On the Color LaserJet Pro CM 1410 Series HP printer paper jam

Similar Questions

• Color LaserJet Pro 400 M451dn: appearing on printed documents HP LJ 400 points

  Print jobs are coming up with points (see image)

  I have already followed the steps in the Resolution of the problems of print quality

  I printed quality and cleaning of the pages, but after all these steps, I will always have this problem.

  I've also read several forum posts, but I feel that I did not fall on a good solution for this problem.

  Hard to tell from the image, but if all points are black, then the question will be the black toner cartridge.  If it is another question, then you'd have points in all colors.

• HP COLOR LASERJET PRO M252DW: HP COLOR LASERJET PRO M252DW never able to print without problem

  M252DW running on WiFi with three computers Win10.  Regardless of the computer that I use, the printer doesn't print.  Message to print screen says not 'online' when it is by the LCD.  Can I reset or power cycle, no help.  The only thing that seems to help is going to the printer and print a test page. This step seems to help sometimes, and I get a test page and can't seem to print for a period of time.  It is happening since new (July 1015) and I'm about to returned.  FYI, I have no problem to print wireless an inkjet Canon, sitting next to the ch, from any computer.

  Any suggestions other than buying a laser gun?

  Thank you

  Mark

  Hi @Henk57,

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

• HP Color LaserJet Pro M177 MFP: HP Color LaserJet not able to connect to connected HP

  Hello

  I try to activate my printer (HP Color LaserJet M177fw MFP Pro) ePrint and much more, but I'm not able to do it cause connection problem, I guess.

  When I'm trying to 'print the information sheet', for example, the printer is not able to connect (stay on 'Sign in' loop indefinitely).

  My printer is less than a Vodafone EasyBox router, with firewall disabled and no specific barriers defined by me.

  Should I set some port forwarding (even if they should apply to ignore the firewall, when turned on) or any other specific configuration in the router?

  the same connection problem, of course, it happens when I do touch printer and console web administration, of course.

  In addition, I'll let you know that my router is not blocking access, for example, to-from the web (i.e. I am able to manage my NAS from the outside, since he admitted to a DDNS) and other local devices

  I alreay set 8.8.8.8 and 8.8.4.4 as DNS pri/sec and had an output of cycle after the series of DNS.

  My printer also has a static IP address (defined by the DHCP protocol, based on the MAC address), so not a problem, I think.

  Thanks in advance for your help,

  Lorenzo

  Hi Lorenzo,.

  To enable Web Services fumctionality, you'll need to install the latest firmware on your printer (version 20160525)

  You can locate the current version of your printer by selecting configuration > reports > Page of Configuration, the firmware version is listed under the information section on the printer.

  Updated the firmware on Linux by following these steps, but I don't know if the latest firmware is available for Linux or not, try:

  http://hplipopensource.com/hplip-Web/tech_docs/man_pages/firmware.html

  If the latest firmware is not available for linux, temporarily install the printer on a Windows PC or a my and install the latest firmware:

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Kind regards

  Shlomi

• HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

  Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

  No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

  PS: My OS has been identified correctly in the web page.

  Hi @pisca46,

  Thank you for joining the HP Forums!

  I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

  You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

  Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• HP Color LaserJet Pro M177: HP Color LaserJet M177 Pro not work small screen

  Dear Sir.

  using this printer can be 1-2 months.

  In the last time I see this little screen does not work, I mean the printer does print, scan but small screen does not.

  But if I reboot printer it works and show me the HP logo, and then when turn on it does not display all...

  Help, please

  Hi @Chumayu,

  Thanks for getting back to me.

  It would seem that something was wrong with the hyperlink.

  Please try either of these links:

  • http://ftp.HP.com/pub/softlib/software13/COL54052/kJ-141652-2/M177_Series_FW_Update-20150228.exe
  • http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443

  Please reply to this message with the results. Good luck!

• life cycle of the product of the HP Color LaserJet Pro CP1025nW?

  As far as I can see, the HP LaserJet Pro CP1025nW of color is a good product. As a tech support impression of our company, I was invited the lifecycle expected from this product. This model will be based in 'X' years? The supplies will be available for this product?

  Hello McGinnis,

  It's always a little hard to say anything with a 100% certainty about the future but the CP1025nw was released in 2010 and usually (replacements and new parts) services and support would be available for about 6 years after that. Even after this, it is likely that drivers would be released to or included in new versions of operating systems. For example, the PSC 2110 was released in 2002, and although there is no driver/software package to download from the HP website there at least the drivers included in Windows 7. About supplies (well, toner cartridges) I can not guarantee anything as such, but it is very likely that you will be able to buy those for even longer after that services are no longer available for the phone itself, an example here is a 900-series Deskjet printer. The first of the Deskjet series printer 900 printers were released in 1999 (I think) and you can still buy HP cartridges for these printers.

• I need instructions for replacing the ink cartridge on my color laserjet pro 100 mfp175nw.

  Can you please send me instructions to replace the ink cartridge on my color laserjet pro 100 mfp175nw.  I have a 126 a cartridge.  Also, where can I get a full manual for my printer?

  Hello revammann

  You can find instructions for the replacement of the cartridge to print here and you can find the user manuals here.

• HP Color LaserJet Pro M477fdn: M477fdn not taken fully supported on Mac?

  Hello, we have a new HP M477fdn.

  We have a question about printer drivers and utility software, please: why is there not a printer for the series M477 profile?

  It is a great printer, then sitting our old HP 4050dtn, wired Ethernet connection.  Firmware datecode is 20160331.

  We have two computers running Mac OS X 10.9.5 "snipers".

  We have installed the most recent HP printer software update (hpprinterdriver3.1.dmg) downloaded from the apple.com website.

  We have also installed most of the HP (hp-printer-essentials-L - 4_9_0.pkg) downloaded from hp.com.  It is necessary to download this because the program "HP Easy Start" does not, as several other people have reported on this support forum.

  In "System Preferences"-> "Printers and Scanners"-> the only option to implement this printer is "Generic PostScript Printer.  It works, but it seems to have limited functionality.

  In system preferences, we found the profile to configure fax: "HP Color LaserJet MFP M477 Pro. Fax' and that works as expected.

  In system preferences, we expected to see a profile to set up the printer: "HP Color LaserJet Pro MFP M477" but that does not exist.  Why not?  What do we lack?

  Thank you!

  Suite, for the record.

  With Mac OS X 10.9 "Generic PostScript printer" is the only option.

  The M477fdn works with Mac OS X 10.9, and as seen below, you miss a lot with "Generic PostScript Printer."

  We tried another Mac with 10.11.2 "El Capitan", which, at the time of writing, is the latest version of the OS.  Yet once the program 'HP Easy Start' did not work, so we used the same "hp-printer-essentials-L - 4_9_0.pkg ' downloaded from hp.com.

  The only additional functionality that we see to print with Mac OS X 10.11 is a check box "Printing black & white."

  Your mileage may vary.

• color laserjet pro m252dw: How do to return/difficulty recent update of firmware for hp color laserjet pro m252dw as now does not

  My printer color laserjet (color laserjet pro m252dw) no longer works due to not recognize a black cartridge to third because of a recent update of the firmware. Error given is 'Supply memory error'.

  I already looked to the top of the page of Software Support for this printer, but new and recent firmware update is not released/listed, only the firmware upgrade market is given.

  I'd appreciate advice and instructions on how to return/repair my printer no longer print.

  Can you please advise on which firmware update to install instead to get my printer back in the order of operation?

  Thank you very much

  Geertje

  PS: HP: how VERY boring; next time that I'm in the market for a printer I have will conduct the review of my options

  According to the other thread that I have commented on the user managed to solve the problem of roll back firmware version 20160331 to 20150716 .  Unfortunetly the user did not comment if the old version of firmware is out so that we can share a simlilar solution.  It may be that this person had a copy archived in offline mode or found another source outside the HP support Web site.

  At least you can get an older version of firmware all the steps that we share for the firmware downgrade won't do you no good.  I'd be careful to search a German site for firmware updates.  HP has put regional locks in place according to international contracts, that they do to market their products in a given region.  Using a German firmware on a printer WE made may have strange side effects on what types of cartridges are allowed.

  What is perhaps a better use of your time would be to contact your 3rd party cartridge company and see if they can send you a cartridge that is compatible with the new firmware.  Chances are that they have seen the same problem with other users and already have a chipset to work around the problem.  In this way, you can stay on the newest firmware and continue to use your favorite too cartridges.

• Color Laserjet MFP M176n Pro: Color Laserjet Pro MFP M176n stuck on initializing, Toner carousel will not go

  Hello

  Our Color Laserjet Pro M176n MFP is stuck at initializing, since the last time that the yellow toner cartridge has been replaced. After the replacement of the cartridge, the toner carousel turned, started making rattling noises and then stopped. She does after every start. It seems that there is something blocking the movement of the carousel, since I can't move it even manually as described in of many other forum posts on similar problems. Is there a way to access the back of the carousel to see if there is something blocking it from moving?

  Thanks for letting me know @samuelm.

  I don't see any other way to access the tonics. The printer will need to be repaired. Thank you!

• Color LaserJet Pro M177fw MFP: HP Color LaserJet Pro M177fw MFP is not not color copy

  Hello, I have a HP Color LaserJet Pro MFP M177fw, when I try to copy in color mode, the printer gives me the newspaper (on the LCD screen), color copy is limited. I did not have a password for the printer. and this error is seen when you use both scanner feeder and flat bed.

  I appreciate your comments and thank you in advance for your help

  Best,

  The gesture would be to try to restore the default settings of the control panel of the printer.  Conflicting configurations on disabling color copies would be destroyed and normal again.  Resets are normally under the admin menu or the control panel service.

• Color LaserJet Pro 200 M27nw MFP - problem scanning ADF

  Seems to me a new Color LaserJet Pro 200 M27nw MFP running on a PC with Windows 8 and have come to realize that whenever I scan from the ADF Document (CAD), no output file is generated. The original document is drawn in by the document successfully feeder and the printer display indicates that the scan is ready. However, no analysis file is generated. This happens regardless of know if I send the output to USB or to e-mail and if the original document leaves simple or multiple.

  Interestingly, the ADF works fine if I try to produce paper copies, in other words, the printer is able to pull in the leaves o FRENCH original of the document in the ADF (as this either alone or several sheets) and to produce copies of the original successfully. Furthermore, I have no problem to scan multiple or single sheet documents when the original document is loaded by the Scanner flat, rather than the document feeder Scanner.

  Appreciate any help. Thank you

  Stephen

  HI @StephenScerri ,

  I see by your post that when scanning from the ADF there is no output file containing the scan which is generated on USB or e-mail. You can copy the ADF and scan successfully of the bucket. I would like to help.

  Is this printer the Pro 200 M127nw MFP Laserjet

  I have provided a document for how Scan: Windows 8

  When you scan from the magazine, you get an overview of the analysis of the computer software?

  What is the scan preview, but do not save it to the computer?

  What software are you using to scan?

  Try saving the scan on the computer, if you get a preview, to see if it will save the scan it.

  Please provide detailed results if you're still having problems.

  Have a great day!
  Thank you.

• Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

  I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

  1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

  I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

  My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

  Please help, even the HP sales technician unable to answer me to this questation.

  Hello

  The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

  Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

  http://h10032.www1.HP.com/CTG/manual/c04475955

  You can download the HP Universal Print Driver below:

  http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

  As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

  It is a customized operating system version includes only the components of the operating system selected for specific needs.

  Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

  Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

  Kind regards

  Shlomi