Checking permissions OS6 failing Simulator

Similar Questions

• RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to the/tmp file

  Hi, I'm under RapidWiz 12.2.0.50 to make a R12.2 installation on a platform for x 86-64 Oracle Linux 7.1.

  I get the error message

  RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to /tmp/11061511/lab3_DEMO1_db.xml file

  However I've looked at what my directory/tmp is completely open (wise authorization), as well as the subdirectory 11061511 under

  lab3-nms: / > ls - al

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22 tmp

  lab3-nms: / tmp > ls - al

  Total 16

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22.

  drwxrwxrwx. 19 root root 4096 Nov 6 14:19...

  drwxrwxrwx 2 root root 25 Nov 15:11 6 11061511

  drwxrwxrwx. 2 root root 19 6 Nov 14:18 .esd-0

  drwxrwxrwx. 2 root root 6-9 Oct 23:16 current unix

  drwxrwxrwx. 2 root root 17 6 Nov 15:11 hsperfdata_root

  drwxrwxrwx. 2 root root 14:18 Nov 94 6. ICE-unix

  drwxrwxrwx 2 root root 23 6 Nov 14:18 ssh-KQeDztQLkQHj

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-OgJMdJ

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-S5pkDq

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-x5Iry2

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. Test-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 0-lock

  drwxrwxrwx. 2 root root 24 6 Nov 14:18. X 11-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 1-lock

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. XIM-unix

  lab3-nms: / tmp/11061511 > ls - al

  Total 16

  drwxrwxrwx 2 root root 25 Nov 15:11 6.

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22...

  -rwxrwxrwx 1 root root 8529 6 Nov 15:22 11061511.log

  any ideas what the permission problem?

  Thank you

  Jim

  Found the problem and it's nothing to do with users, groups, and permissions of files (tmp or anything else besides!)

  The problem was that I had not put the sysconfig according the upgrade installation Notes & R12.2 for Linux x 86-64 ( note 1330701.1 )

  I guess the bum steer, which gives install them quick - is indicating that the question is a problem of permission of the files in / tmp, when it is not really!

  The only thing I can think is that it uses sysconfig content to add the name of host or domain, the file name, he tries to put in / tmp.

  hope this helps

  Jim

• How to check permissions

  Hi guys

  I'm developing an application and I am facing some problems.

  The application needs to read SIM data in order to display information according to the country of the SIM card. The first thing it does after opening is read the SIM. If no SIM card is detected an error, if one can read that the app displays a list. I'll get into the details.

  I added in the descriptor bar of permission of "read_cellular_data". When the app opens for the first time, it asks the user for authorization, which is normal. After that the validated user presses, the screen remains black. Reduce to a minimum the application does that visible splash screen. Only, you can close the application.

  After opening the app for the second time, the application works normally.

  Also, when I ask the State of the SIM using 'SimCardInfo () .state (); I'm "NotDetected" If there is no SIM and if the app has no authorization. I would like to know how to tell the difference between these 2.

  My theory is that I need to check for permission, but I can't find any info on the permissions. All I've found is the following pages:

  The App permissions page, which does not describe how to check permissions

  and this post on the forum, that isn't for BB10

  Any help/advice/pointers would be greatly appreciated.

  Pepe

  I have seen that some permissions are not documented (can´t recall now another example).

  But in the SimCardInfo.hpp, you can find it:

  /*!
       * @brief Retrieves the unique identifier for the country where the SIM card's home network
       * is located.
       *
       * @details The mobile country code (MCC) is composed of 3 or 4 decimal digits. For further
       * details about the structure of the MCC, see ITU-T recommendation E.212.
       *
       * @return The country code of the SIM card's home network encoded as a string or an empty
       * string if the caller does not have sufficient permission or the SIM card's state is not
       * @c SimCardState::Ready.
       *
       * @permissions The application must have the @c read_cellular_data permission to access this method.
       *
       */
      QString mobileCountryCode() const;
  

  The application asks permission when opened, and without her, I can't read the SIM card, if the authorization is functional.

