Chromebook 14: Chromebook 14 power connection

Similar Questions

• Chromebook and Adobe Connect

  Hello.

  I'm studying Chromebook and I wonder if anyone has comments on the use of Acrobat Connect Pro on Chromebooks?

  I can make a few assumptions about how they perform:

  1. no additional connect, so accordingly;
  2. No screenshare

  Otherwise, I would Connect to run as it would in Chrome on a PC or Mac for accommodation and participation. Can anyone confirm this?

  With Chromebook use is so low that I don't know anyone who has one I can test properly.

  Some key questions I want to answer:

  1. has anyone experienced problems connecting headset or external webcams in Connect via Chromebook?
  2. Connect still suffers from the occasional Flash accident that kicks you in the meeting?
  3. do file uploads to central Connect to a book of Chromebook as expected?
  4. customized pods work as expected?

  Thank you a lot before all the advice that can be given =)

  OK, I've just sat down with a Chromebook and was able to download files and make all the plug-in software non-composant normal functions in connect.

  I think that you should be good to go.

• Satellite A205 freeze after the power connection

  My computer has this strange problem. It stops completely after that I have plug in the power supply.
  What I do now, it is let it recharge when it is off and use it without food.

  There is a chance that it works with the power connected, but generally, it stops again in the trunk.
  If the battery is low and I connect the power usually, it stops right after that I do, sometimes not.

  I also tried to install Linux. But the same thing happens (except by the fact Linux only stops in the trunk)
  I'm now using Windows Vista.

  Thanks for the time and sorry for the English.

  > any suspicion?
  As suggested above; It looks like an electrical problem on the motherboard power supply. Maybe the motherboard must be changed.

• Dell 11 7140 place - do not start after reboot and shutdown without power connected

  Hi all

  I had problems with my new Dell 11 7140 place since I bought it. If I reboot or shutdown the Tablet without the power cable plugged in, it crashes on start/stop to a black looking screen as he stopped (but it isn't). He will sit on this State forever or until the battery is completely discharged. If I press and hold the power button for 5-10 seconds I can force a shutdown and turn off the tablet.

  It's even worse if; After that I have to reboot the machine, it just sits there on the circle of rotation points and never goes anywhere. After a few tries, it will eventually in windows recovery, but he never manages to recover anything. The only way to get the Tablet working again is to reimage the dos operating system.

  I tried the following:

  1. Most recent of the installed BIOS A07
  2. All the latest pages Dell device drivers
  3. The latest version of Windows Update
  4. I tried to start in safe mode, but get points again spinning
  5. Tried to restore points that had once or twice the PC to start again, but the system is messed up. Built in Windows apps like photo viewer don't work anymore and I just to reimage.
  6. Tried running the Dell diagnostics, but which did not find anything wrong

  The funny thing is that if I reboot or shutdown with the power connected, then everything is OK. I can do this all day with no problems. Standby and hibernation work OK with no power attached.

  I have tried everything I can, but I'm at a stage where he's going to have to go back to Dell. Please can anyone give me any suggestions of what I can try, thank you.

  To follow up on this post, the final solution to this issue was to return to the Dell Tablet. The motherboard has been replaced under warranty and since it was returned to me I have had no more problems.

• Lenovo N20 chromebook - option 3G connectivity?

  on the N20 Chromebook lenovo: is, in this model, a device of SIM card in place? If so, how do I install it? Otherwise, what is ment by the mention of Lenovo: 3G connectivity in option?

  means that the antenna is installed in the area of the screen, so if you were to add the option for the card 3g there is a sock for installing the card and an antenna instead of accepting this option

• Computer laptop Chromebook does not connect to the printer HP Officejet Pro 8610 range

  Hello! I have a few problems with the connection from my laptop to my printer to print documents!

  I have connected my printer to my wireless network, but do not understand how to connect my laptop to the printer!

  I don't have a disk drive with which use the installation disc in and the site that gave me to visit "hp.com/eprint/OJPro8610" shows me a 403 forbidden error message to ask. Can someone help me please? It is worth mentioning that I am not too good with computers, you may need to treat me like a little baby to make sure I know what you're talking about.

  My laptop is an Acer C720 Chromebook

  My printer is a HP Officejet Pro 8610

  Please hep me. Please, I beg you.

  Hello

  You need the following application:

  https://support.Google.com/chrome/answer/1069693?hl=en

  Please select the option #1

  Kind regards.

• Satellite Pro M70: Noise with laptop OFF If power connected

  Hello

  I have the following problem with my new Satellite Pro M70.
  A strange volume low hissing sound that happens when the power is connected to the laptop.
  This noise occurs even with the laptop TURNED off when the power is connected.

  This sound can be heard in a noisy room, but is quite annoying when you work in a completely quiet room.

  Anyone else have the same problem?

  Hi Geo

  I presume that this adapter produce this noise. Am I wrong? Can you please locate the source of noise just?

• 860 - 160se CTO: install a SSD and SATA power connections

  I try to add an SSD for my computer.  Does anyone know the correct references to allow the DSS must be installed in drive caddies in the chassis?

  Also, I will need another cable to SATA power by the look of it.  I need an explanation of the various SATA ports on the motherboard to know that one to connect the new drive in.

  Thank you

  Hi @Roughneck42,
  
  Please become a member of the HP's Support Forums. I understand that you are have question for upgrade of your computer. I'll be happy to help you.

