Chassis FPGA deployment problem

Similar Questions

• cRIO-9024 + chassis 9113 NOR + NOR 9881 (CANopen) FPGA compile problem

  Hello

  I started to learn the Labview and I want to communicate with CANopen (9881) interface FPGA module, but there is a problem.

  Normally (without NI 9881), I can compile and run a VI file with FPGA interface, BUT after adding 9881 (in the slot1) to the chassis (9113) I can not compile any VI (same same file VI) with worker compilation. Even if I delete the Mod1 (Slot1, NI 9881) of the project, I can compile the file VI.

  I need compile bit files in order to use the library can open, but I could not find the problem.

  Can someone help me? Thank you.

  The error is below to:

  ...

  Analysis of entities.
  Architecture analysis of the entity.
  ERROR: HDLCompiler:849 - "D:\NIFPGA\jobs\g8Q6537_ibm705i\CcMuxSLN.vhd" line 794: Unexpected EOF.
  File VHDL D:\NIFPGA\jobs\g8Q6537_ibm705i\CcMuxSLN.vhd ignored errors

  Hi Matt,

  I uninstalled everything about LabVIEW and reinstalled, I did update, now the problem is solved. It compiles the file bit.

  Thank you.

• OR 7966R - the bitfile deployment problem.

  I've implemented the following

  SMU 1085 three chasiss NOR SMU 7966R FPGA inside.

  I'm connected to a remote host via MXI using an SMU-8381

  I tried to run the NI 5761 - single CLIP.lvproj sample provided with race and LabVIEW examples just to get things to the top.

  and I get the following message if poster on all targets...

  Compilation went well but can't deploy the bitfile...

  Kind regards

  Maciej

  To the hour... so my bad, I forgot to mention one thing in my game to the top.

  I got a sync 6674 t module that is currently seems to be a little tired. Since I don't have the intention to use it then.

  I removed the chassis and things started work very well.

  It seems that it has caused problems.

  Kind regards

  Maciej

• LabVIEW fpga 2012: problems

  Hello

  I'm trying to interface labview fpga to 2012 with Spartan E 500

  I am facing two problem

  a first in the figure below when I try to download Flash memory of Spartan E?

  I run vi on Spartan works well but when I download it the error appear

  also there is no "" "run when loading" "button which are available in a previous version of labview.

  Please help

  

  I don't have a LVFPGA version with the support of 3rd Spartan installed in front of me, so I'm working from memory here, but the option to run the VI on charge moved to the target property page (available on a right click on the target'Properties) of the standard build for the VI (as shown in your own message here)

• two drivers of PXI chassis with Configuration problem

  Hello

  I have two PXI chassis. One is PXI 1033 and works perfectly with the NI PXI-5404, 5105, 6509, 1409, installed 8336. The other is 1036 PXI with the PXI-5404 NI, 8366 installed. When I was trying wreath connect, as master 1033, 1036 as slave, I found several problems.

  1. in the Measurement & Automation Explorer, does not have my good guys in 1033. Instead, there is a sign of the Red Cross in bottom right with 6509, 5105, 5404.

  2. I can't find an another 5404 of the 1036. In fact, I can't find 1036 in MAX.

  Update BIOS. My PXI system is already identified under the name 'NOR PXI - 1033 Embedded MXI Express' and Chassis1 is identified as 'NOR PXI 1033'.

  So I made several tests as below:

  1. unscrew the 5404 1036 slave. MAX can configure 2 1036 chassis. Ok. But when I reconnect 5404 in 1036, same result happened as stated above.

  2 uninstall the driver of 5404, so the 5404 in 1033 does not either now. And then reboot again, same result happens again. Cannot detect the 1033 chassis. Other vouchers in 1036 don't work either.

  Please, any suggestion is highly appreciated.

  Sincerely,

  Bin

  Hi Ben,

  This happens sometimes with MXI-Express:

  Error code 12 with MXI-Express

  http://forums.NI.com/T5/PXI/two-PXI-chassis-connection-with-configuration-problem/m-p/1475876#M9033

  In general, you can read this error 12 means on Device Manager:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  If it was a problem of bandwidth, PCI or PXI side, you could pull a few cards to see if that alleviates the problem, or that the link from Microsoft over the States, you can disable the driver for other cards.

