CD/DVD-Rom does not. (Error code 19)

Title explains it all.

You can check the following registry key? :

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

To the registry for this key, in the right window, in the world is here, under 'Name', a LowerFilters and UpperFilters value?

If so, for UpperFilters and LowerFilters, value which is listed under "data"?

Tags: Windows

Similar Questions

  • CD-ROM/DVD-ROM does not error, is not read/write

    CD-ROM/DVD-ROM does not work. When I insert a disc, that nothing is happening, not auto start and without errors. When I double click on the drive via my computer dvd it says no disc inserted, tried the fix, found whatever it is, said peripheral works properly, the drivers were updated.

    Try to replace the optical drive itself.  They do not last forever.

  • My CD-ROM/DVD-ROM does not work

    My CD-ROM/DVD-ROM does not work.  Manager of devices display a "!" on the Optiarc DVD RW AD - 756 A ATA DEVICE.
    1 device state poster (this device cannot start. (code 10)).
    2 update driver... shows that the best device driver software is already installed.
    3. it is the driver of manufacturing.
    4. I tried the microsoft fix it downloads and it has not solved the problem.

    Hope that enough information... Oh, my computer is computer laptop HP Pavilion G60-231Wm.

    Grateful for any advice...

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite A200 - 23P - mechanic of DVD - rom does not

    I'm sorry for my English in advance this topic! -Thank you

    I have a very big problem with my engraver of DVD (RM).
    I bought SAT A200 - 23P three weeks ago.
    The Win VISTA operating system has been installed. DVD - rom worked well.

    If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

    Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
    It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

    However, if I have installed XP on the second partition, Win Vista does not load :(
    I don't have a second chance for second selection (Vista and XP).
    I now have XP only, even if Vista is on the first partition - I didn't delete it.

    Do you think that the DVD-rom is HW or SW problem?
    I think that, given that the DVD-rom does not in the BIOS - HW error.

    But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

    If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

    PLS help me someone-

    Thank you!

    Hi Michal

    Your question is very strange, I mean the number of CD/DVD drive

    The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

    So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

    My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

    As you see it s not easy to say what's wrong exactly, we can only speculate.

    Now some details about your installation of OS double.

    You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
    This happened to me also. I installed Win XP on my Satellite and could not start Vista.

    The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

    Then I downloaded the tool called Easy BCD.
    This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

    That s it!

  • DVD ROM does not

    Hello! my cd/dvd-rom does not work, it does not play any disc. When I load a disc says please insert disk, what can I do

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

    I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

    Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

    The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

    Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

    Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

    I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

    Thanks for your help!

    I FOUND A SOLUTION!

    Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

    Here is the solution. My system is Windows 64-bit 10.

    Resolution 5: Create a registry subkey
    Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
    Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
    To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
    Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to new, and then click key.
    Type Controller0 and press ENTER.
    Right-click Controller0, point to new, and then click DWORD(32-bit) value.
    Type EnumDevice1 and press ENTER.
    Right-click EnumDevice1, click on change...
    Type 1 in the value data box, and then click OK.
    Exit Registry Editor.

  • My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers.

    My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time.  Every now and then it will be visible and I can use it but 90% of the time it does not exist.  I tried the regedit fix, nothing.  I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM.  I removed, cleaned and reinserted my DVD/ROM drive, but no difference.  I tried everything, except the upgrade to Windows 7... who will be my last resort.

    Hello gargoyle28m,

    If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

    I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

    http://support.Microsoft.com/kb/982116/en-AU

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    See if the information above solves the problem.

    See you soon.

    Mick Murphy - Microsoft partner

  • Laptop Inspiron E1405 media Cntr, CD/DVD-ROM does not recognize DVD

    My CD/DVD-ROM does not recognize when there is a DVD in the drive. I had this problem before, but persistence always overcame the problem, that is, I still put the DVD in over and over again, and then it worked. A week ago, I was able to watch all of a DVD movie, reinserting after about 10 times. But now, it does not recognize a DVD. I tried to roll back the Media Player from v.11 to v.9, but it made no difference. I would appreciate help, like Dell and the India seems unable to help.


  • I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

    It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

    I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

    I tried to get various programs to recognize.  They cannot see the installed media.

    I uninstalled iTunes.

    Please do not give me the answer of cut-and - paste stock; It does not work.

    Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

    Thank you.

    Hello

    Well, if you have tried all the usual bugs try this:

    Make a Restore Point:

    How to create a Vista System Restore Point
    http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    ------------------------------------------------

    Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
    continue.

    Reset.

    Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
    could be at stake.

    =====================================

    Here's the answer, just in case there is something you don't have, and I start up and down.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable
    or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===========================================

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • CD-ROM/DVD-ROM does not.

    Driver software has had a problem when he tried to run. Code 39 problem.

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Hope these helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • DVD Rom does not recognize DVD

    CD/DVD-Rom is not recognize my DVD

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps and happy holidays!

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Yet another DVD-ROM does not

    Hello

    I also have another DVD-ROM doesn't work is no problem. The drive used to work fine until I installed a second drive, replace my CD burner by an engraver of DVD - RAM. The second works very well. I'm used to debug hardware issues but was just lazy for a few months. Today, I put a lot of time to test, read the Forum etc. No luck. My system is a Dimension 8400/Win XP and not work drive is HL-DT-ST DVD - ROM GDR8163B.

