Canvio Basic HDD - light flashes then stops

Similar Questions

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Toshiba Canvio basic 500 GB its suddenly stopped working

  Toshiba CANVIO 500 GB V63700-A BASIC
  I (full) support for 2012 and used, it can time.

  Now, it has suddenly stopped appear on my PC, sometimes showing message saying "device not recognized".
  About 2 months ago I bought a new PC with windows 8 (previously 7).

  All others under a new external storage devices works fine
  I also have 593400-a 500 GB 08/11 that work very well.
  also DTP110 1 TB 07/13 and DTP110 1 to 07/14, plus 3 more other make also works very well.

  Thanks for your help and advice

  Each HARD disk belongs to "wear".
  What does that mean? Well, sooner or later each HARD drive is going to die... and in most cases, these questions appear suddenly and are surprising.

  This HARD drive is a device of simple plug ' n play... This means that you have to connect it to the USB port and it should work...
  If this is not the case, the unit may malfunction and usually it is not repairable.

• White screen Y50 - 70, HDD light flashes once every 3-4 seconds

  After I restarted my computer to complete an update of Microsoft, the HARD drive light started flashing, with no splash screen.

  I opened the laptop, removed the battery, no change in the symptom: white screen, keyboard is turned on, the fans are on the HARD disc, flashing light. Tried the routine of button to be able to hold several times, with nothing doesn't.

  This laptop was deposited in a trust PC shop this afternoon. Will update this as soon as I know more.

  Replacement of motherboard resolved the problem. Would like to know the root cause of this failure. The heat? No luck?

• Toshiba Canvio Basics 1 TB hard work do not

  Hi all

  I bought a 1 TB Canvio Officeworks HDD Basics about 6 months ago, and it has been wayward more or less his entire life.

  The USB connection is not and has never worked properly and was recently completely died on me, which means I can access is more data on the device.

  I intend to pay, but I'd like my data on it.
  Contact Toshiba?

  I tried to email them, but I can't work that the serial and model numbers are on this subject.
  Also, I do not have the box, the drive came in or the original receipt would be this question if I am trying to return it?

  I am sure that it is still in warranty and whatnot.

  Any help would be great,

  Louis

  > USB connection is not and has never worked properly and was recently completely died on me, which means I can access is more data on the device.

  I googled for the 1 TB Canvio Basics HDD and it seems that this external HARD disk supports USB 3.0
  The USB 3.0 standard generally provide 900mA power. The USB 2.0 standard provides power of 500mA.
  If you have problems using USB 3.0 as part of a USB 2.0 device, I recommend you connect the HARD drive to 2 ports USB 2.0 USB with USB Y cable.

  But if the HARD drive does not work in different USB ports (also connected to two USB ports) and then the HARD drive may be defective.

  If the warranty is valid, the device can be fixed / replaced in warranty conditions. Of course you need a proof of purchase (receipt or something like that)

  But to my knowledge such guaranteed conditions don t include the process of data recovery.
  So in the event of disk failure HARD, the data is lost. :(

  If you wish, you can check date get offers:
  http://www.Toshiba.EU/services/data-recovery/

  But as far as I know if you have not purchased this service before the disk fails, the rescue date procedure can be a very costly affair.

• notification light won't stop flashing!

  My notification light keeps flashing green. I have no new notification and I went through all the programs that I get notifications and the turned off and it still continues to blink when the screen is off. Please help, as this is slightly drain my battery.

  Seems to be a bug that will disappear once the phone is power cycled that occurs when an application generates a notification 'in progress', like a weather app.

  Basically, if an app puts a notification in the left side of the bar notification, it can cause light flashes power cycling the phone will stop it but it can return.

• Problem starting Portege 7200 - stops running and the light flashes

  I have a portege 7200 with the docker dock 2 dvd, no problems until this weekend, when it stopped starting.

  its plugged into the power outlet and it starts the first windows 98 after the screen time, works my virus checker then the screen goes black, computer stops and the led on flashes.

  ive tried to boot from a CD, using the battery, reinstall windows, all I can think about

  Thanks for your help.

  Hello

  Have you tried to run the notebook without the docking station?
  If this isn't the case, then try it.
  Also, try to remove the battery for a while. Then try to start the unit only with the power adapter.