  Told me by e-mail from a developer evangelist at the moment, there is no way to check/change the permissions.

  My problem was that the application tried to read data from the SIM card what it opened, while approval has been invited only to the first opening of the app, and once you have accepted/refused, the app would remain on the start screen.

  My solution was to present a welcome screen only the first time that the application is open, so no SIM data would be read while the authorization is requested.

  See you soon!

  Pepe

• Why that I get an error called "check the operation failed" or "verify operations failed"?

  Why that I get an error called "check the operation failed" or "verify operations failed"?

  I have Adobe Acrobat X Pro

  I even uninstalled and reinstalled my Adobe Suite full - still the same problem

  Help!

  Acrobat Reader XI does not have this problem, but Acrobat Reader XI can not do all the functions acrobat X Pro can do

  I even tried to create a new user - not good - still the same error keeps popping up

  Help!

  Hi all

  There is a temporary problem with our servers which has now been resolved. If please re-launch Acrobat and let us know if still face you this problem.

  Thanks for your patience,

  -Ashu

• Check if validation failed on a page

  Is APEX 3.2, possible within the conditional display of a report to check if validation failed on the last presentation of the page?
  We have a report with a custom in the top search box. When you press search some validations of fire to ensure that the data entered in the search box is valid (invalid part number etc) which works very well. There are however some areas we need to be digital - the alert postings this correctly however, the region still displays and therefore has an error ORA-01722 invalid number. I want to make is that the region appears under condition so that it shows that if no validation has failed.
  
  Thank you
  John

  Try the built-in * [No.] types of condition appears Validation errors online *.

• Install Snow Leopard Retail: Checking the Installation failed

  Hi all!

  I currently own a MacBook (mid-to-late 2010) with the identifier MacBook7, 1 and I want to reinstall 10.6 after a few questions. I got my retail disk, and it says that it cannot be installed on my computer. I check the logs and it says the following (not all that, only the errors, sorry)

  21-24 June at 20:18:03 localhost OSInstaller [140]: controls Installation failed.

  22-24 June at 20:18:03 localhost OSInstaller [140]: verification of the Installation failure:

  What puzzles me is that the reason is empty! Any help would be appreciated!

  (BTW, I tried to do a format, disc check and repair and all the "solutions" and none of them worked.)

  Sometimes the retail drives do not work if they are the same major version than the original installation disc provided with a computer. I just checked, but as the best I could with the information that you provide and it seems that your computer was shipped with 10.6.3 and this is the same version as the retail drives.  Yet, I wonder if there is a specific build characteristic which is absent in the commercial version.  Contact Apple support to get a replacement original disk.

• Pavilion 400-034: short DST check hard disk failed

  I woke up to a computer with a diagnostic system with a hanging rotating circle. I turn it off; It restarted in the same diagnostic system that hung for hours. Fast test system then showed that check Hard Drive DST short: failed. Failure ID: 60D5U2 - 0007 MN-PXPAWJ-60XT03. Does this mean I need a new hard drive? How do you know that one to get and how to replace it? Finally, how can I get a copy of the operating system to load in the new HARD drive? Thank you.

  Hello
  
  Unfortunately to say: most of the time the 24 tank failure id indicates the drive is defective and must be replaced. It is still under warranry? In the affirmative, please call HP for a replacement.
  
  In the United States:
  
  http://WWW8.HP.com/us/en/contact-HP/phone-assist.html#section1
  
  or the HP technical support: 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.
  
  http://welcome.HP.com/country/W1/en/contact_us.html

  You have a set of recovery media? If this isn't the case, you will need to contact HP in your country (above links) to order one.
  
  Kind regards.

• Pavilion 15 n050sq: check Hdd DST failed

  I have a problem with my laptop, runs very slowly and after performing several tests that optimized hard drive check dst failed. Is the id of the fault: RUX49G-71Q85G-MFPWWK-61SM03 and the product id is F1Y68EA #AKE. I want to know what this test means, which is the id of the failure and what should I do to solve the problem.

