Comment after the statement commit.

Similar Questions

• Invisible comments after the last update - help?

  (I moved this to its own thread because it's not exactly the same problem as one that I answered):

  2 our group Mac users comments 'invisible' since the upgrade to the latest version of Acrobat Pro DC (2015.016.20039). and Adobe Reader. You can see the comments in the comments bar, but you don't see them anywhere on the page. It will move to the point where the comment should be, but it will not show the inscriptions on the PDF file. Here is an example:

  

  The same problem occurs even after removing all preferences:

  

  Does anyone else have this problem of comments after the last update? It will sometimes show bubbles of comments, sometimes show the insertion points and shows almost never strike thru. It's weird and incoherent.

  We use a WebDAV server to store our comments, if relevant. Two of us on OS X 10.11.4.

  Hi all

  We have released a hotfix that resolves this problem on comments on zoom-in and zoom-out endangered today. If you're not already updated to the latest patch, simply open Acrobat and visit help > check for updates to apply this hotfix.

  More details about this release and bug fixes is available here: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-june-02-2016.html

  Please give it a try and let us know.

  Thank you

  -ashu

• I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  The field calculation order is probably not set correctly. The specific configuration procedure it depends on which version of Acrobat you are using. Acrobat 11, you would go first in forms editing mode (Tools > forms > change), and then select:

  Tasks > other tasks > set field calculation order

• backkey does not work after the state change

  Hello

  I have a simple vision containing a "Channels" list in the State and a histogram in State "Charts".

  This point of view has an assigned custom backkeyhandler that simply changes the status back to 'Channels' if backkey material has been activated in mode "Charts".

  The application starts and presents two items in his list.

  If I touch one of the its entry, I load the data for this article and change the "Charts" view that displays the bar graph.

  By pressing the previous button does nothing in the emulator and brings back me to the homescreen on my nexus s.

  But if I touch the graph bars once before pressing the previous button, it takes back me to the State "Charts".

  Using the debugger with a breakpoint in the confirmed following function, this function will be not be called after a state change if I don't touch the graph bar.

  If it is possible to use two views for the presentation of the list and graphics, I need the backkey to work in different States, because I want to use the States to

  use different layouts for tablets vs phones.

  Any ideas?

  Michael

  protected

  function view1_backKeyPressedHandler(event:FlexEvent): Sub

  {

  TODO self-generating method stub

  if (currentState == 'Charts' ) {}

  Event.preventDefault ();

  setCurrentState)

  'Channels' );

  }

  }

  Hey,.

  The problem is that the focus of the scene is directed to the list, once it has been removed from the display list.  Here's what happens:

  1) tap on the item "Item 1."

  (2) stage.focus is automatically set to this article

  (3) change the graphics state

  (4) list is removed from the display list

  5) press return

  (6) no event is triggered because of the list has the focus but is not on the display list

  To work around this problem, set to null stage.focus just after changing state.  If your list change manager would look like this:

  protected function list1_changeHandler(event:IndexChangeEvent):void

  {

  setCurrentState ("Charts");

  internship. Focus = null;

  }

  In my internal tests with 4.5.1 this solves your problems.

  Let me know if this does not work.

  Chiedo

• How do to execute the statement commit in a procedure possibly?

  We have a procedure which has DML operations and at the end there is a statement commit.
  I want to execute the command eventually commit.
  As when the procedure is executed directly to execute the command commit, but when this procedure is called by a trigger does not commit.
  As you know validation operation is not allowed in triggers.
  How do I understant the code is triggered by a trigger or another (or another procedure manual exec).
  I'm looking for the word reserved who solve my problem. As the INSERT, delete...
  
  Serkan
  Thank you.

  Add another 'CALLED_BY' parameter to the procedure and have the procedure call or fill it a trigger.
  If you do not want to change another existing code, by default to NULL then existing procedures do not have to fill only relax, but it can be changed from its own name or just the string "TRIGGER."
  The procedure then checks CALLED_BY.

• Need to retrieve the string after the 2nd comma.

