Code 19 No. DVD Drive... what happened?

Similar Questions

• Code 19 CD/DVD drive problem.

  My CD/DVD drive is not recognized.  I go into the Device Manager and it says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall then restart and reinstall as troubleshooting says and I still have this problem.

  I tried "Mr. Fix it" and tells me that it cannot solve the problem.

  I tried to go through the steps of using regedit and there are no "less" filter to remove, only a "superior" filter  When I look for what to do if there is no lower filters to delete, there is no help in finding.

  I checked my driver, that is until this day of nto.

  I tried a system restore. Did not work.

  I am at my wits end and any advice would be very welcome.  It seems at this point, I need to reinstall windows xp, but I have no idea how to do it even without a working cd player.

  My OS is Windows XP pro with service pack 3, and is my reader of cd/dvd LITE-ON COMBO SOHC-5236V.

  Thanks for any help.

  Hello

  In this case, try to remove the filters in your registry of the computer from the CD/DVD drive to get rid of the error CODE. Please see the link below:

  http://support.Microsoft.com/kb/982116

  Thank you! :-)

• receiving error code 39 for dvd, driver will not load.

  replace corrupt cdrom.sys

  small management business of vista 32 bit.  receive error code 39 for dvd.  driver will not load.  I tried to uninstall.  same question on re - start.

  I tried regedit suggestions.  UpperFilter deleted, no lower filter exists.

  In addition to the above on the excellent advice, cdrom.sys is not corrupt.

• Code 39 CD/DVD drive not detected

  Hi, I had to reinstall Vista because my files were corrupted by using Microsoft e-mail support.  I tried to install Windows service pack 2, but it would not be installed. After repair corrupt Vista files and finally get service Pack2 installed, I have had to reinstall a software disc that came with my computer Dell. The cd/dvd drive makes noise but does not read the disc. I logged on the Dell support site and follow their recommendations without success. I have downloaded the recommended bios and firmware dvd, uninstalled Roxio Creator and dvd driver but the system goes on to say that the drive is not detected. Finally, I called Dell and, of course, only the equipment is under warranty and I can't afford to pay for the software support. My computer is 8 months old and I rarely use the dvd player. It worked fine before these repairs and upgrades. My system is Vista 64-bit with service pack 2. According to Device Manager, my dvd player is number model PLDS DVD +-RW DS - 8A3S. BTW, as part of my purchase last summer that I was sent disk to upgrade to Windows 7 for free. I didn't want to hassle with installation at the time, but after pass by all this... should I go ahead and upgrade to Windows 7 after I receive my dvd player work?

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or
  even if there is 'old', you can reinstall. However, many use the default Windows drivers
  Some will be more special. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• If I buy a new card motherboard but plan to keep the same HARD drive, what happens when I reinstall a new copy of Windows 7?

  I have an OEM of Windows 7 version, so when I buy a new motherboard I intend to buy another copy of Windows 7. What will happen if I use the same hard drive?

  Depending on the options you choose during installation. If you start from the installation DVD, you can only do an install custom, which means that your applications and hardware drivers will have to be resettled.

• Re: Satellite C660 - code 19 CD/DVD drive error

  My Satellite C660 CD/DVD ROM drive does not read the CD. When checking my device manager, there is an identified problem:
  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  How can I go about repairing this anomaly?

  Hey,.

  It is a known issue and there are already several discussions here in the forum about error code 19 Device Manager. Toshiba has published an FAQ about this article:
  http://APS2.toshiba-tro.de/KB0/FAQ82023A0000R01.htm

  To get rid of this, you must remove the server - and lowerfilters in the Windows registry:

  1.demarrez > run > Regedit
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  4.reboot.

• ESXi installed on a USB flash drive - what happens to the remaining space?

  ESXi requires only 1 GB of the flash player, so I wonder if the remaining space could be used for other purposes - for example, files storage logs or something? Or ESXi reserves the rest of the space?

  The remaining space remains unused. Volumes VMFS as well as scratch location requires storage 'rapid '.

  André

• I formatted a hard drive of 250 GB using ntfs and the data stored on it, my old hard drive died, so he was replaced now when I go into windows, it shows the drive as raw what happened?

  The old hd wd swarmed so it has been removed, a new one installed Windows xp now when I go into windows, it shows the active partition, but no system file and when you try to access it, says I need to format the hard drive, what happened to all the data that I had before?

  I found a program to retrieve all the data myself using easeus.com

• Trouble shooting Code 39 / none of my CD/DVD drive can be loaded or work because of this code. What should I do?

  I can't connect my external or internal CD/DVD-ROM due to Code 39 readers? What should I do about it?

  Hello

  Try to remove the filters in your registry of the computer from the CD/DVD drive to get rid of the error CODE 39. Please see the link below:

  http://support.Microsoft.com/kb/982116

  Thank you! :-)

• Equium A100: CD/DVD drive stopped working code 22

  Toshiba Satellite A100 on Vista operating.
  CD/DVD drive has stopped working and shows it as being disabled. Tried to re - activate but the error code 22. Can anyone help?

  Hello

  The Microsoft page provides information about error code 22

  * This device is disabled. (Code 22) *.
  _Recommended resolution_
  + Activate the device using Device Manager. +
  + In Device Manager, click Action, and then select device. Starts the Enable Device Wizard. Follow the instructions. +

  Looks like you have already tired it. Well, in your case I would recommend removal of the CD/DVD drive from the list of devices in Device Manager. Mark simply the unit a press to remove.

  Then, restart the computer and check what is happening.

• CD/DVD drive does not work. Error code: 39

  Original title: CD/DVD, HELP! Help! Help!  PLEASE, I BEG YOU!

