Choose the right network card

Similar Questions

• 4540 proBook s: how to choose the right network driver

  Hello guys. I clean installed Windows 7 Professional. Now, I see that I can not connect my computer to the internet, so I need to install the network drivers. I wen to the HP website and saw that there are 19 different network for my laptop drivers.
  How to choose the right method?

  Hello:

  Below are the links to the ethernet and wireless drivers you need...

  Wireless:

  This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.

  File name: sp66089.exe

  This card also needs a bluetooth driver...

  This package contains the OS driver installation package for the Ralink Bluetooth in laptop computers running taken in charge.

  File name: sp59632.exe

  Ethernet:

  This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.

  File name: sp63213.exe

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

  This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

  I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

  I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

  Pics:

  PCMCIA slot

  The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

  Wireless network card

  Wireless network card; It is a little damaged but it still works.

  Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

  Hi Steve

  Well, I can give t well you not answer how you can just remove the PCMCIA slot.
  There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
  Please check this specific device. Perhaps you have overlooked a few screws.

  But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

  Good luck

  Good bye

• ProBook 4520 s - exchange of the wireless network card

  Hello everyone.

  I think the exchange of the wireless network card in my Probook 4520 s, due to the low flow.
  So I searched for a while a 5 Ghz supporting the card and found out that I am only able to get in the "white" cards list working. Then I looked at this page:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & objectid = c02487851 & jumpi...

  These cards can be any, that have been used in 4520 s. Mine (according to the Device Manager) is the Broadcom 4313 802.11b/g/n. This thing only supports 2.4 Ghz. Now, I looked at the list for a 5 Ghz supporting the card. I think that the 802.11A/B/G/N WLAN Intel HMC 572520-001 minicards can operate on 5 Ghz, because I read, that A appears only with maps of 2.4/5 Ghz. I read too, that maps of 2.4 / 5 GHz have 3 antennas, but on this card I only the slots for 2. Is this good? And this card would go into my 4520 s?

  Greetings,

  Colony

  Hi, colony:

  You are right about your statement about the cards being described as A/B/G/N dual-band.

  The best thing to do is look at Chapter 3 of your service manual.

  You can only order one of the cards listed as supported and it MUST have the HP reference on it or it won't work.

  I see only two possibilities for you...

  The 6200 Intel and Broadcom 4322.  Make sure you also get the part # that corresponds to what country you live.

  If your current Broadcom card has integrated Bluetooth, you will lose your Bluetooth capability if you order an integrated HP bluetooth module and probably the cable too.

  None of the dual-band cards have embedded bluetooth.

  Link to the service manual.

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02439213/c02439213.PDF

  Then, you can order a card on the link below.

  If you do not live in the United States, you can change your country at the top of the page to yours.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6857BCBBC4CD4470B9282F130A563697

  Paul

• Choose the right PC for PCIe-1430

  It's the difference between PCIe-1430 and the PCIe-1429?

  I already see this article:

  Choose the right PC for the NI PCIe-1429

  http://digital.NI.com/public.nsf/allkb/1FD6E5B5A08C1E0786256F9B0079D449

  specifically, I want to know if anyone can share here the model of PC or configuration it uses with the PCIe-1430 framegrabber.

  I want to know what pc should I have to connect 2 camera link card PCIe-1430.

  Your help is appreciated.

  Dear Moti,

  I used the Dell Dimension 9100 and work Dell Precision 470 with the NI PCIe-1429 and PCIe1430, all two has worked well.

  -Robert Eastlund

• How to upgrade the wireless network card in Windows Vista

  Hello

  Please how can I update the wireless network card?

  Thanks for the help

  Hello

  I suggest you try the steps from the following link to update the wireless network card drivers.

  a. right click on the Start button and click on Device Manager.
  b. display all devices on one.
  c. right-click on the WLAN driver and click on Update.

  Display us the results, once you try the steps above.

• Configure the 2 network cards in a VM for MPLS LAN and the other for internet

  Dear all,

  I have a HP Server with 2 NIC cards. ESXI 4.0 is installed and 3 VM was created in it. Initially that a NIC card was connected to the path of the LAN MPLS switch and another card NETWORK was not connected to the internet switch port.

  Each VM only had a single NIC in it. So I assigned MPLS IP LAN to ESXI host and VM 3 and everything worked perfectly.

  Now, I wanted to have the internet connection for my 3 VM. So I plugged the 2nd NETWORK card with internet port and added the second NETWORK card to the ESXi using the Vsphere client - & gt; configuration - & gt; Networking option. Now the two nic cards are ponting to the network of the virtual computer.

  I've added 2 network card to all 3 VM and assigned to the internet IP addresses to all of these NICs. order of MPLS and internet work at the same time, I removed the card NIC MPLS entry door and manually routed through route add command. After this MPLS and internet worked well in 1 VM.

  I tried the same thing in 2nd and 3rd VM but it failed. whenever I have add 2nd network card in the virtual machine, the first of this virtual machine network adapter does not work.

  I'm after the right approach? Help, please...

  Kind regards

  Ashok doriane

  If I understand correctly your installation, you connected the physical NIC to two different IP networks.  Then you connected these cards in the same switch-v on the server.

  This essentially fills two different networks at the layer level 2 layer 3.

  You want rather than the two networks remain separated inside the host.

  • create a new v-switch on the host

  • move the internet NIC v-switch

  • Move the second NIC on each virtual machine to this switch

  • Make sure that access to internet VM NIC is one with a default gateway on a virtual machine OS

  • remove the default gateway of the NIC MPLS

  • creating persistent static routes to the NIC MPLS for any affected networks it beyond the same subnet as the NIC itself.  Addresses on the same subnet will be automatically accessible. Just roads for those outside this range.

  Steve Puluka

  JNCIA-ER enterprise routing

  Enterprise JNCIA-EX switching

  Senior network administrator

  Liberty Dialysis

  http://puluka.com/home

• Need help finding the right wireless card

  Hello

  I'm trying to find out what wireless network card should I buy for my laptop computer backup HP Pavilion dv4000 (dv4253EA) can someone help with this?

  Hello:

  Your model came with the wireless network card.

  Is there a place to install a wireless card?

  Are there already the antennas in the compartment?

  If this isn't the case, you will need to purchase an external wireless adapter.

  Please see the service manual in Chapter 5 for the location where the wireless card is going.

  http://h10032.www1.HP.com/CTG/manual/c00553278.PDF

  There is also a list of the supported WLAN cards with HP numbers.

  None of them are available for sale to HP, then your best bet is to buy used on eBay.

  Questioned by the HP part only number.

  Only one of the listed cards will work and they also have the HP piece on them or they will not work.

• Can satellite M65-S9092 - I put the wireless network card?

  Hello

  Can I put my card Intel pro 2200BG on Satellite M65-S9092 wireless network so that it is no longer compatible with Windows 7? The Intel Pro 2200BG is no longer supported by Intel as it was abandoned and so they have not issued a new driver so that IPv6 works.

  So I would update my card if possible.

  Thanks in adavnce

  Concerning
  Paul

  Hello

  I think that it shouldn't be a problem to upgrade the WLan card.
  As far as I know its a card wireless network of miiPCI and you would need to also use a WLan card which would support the miniPCI interface.

  The wireless network card supports two pins for the WLan antenna cable.
  Usually, you must connect a white cable to the HAND and a black to the auxiliary voltage

  All that s

• HP pavilion 15-e034tx: how to choose the right RAM for laptop

  How to choose the right RAM for my laptop (Pavilion 15-e034tx). I know I should buy DDR3 ram.

  Are there other factors should I consider when buying one? I got 2 slots for ram, which od these combos are possible?

  1-4 + 4 GB
  2-4 GB + 8 GB
  3-8 GB + 8 GB

  Thank you

  From the Manual:

  Two customer accessible/upgradable memory module slots

  Support for dual channel DDR3L (1600 MHz)

  Support 8192 MB RAM system in the following configurations:

  8192 MB (8192 MB × 1, × 4096 MB 2)

  Manual download link

  See page 53 for instructions. Memory access is easy via the service Panel. This is the part number for the approved 4 HP concert module:

  4 GB (PC3L, 12800, 1600 MHz) 691740-001

  http://www.Amazon.com/HP-691740-001-4GB-1600MHz-PC3L-12800/DP/B00CI08FX4/ref=sr_1_2?ie=UTF8 & qid = 1451655870 & SR = 8-2 & Keywords = 691740-001

  A 8 GB module is listed in the manual, and it's a 3rd generation of processor i5 I suspect 2 x 8 = 16 concerts would work, but strictly following the manual your only option is to add a 4 GB for a total of 8. Most users really not more 8 GB and adding a second identical module will allow two-channel operation, so you should see a noticeable jump in the overall performance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• CMS OVA, adding the second NETWORK card breaks the first NETWORK card

  I'm testing CMS 2.0 and when I try to add a second NETWORK card in VMware, he immediately interrupts the first network card.  As soon as the loading of the image, the first NIC fails.  Even if I disable iface b, it will allow all traffic where iface one.  If I stop the application, remove the NETWORK adapter and run it back again, it works very well to the iface one.

  I want to test the public face with box feature, but I can't if I can't add a second network card.

  How do you add the second network interface and interface you add?

  You should add 'VMXNET3' type if you use VMWare, if you chose something else, you invalidate your license, see section 3.3 of the virtualized CMS 2.0 Setup Guide for deployments.

  If you need assistance, you must move this thread to the section of telepresence of forums, where this device is actively discussed.  You can change your question and change the categories at the bottom of the page.