• Module FPGA unzip problem

  I downloaded the FPGA module in a PXI controller, running XP.  When I tried to unzip it, the unzip operation fails every time.  What is the cause?  Is there some sort of requirement for this unpack?  Hard disk size requirement?

  Thanks for help.  I discovered what the problem was.  I downloaded the FPGA module via the link below.  When I tried to unzip it, I would use the default path.  Apparently, the default path is a space at the end of his 2nd record, counting from the end of the path.  It is a small bug in NOR, but it needs to be fixed.  It is difficult to catch, because I don't expect something like that happening.

  https://lumen.NI.com/nicif/us/evallvuser/content.XHTML

• synchronization sequence FPGA structure problem

  Hello

  I use a sequence structure in a VI on the FPGA to a cRIO-9073. The time of each sequence is active is determined the number of times defined by the user. In theory, each sequence should take the same amount of time, but when I check it with an oscilloscope is not the case. The signals produced do not have the same cycle. When the number of ticks is equal to 1 in the VI on the FPGA, I receive a frequency of 400 Hz, approximately to the blockwaves outputs. I expect it is much higher since the FPGA runs at a frequency of 40 MHz clock. Why the frequency of the signals so low and why isn't the market factor the same for all signals?

  Best regards

  Beurms Jasper

  Several of your synchronization on the FPGA screws are set in milliseconds, not ticks; in all cases but cases #2. I hope that this is the problem. Double-click the VI and change the setting. In fact, why have a timer to wait in any case? Just pull it outside the structure of the case and have 1 instance of the VI in the while loop. Also, whenever I see the files named * _ it probably means that you do not use the source code control. I would highly recommend.

• MView delta deploy problem between SDDM schema and db (Swap models target dictionary import) - overview of the DDL generation

  Hello

  I'm having a hard time to reverse the difference between my role model and my fusion database schema.

  The initial goal is simple:

  1 / detect differences in metadata

  2 / I SDDM to generate the DDL change code

  (if possible, if not, recreate, reload: powerful existing featured BTW)

  3 / deploy

  4 / check/confirm that no more delta existing

  I do this:

  * menu file > import > dictionary

  * Select connection

  * Select the db schema

  * check the "Swap target model.

  * Select MY_MVIEW > next (TABLE 1 DB object to import) > finish (work "Generate Design")

  * in the model comparison window, I have to deselect everything, less table MY_MVIEW AND also MY_VIEW Materialized View

  (as they appear as 2 SDDM objects)

  DOF Preview button

  I see:

  -comments created in first place (whereas the MVIEW should be recreated)

  which is smaller but still blurs the legibility

  -MY_MVIEW is systematically recreated

  (how many times already I deploy)

  I figured out:

  . SDDM objects tables (disorders, implemented in the MVIEW form) and host MVIEW (Physics) the query independently

  . even if I sync them manually (copy - paste), DDL deployed code is not strictly identical to

  So it may have to do with a dysfunction compare?

  SDDM is full of options to desensitize compares (physical exclusion, storage, etc.), but I found no way to simply compare and align MVIEWs

  (and the documentation is rare on the subject)

  Any clue?

  THX

  Interesting.  Looks like you're it's partitioning that is causing the problem.

  In a model, partitioning information can be held on the objects of physical model for Tables and materialized views.

  In the case where a Table and materialized views are linked together (by the implementation as a Materialized View on physical model Table property), it is information of partitioning that is held on the Table which is relevant.  The information on the Table is used when generating DDL.  And in an import or synchronize, partitioning information are added to the Table object.

  I think that what is happening in your case probably is your model includes some details of partitioning maintained on the Materialized View object.

  Synchronization is combining the details of your database partition to the Table in the model.

  As it does not associate the details of partition of your database with the materialized view in the model object, the comparison shows a difference for the materialized view:-not partitioned in database, but partitioned in your model.  And this difference is causing the drop and re-create the view materialized in the DDL.

