CD drive recognize blank CD

Similar Questions

• Satellite Pro M76E - CD player does not recognize blank CD D:\ is not accessible

  Hello.

  Just recently, my satellite pro m76e ceased to recognize blank CDs. If I stick a CD it recognizes that it is a CD, but if I click, it throws an error message indicating that "D:\ is not accessible. Incorrect function. "I tried the search for driver updates but couldn't find one, and toshiba sites says you don't need additional drivers for the internal CD drives.

  The drive works fine for everything else. It's just empty CD. Any advice would be welcome.

  See you soon. Dan

  Hello

  One question; Why you want to read a blank CD? ?:|
  As you say all the CD and DVD is recognized, but only the blank CD cannot be read.

  Regarding the driversa? ... you're right, the update of the driver is not necessary and is not possible because the Windows operating system uses a clean Microsoft drivers to run the ODD.

  But have you already checked these threads?
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24203&MessageID=88868
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24238

  There are a few proposals of solution that helped solve a similar a? D:\ is not accessible. Incorrect FunctionA? problems with the CD/DVD drive.

• DVD burner does not recognize blank dvd inserted

  DVD burner does not recognize blank dvd inserted into the pc

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 8 does not recognize blank CD or DVD media

  I'm running a dual boot with Windows 7 pro and Windows 8 pro. Windows 8 won't recognize blank CD or DVD into the optical drive but it plays any media in the drive. I have after market software for Blu - ray. Windows 7 has no this question.  If any blank media is inserted in the drive, the system will crash; What is the solution?

  Hi PatrickBrandes,
   
  Welcome to the Windows 8 community!
   
  From your description, I understand that your computer is not able to recognize the CD blank and DVD.

  Just a few questions for a better understandg of the issue.

  (a) any change in the computer before the show?
   
  (b) is the question confined on CDs or DVDs of any particular brand?

  Perform the following methods and check if this is useful:
   
  Method 1:
   
  Run the Troubleshooter of material and check if it works.
   
  Follow the steps to run the Troubleshooter:
   
  a. press Windows + C keys on your keyboard to show the charms.
   
  b. type troubleshooting, and then click solving problems under settings.
   
  c. now, type Hardware Troubleshooter in the search option.
   
  Click the hardware troubleshooter to run the troubleshooter
   
  Method 2:
   
  Follow the steps to uninstall and install the CD/DVD drive
   
  (a) press the window key + X
  (b) among the options, select Device Manager
  (c) make a left click on the CD/DVD drive
  (d) right-click on the CD/DVD drive installed
  (e), click on uninstall
  (f) right click again on the same and click on install
  (g) and then restart the computer
   
  Hope that solves your problem.
   
  Meet us if you encounter any questions no matter what other problem Windows and we will be happy to help you again and try to correct the problem as soon as possible.
   
   
  Good day!

• Recently, I uninstalled Nero 7 Essentials on my computer. Now my drive (D :) no longer works. I tried to install Nero again, but the drive recognize more no disc when I put it.

  Recently, I uninstalled Nero 7 Essentials on my computer.  Now my drive (D :) no longer works.  I tried to install Nero again, but the drive recognize more no disc when I put it.  What should I do to fix this?

  On reboot, Windows should automatically detect the new hardware and install a driver.  Once this done, go to Device Manager and select update.  Or go to the manufacturer of your computer and get an update for the reader.

  http://www.ehow.com/how_7332133_uninstall-DVD-driver.html

• Reads music CDs, but does not recognize blank CD - r

  I have long used Nero or Roxio to burn some CD - Rs without problem. I recently tried to install Exact Audio Copy (EAC), which has worked flawlessly for years on my old computer, but all attempts to plant resulted in the Blue Screen Of Death, so I uninstalled it. I can still play music CDs, but none of the burning (Nero, Roxio, Windows Media Center) programs recognize blank CD - r (and Yes, I always use the same type and brand of CD - R). I also tried the Microsoft Fix It solution center, who acknowledged the problem but no solution offered. Any suggestions?

  Hello

  1. is this Microsoft fix it tool display error message associated with CD/DVD not getting not recognized?

  You can follow the steps below and check if that helps you solve the problem.

  You can temporarily try to remove or uninstall the writing software CD or DVD of third party such as Nero or Roxio installed on the computer and check if you are able to access the CD / DVD. If it works fine, you may need to contact the manufacturer of the software to check if you need to make changes to write to DVD.

  If you have Norton Installed on the computer, you can try disabling the software Norton temporarily to see if it solves the problem. Subsequently reactivate after verification.

  If the previous step fails, then check the condition of the disc on the computer using Manager devices and post back with the details.

  Also check the updated drivers available for the DVD player by visiting the website of the automaker.

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  my dvd player does not recognize blank dvd but also recognize CDs, with files and cd dvd empty

  This might help: http://support.microsoft.com/gp/cd_dvd_drive_problems

• DVD RW drive (e) does not recognize blank CD, music CDs and DVDs

  It has just started the other day, I first tried to download a cd purchased in my library.  Windows Media Player telling me I need to insert a disk.  Then I tried to use a DVD and a blank CD - R disc and the same result.  I tried to update my driver and using microsoft support "your CD or DVD drive cannot read or write media.  again, this does not solve my problem.  Looks like he's trying to read the disc, but never does.  Please give me some advice on how to solve this problem.  Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite L20: drive does not recognize blank CDs - incorrect function

  My CD-RW/DVDR drive works perfectly as a DVD player, but when I insert optical media blank to copy a CD the drive is not automatically recognized by the computer (as it would when a DVD or CD is inserted).

  If I go to "my computer" and double click on the D drive and I get an error message saying "D:\ is not accessible. Incorrect function ".

