Color Laserjet M252dw: Cannot reset the printer

Similar Questions

• LaserJet Pro 200 M276nw: lost password cannot reset the printer

  Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

  Hello and welcome to the community of HP @MsBz,

  I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

  To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
   
  Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• LaserJet 4050N: cannot connect the printer to the network.

  Hi all

  I recently moved my house, where a new router. My HP LaserJet 4050N was previously connected to my router to another and worked well on the network. However, in my new House and my router (ethernet port connected to the printer) I can't find the printer on the network. I tried to change the IP address, but still when I try to ping, I get the timeout error.

  Help, please.

  Hi Calstar,

  I suggest you uninstall the printer and then reinstall it with the new IP assigned to the printer. Let me know what you find?

• cannot reset the printer

  My printer just stopped working - said that he had to be reset by turning it off, unplugging it, and then reconnect and turn it back on.

  I got the error message "0x6111bed".

  When I turn it back on, the error always, more he reminds me to reset using the exact process I used.

  Ink system failure means that the printhead is not able to filter the ink correctly to get it on paper. It's a hardware problem with printhead. If the printer is under warranty, we will replace the printhead for you. If this isn't the case, we have other options through our telephone support to help you.

  Do not hesitate to call 1800-474-6836

  When a solution is found, please indicate the position that solves your problem.

  If I have solved your problem, please do not hesitate to provide laurels and make sure that you mark this thread as provided solution!
  Although I work for HP, my messages and responses are my own opinion and not of HP

• Color LaserJet 1025: where in the printer 'HP Color Laserjet' machine is the color cartridge / Farbpatrone

  for the color RED light flashes

  where in the machine 'Printer HP Laserjet Color' (location/place in the machine) can I find color cartridges

  that I need to replace.

  Die fuer die LED Farbe rot books end Fuellstand! Nun muesste ich die ROT-cartridge replace

  da ich is ueberwiegend nur mit schwarz group habe und auch nur die shcwarz --Tonercartridge ersetzt habe

  konnte ich den ORT gained der Maschine nicht find wo sich die Farb-cartridges are winds of die ich muss.

  Die PDFs fuer den 1025 color enter keine statement (very konnte ich find nichts dazu

  und bisher nicht antwortet HP support!

  Was soll ich machen mir einen Epson tintenstrahl Drucker kaufen und den HP 1025 color wegwerfen nur weil die RED Farb LED Toner-red nachkaufen anzeigt?

  The Series CP1020 LaserJet Manual User Guide (which I think applies to your model of CP1025 ) shows how to replace the cartridges. the first steps are:

  

• How to cold reset the printer Laserjet M175nw MFP Color 100?

  Try changing the settings wireless, but keeps on asking for a password that I don't remember.

  Printer works fine so hard connected to the network.  ePrint works very well.

  Just updated to the latest firmware available.

  I just need to change the wireless settings that I recently changed my password for wireless network.

  In addition, access to the menu is disabled from the control panel of the printer.

  So the only way that I can think of is to reset the printer and start the installation from the top.

  Thank you.

  Hello

  You must perform initialization of storage generally in order to remove the password configured in the fuly, any other reset will not erase this kind of configuration.

  In order to perform this reset, you should contact HP Support.

  You can get the details to contact HP by selecting your region and following technical support after purchase below:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Kind regards

  Shlomi

• HP color laserjet M252dw: trying to print envelopes

  Have a new 252dw. Does not correctly print size envelopes. Prints gibberish? CCM, $JcC... across from the end of the envelope.

  Hello @mcrep,

  Thank you for showing your interest in the HP Forums! I see that you have problems printing of envelopes, they come out with truncated text. I want to help you.

  Here is a document to double check all the parameters of the print driver when printing envelopes (OS X).

  I checked the website and couldn't find the Full CV drivers for this model featured with 10.11. We can check to see what drivers are installed for the printer.

  Click on the Apple menu, click System Preferences.

  Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M252dw)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Let me know how was the name of the printer.

  You will have to perhaps download and install the HP v3.0 for OS X printer drivers.

  Can you print correctly from other applications?

  What application you use to print envelopes?

  If you're still having problems, please give the steps you have taken and the results, so I can help you more quickly.

  I would like to know if these measures worked for you. You can select the 'accept as Solution' and the 'Thumbs Up' buttons, which will help us and others see that we have the answers! Good luck!

• using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative. * beep *.

  using the color laserjet 3600n - I want to print in black and white, but it prints black and white negative.  * beep *.

  I was able to recreate what you see.   I managed to work around it by installing a different driver that is also supposed to be compatible with the CLJ3600.

  Please consider trying this as a possible solution:

  (1) uninstall the driver CLJ3600 by opening printers and fax machines, driver selection and right-click on it and select Delete.  Once it is removed, right-click on an empty space in the windows printers and faxes and select Server properties.  Click the driver tab, click the CLJ3600 and then click on remove.

