History of calls Cisco VCS 7.0.2

Similar Questions

• Restricting calls between a subarea and specific extensions on Cisco VCS

  Hello, I use Cisco VCS 8.5.3, my goal is to restrict calls between a subarea and specific extensions.
  I tried following solutions:

  1. Download of XML strategy
  2. Use of political appeal web interface in order to limit calls

  XML file:

  
   
   

  
   
     
     

  
     
     

  
     
     

  
       
     

  
     
   

  
  
  

  But when I apply the XML file, or try using the web simple rule (for example: 11111 12222 destination source, dismiss the action) I'm still able to place the call to 11111 to 12222.

  What can be the cause of the problem and what else can I try to be able to prohibit calls between a particular Subzone and exentions?

  Attached, is an example of CPL script that should work.  Using this script, CPL, I was able to block calls to a subarea set to a destination alias located in the subzone of default and was always able to call any other end point in the default subfield without problem.  Note that you must enter the name of the subarea, as you have configured on the VCS, including spaces if they exist.

  The scenario is based on the example of CPL "limiting access to a local gateway" X8.5 VCS Administrator's Guide on pg 413, other documents of CPL reference and examples can be seen starting on pg 410.

• Cisco VCS and MCU - Conference does not

  Dear community members

  I have problems in the VCS configuration to work with the MCU to join to several endpoints in a conference. The components that I use:

  -Cisco VCS control v8.7.

  -Cisco 5300 MCU 5310 v 4.5 (1.72)

  -3 x SX20 end points

  I recorded every endpoint and MCU on VCS, but I'm not able to do a conference call 3-way, the only option is 1 video and 1 audio (I disabled the Multisite option). It seems that VCS does not yet call the MCU in the game.

  Kindly help us with it.

  Can you tell us how you set up the Conference and how you have configured MCU and endpoints?

  From the sounds of it, you call each end point of one of the SX20s, but you must call simply directly in the Conference on the MCU.  If you want to have a conference point to point between two end points and then degenerate into a multipoint conference on the MCU, you must configure Multiway.

  With the help of Multiway with Cisco TelePresence systems

• Maximum non-traversal calls from VCS Cluster

  Hi all

  As mentioned in the CV data sheet, I know that a VCS can accommodate up to 500 calls from nontraversal.

  But VCS cluster which consists of 6 VCS can treat 2,000, steps 3 000 (6 x 500).

  I wonder how many calls each VCS cluster can handle.

  Is this correct?

  2 VCS cluster

  => Registratrions up to 5,000?

  Up to 1,000 calls in nontraversal?

  Up to 200 calls course?

  VCS cluster 3

  => Registratrions to 7 500?

  Up to 1,500 calls to nontraversal?

  Up to 200 calls course?

  4 VCS cluster

  => Registratrions up to 10,000?

  Up to 2,000 calls in nontraversal?

  Up to 300 calls course?

  5 VCS cluster

  => Registratrions up to 10,000?

  Up to 2,000 calls in nontraversal?

  Up to 400 calls course?

  6 VCS cluster

  => Up to 10 000 registratrions

  Up to 2,000 calls from nontraversal

  Up to 400 calls course

  Best regards

  Kotaro Hashimoto

  Hi Kotaro,

  even if the 6 servers are taken in charge by vcs cluster however only 4 will be active. So 4 * 500 is 2000 license.

  https://supportforums.Cisco.com/docs/doc-19215

  check the above document.

  Rgds

  Alok

• Cisco VCS X6.1 and MS Lync 2010 over TLS

  Hi all!

  I have a problem of integration CiscoVCS (X6.1) and Lync 2010.

  I couldn't configure control VCS to Lync connection over TLS, but I've done with TCP.

  If I try to TLS, there is detail = "bad packet length", event = 'Outbound TLS negotiation Error' records in the control of VCS event log.

  The VCS and Lync certificates are of the same CA approved with their FQDNs as object names and the VCS and complete Lync with EDCS are in the DNS system. Of course, VCS and complete Lync, what subjects of certificates, used in VCS approved area and host of destination trust app Lync.