  There are various options to work around this:

  1. you can remove details unnecessary partitioning and maintained on the view materialized in your model object.

  2. you can clear the check box for the entry for materialized views in the tree in the dialog box models to compare before making the DOF preview.  (But it also means that no DDL will be generated for all other differences in these materialized views).

  3. you can use the filter properties to filter the relevant properties (e.g., partitioned, partitioning columns and Subpart columns for Materialized View objects), and then select the button refresh trees before performing the DOF preview.  (See the screenshot below).

  

  David

• Cube deployment problem.

  Hi all

  In fact last Friday I created some members in the Application of EPMA in DEV, TEST, PRO environments, after as I have deployed the Cube Test was successful, but when I deploy in Env Pro so fails, the error log says,

  \\Outline of verification errors:

  \\Member [XXXX] has several copies of the same shared in at least a stored hierarchy member.  See other messages so that members and hierarchies.

  \\Aggregate storage outlines only allow any shared member [XXXX] once in a stored hierarchy, including the prototype.

  \\Aggregate storage outlines only allow any shared member [XXXX] once in a stored hierarchy, including the prototype.

  Stored \\This hierarchy has multiple copies of the same shared member [XXX_XXX_XXX].  Remove the additional members or change the hierarchy in order to be dynamic.

  Can someone guide me to solve the problem.

  Thanks in advance.

  Hello

  Thank you for your answers

  The problem has been resolved, it was with the soft shell, sketch has been corrupted.

  Thank you.

• incomplete deployment problem

  Hi friends,

  I hope you do well!

  I have a problem with weblogic server that when I run a page, it displays a message in the paper like

  weblogic.application.ModuleException: Context path "/ ProjectName-ViewController1-context-root" is already used by the module: projectName-ViewController1-context-root application: projectName_application1

  at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1210)

  at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:970)

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)

  at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:433)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:375)

  Truncated. check the log file full stacktrace

  >

  [19: 13:08] # incomplete deployment.  ####

  [19: 13:08] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  # Cannot run application projectName because of the deployment on IntegratedWebLogicServer error.

  [ProjectName application stopped and cancelled Server Instance IntegratedWebLogicServer]

  When I restart the J-developer then it works very well for a time the same problem when I redeploy repeated...

  Can someone solve my problem?

  Thanks in advance,

  Nanda,

  There is already an application that is deployed using the context root/projectName-ViewController1-context-root. You must delete it. Go to the administration console, deployments, find application deployed using this name and remove it.

  Thank you

• CentOS 6.4 model deployment problem

  Hello.

  Ideploy and customize template CentOS 6.4. I choose Red Hat Linux 6 instead of CentOS 4/5/6 when creating VM basis because the customization option has been disabled during deployment if I chosse CentOS. Now customization options are available, however, after completing the wizard, copy the virtual machine and at the very last step will raise an error "customization of the guest operating system is not available for this configuration... ». Perl and VMware Tools are installed on the base virtual machine which the model has been cloned.

  Please help me solve the problem.

  Thanks in advance.

  Hey, try this:

  http://helpfulit.blogspot.com.es/2012/04/how-to-use-OS-customization-for-CentOS.html

  Look in the comments for alternatives.

• Package CC using SCCM deployment problems.

  Get the following error during package CC Photoshop/InDesign (device based licenses) via SCCM deployment - "Windows cannot open this program because it has been prevented by a software restriction policy".

  Installation fine when I click OK on this error. But at the launch of the shortcut, a window of "Login required" , which should not be the case, as I build packages using approval option in Creative Cloud Packager. There is no problem, when I install these packages manually on the computer, which seems to be a question SCCM as it installs with the SYSTEM account. Exactly don't know what is the cause, struggling to solve it, must deploy to users within the strict chronology.

  Can you please see this and help? Kindly let me know if you need more information on this issue.

  Thanks in advance...

  Have you seen our SCCM deployment guide?