  Hello

  The ID of the failure will be either a Smart failure or disk Self Test - the two would indicate that your hard drive is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• PC all-in-one HP 21z: short DST check hard disk failed

  A test of the system resulted in a failure in the Hard Drive DST short check, with the ID of the fault: U4JEW1-7B780A-QFFV6K - Q 60, 103.

  The trouble began 10 days after the expiration of the warranty. * sigh *.

  I need to replace the hard drive?

  Badrescher, welcome to the forum.

  Yes, the error message said you that your hard drive has failed and needs to be replaced.  You should buy a hard drive of the same size or larger than that to be replaced.  Otherwise, the system recovery media will not work.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Smart start checking hard drive fail

  Laptop start-up started showing check smart fail, and I need a new hard drive, where I can buy it.

  I checked the HP store, but found nothing.

  model G56-100SA

  Product LD701EA #ABU

  Series CNF0512STD

  Is it possible to buy a different drive for this laptop if HP daesn can't have a?

  You can buy an external hard drive SATA or SSD to an online retailer or a store that sells them.

  Source reference: maintenance & service guide

  

  I highly recommend an SSD upgrade for a performance upgrade.

• Why my dynamic permit application failed the test release appworld

  I received an email on my private release request, because it is not passed the test.

  my application uses dynamic license, I tested my URL of the server that issues the license within the portal provider key and it works fine.

  And I checked my server log, there is no request for application for licence during their trial period.

  I wonder how they did test for the dynamic permit application.

  Please contact support for BlackBerry App World from the seller for help with this.  You can contact them via this form: https://www.blackberry.com/profile/?eventId=8109

• Checking the connection failed for the source of data on port 1433

  Try to set up a DSN for a database of SQL Server on a new computer and it fails every time.

  Connection verification failed for data source: csf

  java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  The root cause was that: java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  Now, when I installed the CF 11, it is installed on port 8500.  However, when I try to change the port in the configuration to 8500, I get this error:

  • Connection verification failed for data source: csf
    java.sql.SQLException: timed out trying to establish connection
    The root cause was that: java.sql.SQLException: timed out trying to establish connection

  I can't find anything online about how to solve this problem!  Help!

  Hello

  Is that SQL Express edition? If so maybe TCP protocol is not enabled. Windows Firewall is enabled? Check port 1433 is open.

  Normally you would not create a data source to the apache 8500 port, which is a web server not Database not the port of the server.

  HTH, Carl.

• the font files could not be copied into the directory of local site. Please check permissions

  Hello. I'm new here. Can someone answer me why dreamweaver cannot accept files of fonts when I try to change the style of police with the program? Im making any good by Lynda - Dreamweaver CS6 Essential Training instructions of lessons, but I have a problem when trying to add new files of fonts css rule - could not be copied into the directory of local site. Please check the permissions...   Thank you.

  Open the fonts using Windows Explorer file and try to copy from its current folder in the folder root of the site on your hard drive and see if you get a Windows error.

  Do not use DW to import the file to the site.

  I guess that the file you are trying to copy is protected.

• Pavilion g6: Hard Drive check: short DST failed

  Hi, my laptop doesn't start, I managed the hard drive quick test, with the following report:

  DST short failed

  Failure ID: PLNORG-66H7LD-MFPX1G-60QB03

  Product ID: B4Z95UA #ABL

  This means that my hard drive is over? What I have to change? If I could retrieve the data I have on my C: drive?

  Sébastien Debia

  DST = disk Fail hard drive has not failed and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

• PAVILION ULTRABOOK 14-B005sa: check DST short, Failed. Failure ID: 0G87HT-6MB7JR-MFPX0K-60UG03

  Hello morning

  I ran a dingostis of hardware on my laptop and the result is:

  Short-check DST = failure

  Failure ID: 0G87HT-6MB7JR-MFPX0K-60UG03

  Please advise what means failure ID means and need to be replaced?

  Thank you very much

  AT

  Hello

  Recovery disk consists of the operating system, pre loaded drivers and pre-loading of software.