  Calls for VCS is the intellectual property of the EFF Lync. We use no HLB and administration. Also, VCS is autonomous, without any load balancers or clustering.

  Lync signaling is done, but as I see it, VCS cannot send the data back.

  Lync is on Server 2008 R2 x 64

  Thanks for your suggestions!

  In reflection of the c20 position, what image software do you run on the VCS?

  with:

  s42700x6_1_0.tar.gz     21-Apr-2011 12:39  266M
  
  or without:
  
  s42701x6_1_0.tar.gz     21-Apr-2011 12:43  266M
  

  encryption?
  
  

• Vcs Tandberg and Cisco VCS control

  Hello

  I have a client with an old would invest video and new servers.

  Old video servers

  Control system Tandberg video Communication Server - part number = 117500

  Application of Tandberg video Communication Server Expressway - part number = 1163402

  New video servers:

  VCS License Control - Part Number - R-VMVCS-CTRL-K9

  VCS Expressway License - Part Number - R-VMVCS-EXPWY-K9

  According to Cisco x8.2 Clustering:

  -Each peer runs on a hardware platform with equivalent functionality; for example, you cannot cluster one
  peer running on one core 2 average VM with peers running on base 8 large virtual machines

  Means that the physical old VCS cannot be grouped with new virtual VCS.

  Thank you.

  Hi zizou.

  You can include a device VCS with a VCS VM as long as their matches of software and their hardware platforms have equivalent capabilities.

  Device VCS clustered with VCS VM running on core 2 MediumVM = YES

  VCS machine clustered with VCS VM running on 8 cores LargeVM = No.

  "you can even cluster that are running on the standard devices with peers running on core 2 Medium VMs, but you can not group a peer running on a standard unit with peers running on base 8 large virtual machines.

  (p.4)

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/VCs/config_guide/x8-7/Cisco-VCs-cluster-creation-and-maintenance-deployment-guide-x8-7.PDF

• Cisco VCS VCSE H323 Support LAN2 missing

  Hello community,

  After the upgrade VCS to 8.7.1 I see below the H323 config just LAN1 is activated it. I use LAN2 for external connections. So, for this interface, that there is no possible connection with calls H323 1720 from the outside. Have they changed it? There are always two interfaces active in SIP.

  Now they dial-in can´t us on H323 like @.

  Can we do a downgrade and restore the config? Is there a known change? Nothing in the Release Notes.

  Thanks for help.

  Have you tried to call your VCS-E from the outside and to see if it's actually not accessible, or by using SSH check the State of H323 with command: xStatus H323?

  I saw no bug on this topic.  I would downgrade to the previous version you are running, if the second address lan reappears, Sue to get it looked at TAC.  It could be a bug or just a cosmetic problem.

• Cisco VCS - C keeps filling in Purge on MSDS systems

  Hello

  I have a very weird question that is quite difficult to explain. We had a few failures of Fan on my Cisco VCS - C and we did a RMA number and received a new one. I installed this VCS in April this year. I start then notice every time we add a new system to their MSDS ID TMS is of the order of 2860. We have only 42 systems at this stage. Then I noticed when I'm in the systems tab Purge TMS keep my new Cisco VCS - C, populating the name of the system and the type of system, this product about 2800 times. Someone else experiencing something similar to this?

  I'll try to purge these systems, the only thing is that this happen, what can I do else do I completely purge my VCS of TMS and readd it?

  TMS system IDs are generated by TMS and increases when you add several systems.  You might be able to change the ID of the SQL database, systems are stored in the dbo.objSystem table, but I do not recommend because the ID of the system could be used elsewhere and you can potentially break TMS and make things worse.

• Make use of crossing call instead of Non-traversal on Cisco VCS - C

  Hello

  I have a test of Cisco's VCS running non-traversal 20 and 100 license course. I need once I have start a session of Cisco's Jabber client to one of the cameras (Studios). I want the VCS to consume a license of traversal appeal?

  Is - this possibe?

  Hello

  If you enable interoperability and call Jabber on sip to H323 endpoint. <->SIP h323 will consume a crossing

  Lisence.

  / Magnus

  Sent by Cisco Support technique iPhone App

• Cisco VCS and integration Lync2013

  Hello!