  Hello

  This behavior is noticed by many users on various forums, and it is obviously not new. If I understand you right reading CD and DVD is not the problem.

  You can create CDs and DVDs using any burning software pre-installed? Does your drive read data self made and CD and DVD movie

• CD player does not recognize blank cd in the drive in win xp.

  my cd drive will read a cd but not recognixe a blank cd

  Hi Edmund,

  I suggest you to run the fixit mentioned in the following Microsoft Link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem persists, try the following, then check.

  1. click on Start , then click RUN.

  2. type REGEDIT.exe in the command prompt and then run, and then press ENTER.

  3. Locate and click the following registry key.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  4. in the component right, if you have UpperFilters, right-click UpperFiltersand then click Remove.

  5. click on Yes to confirm the deletion of the UpperFilters registry entry.

  6. in the right pane, if you LowerFilters, click LowerFilters, and then click Remove.

  7. click on Yes to confirm the deletion of the LowerFilters registry entry.

  8. exit the registry editor and then restart the computer.

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope this information is useful.

• DVD - RAM drive does not recognize blank CD

  When I check the properties of the DVD-RAM drive before inserting a CD, to the title of the record, I find the check box turn on CD on this drive already ticked. After that I insert a blank CD in the drive, DVD - RAM turns to CD. When I double-click on the CD icon, a warning message appears "D:\is is not accessible. Incorrect function ". When I opened the properties with the blank CD in the drive, I see that the box enable CD recording was erased. Not to mention that the screens of CD Free properties 0, use 0. If I once again re-checkmark the box above then CD resumes its normal operation with Windows built-in CD burning software, but continues to display an incorrect number of bytes in the areas of free / used. I installed on my Roxio Drag-to-Dsc computer. Let me emphasize that my DVD player had performed flawlessly with Roxio installed from the beginning. This problem came only recently. Is it possible to disable Roxio without uninstalling the computer?

  Hi Richard,

  You can check if the following is useful.

  Method 1: Run the next Fixit tool to check the issue.

  Your CD or DVD drive cannot read or write media

  Method 2:

  Step 1: Uninstall and reinstall the Device Manager DVD player. Automatically search for updates to the firmware on the manufacturer's Web site.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager.

  c. now, expand the CD-ROM/DVD-ROM drives, click with the right button on the CD-ROM/DVD-ROM drive and click on uninstall.

  d. restart the computer.

  Step 2: Log on to the DVD drive manufacturer's website and install the latest updates from driver\firmware.

  I don't think that there is a way to just disable Roxio. For more help, you can contact Roxio support.

• Carpet * a DVD-RAM UJ-820 s does not recognize blank DVDs

  My laptop recently stopped recognizing blank, or I burned when I put them in the DVD player.
  The drive is a CARPET * a DVD-RAM UJ-820 s and it was working fine until last week when I tried to use the ASHAMPOO Burning software.

  He does not even recognize any MOVIE DVD I put in the drive, but it doesn't seem to have a problem with a music CD, I tried.

  Someone to help they could offer cause I'm running out of space and I really want to delete my files.

  Thank you

  Hello

  It looks a bit like a malfunction of the equipment. Maybe the lens of the drive can not calibrate correctly.

  Another clue;
  Have you tried to delete the upper and lower filter registry entries?
  Try it. Sometimes such procedure can simply bring the reader to life.

  The detailed procedure and description has been published here in the article Microsoft Knowledge base:
  http://support.Microsoft.com/kb/314060/en-us/

  Good luck

• Aspire 7750G cannot recognize blank DVD + rw

  Hello

  I have a aspire 7750 G with a DVD super Multi DL drive. When recently I tried to burn some files on a blank DVD I noticed that my laptop does not recognize the DVD. First I thought that the problem was with the Manager of combustion, so I tried another, but still it does not recognize the DVD. I also tried another blank DVD, but it would not recognize this one either.

  Does anyone knows how to solve my problem? (If I use a DVD not empty there no problems)

  Thank you

  PS Sorry for my bad English

  Hello!

  I knew someone who had the same problem with a desktop PC. It turns out the optical drive was really fussy on the disks were used!

  If the disc you have is a + R or + RW then indicate a-r or RW - or vice versa. Sometimes some brands may not work in your drive too, so you may need to try a few different types to see what works for you!

  If you still cannot operate, the drive itself may be at fault and will need replacement.

• DVD player does not recognize blank DVDs.

  I think that my drive can write to DVDs, but it doesn't even recognize empty (when I go into my computer after burst in, nothing doesn't appear). The disc seems to turn for a few seconds, then stops. He can read the previously empty DVD that had something serious on it by someone else. Research online I found that the problem is very common.
  In the properties of the drive, it says disc SAMSUNG HD160JJ/P and HL-DT-ST DVDROM GDRH10N CD dvd/drive under hardware. I'm pretty sure he can write, but I could be wrong.
  Thank you in advance, I would really like to do something with all my blank CD/DVDs.

  This part of the drive name indicates that your drive is read-only, and cannot write DVD:

  HL-DT-ST DVD-ROM GDRH10N

  If you want to write DVDs, you will need to purchase an optical drive DVD - RW. MS - MVP - Elephant Boy computers - don't panic!

• Laptop does not recognize blank CD/DVDs

  Hello

  I just bought a Dell Precision M2800 (early 2014).

  I can read DVDs and CDs normally but I when I put a CD or blank DVD to burn it, it does not recognize it and says 'Please insert a disc into the DVD drive. I tried many solutions of this forum, but none of them worked for me. I tried burning CDs and DVDs even in other laptops and they have worked perfectly.

  Please tell me what I can do.

  As you have already understood, you have a CD-ROM drive (read-only) and is unable to burn discs. You do not have the option to replace this drive with a DVD - RW drive that will burn the discs.