• can I configure an IPv4 address and IPV6 on the same NETWORK card

  I test double stack IPv4 and IPv6 on a firewall.  Can I configure IPv4 and IPv6 addresses on the same NETWORK card using a laptop installed with Windows 7, in order to test the firewall for both IPv4 and IPv6 protocols access? And if so, how to configure the NETWORK card?

  Thank you

  Jack P.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

• Please help me choose the right format mask

  Hello everyone.

  We use Oracle 11.1.0.7 RAC.

  Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

  NUMBER VARCHAR2

  0,123 0.123

  12345678-12345678

  12345678.1234 12345678.1234

  12345678.123 12345678.123

  12.00000008 12.00000008

  WITH data AS
          (SELECT 0.123 n FROM DUAL
           UNION ALL
           SELECT 12345678 FROM DUAL
           UNION ALL
           SELECT 12345678.1234 FROM DUAL
           UNION ALL
           SELECT 12345678.123 FROM DUAL
           UNION ALL
           SELECT 12.00000008 FROM DUAL)
  SELECT
       TO_CHAR (n)
  FROM
       data;
  

  Thank you, Dmitry.

  Hi, Dmitri,

  Dmitry Dunaev wrote:

  Hello everyone.

  We use Oracle 11.1.0.7 RAC.

  Please help me choose the right format for function to_char mask. On the left is a digital input, on the right is output desired:

  NUMBER VARCHAR2

  0,123 0.123

  12345678-12345678

  12345678.1234 12345678.1234

  12345678.123 12345678.123

  12.00000008 12.00000008

  1. WITH the data AS
  2. (SELECT 0,123 n FROM DUAL)
  3. UNION ALL
  4. 12345678 SELECT FROM DUAL
  5. UNION ALL
  6. SELECT 12345678.1234 FROM DUAL
  7. UNION ALL
  8. SELECT 12345678.123 FROM DUAL
  9. UNION ALL
  10. SELECT THE DOUBLE 12.00000008)
  11. SELECT
  12. To_char (n)
  13. Of
  14. data;

  Thank you, Dmitry.

  I don't think that TO_CHAR can do by itself.  You should maybe call TO_CHAR and then manipulate the output a bit.

  Looks like TO_CHAR with 1 single argument does exactly what you want except when it returns a string starting with a decimal point, in which case you want to concatenate a '0'.  So call TO_CHAR with 1 argument, see if returns the string begins with a decimal point and, if so, put a '0' on it, like this:

  WITH got_str AS

  (

  SELECT n

  TO_CHAR (n) AS str

  FROM the data

  )

  SELECT n

  CASE

  WHAT LIKES str '. %'

  THEN "0". Str

  Of ANOTHER str

  END AS str0

  OF got_str

  ;

  Output:

  STR0 N

  ---------- -----------------------------------------

  0,123.123

  12345678-12345678

  12345678.1 12345678.1234

  12345678.1 12345678.123

  12.0000001 12.00000008

  What do you want for greater than-1 negative numbers?  You may need to make the CASE a little more complicated expression, like this:

  WITH got_str AS

  (

  SELECT n

  TO_CHAR (n) AS str

  FROM the data

  )

  SELECT n

  CASE

  WHAT LIKES str '. %'

  THEN "0". Str

  WHEN the str LIKE '. %'

  THEN '-0 "|" SUBSTR (str, 2)

  Of ANOTHER str

  END AS str0

  OF got_str

  ;

• How to get the driver network card and on the use of the PowerCLI firmware version?

  Hi all

  I would like to know if anyone can help me in sharing the PowerCLI script to list the server NETWORK card driver and the firmware version?

  Note: I use the HP Blade Server and it's manual ESX - CLI command output:

  	HP BL 465c G8
  	~ # ethtool-i vmnic0
  	pilot: be2net
  	version: 10.5.65.4
  	firmware version: 10.2.340.19
  	bus-info: 0000:04:00.0

  	HP BL 465c G7
  	~ # ethtool-i vmnic0
  	pilot: be2net
  	version: 10.2.293.0
  	firmware version: 4.9.416.7
  	bus-info: 0000:04:00.0

  Any kind of help would be greatly appreciated.

  Thank you.

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 6.0 Release 2 build 3056836

  ---------------

  Component versions

  ---------------

  VMWare AutoDeploy PowerCLI component 6.0 build 2358282

  VMWare ImageBuilder PowerCLI component 6.0 build 2358282

  VMware vSphere PowerCLI component 6.0 build 3052101

  It works for you?

  $esxName = "MyEsx".

  $esxcli = get-EsxCli - VMHost $esxName

  $esxcli.network.nic.list () | %{

  $esxcli.network.nic.get ($_.) Name) |

  Select Name,

  @{N = "Driver"; E={$_. DriverInfo.Driver}},

  @{N = 'Version'; E={$_. DriverInfo.Version}},

  @{N = 'Firmware Version'; E={$_. DriverInfo.FirmwareVersion}}

  }