  Using creative cloud | Package from Adobe with SCCM deployment

• JAX - RS Web service-deployment problem

  I am creating a restful Web service in Eclipse EPCO + Weblogic 10.3.6. When you use 'com.sun.jersey.spi.container.servlet.ServletContainer', I have no problem in the deployment and execution of the service. (kept in pots of Jersey in the lib to the application directory).
  
  but when you use 'weblogic.jaxrs.server.portable.servlet.ServletContainer', ranks not found exception during deployment. Can someone tell me what jar has this class that must be available on the classpath?
  
  FYI: I chose weblogic system libraries in the way of the construction and the facet of the JAX - RS project is selected.
  
  Thank you
  A

  This class is only available from WLS 12.1.1.0 "weblogic.jaxrs.server.portable.servlet.ServletContainer" Please check below for weblogic 12 c documentation that supports the two classes
  weblogic.jaxrs.server.portable.servlet.ServletContainer
  com.sun.jersey.spi.container.servlet.ServletContainer
  http://docs.Oracle.com/CD/E24329_01/Web.1211/e24983/configure.htm#RESTF179

  10.3.6 only "com.sun.jersey.spi.container.servlet.ServletContainer" is available.
  http://docs.Oracle.com/CD/E23943_01/Web.1111/e13734/rest.htm#WSADV572

  Kind regards
  Sunil P

• ADF Application - Development Mode deployment problem

  Hi Experts,
  
  I have jdev11.1.1.5.0 in combination with weblogic 10.3.5.
  
  my application works fine, while running on integrated wls (just give a click right and on my page jspx - auto deployment).
  
  If I go with manual deployment of option on same wls integrated or stand-alone wls means
  
  I can able to get my login page, if I have some means of connection he did re - direct to my index page than it would be problem? (it doent replicate this kind of integrated wls (auto deployment))
  
  Details of my Application
  use all adf security. my login page is in extended session bean index page - backing bean of limited scope.
  
  My diary shows, your user name and password is correct. This means that it can have access to my Module of the Application.
  
  use adfc - config to redirect

  <control-flow-rule id="__5">
      <from-activity-id id="__6">loginPage</from-activity-id>
      <control-flow-case id="__7">
        <from-outcome id="__13">error</from-outcome>
        <to-activity-id id="__8">loginPage</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__14">
        <from-outcome id="__16">success</from-outcome>
        <to-activity-id id="__15">Indexpage</to-activity-id>
      </control-flow-case>
    </control-flow-rule>

  This project does not behave like this days Olden.
  
  I scored on the sample for deplying a standlone wls and wls adf application built-in. It is very good.
  
  can anyone guide me where am?
  
  one has an idea?
  
  so am manual deployment I had dialogue "deployment configuration" to deploy.
  
  I got this in my journal.
  

  [01:07:44 PM] Entering Oracle Deployment Plan Editor
  [01:07:46 PM] No metadata repositories found on target server. Using values found in adf-config.xml. //show this red collor

  User707, can you on which you deploy the application? It is a stand-alone server or server that comes with jdev?
  Question: can you post the url that you use to launch the application on the server? The url contains ".jspx" as part of it?
  If Yes, try to remove the ".jspx" out of the url.

  Timo

• Deployment problem. in Oracle 11g - Jdeveloper 11.1.1.4

  Hi all
  
  I created an Application Server connection and tested and got all 9 successful tests.
  
  When I try to deploy my bpel program...
  I right-click on the bpel project and select deploy, I dnt get any existing connection to deploy. I just get the name of proj once more.
  
  Usually, it takes get tat area in which we need to deploy. Here I HAV not these options.
  
  After the creation of the connection to the application server, hw I could connect to the bpel proj...
  
  My console works fine however.
  
  Kindly help me to solve this problem. Thanks in advance.
  
  Kind regards
  Sabarisri. N

  How to start this soa_infra. SHD, I do this 'Control' of my console soa_infra tab?

  First, go to the tab target of soa-infra and make sure that it is targeted toward Server SOA. Then go to the tab control and try to start it. If a mistake happens, post it here.

  Kind regards
  Anuj