Chart of car during the race

How to track an object so that part of the shape follows the object? What I mean by that: I am tracking a flying drone and I want a triangle to follow, but the point of the triangle to follow and the base of the triangle should remain without growth or movement. I'm trying to reproduce a line followed NASCAR. Any help?

Here's what I'm trying to do:

https://www.YouTube.com/watch?v=6Y_ukGDv6hU

Head to 02:21:50 and I'm trying to reproduce the gray triangle next to the car.

I guess you mean this:

You will need to learn Motion tracking, the effect of beam and simple expressions with the pickwhip.

Open the pictures you want to use in the Panel film by double clicking on it in the project Panel
Cut the cards to the part you want to use in the final blow by setting an entry and exit point by using ICT and the Alt/Option key + [and Alt/Option +]
Select the images carved in the project Panel, and then choose file > new Comp from Selected
Add a null value to the timeline
Open the motion tracking workspace
Select your video in the timeline
Move the CTI on the image where you want to begin to see the sharp grey
Select the video layer to the Source of the query in the monitoring panel and Track Motion (this should open the layer panel - if it does not open it manually by double-clicking on the footage in the timeline panel)
Move the tracking box (it is no period but retail tracking) to the car and adjust the area research and size enough car to get a good lead (the default value is much too small for most of the time)
Run the track for the period during which you want the gray thing to point to the car
Check the track to make sure it's good and all the corrections you need to do
Select the value Null as the target in the monitoring panel, then press on apply
Return to the timeline and the comp Panel press U to reveal key images 1 Tracker in images
Move the CTI for the beginning of the timeline, press the k key to jump to the first keyframe of Tracker 1
Add a new solid of the size of the model to the timeline and cut the point by pressing the Alt/Option key +]
Apply effect > generate > beam
The length of the value to 100% and 50% time
Set the start, end, colors and sweetness to get the look you want
Add a chart for the title at the top block and put the anchor in the center of the graph, then cut to the point of the image
Reveal the position property of the image by pressing the letter p
Add an expression to the start Point of the beam by dragging the pickwhip to the position property of the graph
Add an expression for the endpoint of the beam first typing 'p = then "drag the pickwhip to the position property of the Null value.
You can then divide the table and subtract some pixels to the value of Y to move the point of arrival to the top
[Cut the ends of the graph and the layers of beam by moving the ICT at the end of the pointer effect and press Alt/Option +]

You'll get something that looks like this:

The expression of the Position of end of beam modified to increase the end point above that the Null looks like this:

p = thisComp.layer("Null_1_Target").transform.position;

x = p [0];

y = p - 60 [1];

[x, y]

There are many ways to do this effect, but I think it's the easiest.

Tags: After Effects

Similar Questions

Apple Watch freezes during the race

I used my Apple Watch during a 21K run. I used the training software to monitor my heart rate during the race.

After the mark at halfway, the screen dimmed, and the screen froze. (stopped adding distance, and heart rate has been replaced by '-'.)

thinking that it was because of the excessive sweat on the sensors, I tried to wipe the back of the better watch that I have (which is not a lot considering everything that I had on me was wet). by pressing the digital Crown to return the screen to the face of the watch, but whenever I go to the app to drive he would show the same frozen screen.

It is only after a kilometer (about 7 minutes) made the response to training app and worked normally until the end of the race.

for the purposes of the workout on my Apple Watch concerns, I had only run 19,71 km instead of the 21 K who I actually ran.

question: How can I prevent this happening again?

Hello

As a first step, if you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:
- Update the software on your iPhone, iPad or iPod touch - Apple Support iOS
- Update the software on your Apple Watch - Apple Support
It can also help to revive your watch:
- Restart your Apple Watch - Apple Support

Satellite A300 power suddenly goes out during the race for hours

Dear users of the Forum,

I am facing a strange problem in operation.
My laptop Satellite A300 is suddenly down power during the race for hours.
It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

I tried to run only on the power (remove battery) and got the same result.

can anyone identify the problem? can you please give me the solution?

smarjit1

Hello

I put t think it is s virus.
En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

Here is the error

Failure of deployment: Info: request shipment: install and launch
Info: Action: install and launch
News: Native debugging: on
Info: File size: 219949
Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
Info: Treatment 219949 bytes
actual_dname:
actual_id:
actual_version:
result::failure 881 the application author does not match the author token of debugging

The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

Compiling jsx to jsxbin, Palette disappears during the race

Hello world
My ID version is CS5, I added # targetengine "session."
I compile jsx to jsxbin, but the palette disappears during the race.
Anyone can tell me the reason?
Thank you.
Best regards
Goldbridge

You can wrap the content of jsxbin inside app.doScript () routine and add engine target in front of her.