  The input string: "CN = Beard\, of Tracy, OU = operations, OR = HPUsers, DC = HealthPartners, DC = org"

  Output string: OU = operations, OR = HPUsers, DC = HealthPartners, DC = org

  Select substr ("CN = Beard\, of Tracy, OU = operations, OR = HPUsers, DC = HealthPartners, DC = org', instr (" CN = Beard\, of Tracy, OU = operations, OR = HPUsers, DC = HealthPartners, DC = org ',','") + 1") twice;

  I tried this. But it is issued by the 1st comma.

  Select substr (str, instr(str,',',1,2) + 1, instr(str,',',1,3) - instr(str,',',1,2) - 1) third_one,.

  substr (STR, InStr(STR,',',1,2) + 1) third_to_end

  from (select "CN = Beard\, of Tracy, OU = operations, OR = HPUsers, DC = HealthPartners, DC = org" str)

  of the double

  )

  
  

  THIRD_ONE	THIRD_TO_END
  OU = operations	OU = operations, OR = HPUsers, DC = org, DC = HealthPartners

  Concerning

  Etbin

• I uplaoded a shared review in a digital system and cannot see all comments after the file is deleted from the review tracker. What is going on?

  When I do not remove the review of the Scout, the comments show. I don't want to use all my memory on the conservation of the comments in the review tracker!

  I think that this is on purpose.  The review of files is deleted on the server if the author removes their "Sent" in the Adobe Tracker program review file review.  What we do is: once the review is completed, create a copy of "archives" that has the comments embedded permanently. Then you can remove it from your tracker, which removes the review and comments. Adobe sees comments shared as temporary spaces, I guess. Logic, if you look at it this way.

  If your procedure requires to keep a review will never, well, I guess you need to keep in your tracker.

  You can hide the old comments by creating a folder and moving them here (right click "sent", "create a new folder"). I don't think it's "with the help of your memory".

  Roger

• vCenter 4 - market of comments after the reboot of the host

  When you change the settings on clients to start after restarting the host?  I'm running ESX 3.5, vCenter server 4.

  Hello.

  In vCenter, go to the host, click the configuration tab.  Choose the "Virtual Machine Startup/Shutdown" option under the software section on the left.

  Good luck!

• Lose the calibration after the calibration step

  This morning, I imported a VBAI State in an existing algorithm and registered as a new algorithm. Then I noticed that I wasn't getting any measure calibrated (not available) in the State imported... or in all the previous States, expect one step of tool Caliper in the first State after the State of calibration. Passes calibration, but regenerated calibration just in case, but no change, I get no action calibrated after the 2nd State. I restarted VBAI... no change. I returned to the old routine... same problem! And, no, I'm not recalling an image in the buffer after the calibration step, but VBAI is as if I do not have a calibration. I am at a loss for ideas of how restore my calibrated measurements, suggestions? BTW, my system resources Manager shows that I've got about 26 calibrations in my system, no chance that older calibrations could have an impact on my current calibration? Thank you, Eric

  Eric,

  We were able to reproduce the problem and the CAR 328907 file. It will be addressed in a future release.

  Thank you.

  Christophe

• Do "request failed: ' error after the workflow run 'assign a state change.

  I try to start a workflow that sends an email once a machine is put into operation.  A simple task, I think.

  I have installation vRA and vRO and am able to supply machines form vRA before making further changes.

  In vRO, I ran the workflow of customization of the vCO 'Install', and the workflow "to assign a workflow of change of State of a master plan and its virtual machines.  After you run the last workflow, I get the error "'request failed: not found YUNoWork and perhaps even deleted before commissioning end." when you try to configure a machine to. "

  The workflow of messaging works on its own, and after the execution of the workflow «Assign a state change...» ", I see not updated the property of 'WFStubBuildingMachine' on the action plan.

  Any comments would be greatly appreciated!

  The issue was that endpoint vRO was not added to the vRA.  After you add endpoint and the taking of the inventory, the problem has been resolved.

