CD/DVD all of a sudden drive to detect a problem, will not read disks

Similar Questions

• All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen

  All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.

  What should I do?

  Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?

  According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.

• Satellite Pro A100: DVD UJ850 of disk I/O error - will not read disks

  I got a glance at other posts on the site of the people who have had a similar problem and I'm starting to think that my drive is defekt!

  The defective hard drives after extracting audio from a CD to store on my MP3 player. I arrived at almost the end of the CD and the drive started to jump so I took out the cd.
  After that, he would not read the discs and returned the device IO error that others have had.

  First thing I did was install the driver and cleaned the lens. No luck. Then I removed the device in Device Manager and reinstalled windows, still no luck. Then I tried the registery fix. I even removed the drive and put it back in, my same experience if this can sometimes fix things. Still no joy.
  As a last resort, I tried to find the firmware for the drive a Matsu * UJ850, but could ony find another OEM manufacturing of the firmware.

  Firmware is for the toshiba Variant? I have really no idea why he left after the extraction of a CD. He had a very light use and is more than 1 year. If there is a way to repair rather than shell out on a new, one I would welcome suggestions.

  I saw you first posted thread here in the forum on the problems of drive CD/DVD device.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20784
  You solve it? It of the same problem?

  The problem described here sounds a bit like a hardware malfunction. Especially the drive cannot read or write CD or DVD due to the lens of the drive failure.
  But maybe you are a lucky guy and the material is ok

  I noticed that the Sonic software could be responsible or IO errors.
  Remove the software Sonic add it & remove programs, reboot the laptop and clean the registry with CCleaner software recheck player features.

• Samsung cdrw/dvd sm-316 will not read disks

  help with samsung cdrw/dvd sm-316 b, who can not read any type of disc

  Contact technical support Samsuns, read their knowledge base or ask in their forums. And when you do, be more precise that «help with...» »

  This means absolutely nothing.

• DVD / CD-Rom drive will not read disks.

  I don't know if it's a hardware problem or a software problem.

  When I put a disc in, it runs for 1-2 seconds, stops, turns for 1-2 seconds, stops, turns for like 1-2 seconds, stops (model repeats 3 times at once) and then silence.

  After trying several times to put in and taking the disc, it runs at full speed and I knew that it is a success that it's reading the disc to replay the video. But why it fails then back working again constantly. Solution?

  Also, when my computer is in "sleep" and I wake up, disk she could read his way 'sleep' cannot be detected anymore. Solution?

  The drive model is HP DVD Ram UJ8A2.

  I tried all the solutions software. None of them worked. I have actually used a piece of tissue paper to gently clean the DVD / CD lens a few times and now it works fine. I think the lens must attend a gentle cleaning. Resolved issues.

• HP psc2100 series all-in-one: printer was working fine, all of a sudden its impasse on copy and will not be printed said export error

  computer printing problem saying "Error exporting" and printer saying just 1 copy.  I tried troubleshooting on mine, doesn't have the verified maintenance on the printer, but still saying error. Help, please!

  Hi @kelley22,

  Welcome to the HP Forums!

  I see that your HP PSC 2100 printer is stuck on copy and will not be printed on Windows 8. I'm happy to help you!

  The first step, I would like to recommend is a hard reset. Please see this message, How to perform a hard reset, by @Rich1. It is very important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. See this article, questions when it is connected to an uninterruptible power supply/Strip/surge protector power, for more information. This is true for printers and ink jet.

  Once this step is finished, please try to print a self-test report, to check the printer hardware is fully functional.

  To print a self-test report, follow these steps:

  • On the product control panel, press Setup.
    The installation menu appears.
  • Press the right arrow ( ) until print report displays and then press OK. The menu print report appears.
  • Press the right arrow ( ) until the self-assessment report and press OK. The self-test report prints.

  If the test report print, then on the computer, please try our HP print and Scan Doctorand let me know what happens!

  Hope this helps and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• CD drive will not read disk

  My CD drive was working fine, then suddenly the door opens, and when I inserted a disc manually (on the computer has read very well just a few hours earlier), I got a message saying that there no disc.

  If the door does not open and must be opened means that one cable to connect the drive to the motherboard or power has failed, or that the drive itself does not.

  "1Garbosk8" wrote in the new message: * e-mail address is removed from the privacy... *

  My CD drive was working fine, then suddenly the door opens, and when I inserted a disc manually (on the computer has read very well just a few hours earlier), I got a message saying that there no disc.

• Dimension 4550 DVD-ROM and DVD-RAM will not read disks

  My daughter has a Dimension 4550. The engraver has recently left working, so we replaced it with a Lite-On DH-20A4P-08 DVD - RAM drive. We played a couple of moview and a CD on the new drive. Today the old DVD-ROM new DVD-RAM both refuse to recognize that a disc is in the disc (DVD or CD); He says: no disc in the drive. We have checked the cable connections and updated the driver for the new drive with no luck. We also tried the Dell store without success.

  Any other ideas?

  How to run diagnostics on these discs?

  
  

• My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed."

  Original title: Audio output device

  My audio driver on my laptop Pavilion G6 just stopped working all of a sudden. It shows "audio output device not installed." Any idea on how to fix it?

  Hello

  See if that helps you.

  Do a system restore to a date before you had this problem:

  "How to make a restore of the system in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/4692-System-Restore-how-do-Windows-8-a.html

  __________________________________________

  Or go to the website of the manufacturer of your laptop > looking for drivers and downloads Section > equip your laptop model number > find your operating system > download and install the drivers etc you will find Audio.

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Also read this information from Microsoft and follow the steps there.

  'No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See you soon.

• Toshiba cd/dvd drive will not read or eject or anything like that!