Hope that helps.

--

Marijan (tomaxxi)

http://tomaxxi.com

Cloning no CARS at the RAC?
Hello

Is it true that Oracle doesn't support cloning an instance of single node EBS R12.1 (Non-RAC) to the CARS?
Are there any other supported how do? both using clone quick or manual?

Thank you very much

MsK
Hello

How about corrections?

Make sure you have the latest quick Clone and AutoConfig patches applied on the source instance.

Our source database is 11.1.0.7 and the Pb of the target is also 11.1.0.7. .but there is patches referred to in 802875.1
I have to follow this Note?

If you are already on 11.1.0.7, you need not to apply these fixes.

Kind regards
Hussein

Satellite A50 - goes out of himself during the race

my laptop turns off itself during its operation and am working on it. I already checked the connection ca; even the battery is ok.

Can it be a problem of the cooling module? The fan runs all the time and the laptop gets very hot.
There are solutions to this problem?
It is impossible to work with the laptop that turns off when processing...

Thanks for the suggestions...

Hello

This sounds like an overheating problem.
To my knowledge the operating system can the laptop will stop if the temperature increased at the critical level.

You know that each device preinstalled in the notebook produced heat.
Sometimes more operating devices with maximum performance. The devices run with maximum when performance performance heavyweight like games runs on the laptop.

On my laptop Toshiba power saver determines the method of cooling and the processing speed of the CPU. I think that this is also preinstalled on your laptop. Therefore, you should first check these options.

In addition, you should check your module cooling fans. Sometimes the dust and debris keep the laptop cooling properly.
You must also have sufficient free space around the laptop for cool air circulation.

Changing the duty cycle of PWM on during the race

Hello

I am trying to generate a my C Code PWM signal.

It works fine except for the fact that I can not change the operating factor during execution of the generation of PWM signals.

Here's what I do:
```
//Init DAQmxCreateTask("masterP",&task_pwmout);
DAQmxCreateCOPulseChanFreq(task_pwmout,taskchans1,NULL,DAQmx_Val_Hz , DAQmx_Val_Low , 0.0,freq,duty);
DAQmxCfgImplicitTiming(task_pwmout,DAQmx_Val_ContSamps,1000);
DAQmxStartTask(task_pwmout);

...//Stop DAQmxStopTask(task_pwmout);
```
It works well, but the duty cycle is fixed.

I tried to change the cyclical report but it seems that the only way it works is like this:
```
//Init DAQmxCreateTask("masterP",&task_pwmout);
DAQmxCreateCOPulseChanFreq(task_pwmout,taskchans1,NULL,DAQmx_Val_Hz , DAQmx_Val_Low , 0.0,freq,duty);
DAQmxCfgImplicitTiming(task_pwmout,DAQmx_Val_ContSamps,1000);
DAQmxStartTask(task_pwmout);
...
//Change Duty Cycle DAQmxStopTask(task_pwmout);
DAQmxSetCOPulseDutyCyc(task_pwmout,taskchans1,duty);
DAQmxStartTask(task_pwmout);
...
//Stop DAQmxStopTask(task_pwmout);
```
I have to stop the task, set the new cycle and restart the task.

Unfortunately, it takes some time (~ 100 ms) which means that during this time, the PWM is turned off.

Is there a way to change the smoother operating factor, so there is no gap between?

Thanks in advance.

Christian

Hi Christian,

You are right. Stop a restart of the task is a very slow way to adjust the pulse width. This page describes the option adjust the factor of market during execution by using the function "DAQmxWriteCtrFreqScalar". By calling this function in a loop, after the start of your task, you will be able to adjust the frequency and factor use of your task, simply by changing the settings.

I would like to know if it works for you.

Concerning

Unique constraint during the race error collecting statistics of schema

Hello
I get this error periodically during execution to collect statistics of schema

In GATHER_SCHEMA_STATS , schema_name= ALL percent= 40 degree = 8 internal_flag= NOBACKUP
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated
Unable to correctly update the history table - fnd_stats_hist.
-1 - ORA-00001: unique constraint (APPLSYS.FND_STATS_HIST_U1) violated

I went thru notes 470556.1 , but I have not applied patch 5876047 according to the note.

I can truncate table FND_STATS_HIST? Is it safe to truncate this table?

