Cartridge HP 1350 Jam/Incompatible transport

Similar Questions

• Photosmart 5520. Jam of transport

  I just bought this printer this week because by old man is dead.  It worked fine in the configuration process.  This morning, I got the airprint feature works and printed a photo from my iphone.  When the draw was made the printer makes a ratcheting noise effect and then I got an error message "jam of transport."  I turned off the printer and follow the instructions in the transport jam release.  When I turned on the printer back, first of all, I got a message indicating 'Abnormal termination' when off, he returned to «Transport jam»  I tried everything listed on this site.  I unplugged the printer, I plugged it in the wall, I removed the ink cartridges and reinstalled them.  The only thing I have not tried putting in new ink cartridges so there is always Setup cartridges in the printer.  At this point, I'm frustrated and want to through it out the window.

  This is the document that was used to fix the carriage jam? If you followed the document until the end of the procedure;  I would call into HP total care. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:

  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

  Or, if all the steps have been completed, we could get a replacement from the store according to the third party provider return policies. I hope this helps.

• Jam of transport

  I received a fax and then I had a paper jam. After that, I had a carriage jam. It is stuck to the right. I need my problem fixed soon. Thank you!

  Hi again!

  Here are some Troubleshooting paper jam for your printer, and here are the transport jam solutions.

  If your most recent error message involves a carriage jam, I suggest starting with the jam of transport document. Let me know if this helps you solve the problem.

  Thank you for contacting HP,

• HP ENVY 4500: Jam of transport

  Hello

  My Hp envy 4500 printer keeps 'jam of transport. " There is no visible sign when I opened the cover, and I don't know what to do. I really need to fix to print my homework of girls today.

  Thank you

  Hi @DeanPhillips,

  Welcome to the Forums of HP Support!

  I understand that you are unable to get rid of the 'jam transport' message on your HP ENVY 4500 printer. I will definitely do my best to help you.

  I would like to try the steps in this guide, a Message appears 'transport Jam' HP ENVY 4500 e-all-in-one HP Deskjet Ink Advantage e-all-in-one 3540 Printer series.

  This document will help you determine if there is an obstruction causing the carriage jam message, or if there is a mechanical failure in the printer.

  • If these steps solved the problem and the page print test, you can stop troubleshooting.

• Jam of transport on C7180 all-in-One

  I had an all-in-one operation until I tried to remove a paper jam.  After removing most of the paper to the back by following the instructions, I noticed a few pieces under one of the rolls and had to use a pair of tweezers to remove from the front. I am stil a message 'clear jam of transport' and the printer does not stop correctly. Before that, the only snafu was that the printer would not always print "fast draft" of some Web sites.

  So far, I tried to disonnecting the printer and insepecting of the front and back. I can't see scraps of paper inside. Any ideas on something else I could try?

  Denny

  Success!

  To this document, has been the key. On one of the steps, I saw the carriage freely return movement to the left and then dock on the right. I moved and then gently it leaves and voila a piece quickly to the top of the paper became visible. I would have NEVER been able to find it without moving its position anchored to the right carriage return.

  http://support.HP.com/us-en/document/c00042632

• HP all-in-one C310 with a message "clear jam of transport."

  I have a C310 with a message "clear jam of transport."  I followed all the instructions on the website of HP, but get the same message.  The transport is really moving, so I don't understand why I get this message and how to fix!

  Did you check with a flashlight inside the printer if ensure there is no small paper completely left or all the way inside the printer?  The transport may be able to move, but if she can't move along the transport route, then it will produce a carriage jam error.

  There is also a document with the steps to resolve this error, but I see that you say you've done most of them, which can be found here.

  If you perform all of the troubleshooting steps, and the error will not disappear, then the next step will be the replacement of the product.  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• I have a HP Photosmart C5280 printer that has a jam of transport.

  The transport on this printer C5280 is blocked.  It seems to be very close to its place natural resing, but not altogether and do not manually move in both directions.  The machine also will turn off.  I unplugged the power to judge so that he can reset and nothing changes.  Any ideas?

  Hi jimdykstra,

  I see that you are having problems with your carriage of the printer.  I'll take a look at the document below.

  Jam of transport

  Let me know how it goes.

• HP Envy 5534: Improper shutdown, cartridge delivers, paper jams

  I tried to print something, and I put the paper in (which was already very slightly bent) and you press on print. While it was printing, all of a sudden unusual noise you could hear then I pressed "Cancel" and the warning that "there is a paper jam it' came.

