web proxy is related to my network.

    To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

    But some time the problem reappears.

    It's really frustrating. Help, please.

    Hi @xopot ,

    I see that you have problems printing via wireless network. I would like to help you today.

    Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    Configure a static IP address for the printer.

    The printer is not found during Installation wireless.

    Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • HP Envy 5530: HP ENVY 5530 "cannot find the printer"... impossible to see where I am going wrong!

    Hello

    We just put a HP Envy 5530, set up was fine, I tried installing but get the message "cannot find printer" over and over again.

    I tried to download printing HP and Scan doctor but also, it does not find the printer.

    I ran two reports of diagnoses on the printer, everything looks ok, I have an IP address with an IP address that suggest that it has connected wirelessely, the network report said no problems were discovered.

    I tried disabling my firewall, all made once again, still nothing.

    I put the IP address in the address bar, but it does not open!

    I don't seem to have a printer/USB cable witht the printer so I can't tey wireless - I one of them, it was a new purchase?

    I don't really have an idea what to do next, it seems I have a printer connected to the network, your laptop to talk to the network but nothing to talk with each other. I also tried to find the printer with my IPad, but he also could not find a printer.

    Any ideas, im really frustrated

    Thanks in advance

    Hello

    They are on the same Beach, they should be. Now please reset it and try again

    1 reset the printer

    b press settings (wrench),

    (b) press tools then use the arrorw down to access page 2/3,

    (c) touch Restore Factory Defaults - wait a few minutes

    2 reinstall the printer

    (a) you can use the CD, but it will download the file and may take ages to download. Please download the software and the following drivers

    http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-6/EN5530_198.exe

    (b) turn on the printer,

    (c) right click on the downloaded file and select run as administrator.

    d select Wireless and then follow the instructions on the screen.

    Kind regards.

  • Got paper stuck in the printer and now will only print proofs. How to reset the printer

    Got paper stuck in the printer and now will only print proofs. How to reset the printer

    It looks like you may have some saved jobs in your queue that need to be removed.

    Here's how:

    To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
       
    You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
          
    To stop the Print Spooler Service, click Start, run and enter in the box:
           
    services.msc
           
    Click OK to open the Services Applet.
           
    Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
       
    The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
       
    If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

    Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
       
    Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
       
    Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
       
    C:\WINDOWS\system32\spool\PRINTERS
           
    Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
           
    Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
       
    After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

    Submit new failure of print jobs.

  • Cannot find the printer on the wireless network

    My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

    Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

    Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

  • After installation cannot find the printer driver on my mac

    I downloaded hpprinterdriver3.1.dmg from the site web from apple and installed.  Installation was successful.

    However I can't find the driver on my computer.

    Is there something wrong?

    Thank you

    Owen

    If you haven't already done so, try to reset the printing system.

    OS X Mavericks: reset the printing system also of Yosemite

  • Reset the printer: what you need to know

    There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

    A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

    If the printer has already damaged due to her fiddling in the care of the menu, you may need to Contact HP for (paid) service.  Best not to do the damage in the first place...

    An example of the damage that may be caused would be the printers that use special cartridges installation.  Reset the printer to factory conditions can cause sound to demand once again the cartrdiges Installer.  If the original cartridges of configuration have been exhausted or discarded the user must contact HP for cartridges to install since there is no distribution channels.

  • C5150 - how to reset the printer to clear the network password?

    I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

    I guess that you did not read my * last * post here, which has been designed for you. in any case...

    PhotoSmart C5100
    -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
    -Press "OK".
    Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)

    TO MAKE RESET "Half full" in the HELP MENU:

    -Use the > to scroll to 'Resets the Menu' and press 'OK '.
    -Put "Full Semi" highlight Reset and press 'OK '.
    -Unit will shut off by itself in 3-5 seconds
    -Power and then turn it back on by button / stop
    -Leave the print alignment page - do NOT cancel
    -Allow to go through maintenance and Photosmart screen (normal)

  • I have Photosmart 5580. When I switch to the power I get the 9995F886 message. I have reset the printer and error

    When I switch to the power I get the 9995F886 message. I have reset the printer and the error disappeared. What is this error message? How can I delete it for good.

    bedamax,

    This article should help to resolve the error you get:
    http://support.HP.com/us-en/document/c03081973

    Try the steps and tell us if it helps.

    Good luck!

  • Cannot find the printer HP Deskjet 3055 has wireless

    Hi bought this printer and went through the set up disc. The printer is connected and has the right signal to our home network and the laptop also connects wirelessley to the internet just fine. The laptop cannot find the printer - I tried all the suggestions and put the IP address for internet search and it will not. I can't understand. Also tried to install on the MAC laptop and still only goes up to now and then are unable to communicate with each other. Please can I have some advice.