  My CD/DVD drive is not reading any CD that is placed in it.  It allows you to work just fine now nothing at all, it's not same playiing or read the installation CD "s provided with the system and they are all scans CD that came with the computer when I bought it."  I am even unable to reinstall the drivers or anything else that I've seen a code # 39, I have no idea what it means.  I have never added any hardware, I installed my old program of words on this computer which is my original windows xp, but when I installed it it never gave me any problems.

  I NEED HELP, HELP AND HELPS TO SOLVE THIS PROBLEM, IT'S THE SECOND TIME I CAME TO YOUR SITE, AND I HAVE NOT RECEIVED ANY ASSISTANCE, I'M TRYING A SECOND TIME!  Help! Help! Help! PLEASE!

  Hello

  What happens when you try to reinstall the drivers? You receive an error message?

  Step 1: Run the fix it tool in the following article and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Perform the System Restore to the date where the CD/DVD drive was working fine.

• DVD player does not appear error - the driver may be corrupted or missing. Code 39, fix the driver installation fails, virtual drives don't work - same results if the material under tension

  Original title: drive does not appear, difficulty he pilot installation fails, virtual drives don't work - same results if the material under tension

  A few weeks ago, as my two DVD players (the two Samsung Lightscribe SH-S223Q of) disappeared after a repair installed, I did for the other problems (not sure if it was directly after installation because I don't notice it right away, but it was no doubt). In Device Manager, it gives the message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I tried the Microsoft Fix It tool (Mats_Run.dvd.exe) that detects the problem and says "Install device driver" in a popup, but then he says "software device driver failed to installed. At the end it says under the issue, the "CD/DVD drive is not detected" and the status of Fix 'not set '. Note that, when I boot from another hard drive (with Vista 64 on it installed from the same DVD, just a new installation) disks appear very well. Also I can boot from the drive as well.

  I can't do a repair installation, since it must initiate Windows, and I can't load the disc. I tried to update my BIOS but that has no effect.

  Recently I actually moved this hard drive to another one, with another brand of hard drive and all the rest. Just like before, if I boot from another hard drive (this one with Windows 7), the drive unit-a Optiarc AD-7230 s - looks and works, and I can also boot from the drive at startup. But since the drive hard as I want to use, the drive does not appear. Fix it, etc. Device Manager gives the same messages as before.

  I tried virtual drives - Daemon Tools Lite and Virtual Clonedrive. When I try to add virtual devices to help, nothing happens. The new drive will be displayed in the Manager of devices, but with the same error Code 39 as the real drive.

  What are my options at this point? How can I get the drive to appear or to fix my copy of Windows?

  I could solve this problem. I started in Ubuntu and deleted the existing cdrom.sys, cdrom.inf etc. files (as in Windows, they were protected and I couldn't delete them), then I copied the files from another installation of Vista I had on another hard drive. After having done that, I updated the drivers in device, disabled/enabled readers and readers management that presented themselves.

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• Satellite L40 - problem related to the cd/dvd driver (code 10)

  Hello

  My cd/dvd driver no longer works. Device Manager says: (translation) this device cannot start. Code 10.
  What should I do?

  Kind regards

  Marte
  (Netherlands)

  Hello

  Maybe this article can help http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

  Check it out!

• Error code 52 on HG62 Notebook PC - cd/dvd drive does not

  Hello

  BIOS recognizes my cd/dvd rom drive, but if I insert a disc, nothing happens. Can't find the workstation link player.  I tried to figure out how to download a new driver in the hope that the problem will be resolved, but continues to run into dead ends.

  My product number is XZ267UA #ABA and model number is HP G62-407DX notebook PC.  The operating system is Windows 7 Home Premium 64 - Bit (6.1, build 7601).

  In Device Manager, under my CD/DVD Rom drive, I get an error "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)'.

  Can someone please help with this problem?  Thanks in advance!

  Kristen

  Hello Kristen,

  Try the following.

  Shut down the laptop.  Here tap f8 as soon as you press the power button to start the Windows Recovery Console.  Use the arrow keys to select "Disable driver signature enforcement" and press ENTER.

  When windows is loaded, the optical drive now shows under "computer"?

  If it now works Ok, try restarting the laptop - if the error doesn't happen again not great then, but if this is the case, the best option would be to replace the CD/DVD driver as follows.

  1. download the utility which will add "Take Ownership" to the contextual right click menu.  The download is on the following link.

  Appropriating

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip (if you have a 64-bit version of Windows, you need this version of 7-Zip ) which can be used to open it so that you can run the Setup program.  Then just right click the folder zipped, select 7 - Zip and extract the files.  When you're done, open the newly extracted folder and you can find the utility to add "Take Ownership" to the right click menu.  Double-click it to install it and then close the window.

  2 open windows control panel, open Device Manager, open CD/DVD-ROM drives.  Click with the right button on the drive and select uninstall and click on the prompt to complete this.

  3 click on the Start Menu, open computer, double-click Local C drive, open the "Windows" folder, open the "System32" folder, right-click on the "drivers" folder and select Take Ownership.

  Just below this folder, open the folder "DriverStore", open the "FileRepository" folder, open the folder that starts "cdrom.inf", right click the ' filecdrom.sys' and select copy.

  Close all open windows and then paste this file to your desktop.

  4 still once, click on the Menu start, open the computer, double-click Local C drive, open the "Windows" folder, open the "System32" folder, then this time Open the folder "drivers", right-click and select Paste.  You should now get a prompt that the file already exists - select the option copy and replace and click on all additional guests to complete it.

  Once finished, close all open windows and reboot the laptop - see if this has corrected the error.

  Kind regards

  DP - K