  Cd/dvd driver for my Toshiba laptop will not work. It lasted about a year, then he became gradually sporadic to read/write or ejection and by last winter, he stopped all together. I've uninstalled and reinstalled the drivers for it, and in Device Manager, it says that the device is functioning normally; every once in a blue moon it will suddenly eject, but then if you put something in nothing happens, even not with the original disks. With the repair utility, it says something like unreadable media, at best. I'm a little confused as to what is happening here, so, what steps should I take to verify if it is indeed the drive disc or something in the software?

  Thanks, Bruce

  Hello

  You may need to check with Toshiba Support, documentation online & drivers and their forums
  for problems known.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  --------------------------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Combo CDR/DVD SDR2102 drive will not read CDs or DVDs

  Hello

  I have a mobile Ergo Elite 4.
  The hard drive crashed and I bought a new one.
  I have loaded windows XP by using a boot disk but cannot get the Toshiba SDR2102 CDR/DVD combo drive to work. I had to load windows on via USB
  using a USB port.

  I can see the drive in windows Explorer, but it will not read the CD or DVD.
  I looked in the Device Manager, and it came with no warning mark.
  I tried deleteting, re-startup and he's back in the Device Manager.

  I'm trying to find a better driver, but it says that I use the best driver.
  I tried various Web sites using sand everywhere tells me that I do not need a driver for this drive.
  What I do, it seems as if the Combo driver is recognized but it will not be read whatever it is inserted, he said only: insert the disc.

  Does anyone know what I can try? or know where I can get drivers for it or software to test the drive?

  any help would be appreciated. :-(
  Some.

  Hello

  You n t need a special driver for the CD/DVD drive.
  CD/DVD players use the current Microsoft drivers already contained in the Windows operating system.

  In my opinion, you should first test different types of media. Please note that not all CD or DVD s are compatible. Distribute readers can't handle bad quality mediums.

  But we shouldn't t rule out a risk of hardware malfunction.
  Disk failure and you may wish to contact your dealer for a replacement.

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media

• My E drive will not read the DVD-RW/DVD-ROM

  So here is the problem
  I have a vista Home premium 32-bit with sp1 computer laptop
  who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
  but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

  I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
  the CD turns, stops, turns, makes a strong ' loading ', but stops then
  nothing happenes
  I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

  Help, please

  Hello, tyINtrouble

  The device is listed as a DVD player?

  You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

  You can also check your connections are secure.

  If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

  If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Optical drive will not read anything else professional films

  So, I am owner of a 2012 MacBook Pro 13 ". The computer comes with Intel Core i7 processor and has the maximum of 8 GB of Ram. The problem is that the optical drive that is built into the computer will read nothing else done professionally movies. It can read disks of movies like the Lord of the rings and Wargames, to name a few, I tested, but it will not read any DVD-R disc or to a CD. I tried the CDs as Metallica music... And Justice for all after try in another computer and a radio and get good results when it just won't play on my Mac.

  I have had this problem in the past , but at the time the optical drive not read anything at all. This occurred in early December and I fixed it on 20 December. To solve the problem, I went to the Apple Store and they can Reset the P - RAM. The Apple guy he told me to make sure to disable every night. I did this because it's what I did in the past. After that, I was able to play any CD or DVD and burn them. I also tested it every two weeks by playing a DVD in there to check that it still works. But I discovered that it was broken again when tried to insert a DVD-R to burn things on it and the computer only it spun and then ejected it. I've known this current problem since around mid-April.

  I did some research on it and what I have read I believe that I must buy a cleaning disc and run it in my optical drive to clean the lens of the eye out, but I don't understand how I am able to read some disks and not others if that is the problem.

  Can I take it again in the Apple Store and get it looked like or should I buy a cleaning disc and run it through my optical drive, and then decide what to do next? I'm in no hurry to get this problem fixed because my guarantee does not expire until the end of July this year.

  I don't know why you want to put some words in BOLD and a few words in normal font. Frankly I find it a bit annoying when someone does something like that, but oh well... what you could do is to try a cleaning disc (the one with little brushes this topic) or a good breath of air compressed. In addition, some brands of DVD - R Virgin do not work as well as others. I found verbatim to be good, maybe maxell or Taiyo Yuden. Your mileage may vary...

  If this still does not work, feel free to zap the pram x 2-3) and do an smc reset. Shut down the computer, plug power adapter, hold down the left shift, control, option, and button works / stop for about 45 seconds, let go of all of them, then press the power button to restart. If none of this works, then by all means to make a genius bar appointment and bring it in to your local Apple store. Hey, if you have an extended warranty, might as well use it, right?

  Good luck

  JB

• Re: Satellite A210-12U: Mat * a DVD - RAM UJ-8505 will not read discs - error Code 39

  Hello.

  I've had my A210-12U for about five months now, and recently for the past few months I had some problems with the dvd player.

  The thing is that the player will not play all discs, the drive will detect that a disc has been inserted, but it will not read. It happened for about a month but its only recently I really know whats been wrong with it.

  The drive I currently use is a CARPET * A DVD - RAM UJ-8505 ATA

  I scanned the disk for problems with the support toshiba but utility that came with something so I decided to check the drivers.

  Windows Vista gave this Message: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I uninstalled the drivers and drivers on there and installed new ones that I downloaded here on the toshiba site.

  What I really want to know is: is this a problem with the drivers? is it a case that the operating system does not detect the hardware? or is this a situation where I should have the disk fixed on its guarantee?

  was soon Dan

  Hello

  Don t worry buddy I put t think that it s a hardware problem. It looks like a corrupted registry entry and it should be solved easily

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  See also this article from the Toshiba FAQ:
  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  and the Microsoft Knowledge base
  http://support.Microsoft.com/kb/314060/en-us

  Good bye