    Oh, wait a minute--I just got it working by stopping laptop, printer and disconnect the wireless router and all start back them up again. Then to try to make it work on the MAC laptop - what this space! Thanks for the help.

  • Cocomputer cannot find the printer and I do not have a disk for it

    Original title: printer SUPPORT

    my computer cannot find the printer and I do not have a disk for it

    Then, download and install the appropriate drivers on the printer manufacturer's support web site.

  • HP envy 4500: PC cannot find the printer

    I ran the installation disk and printer tells me that I am connected. Wireless light is stable. PC cannot find the printer.

    Hello

    I'm glad to hear that your problem is solved and everything works fine now.

    Good day!

  • Cannot install the printer and windows update error 80070026

    Original title: Registry Editor not work cannot install the printer

    I have Vista the operating system on a Dell laptop with a Core 2 duo, map of Nivea.  Norton Antivirus now after it has started.

    Tried to install the dell printer after uninstalling all printers.   I scan my system using promp... sfc/scannow then I got windows results resource protection found corrupt files but was unable to fix some of the them.details are included in convertible bonds. Journal windir/logs/CBS/CBS.log
    for example:C:/windows/log/cbs/cbs.log

    I looked in the directory C find regedit.exe to rename, but was unable to find it.   I found these if this can help.

    Regedit.exe.4288.dmp
    Regedit.exe.3280.dmp
    Regedit.exe.2292.dmp

    I also got error or popup that without running windows Explorer and then restart it.   I can't install the printer as it pops up and I need to close the program.

    also receive error installer that it is already running
    install GUI is unresponsive

    error code 80070026 during the installation of windows updates.  I open without addons and updates are all to date.

    I'm sorry that there is so much information and error codes.  I think that all what concerns the corrupted files.   Can you help solve c drive please.

    Hello

    1. What is the serial number and model of the printer?
    2. What are the failed updates?
    3 have there been any changes made on the computer before the show?

    I suggest you try the steps to solve the problem with the installation of printer.

    Method 1:
    Run the Fixit and check if it helps.

    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    For more information, see the links:
    Find and install printer drivers
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
    Search for a printer, the manufacturer Web site
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website
    Add or remove a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    I suggest you try the steps to fix the problem with Windows Update.

    Method 2:
    Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
    http://support.Microsoft.com/kb/929135

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 link to return the computer to a Normal startup mode.

    Method 3:
    Temporarily disable the security software.
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 4:
    You can also manually install updates (KB number) by downloading from the Microsoft Download Center.
    http://www.Microsoft.com/downloads/en/default.aspx

    For more information, please see the links.

    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
    You cannot install some programs or updates
    http://support.Microsoft.com/kb/822798

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    322756 (http://support.microsoft.com/kb/322756/)
    How to back up and restore the registry in Windows

    Warning: An upgrade on the spot is the final solution before you have to reinstall the operating system. Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process

    Hope this information is useful.

Maybe you are looking for

  • Problem with mouse Logitech on Sierra

    I posted a question in the forums of Logitech, but I thought I'd ask, here, to see if anyone had ideas. I have a Logitech Marathon M705 wireless mouse.  After update from my MacBook Pro to Sierra, I've updated the Logitech Control Center version for

  • HP Pro 3130 MT: Graphics issue

    Hey, I need your help, I just got some problem with my computer I had to reinstall the operating system. After the implementation, the resolution is low. Normal resolution is 1600 x 1900, but I can't change it. The maximum value is less than 1600 x 1

  • Skype in point 8.1 of Windows - how can I return to the classic use as in Windows XP and Windows 7

    Dear gentlemen/Madame, I searched and could not find a solution to my case. I bought a laptop with Windows 8 preinstalled with SKYPE preinstalled as well. This new pattern of Skype is very annoying. Please let know us if there is a way how can I go b

  • Replacement screen ref 710432006

    Pavilion 23 all in one model 23-g125t broke the screen. Cannot find replacement no where on the web, HP partsurfer is no help. I do not understand why so hard to find for this computer screen replacement? Screen made by Sansung ' LTM230HL08 H01HP PN

  • WiFi 802.11 b, g, n (2.4 GHz and 5.0 GHz), why is the razr not able to use 5 GHz?

    I was wondering why we are not able to use 5.0 GHz, does make a difference? Totally, I do not know. Maybe you guys can help me. Thank you!