  Could you tell me please, when CISCO officially support Lync2013 - free new software for VCS - C and documentation on integration?

  The main interest is the possibility of transferring video between CISCO/MCU and Lync endpoints on the H.264 Protocol, who hails from Lync2013.

  Right now, I've got VCS - C and RTM Lync2013 X7.2. During the video call without AMGW appeal established as audio only.

  When using with Lync2010, it worked on Protocol H.263 and CIF resolution.

  Evgeniy salvation,

  We are currently investigating the possibilities to achieve interoperability between Lync 2013, VCS and video devices on the side of the VCS standards-based, it is a work in progress and at this stage, it is to early to provide any factual information on when interop will be available.

  In contrast to Lync 2010, Lync 2013 does not support H.263 for video and it so that will remove the OCS/Lync integration. I do however think that you should be able to make a two-way video between Lync 2013 and VCS-joined endpoints if you use an AMGW tried that yet?

  Thank you

  Andreas

• Change the Source URI for outbound calls using VCS Expressway X8.2

  Hi all

  I would like a little help on a CPL script, that I'm working on. I lived all the examples of community support and I am always sick.

  We run on VCS X8.2.  What I've read, VCS X8.1 has introduced a few new CPL capabilities, including the node location CPL supports rewriting the regex-based source alias.  I would like to take advantage of this new feature. I'm looking for a tutorial or a direction more advanced examples using this new capability.

  Here's my question:

  I have an internal domain "CompanyA.local" and I have a public domain "Entreprisea.com". «My Cisco video endpoints register control VCS with a SIP URI of "[email protected] / * / .local'.»

  Receive calls from outside help "[email protected] / * / com" and the rules of research, I route calls properly internally.

  When I dial an external company, my endpoint is showing a video SIP URI of "[email protected] / * / .local"

  Of course, this isn't a SIP URI dial-able and should be changed to "[email protected] / * / .com'." "

  I know that this can be achieved using CPL, but I have not used this feature before.
  Any help would be appreciated.

  Please suggest an example script CPL I can review.

  I would use a Regex to cover all of my similar to the following endpoints:

  source-url-to-message-regex = "(.*) ' @CompanyA.local '"
  source-url-to-message-replace = "------[email protected] / * /"

  Thanks in advance for any help.

  oooooo, that answer above gave me the answer I was looking for. It does not work! It seems that the syntax for the xml file has changed from pre x 8 and x 8. Looks like I've been using the incorrect syntax. I was missing the AVA: in the clause to the proxy, which is my version of rule switch not working. Still don't know why the address switch did not work, but I prefer the rule-switch anyway, so no big loss for me.

  I've tested, and it is fully functional on my vm VCS x8.2 running lab

  
  
  "xmlns:TAA ="http://www.tandberg.net/cpl-extensions"
  "" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance"
  xsi: schemaLocation = "urn: ietf:params:xml:ns:cpl cpl.xsd" >
         
           
             
               "[email protected] / * / ' >
                 
               
             
           
         
  

• Cisco VCS Expressway / Starter Pack = part number / Option key

  Hello

  I m a bit confused about ordering cisco information. My document: http://www.cisco.com/c/en/us/products/collateral/unified-communications/...

  First what we want to do. Quick and short: LAN-MCU -/- DMZ-VCSE VM -/-

  -set up a new environment VCSE only for remote workers.

  -ensure the video service just over the internet for Jabber and SIP/h.323 conference systems

  -only the MCU as a peripheral local registerd to provide several conferences

  That share and option key is therefore the best choice?

  Our plan:

  VCSE:

  R VMVCS-EXPWY-K9 (comes with the Cisco telepresence video Communication Server(OVA file) Network Interface feature, characteristic of the motorway, gateway functionality, 1800 TURN relay Option, VCS-Dual)

  1. what inscriptions? There are 2500 built-in?
  2 what of interoperability feature for h.323/SIP? CAN´t find in the list options.