Thank you
ARS

Published by: user7640966 on January 2, 2011 23:58

Hi Ars;

If I suggest his prod, make sure you have a valid backup of your system and also raise sr and confirm with oracle support. If you are on the clone or test, such as mention of doc first to backup table FND_STATS_HIST (make sure that you have a valid backup), truncate and repeat the test question

Respect of
HELIOS

Why graphic ActiveX lagging during the race?

I work with GRAPHIC trend ActiveX in a compiled Labview application EXE. An acquisition of data acquired datas 77Hz, a sample at a time, a table displays the last 30 minutes. But I see only 5 minutes of screen. After 2 days, start and stop of trends, 2 (constant) values that are saved in activeX as upper and lower limits of the signal, begins to lag. The main signal of data acquisition is OK but 2 constants appear with 15 s delay.

After 1 week, 1 minute lag is observed on the screen of the main signal and 2 minutes on 2 constants.

Why? and how can I fix this problem?

I use 2 loops with queue for the acquisition and treatment. I use the Quad Core CPU with 2 gig of RAM, and Windows Vista.

Hello!

I finally found the problem.

Even if I was using very good machines, 2 three feathers begins trolling after 1 day.

The reason is that these 2 signals was set as an Integer, and the other is a waveform. Basic teas time 3 signals is not the same. We take the timestamps of the DAQ signal. The other two use the time on the computer. It seems that the clock two are not synchronized. I rebuilt a signal using the timestamp for the acquisition of data for integer values, and that's it!

Best regards

Disk Defragmenter stop working during the race

On a Windows XP computer with all the updates, I have tried to run a disk defragmentation, because I checked and he recommended that I should.
It started OK but then got 30% "Moving files OBJECTS. The DATA"and then stopped. The only thing I can do is move the mouse around,
No clicks, no keyboard nothing. I let go now to spend two days with no change.
C: 293 GB with 242 GB of free HDD.
Can I stop and restart? I said if I do bad things can happen. ???????

Hi BruceKujawa,

Restart your computer and try to perform the fragmentation of the disk again and check if it is correctly executed.

How to defragment your disk Volumes in Windows XP

G6-1035tx Pavilion: movies stored in hdd delays during the race

The laptop runs really bad. It takes time to perform any operation (gel does not). The film is running (behavior is rather the buffering online video streaming). Is this driver or a hardware problem. Is there a way to fix this?

My warranty is over so I would also like to know if it will cost you, how will?

Sounds like the hard drive might start to fail and must be replaced. They can usually be bought for $60 - $80 depending on the chosen power. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

Enter the BIOS by typing/holding the F10 key immediately after switching on the laptop. Use Diagnostics to test your hard drive. If you do not have diagnoses in BIOS-try to touch the Ecs key immediately after switching on the laptop. Tap F2 System Diagnostics from the menu.

How to get rid of "PSF" shared by car during the migration of Parallels Desktop?

My VM shows a "psf" shared drive (see the screenshot) and I can't get rid of it, at least not not by deleting.
If I double click on it, I get an error that the file is not found.

Hello

Did you uninstall Parallels tools?

--

Wil

ESXi4 on USB stick can be removed during the race?

ESXi installable, I've extracted and used dd to VMware-VMvisor-big-208167 - x86_64.dd
on a USB key. I'm now boot from it, do some virtual machines, and everything seems to work
fine.
I can remove the USB while
ESXi is in place and reinsert before shutdown or not ESXi or his guests constantly use the USB device?

It runs once per hour just after the hour. The cron task is in/var/spool/cron/crontabs/root

VM backup during the race

I have the stand alone ESX3.5. I want to save the images, while she runs so I run the snapshot and copied the file VMDK virtual machine using VMKFSTOOL - i. It's how to have good image right? or should I use method differerent.
It is therefore I have SQL running on esx and I want to take backup

That's right, that you would take a snapshot on the virtual machine, which allows you to save then the VMDK while all the changes will continue to write in the delta. Once you have finished with the backup, would engage you changes and merging to the main VMDK.

You can take a look at a script that I wrote which can help with this: http://communities.vmware.com/docs/DOC-8760

For the SQL database or other transactional systems of ups, it is recommended that you either turn off or use VSS to ensure that all changes have been emptied on the drive before running the backup otherwise you can get data corruption. VMware VCB and other backup tools can hang in the virtual machine and make a call to vs.

=========================================================================

William Lam

VMware vExpert 2009

Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

http://Twitter.com/lamw

Chart of car during the race

Similar Questions

Maybe you are looking for