  One when you're done, restart, and then install the CLJ3500 driver.  This is a previous version of the driver that has been implemented for the CLJ3600 and is compatible with the CLJ3600.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=315862&prodNameId=315867&swEnvOID=228&swLang=8&mode=2&TaskID=135&swItem=LJ-16838-3

  After installation, try printing again.

  The output I have indicates it will print is more negative.  Please let me know if you have success.

  One caveat about this solution.  The Color LaserJet 3500 doesn't support duplex.  Of workaround only works for two printing on the package of basic or the Color LaserJet 3600 N.

• Color Laserjet Pro M452nw: Not accepted print job

  Just installed a new HP Color Laserjet Pro M452nw today, it connects using wireless to my network.  I followed the installation instructions and everything seemed fine and I was able to print the test sheet.  However, when I try to print a document from my MacBook, I get an error message in the print queue, declaring: "Print job not accepted."  I saw the support log, find others with the same question, but maybe on the models of different printers.  In any case, I have followed the instructions for the patch, installed a new printer driver Apple, reinstalled the printer, reset the printing system and I keep having the same problem.  Furthermore, he sometimes interrupts the print queue after encountering the error.  Do not know what to do...

  Hello @sanovogo

  You can try the following changes

  Go to the network set up on the printer and network services, disable ipv6 (disable)

  Go to the link (always within the network set up the menu) speed and the complete change to 100TX

  Sent a new print job to the unit

  If it fails while you see the error on the PC to the printer and try to deal with a report of configuration in the menu reports

  Get the IP address on the right side on the 1st page under settings of the printer

  Enter the IP address in the URL of web browsers, this online application should open indicating the status of the printer in this way can isolate you the connectivity to the printer

  If by this desire to point showing the error on the PC, you can print the configuration report and Web site opening, I'll suggest another pilot, because it must be the one having the problem I could give other recommendations but will like to know what happened first

• Mac OS 10.5 Hello cannot find the printer driver for P1606dn connected via a wired network.

  I tried to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I have connected the priner to my LAN via the Ethernet cables and Switch 8 port NetGear.  I then properly installed printer driver from the CD provided on the Mac and went into system preferences / Print & Fax to add the printer to the list of the connected printers.  Click on the button «+»  The HP P106dn was listed in the table (kind = Hello).

  I chose this entry in the table, and the dialog box immediately went into action: the pullodwn "to Print using" listed the message 'Please select a printer or driver model' greyed and a spinning wheel called 'Search for new drivers' appeared underneath.  The dialog box search but never find the printer driver (I waited for 20 minutes without success).  I installed some other HP printers in this way on this machine with no problems, for example, HP Color Laserjet 2605dn.  Why this method does not work with this printer?

  I was able to connect to this printer with other (Intel) Macs in my house through this arrangement of LAN.  Is the printer driver for the Intel Macs only?

  I disconnected the printer from the local network and connected directly to my Mac with a USB cable.  The same process, and I was able to connect to this printer.  Successfully print a document page.  Although it gives me a work-around for Mac G5, I need to share this printer with other Macs in my household.

  I went on the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on Mac and repeat the steps for the arrangement of LAN (above) complete the connection via the Print & Fax dialog box.  The result was the same: spinning wheel looking for a printer driver are not.

  I don't know what else to do, or why this facility will not work.  I would much appreciate it if someone could give an explanation for this or any suggestions as to what can be done?

  Ed

  I'm sorry to get back to you on this so late.  I was OOT Sunday all day.

  Ok. So, here is what happened.  As I mentioned at the end of my last post, I was in the process of resetting my printing system, repair disk permissions, then restarting.   Reset the printing system wiped out all my printers in the "Printers" pane in the "Print & Fax" system preferences dialog window  I moved forward and fix permissions of the drive on my system disk.  A number of authorities have been repaired, but nothing that I could decipher impression related ro.  Finally, I restarted my Mac and went directly to the dialog box print & Telec.

  As the printers pane was still empty, I'm gone before adding the simplest of my printers (LaserWriter 360 connected via AppleTalk) who has always been correctly added to the list printers in the past.  No chance!  WAITED a few minutes everything is was "Looking for new drivers.".  I tried the Color Laserjet 2605dn.  No luck.  Then the Laserjet P1606dn.  No luck.

  Thus, this way of solution did not work, and now I was without any driver associated with one of my connected printers.  I decided that I had no choice to rebuild the operating system.  I started my DVD of Installation OS 10.5.4 to rebuild my system (without reformatting my HARD drive).  Once which was finished, I've immediately went to the Print & Fax dialog box and tried to add in each of my printers.  In a few seconds the LaserWriter was added successfully, then the HP Color Laserjet 2605dn, and FINALLY, the Laserjet P1606dn.  Thus, it appeared that my upgrade to OS 10.5.8 was at the origin of the problem.