• Hello world? I wonder where we can see the State repaired our phone, after that send it for warranty repair?

  I sent my iphone to warranty service for more than 20 days and still not recover.

  I wonder where we can see the State repaired our phone, after that send it for warranty repair?

  Thank you and best regards!

  You will receive emails with updates from Apple. Have you received one indicating that they have received your iPhone?

• Module NI 9403 terminal State after the beginning of task

  Hi all

  We have some problems with a relay connected to the NI 9403 module card. There are probably a few Chin-ups correct definition outputs during the initialization of the 9403 (high logic out the relay).

  After feeding the 9403, no relay are activated, which is good. If the default value of the input terminal has no consequences.

  However, directly after the Start the task defining the outputs as 9403 (without writing again to real data), all relays are activated. This behavior is independent of the 'InvertLines' property and thus independent of the default logic level.

  My question: what happens with the terminal type (and the input impedance) during the market and directly after starting the task to DO? Does it change to a situation of three States? And he leaves the tri - state after writing the first data word?

  Can we resolve this problem by adding 4 k 7 pullup to the terminals?

  Thanks for the help!

  Martin

  Hello Martin,

  The best way to solve this problem is to use a pull-up resistance. Then, you can start the task unit and lines appear at the bottom. The lines have a nominal input of 50kOhm impedance. And not the 9403 does not work in a sort state.

  I hope that the resistance will solve your problem! I will close this topic at the moment, but if you find any problems or have any other questions, please keep posting on this subject.

  Best regards

  Jarmo Levo

  Technical sales engineer

  National Instruments

• binary passage replaces the State after commits

  I have a binary switch unique control of four similar processes.  I use an EVENT_COMMIT to trap the change in his condition.

  However, I notice that because of hardware lag on the side of the output, the State of the binary switch (off to ON) takes a long time to change.  Indeed, visually LabWindows is not updated the State of GUI control until after all the stuff that happens in his recall.

  This seems a strange behavior for me.  The help topic for the control States:

  If the binary switch mode is warm or validation, a validation event is generated when the binary switch is active and you change its status.

  That does not imply that the GUI would lead the control in another thread, while the callback is processed?

  I also tried EVENT_VAL_CHANGED, but who behaved the same way.  Is there another type of event or mode of operation I could try so that when the binary file is changed, the GUI is updated immediately and the callback is processed at the same time?  I don't want that there is some lag so that my user is trying to hit a second time the binary!

  ElectroLund ha scritto:

  That does not imply that the GUI would lead the control in another thread, while the callback is processed?

  No: the Visual representation of the control is updated at end of reminder, so if the recall is long to run, you don't see the switch state change until the treatment ends.

  You can inform the user that something is happening by using SetWatCursor (1) early reminder and SetWaitCursor (0) to end of reminder, or force an update of the UI calling ProcessDrawEvents () somewhere in your code (but if there are several GUI updates in the meantime time can slow down the recall in a moment of junk.

• After the new update list of comment is in black and white. Is it possible to bring back the colors?

  Hello

  After the new update Adobe Acrobat DC a few days ago, all the comment sign on the comment bar, as well as the list of comment, are in black and white. Making it harder to browse the various comments (without filter) as it is difficult to distinguish between the various comments.

  

  Is there a way to bring color, just like in the previous version of DC?

  Thank you

  Daan

  Hi % 20Visser Daan,

  It is a behavior designed demand after the recent update.

  However, if you wish you can fill out the feature request for the same thing here: feature request/Bug Report Form

  Kind regards

  Meenakshi

• I have CC lightroom and Photoshop subscription but after the expiry of the insralling on my laptop the app States of trial CC - there was a previous trial on this pc

  have CC lightroom and Photoshop subscription but after the expiration of the insralling on my laptop the app States of trial CC - there was a previous trial on this pc

  Hello

  Please refer stop creative Cloud 2015 to return to the mode of trial

  See also problem with CC Photoshop licenses to rename the hosts file if necessary

  It could be useful!

  Kind regards

  Shelly