  I lifted the door to cartridges that come after the door to scan and went out the paper, the paper had a few small holes in it and has been ruffled. Then I tried to print with another, less wrinkled paper and he said ' the following ink cartridges need to be replaced: HABs. I thought it was a mistake, so I tried to take the cartridge out and put back in. He also said that there was an obstruction or jam, he asked me to move the cartridges along the metal tube that they were on and moving back again in the animation. Place the cartridges were certainly in the clasp evenly in a good way, and the cartridges that I returned permanently to the extreme right were he went into a slot. There was a sticky white substance on the tube, so I cleaned it with tissue paper. I tried again, he says a 'transport' or something was unable to move. All the time the printer came with messages such as 'incompatible with the printer' among others.

  I also looked into the mouthpiece with the pinching mechanism that reveals jams paper, to see if there was something that I had missed and he was not.

  So, I tried to move the cartridges again, this time with the printer off, that he had instructed the animation (and I didn't realize to make), and when I turned on it even once, he warned ' improper shutdown. Press the button 'walk' to avoid damage ', so I did. Now I don't know what to do.

  Please help, I know you massively! The printer is my source of life.

  There has been no recent software or driver changes. My internet connection is wireless.

  Thank you very much.

  The removal of lubrication is probably not a big deal, I wouldn't be able to replace at this stage.  Too much lubricant on the stem of transport can attract dust and paper fibres.  If at any time given the squeeks of transport when it moves from one side to the other, I suggest to post back here with a new topic and ask for advise.  Just a very small amount of lubricant, probably, it will be very good for the life of the printer.

• Want 4500: Jam of transport (for no reason)

  I have had this desire of 4500 for about 18 months and has never had a single problem.  The other day, I'm going to do a photo paper print job, then I start to get a transport error Jam.  I carefully check transportation and ensured in that there is no obstacle, basically quite HP on instruction for transportation jams, and everything is in working order.  Once the error clears, the cartridges move to the left and right without any problem stopping on the left side of the printer and the error comes back.

  I repeat: IT IS No. OBSTRUCTIONS or JAM in THE PRINTER.

  There is NO visible reason why should I get a carriage jam error... especially when the carriage moves very well on its own.

  Edit: I read through other posts with people having the same problem but I have not found a single viable 'solution'.

  Is seems not to be a problem with the accumulation of aerosols or other problems that the cleaning cart broadband would solve.  I don't have any other ideas but ask one of HP support officers rush in this one.

• OfficeJet Pro 8500 "jam of transport."

  New all-in-one.  During the implementation of a carriage jam error rises and said to open the carriage door, remove the Jam (that I can't see or find) then press ok.  With the help of 20 lb paper weight.  The transport does not seem to be stuck as it comes and goes from left to right.  Tried everything to implement!  Any suggestions?

  Hi lp.

  Open the upper part of the printer and make sure that the arm that holds in the cartridges is broken down.

• HP ENVY 4502: jam of transport

  My printer has started "Squeak" when preparing print recently.  Today, it stops at halfway through printing a page and I get a message that there is a carriage jam, I should clear the obstruction.   I can't find any obstruction. Then I got another message saying that cartridges could not move.   Can anyone help please?

  Hello

  Please click HERE to access the procedure which should solve the problem.

  If the issue still persits, pease call the HP Technical Support for assistance.

  If you are in the United States, toll-free # is 1-800-474-6836

• HP Photosmart C6180 - jam of transport

  Hi HP.

  How to clear the transport Jam error?

  Error: "jam transport, door open, door clear carriage and then press ok to continue.

  Now, the printer cannot be used. Please notify. Thank you.

  Follow the steps here:

  http://support.HP.com/us-en/document/c00786043

• 74XL cartridge is reported as incompatible.

  My j6480 all-in-one reports that a 74XL cartridge is incompatible.  How can I clear the wrong error.

  I pulled out and rerinserted, restatarted printer cartridges and computer.  Something that worked. Problems went away.

• Printer cartridge jam

  I have an error message on my HP Officejet Pro 8500 has said there is a cartridge jam, but I all I can and changed the cartridges and cannot clear the open message. Any ideas - it's really annoying!

  Hello

  Can you please confirm if the message "jam of transport." If so, please follow the below document and check if this solves the problem.

  http://support.HP.com/us-en/document/c02150655

• HP Envy 4500 ~ transport Jam

  I just bought this printer. I'm trying to install it. I'm stuck after installing cartridges. The display shows 'transport Jam. The printer carriage cannot move... "I see no visible obstacles. I have taken the cartridges out and reinstalled several times. I unplugged and plugged the power cord several times for different durations. I'm about to make it. Help, please!

  My son came home and fixed my problem. I had to start him early, and he's got to work. Thanks for your help.