  I proceed with Sofware Update to restore the computer to OS 10.5.8 and again once, went to the dialog box Print & Fax to experiment with the addition of each of the printers again.  Stopping before the acceptance of each 'Add', I could find quickly and successfully the drivers for each of the connected printers.  So, it doesn't seem to be a problem with OS 10.5.8 find printer drivers.

  After reflection, I concluded that the problem must have appeared during the upgrade to OS 10.4.11 OS 10.5.4, but it remained hidden until I tried to add these new printers to the list of printers.

  I appreciate the reference to the last download Laserjet full feature software.   Since I was able to solve the problem without it, I mind not do the download.

  I want to thank you for patiently stay with me during the last two weeks, your advice and comments.  Just having someone to "talk" about it, it was reassuring and useful that I went along to apply each suggestion to the problem.  I tried to solve this problem several times on my own before that, the search of the forums, and I hesitated to participate actively – to reach out.  I'm feeling very different about it now.  Once again, thanks a lot.

• P1102w - cannot find the printer

  Hello

  I'm unable to print using a wireless connection.

  the printer is p1102w.

  operating system is MAC OS 10.10 Yosemite

  Whenever I try to print something I get "printer is not connected / cannot find the printer" message.

  I tried the solutions on your support site, but nothing helped.

  For sure, printer is connected to the same network as the computer. I see it on the print configuration page and I can connect to its IP address via a web browser (but I can't use web services).

  All software and drivers are up to date. Update Apple is nothing new to me. Niether have your site.

  I tried to move the printer closer and further away from router. No results.

  No web proxy is related to my network.

  To make this work, I have to remove the printer from my system, reinstall it using the USB cable, and then add it again via wi - fi.

  But some time the problem reappears.

  It's really frustrating. Help, please.

  Hi @xopot ,

  I see that you have problems printing via wireless network. I would like to help you today.

  Since you can access the printer embedded Web server, the printer would have a valid IP address. Most likely, it has something to do with the software that the printer uses.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  

  

  Configure a static IP address for the printer.

  The printer is not found during Installation wireless.

  Do not take into account the title. Select the Solution 4: assign your printer a static IP address.

  If you need help, let me know.

  Have a great day!
  Thank you.

• HP Envy 5530: HP ENVY 5530 "cannot find the printer"... impossible to see where I am going wrong!

  Hello

  We just put a HP Envy 5530, set up was fine, I tried installing but get the message "cannot find printer" over and over again.

  I tried to download printing HP and Scan doctor but also, it does not find the printer.

  I ran two reports of diagnoses on the printer, everything looks ok, I have an IP address with an IP address that suggest that it has connected wirelessely, the network report said no problems were discovered.

  I tried disabling my firewall, all made once again, still nothing.

  I put the IP address in the address bar, but it does not open!

  I don't seem to have a printer/USB cable witht the printer so I can't tey wireless - I one of them, it was a new purchase?

  I don't really have an idea what to do next, it seems I have a printer connected to the network, your laptop to talk to the network but nothing to talk with each other. I also tried to find the printer with my IPad, but he also could not find a printer.

  Any ideas, im really frustrated

  Thanks in advance

  Hello

  They are on the same Beach, they should be. Now please reset it and try again

  1 reset the printer

  b press settings (wrench),

  (b) press tools then use the arrorw down to access page 2/3,

  (c) touch Restore Factory Defaults - wait a few minutes

  2 reinstall the printer

  (a) you can use the CD, but it will download the file and may take ages to download. Please download the software and the following drivers

  http://ftp.HP.com/pub/softlib/software12/COL47810/MP-115828-6/EN5530_198.exe

  (b) turn on the printer,

  (c) right click on the downloaded file and select run as administrator.

  d select Wireless and then follow the instructions on the screen.

  Kind regards.

• Got paper stuck in the printer and now will only print proofs. How to reset the printer

  Got paper stuck in the printer and now will only print proofs. How to reset the printer

  It looks like you may have some saved jobs in your queue that need to be removed.

  Here's how:

  To clear the print queue, stop the print spooler service and delete all the jobs/print pending.
     
  You cannot delete all print jobs in the queue so that the Print Spooler Service is running.
        
  To stop the Print Spooler Service, click Start, run and enter in the box:
         
  services.msc
         
  Click OK to open the Services Applet.
         
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
     
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
     
  If the "Startup type" is not set to "Automatic", set the "Startup type" to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service immediately.  You must remove all print jobs backed up first...
     
  Then, delete all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send the to the printer again.
     
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
     
  C:\WINDOWS\system32\spool\PRINTERS
         
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
         
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
     
  After the reboot, check again the Spooler Service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• I have a hp color laserjet 2840, I can't print with my Dell pc windows7

  I have a hp color laserjet 2840, I can't print with my pc dell with windows 7. Please help me. Thank you

  badedo,

  This laser model was for XP. There is limited support driver for WIN7.

  Just click on the link, select either the WIN7 32-bit or 64-bit and read the support documents to understand how to install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=445197&lang=en&cc=CA&prodTypeId=18972&prodSeriesId=445194&TaskID=135