    No errors in Device Manager. The drive just keeps asking to insert a disc. Any type of disc does work (audio, cd or dvd), but they work very well with the DVD - RAM drive. Here's what I've done:

    1. Uninstall all of the software (with Add/Remove Programs Win) associated with CD - DVD (Nero, InCD, PowerDVD7, producer of energy, to things, I got with the DVD-RAM).
    2. Tried the first simple ideas found on the forum. Uninstall DVD driver and IDE controller and remove all keys filters upper and lower in the register (as you see below redbook remains). Delete all errors in the registry with CCleaner three times, until there was no error on the left. I noticed there are still entries in the registry for software that I removed (whole folder of Cyberlink stuff is still there). Have you not tried to erase that. An example of windows efficiency unsinstalling of things. You get not just on a Mac. Oops sorry for this comment. Maybe it's the best solution. Buy a Mac, put the DVD-ROM and it should work fine... ; >). I used to do the Mac support and installation of a few years back... Anyway.
    3. Unplug the DVD-RAM drive to keep only the no work in the car.
    4. Do the first four steps of this page: http://www.dellcommunity.com/supportforums/board/message?board.id=dim_cdrom&thread.id=138730
    5. Reconnect the DVD-RAM to run Dell diagnostics from the utility CD (I don't have the utility partition because the main hard drive has been replaced). From the DVD - ROM drive self-test. Seek and reading tests just asked to put a disc in the drive, I tried several times. Like in Windows, nothing is known.
    6. Finally, I even tried to remove redbook.sys file drivers, reboot, Windows successor but the DVD-ROM is not working.

    Now, the only thing I can think is to try the drive in another computer. I'll try that, if I can find a friend who let me open his PC.

    Any other suggestions?

    ----------------------------------------------------
    Filter load order of driver http://www.bustrace.com
    ----------------------------------------------------

    Upper device filter: redbook
    Subject Device: HL-DT-ST DVD-ROM GDR8163B
    The lower filter drivers: no filter drivers lower specified for this device

    Driver name: redbook.sys
    File location: c:\windows\system32\drivers
    Description of the file: Red Book audio filter driver
    File version: 5.1.2600.5512 (xpsp.080413 - 2108) [5.1.2600.5512]
    Product name: Microsoft® Windows® operating system
    Product version: 5.1.2600.5512 [5.1.2600.5512]
    Legal name: Microsoft Corporation

    Message edited by Gib123 on 01/06/2008 18:28

  • On Satellite L500D DVD player does not work - Code 39

    my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

    read here:

    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

  • Satellite Pro 2100: CD-ROM/DVD-ROM is missing - error code 39

    Hi all

    After an unsuccessful attempt to install a key USB TV, my DVD/CDRW drive has disappeared. It still works, I can hear it working, but Windows XP does not know more that the computer has this feature. It also is not upward under 'my computer' more. System Device Manager also tells me there is a problem (code 39), and displays an exclamation point in front of Mat * un UJDA740. What can I do? How can I recover my CD-ROM/DVD-Rom drive?

    Thank you
    SHL

    Hello

    This issue has been described a lot of time in this forum, and the solution has been found.

    Please check this forum announcement:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    I guess that the solution to this Microsoft Web site will help you:
    CD-ROM drive or DVD-ROM seems to be missing
    http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

    or

    http://support.Microsoft.com/default.aspx?scid=kb;en-us;314060

    I hope I could help

  • Satellite A200 DVD-ROM does not work

    I received an error code 39 for my dvd device. The device driver and software are installed ok. I do not have the technical specification, so I don't know what code eror 39 is.

    Hello

    The error code 39 is very similar to error code 31.
    This code is known to me. I saw this question here in the forum from time to time.

    The solution is very easy! remove the upper and lower filter registry ;)!

    I found this Microsoft Knowledge base article that provides the details and the solution:

    Cannot access CD-ROM and Error Message "Code 31" in the device after Manager removed Adaptec Easy CD Creator on your computer
    http://support.Microsoft.com/kb/270008/en-us/

    Please follow the guidelines and the report if you did!

    Good bye

Maybe you are looking for

  • How to remove the disk HARD passwordon Portege R500?

    Hello do you know how to remove the HARD drive password? I know the current password, but if I try to remove it by changing your current password to a blank password, it does not work.It has password always news. Thank you

  • Is it possible to define a control in the form of an array of ring box?

    I would like to have a control panel that I can define the dimension and restrict the value use can enter. I thought about a table of ring for which box I could initialyse the dimension. Is it already possible? any reference to where I might start? T

  • Disable icon numbers in new screws under

    The default behavior for LabVIEW is adding a number of VI auto-increment to the new icons of sub - VI - even creating new shipping methods for a class. Is it possible to disable this option? I never shall keep the number and don't know any regular La

  • I can't get the list of files from the FTP server to my goal of RT

    My VI gets stucked on FTP directory list VI and returns the error after a minute. I tried searching for examples and tutorials FTP but I can't find something that's the same thing with this. Here is my Code snippet. I also download a version of LV13

  • Receiver double emails, except for my hotmail account

    Recent tech remote to help Verizon of my server and correct my (cannot find server) (cannot send or receive messages) problem so I get all my messages, but I just noticed a few days ago I get duplicate except their shape in my hotmail account