  But generally, if the LED flashes then this means that there is a hardware malfunction.
  The flash code can only be read by the authorized service partner. Guys are able to find the hardware failure.
  Well well, in this case, if the procedures described above don? help I recommend you contact Toshiba service partner in your country.

  Good luck

• Ext. HDD Toshiba Canvio Basics. This disk is used inside?

  Hello!

  Ext. HDD Toshiba Canvio Basics. What hard drives used inside?

  I guess that's a common 2.5 "SATA HDD.

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

  My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

  * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

  Hello

  If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

  If it is under warranty, contact a local reputable computer repair workshop

• Battery light flashes orange 4 times and then flashing 1 blue lites, this continues if the notebook is on or off

  On the front of my Inspiron 1525 laptop, lite installation battery light flashes 4 orange, then flashing 1 blue, this continues if the laptop is turned off or if it's on.  I need to replace?

  Hello

  Check with the technical support Dell, their online documentation and drivers, and their forums for more information
  information.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ==========================================================

  These are mostly for more information and can really help the question you have.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Canvio Basic 2 TB suddenly stopped working after Xbox update?

  While to say that the title of the hard drive has stopped working once an update has taken place on the Xbox one a few days ago.

  Now I tried it on a different Xbox one (didn't read), and also tried on a computer laptop windows 10 has yet no chance, at first he tried to install it but only got up then stopped, but even after having passed, still nothing, now its there if I go to device management (depending on whether its fine) but I can not even open the hard drive itself.

  I've had it for about 6 months maybe a little more, but still is it safe, placed just behind the xbox connected, never needed to move it.

  I hope someone can help or suggest something, but im now puzzled.

  Thanks in advance.

  I have the exact same problem mate

• Satellite Pro 6100 does not start - power light flashes

  Hello

  I have a Satellite Pro 6100 when I press the power button and HDD lights up briefly then powerlight blinks.
  It seems to Flash a pattern: on (2 sec) flashes (2 seconds) then off (about 8 times)

  What he told me? No fan, no display no hardrive is active.
  Food is ok because it load battery.
  I bought it as it would be something easy to fix ideas?

  Hello

  It sounds bad
  Generally, the power led will blink due to a malfunction of the equipment.
  The LED provides a microcode and only the technician can read this code.
  A common user is not able to read.

  Maybe you'll be able to read this code, but you won't find any description about the meaning of the code.
  I recommend you contact the technician in your country

  But try this:
  Remove the battery and unplug the AC adapter.
  Wait severla times and then plug in the battery and plug in the AC adapter.
  If this does not help, you have aks, a complementary technician...

• Satellite A665-11z starts to load then stops randomly

  Hi all

  I bought this second hand Toshiba A665-11z to see that when I'm connected to the PSU, the dough starts to load and then stops randomly load... after a few seconds he could come back, and sometimes it just stops loading completely.

  When this is the case of the power button turns off, as well as on top of the touch pad.

  The lights on the front of the laptop navigate whites for POWER supply, off for walking and pink flashes for the battery. The backlit keyboard turns off too and will not continue until the load is back.

  Once I started typing this post he disconnected fresh form, I reconnected it and now it is not happened again.

  The original operating system was Windows Home Edition premium 32-bit, but this lappy is bundled with 4 GB of RAM so the previous owner installed a licensed version of WIn 7 Ultimate 64 bit.

  I've updated all the drivers and BIOS is 2.20

  Help please

  Hello

  > I've updated all the drivers and BIOS is 2.20

  There is a new BIOS 2.40, which must be updated
  I read in some forum discussions that it is the key to resolve this annoying problem load!

  Your comments would be appreciated!

• How to change the Canvio Basics for backup and delete backup files?

  I installed the drive HARD Canvio Basics HDTB305EK3AA to do a weekly backup.
  After a few weeks, he stopped to save because there is no free memory.
  the first backup took 300GB and after several backups fill all memory.

  1. How can I reprogram the backup and change the folders of the backup?
  2. how to remove backup files without harming the internal programs of the HARD drive?
  3. all files in backup does not have the name of the original file and it is difficult to manage, can we change it?
  4. in the case of Troubé - how can I use the backuo to restore the data on my PC?

  Thank you
  zipim

  The Canvio Basic one a common external USB 2.5 "HDD.
  You can delete folders or files or format the HARD drive as with other external hard drives...