  Options:

  LIC-VCSE-50, LIC-VCS-OCS

  Now the thing of Jabber:

  We want to connect on WAN Jabber clients. This is why the VCSE STRATER PACK has the nice feature of 50 video of Jabber Cisco TelePresence licenses with management in there. But if we get that the CTI-VCS-STPAK-K9 instead of the VCSEVM, we have a limitation of 50 records and 10 calls trasversal, right? Only then the VCSE is intresting (culture and systems to support), but we want the Jabber options on it without buying an MSD.

  1 can we install the CTI-VCS-STPAK-K9 key as an option on the VCSEVM and Jabber use 50 records without losing other features of Highway?
  2 or is it possible to install the CTI-VCSE-SPUPG-K9 key as an option to enable Cisco Jabber 100 user on this VCSEVM?

  Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25)

  Thanks a lot for answering

  One of the first things I would consider on VCS Starter Pack is that it is almost end of sale, first of September 2014, so think of this forward.

  / EOS-EOL-Notice-C51 - 731300.html

  • What these records? There are 2500 built-in?
    • A single VCS will support up to 2500 records out of the box with a valid key.
  • As for the functionality of H323/SIP Interworking?
    • Interoperability is supported out of the box as long as no separate option key not required.
  • Options: LIC-VCSE-50, LIC-VCS-OCS
    • LIC-VCS-OCS is necessary only if you plan to integrate with Microsoft OCS/Lync VCS, otherwise it is not necessary, especially for the video of Jabber.
  • Can we install the CTI-VCS-STPAK-K9 key as an option on the VCSEVM and Jabber use 50 records without losing other features of Highway?
    • The VCS Starter Pack is a separate server from the VCS control and highway.
  • Or is it possible to install the CTI-VCSE-SPUPG-K9 key as an option to enable Cisco Jabber 100 user on this VCSEVM?
    • It is possible to upgrade a VCS Starter Pack for VCS control or a highway, but you will lose the original pack starter call licenses and Jabber video optoins, like they are not transferable.  The licenses or options you have purchases on top of the basic starter pack will however is transferable.
  • Or do we buy the CTI-TMS-SW-K9 with LIC-MOVI-25 (the different today: LIC-JAB-MOB-25, LIC-TMS-EP-25)
    • If you buy the VCS Starter Pack, it will manage the delivery of Jabber video for you.  If you buy a highway of VCS, you can also buy MSD and install Extension of provisioning of TMS is free.  To use TMSPE, you will need provisioning option keys installed in TMS, the difference between the start-up option keys are simply the types of devices you can fund, all kind of do the same thing really, but for the video of Jabber, you want to ICA-MOVI-XX.

• Can WHRE I find the history of calls on the CV

  Hello

  The event log and cab ve read through the Web page call history. But how can I download the complete event log file and call history frim the VCS via SFTP (WinSCP)?

  Please specify the location.

  Kind regards

  Fird

  Hi Firdaush,

  I tried your method. It's work.

  I heard not this way.

  Thank you

  BR Oleksandr

• Problems after update of lollipop - history of calls

  Hello

  I've updated to Android 5.0.2 a week ago and my call history is a mess - see screenshot! I have a lot of 'private number' s but I rarely talk to someone who is not in my repertoire and even if I did, I should still be able to see the number instead of 'private number '. Before the update, I used 4.4.4 and had no such problem.

  P.S., Only outgoing calls are labeled as 'private number '.

  I've lost the ability to use an MP3 as ringtone - I used to have a ringtone custom before the update and now I can't use it even if I can see and choose it from the list of ringtones - no error appears when I choose what it but the ringtone does not change. I now use one of the preset ringtones.

  Very often, I get the exclamation point on the WiFi network on top of the screen icon - I use WiFi at home and office - network private with encryption and a password.

  
  

• integration of lync 2013 with cisco vcs - c

  Hello

  I found a lot of documentation on integrating to Lync 2010 with VCS - C, but can't find much on the integration of Lync 2013.  Could someone shine some light on this for me?
  Thank you!

  Hi, David,.

  It would be preferable that you contacted Cisco re: integration

  https://supportforums.Cisco.com/thread/2181356

  Cisco PDF

  Or try to repost your question to the TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsinterop/thread/319f9e94-f7ec-4c6e-994C-f5412e345e2e