  By HP part Surfer screw is

  482291 - 001Screw - M3 x 5mmL, TT, second lieutenant, HI / TP

  The cable is

  809377 001

  Cable - SATA3.0, 185mm, ST - ST, RF

  The SSD are

  696356 033

  Disk hard - SSD, the GNRC, 512 GB 2.5 "SATA 6GBs 3

  6GBS Drive - SSD, GNRC, TLC 256 GB 2.5 "SATA3, 696356-035Hard

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• NB 300 power connection

  Recently noted that the connection of the power cable to the NB300 begins to waver a bit. Not sure if this happened at a time or a design flaw. Battery still fresh on the connection but I'm not sure that this could be a problem of warranty or something that happens and it deteriorates to the point that something falls or is pushed inside the computer. Old computer for a few months only and infrequent wiring.

  Your experiences would be received with gratitude thank you

  Iain

  If his only wobble a bit and the DC shuts, then it should be fine.

  If his jittering excessively or DC cuts off when falter you, it will be repaired in a Toshiba repair center.

• SatelliteU300 will not start with power connected and fully charged battery

  I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

  Any help appreciated.

  Hello Andy

  Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

  Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

  Bye and good luck!

• Satellite L40 don't stop with power connected and is not in sleep mode

  Hello world. I hope someone can help me. Basically, there are two problems: one with judgment of the laptop (Satellite L40 - 17U (Vista 32 bit Home Premium SP1)) down when power is connected and the other with closing the lid and put it to sleep.

  1. in recent weeks, it all of a sudden won't stop, whenever power is connected. When it's on battery, it will stop. When the power is connected, and I try to stop, it seems that it closed down (all activity stops and the led goes off) for about 1 or 2 seconds, then it goes back.

  2. when I close the lid (all settings in Vista are set to put the laptop in a State of 'sleep' when the lid is closed), the laptop enters a State where it cannot be recovered by stopping by pressing the power button for 10 seconds to close completely. When closing the cover, only the battery LED continues to Flash orange (the way it should be), but apparently the laptop keeps consuming power, because when I restart later (first having to close as described above) tends to be quite an empty battery as it was before the next redΘmarrage it (like go from 100% to 65% in 30 minutes as "standby mode"). Also, when I open the cover, the other LEDS will on new (green), but nothing happens.
  After the restart first by pressing the power button for 10 seconds to close, I often get the message that Windows cannot be started and run the system repair.

  I just do a completely clean install with the product recovery CD (has not installed SP1 yet), updated to v1.90 BIOS, but the problem remains.

  I'm afraid that my only option will be to bring him away for a warranty repair, but knowing that these repairs can take weeks, I'd rather try a solution here could someone recommend me first. If you have any ideas, please let me know.

  Thank you
  Daniel Breslauer

  Hi guys

  Never had this problem on my laptop, but with regard to an other users here in the forum the BIOS might help solve such strange behavior for laptop
  To be honest the closed question is unclear for me I noticed a problem before on my laptop but the update of the BIOS helped.

  This is why I recommend update BIOS first.
  If the problem still appears, the ASP should take a look in the notebook.

  Good luck

• X 1 carbon 2014 windows 7 hangs after the main power connection

  Nice day

  After the Polish Lenovo call center refuses to help me ask you to help. For about a week now, my X 1 carbon 2014 hangs after connection to the power supply. It's so irritating. I think, I only installed the updates regular windows 7 and the update of the BIOS via the lenovo update tool.

  The Polish Lenovo Support Center came with the excellent range of system solution. I really hope that you would be able to help more effectively at the same time.

  Thank you!

  Pawel

  
  

• under xp. try to download service pak 3 and get 0x8007F0F4 need ac power connection error message and it's hanging?

  I tried to download service pak 3 for xp.  I get messege error 0x8007F0F4 which the computer must be connected to the power supply and it is hung.

  Install the latest drivers for power management.

  If Toshiba, install the last value added package too.

• My acer aspire 5050, pin power connection is broken, what is my options?

  The power cable to operate or recharge this phone cannot be used as the PIN inside the connector that connects the cable is broken. What are my options? This device is an Acer Aspire 5050 series, type of laptop. Thank you

  send it back to acer for the service

  but they will charge out-of-warranty fees

• sudden loss of battery power, connection lost, lose all power from power supply disconnected, does not recognize battery

  I have a Sony VAIO & use the largest of the battery (extended life) since I bought it 3 years ago fighting.  I was always able to automatically switch the power supply of the battery by simply unplugging, or computer plugging in AC on leash.  And, I was always able to see the battery down icon to the left of the screen (taskbar) & it would show % battery remaining.  Now, all at once, as soon as the power supply cord is UN-plugged the laptop turns off completely, no reserve power at all & I can't find the info of the battery. anywhere on the computer.  Icon no longer appears in the lower left corner & when I go into the power settings, the "Battery 1" icon is grayed out, so it seems that the computer is not finding all the batteries.  It happened so suddenly.  Could battery comes essentially lost all its power & become non-existent to the computer, or is this a computer problem, battery not recognize.  Not sure if this puts some I can fix somewhere, or if I need to have a computer repair man to fix the real computer.  Please HELP, I am desperate to solve this problem, as a laptop does not really serve its purpose if it must be connected to the hard power all the time!  TX in advance for a help, suggestions.

  Yes, most things are cheaper to replace than to trouble.

  But if the laptop seems to work ok otherwise, he might just be easier to see if there is a recall on the faulty battery or if it is still under warranty.  In addition, sometimes you can add a little more memory to the old system and see some performance improvements

  on the other hand, replacement of the laptop can be problematic because the old machine has all the programs installed on it, registered product keys and has accumulated years of personal files.  and sometimes old expensive programs won't work on newer versions of windows.

  the argument would be to close the new machine on the standards you eventually accept.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann