Compaq start up/cq58 vibrateson model

Similar Questions

• Compaq Presario CQ71 Ser: CNF01002QT model CQ71-4142F - Dead - no power supply - does not start - no led

  Hello *. *

  First time here...

  Compaq Presario Notebook Win7 32-bit - 4 GB DDR2, aged about 3 years?

  A customer brought this with virus / malware issues - arranged.

  On start-up, the bios made regular account that the HP OEM battery must renew. Not difficult technical question here.

  Powered on the laptop without the battery and the pc has stopped completely after a few seconds.  No beeps, no LED. Suspecting power, the original showed 19.* * volts. Ok.

  Bidirectional p - s for another check the jack plug connection. No change, tried jumping jack plug connection.

  Out two-way RAM for good, no change.
  Two-way 2032 battery of the bios for good, not change.
  Removed HARD drive, no change.

  Non-powered from DC or battery, depressed and button who was held for at least a minute, without change.

  The bios battery removed for 30 minutes, without change.

  Fan do not get stuck.

  No attached devices.

  Remarkable:

  Without battery : white DC power LED stays on for about 5 seconds. And then off.

  Old battery included: white DC power LED does not illuminate.

  I did not remove the optical drive, because I think it's ok. Works fine (or used to).

  I am familiar with this series of Presario laptops / laptops and while I have tried everything I know, I was wondering if, before I have conviction as having a short-circuit motherboard / failure, is there anything else I can try with this model of HP laptop before I am progressing with the send for repair of component.

  Thanks in advance

  Nick

  Freelance technician PC technical support

  Compaq Presario CQ71 CNF01002QT / WR067EA #ABF model CQ71-4142F - Dead - no power - no Boot - no led

  With everything else has been tried, it does seem to be a hardware problem at the moment. It is more than likely isolated pay-per-view system, based on the symptoms. I'm sorry.

• Compaq CQ58 - 299EV model of updated video card and driver for win7 64 bit and ram upgrade

  Hello

  Since I was my compaq laptop (about a year), it was windows 7 64 bit operating system inside, even if the manual was for windows 8. So, when I looked up initially for up-to-date drivers I couldn't find support for win8, but I chose not to because I saw tons of compatibility issues with this model of laptop. Well I don't want to update soon, so I would like to know what are the latest drivers I can find for my model for win7 64-bit.

  So, what model of video card has it built in (it just says: "Intel(r) HD Graphics"), so I can find the right drivers for it?
  Also can I put my ram? There are now 2 GB.

  Thanks in advance.

  Since it is a Celeron processor it comes:

  Intel HD Graphics (on models with Intel Pentium or Celeron processor; supports DirectX 10)

  They don't give him a number. The processor is based on the Sandy Bridge architecture, so any driver for the video card HD 3000 series will work.

  Latest version of the Intel driver

  This can take up to 8 GB (2 x 4 GB) DDR3-1333 SO-DIMM, like this:

  http://www.Amazon.com/Samsung-PC3-10600-1333MHz-so-DIMM-upgrade/DP/B003XN3BZC/ref=sr_1_1?ie=UTF8&QID=1413330996&SR=8-1&keywords=DDR3-1333+so-DIMM

  Here is the Manual:

  Manual

  See page 45 for the upgrade procedure.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Compaq 8510w: replacement HARD drive models?

  Hello

  I have a laptop Compaq 8510w (KE186EA; s/n CNU812285Y) with 200 MB of HARD drive installed. It is a Seagate ST9200420AS ('Momentus' family).

  Yesterday, the CHKDSK utility found some bad sectors, so I want to replace the HARD drive. This Seagate model is no longer sold. What other HARD drive models are fully compatible with my laptop? My laptop has the peculiarity of "HP Drive Guard" who takes care of my HARD drive in the case of a shock, I wonder if this feature requires a 'special' model of the disk HARD must be installed.

  I searched the web site of Seagate and other Momentus drives are listed there, but I'm not sure that they will fit my laptop; for example, none of them does support "shock protection" (or this function Seagate has nothing in common with HP Drive guard?).

  UPD: and I also wonder if I can use an SSD, and if yes - what settings should it?

  -Generally shorter readers won't be a problem, since readers usually rise in a way where the screws and SATA connectors are located at the same locations despite the height of the car. Just be careful not to exceed the height of the OEM disk (i.e. some of the 1 TB + drives that were 12 mm of height not suitable)
  
  -SATA type is not important. SATA 3 Gb/s, SATA 6 Gbps or fastest readers will work fine, because their speed will be anyway limited by what the storage controller hardware supports.
  
  D ' a generally, capacity have no impact on the production of heat. The 8510w, as a workstation type system, is designed to use the commands of higher performance. Newer players tend to be more thrifty in energy which means less heat. You should have no problem of compatibility based on the ability for any player < 2 TB.
  
  Personally, I think that the benefits of the hybrid hard disks are largely overrated. If you want real performance boost, GB SSD - well worth the money, the performance difference is day and night from a physical disk more you don't have to worry about damage to the drive drops or movement.

• Computer HP Compaq laptop and a wireless model 1359 mouse. I need how to do to activate the mouse.

  I need the place where Microsoft go to activate my wireless mouse mouse model 1359.  HP Compaq laptop.

  You are simply wanting to install?

  Install the driver on the cd that comes with it. Just follow the directions

  Install the batteries in the mouse.

  Connect the receiver to your computer.

  You are finished.

• for beginners, better start from zero or model? help please

  so I've learned dreamweaver cs4 and fireworks etc for a few months now watch lynda.com tutorials and other things. I'm a construction site (or try) to sell mixers online. Progress seem to slow down, guys recommend using these models, you can get free or pay? If so, is it worth paying for? Thank you!

  Hi, I have a certain experience, building a site of electronic commerce as a beginner, but it is not clear if that is your real goal or not what you'e says.

  Even for a regular site without electronic commerce (e-commerce, I mean having a credit card shopping cart and taking orders online via your site, etc.), always things for me as in a fog - and slowly over time, the fog clears and I can see what is happening. So hang in there.

  Whatever it is, I advise to use a model, but it means different things, in function.  In Dreamweaver, you have CSS (Cascading Style Sheets) available models from which to choose, which are a good starting point. Recently, I used one to turn my site into CSS and leave the use of the tables behind.

  As a beginner, would do you well to begin to learn the construction of Web sites using CSS right from the start. It would be a huge advantage for you. In DW, in your first Panel under the column "create new", descend to the bottom and click on the folder 'more '. That will take you to all the available models. There, choose "Blank template" and "Html", then a specific model.

  I would like to choose a model that is "fixed", which means that the width of the construction is specifically defined in pixels, as a 2 column fixed left sidebar with "."

  I heard that that fixed CSS templates (etc vs. liquid) are easier for beginners to work with.

  IF you go to an e-commerce site, I would recommend using storefront software, which gives you very good models to use - and their software works as a DW Plugin, which means it fits in the DW interface and making it easier to use. Its software allows you to insert a shopping cart interface shopping and what is e-commerce-driven in your site.

  It is a fairly expensive software, but it is also a very positive alternative for beginners in e-commerce. In addition, their models are very respectful of the designer they give the user a lot of room design to customize the look of their site.

  As a beginner, I must warn you - to have an e-commerce site, online site is difficult and it takes a sizeable presence for it work, which means a lot of stamina and a good number of products to sell.

  in any case, I hope I helped... Good luck

  Frank B.

• RTF to XSL - FO - start/end dash issues model conversion

  I use the BEEP 5.6.3 (UsBe 11.5.10.2) and having problems with the XSL - FO model, generated from my RTF model. Even though my paragraphs in my document RTF template have no withdrawal right or left, all fo blocks generated for the internal model of XSL - FO have values of start-indent and end-indent of 5.4 pt. Can someone suggest a reason why zero RTF left and right indents would generate non-nulle left and right of XSL - FO indented?
  
  theFurryOne

  Put this in the form field to the first cell of the table:
  
  
  
  

  Kind regards
  Gareth

• How to replace Windows 8 with Windows 7 on a Compaq CQ58

  Hello!

  Yesterday, I bought a Compaq CQ58 with Windows 8 on it. I would buy Windows 7 to replace Windows 8 with. But:

  1. it is posible to change 06:52 on my laptop CQ58?

  2 and if so, can I have programs default HP on this subject?

  3 and if so, how?

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  1. it is posible to change 06:52 on my laptop CQ58? YES, it is probably possible to install Windows 7 on your computer.

  2 and if so, can I have programs default HP on this subject? NO.

  3 and if so, how?

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE "Secure Boot" and ENABLE "Legacy Support" in the "Configuration of the BIOS start-up secure" on the settings page similar to what is shown below, until you try to install Windows 7.

  

  After you save the changes, the computer will ask you to confirm the changes... Accept the changes by typing the four digit code and press the ENTER"" key.

  

  If you install from a USB key and see a message of "load a driver - a required CD/DVD drive device is missing", it's because as 'System Configuration' > 'Config USB3.0 in pre-start' is set to 'Enabled '. This should be set to 'Auto '. This should clear up the CD/DVD device is missing.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start using the internal CD/DVD UEFI or UEFI-Key/key USB to install Windows on a GPT-partitioned disk. Turn on or restart the computer and press "F9" or "ESC", then "F9" when prompted. Select the source of boot UEFI you use and you press "ENTER".

  

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  From the top...

  (1) turn on the computer and immediately start typing the key "ESC".

  (2) when the MENU is displayed, press "F10".

  3) navigate the BIOS to the "System Configuration", 'USB 3.0 pré-OS Config' and the value 'Auto '.

  4) navigate the BIOS to the "System Configuration", "Startup Options" and "Secure Boot" the value 'Legacy Support' the value "Enabled" and "Disabled"

  5) press "F10" and click "YES" to "Exit Saving Changes".

  (6) computer should restart and display "Change of operating system startup Mode"... type the four digit code, then press "ENTER".

  (7) let Windows 8 boot to the top and put the Windows 7 SP1media in the drive to DVD or a USB port, then logout / stop.

  (8) to turn on the computer and immediately start typing the key "ESC".

  (9) when the MENU is displayed, press the key "F9" and then select the correct boot UEFI source (CD/DVD drive internal, USB drive, CD/DVD, USB Flash drive, etc.). ... Press any key to start the CD/DVD, if prompted.

  (10) select "Language", "time / currency ' and 'Keyboard' settings and then click"Next ".

  11) click on 'install now '... Check "Accept terms" and click "next". Click on "Custom (Advanced)".

  (12) you may need to provide Intel or AMD SATA/RAID drivers at the moment...

  (13) ' where do you want to install Windows 7? Select "Disk / Partition" with "Unallocated space", you created earlier, and then click "next".

  (14) follow all instructions and meet the need. Enter the Windows 7 key when asked.

  (15) download and install the drivers from the support page for your computer.

  After installing the drivers, please post the "Hardware ID" Device Manager (text only) for all other devices missing or unknown as illustrated in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Compaq 620 laptop: Update pre-2013 model HP Compaq to win. 10

  It seems that my Compaq laptop of pre-2013 model requires the upgraded drivers be compatible with Win 10. Anyone know what drivers are correct?

  SFP

  Sorry to be the bearer of bad news, but the problem you face is that Microsoft provides only pilots with the most basic features and what you really need for these features is the specialized drivers written for the specific in your HP PC hardware - and unfortunately, there is no driver HP Win10 for your PC. HP only guarantees the compatibility of Win10 for machines manufactured after August 2013. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
  
  This means that your PC is probably NEVER going to be fully functional under Win10 because the pilots is needs for all features simply do not exist!

  So basically, you shouldn't spend your PC at Win10.

  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Compaq Presario desktop XP-problems connecting / came with the settings and files of the previous owner

  My Director ex-chorale of the Church and his wife (was his computer) moved to Minnesota and gave me this Compaq Tower and the monitor speakers.  She cleaned me all of hers off the coast.  Well, she didn't.  She switched to the network connection and modem.  I'm low on memory.  Help support & the beginning, Compaq support and connections says "unable to connect to the server."  I have fast Internet with Comcast cable.  His modem is Gegere or something and the network connection is RealTek 97 Fast family and mine is Arris (modem).  Specifications of the computer:

  XP Edition family c. 2002 SP3

  Compaq Presario Intel inside Celeron (R)

  CPU 2.53 GHz

  248 MB of RAM

  CD player works but the DVD player does not open.  Connection is so slow that it takes 5-10 minutes to open anything.  IE8 gets constantly "stops responding."  Just like Firefox.  When you try to close a window or stop start, end the program box comes back and comes back again and again.

  Went to start-help & support-Compaq help and did some tests.  For Audio, etc. get: "Exception in DisplayRunMap.runmap.

  Only had this computer for 2 weeks and did nothing to save.  Can reinstall Norton Security Suite for Comcast and my Microsoft Professional 2007 from a cd.  Thought to do the system recovery.  This OS came with Compaq and recovery CD system recovery option and there is F - 10 System Recovery on initialize toward the top.  Are they the same?  I first have to install Windows XP on a bunch of CD?  Can't make a DVD if the drive does not open.  The button is loose and nothing happens.

  I am 63 and security social disability so can not afford a new computer, or to hire a technician.  Help, please!

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  The 'F10' and Compaq system recovery of Windows XP system recovery are the same thing. You don't need to create "HP recovery discs" before making a recovery, but you may need these disks at a later date. If a set of disks has already been created, you will not be able to create a second series and you may need to buy a game from a third-party vendor.  With the complete model number name and/or product will allow us to direct you to a place to buy these records, if necessary.

  Please click the White Star of KUDOS to show your appreciation

• My laptop keeps itself start up after a blue screen lights

  My laptop is a COMPAQ, whenever I turn it on it goes the logo of COMPAQ to a screen that says:

  "We apologize for the yhr inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. »

  It turns on and then it says:

  Safe mode

  Safe mode with networking

  Nide wurh safe command prompt

  Good configuration known to Las

  Start windows normally

  It doesn't matter that one I choose, it goes to a blue screen and tell me who. A problem has been dectd and Wondows was arrested to avoid damage. Then it shuts off and reboots itself over and over and over and over again.

  Can someone help me please?

  Looks like a hardware failure, how you proceed depends on whether you have a winxp cd real or only a recovery cd.

  Your Compaq has no test utilities that are available when you start initially, perhaps by entering a certain combination of keys? The Compaq website for your specific model will tell you.

• Double partitioned Pavillion Desktop does not start in Windows 8

  I have a desktop HP Pavilion partitioned with Ubuntu installed next to Windows 8. For the most part, I'm working on Ubuntu, half, which is fine, but I have some important files on the windows half too. Recently, when I tried to start Windows in the boot selection menu, a long stream of errors came up through the screen and put me right back to the beginning. Something along the lines of 'invalid path UEFI.

  I was also informed that the Ubuntu Startup Repair utility should work to fix, and I tried to run a live CD of Kubuntu. The problem is, the computer will not also boot from CD - I changed the boot order to make it work, but he acts as if there is no disk in the drive. I know the drive works because I used to install Kubuntu on my laptop a few weeks ago.

  Keep in mind, the computer is still usable as it always starts in Ubuntu, but I have a few applications that I use from time to time that are incompatible with Ubuntu and too intensive to use on an emulator. things like video games, software design and other. As a user of the Linux die-hard, I never thought I would say this, but all I want is my gosh - darn rear window.

  When you request support, please provide the number full name or product model of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you resolve the issue.

  The above requested information on the side, back, or bottom of your computer. , Please do not include your serial number.

  Consider DISABLING "secure starting" and ENABLING 'Legacy Support' in the BIOS. Please see "computers HP - secure boot (Windows 8)" for more information about "Secure Boot" and how to toggle the "Secure Boot" and "Legacy Support".

  Please click the White Star of KUDOS to show your appreciation

• Compaq Presario sr1720 nx goes directly to the recovery &amp; mouse &amp; kyboard is unresponsive

  The compaq Presario sr1720nx is directly to the recovery even if I hit the F6 key or the escape key start-up of the pc to the top.  Once on the recovery screen, there are three choices that are not accessible because neither the keyboard nor the mouse respond.

  I may be the culprit of the problem.  I looked on the internet to perform a recovery without a disk.  The You tube video, said to use the F6 key at startup to access the recovery console.  This proved to be unsuccessful.  When the compaq starts, it says to hit the F8 key to start the recovery program.  None of them worked.

  So, being a non tech person, I went to programs > Accessories > microsoft tools > reset to an earlier date > and reset the start to the recovery console.  My goal was to access the recovery console to perform a destructive recovery.  This has been for us hopefully correct the Compaq, which had not been used for a long time.

  Before this action, there is no problem with the mouse or the keyboard.

  The end result was the computer starts up straight on the recovery console provides three choices.  It also provides choice to hit the return key to put an end to the valuation or escape to return to the normal operating system of windows XP.

  Initially, I tried to download the recovery disc for the Compaq back to ground zero.

  If all goes well, it still may be my option.  If anyone could be useful to a naive individual, it would be much appreciated.  As the saying goes, a little knowledge is a very dangerous thing.

  Distinguished regards, Mike

  I solved the problem

  I unplugged the computer, mouse and keyboard; WAITED several minutes and plugged the above items back in.  After you enable the Compaq, he went directly to the window of recovery.  Now, the keyboard has been active to select option 3 - the full recovery of the C: drive.  Of course, asked me to restart the computer to complete the process.

  The windows XP program has restarted after the computer has finished the recovery process.

  Starting with a blank slate, I was able to name the computer, the selection of the internet service provider, etc. in the usual way.

  I add this note anyone suffer a similar situation.

  I appreciate the response.

  Distinguished regards, Mike

• Start of Satellite L300-1 has 3 takes a lot of time

  Dear Sirs

  I bought a laptop from 1 to 3 Satellite L300 there is little time and I noticed that it is too slow at startup. It takes sometimes more than any portable computer so that it starts.

  This model is like that, or it can be changed or may be downgraded to Windows XP?

  Hello!

  Here in the forum are already discussions on this problem so that you can search a little.

  There are many ways to make Windows and departure faster upward. For example of auto-start all the, you need to disable programs that you don t need, disable services, defragment your drive HARD and far.

  Of course, you can install Windows XP on your laptop. Pilots and others, that you will find on the download from Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• HP Compaq has a black screen at power up... The BIOS Corruption failure?

  I have a Compaq Presario CQ61 product: VM9496Q2X model: CQ61-319WM series: [edited by moderator serial number], which has a black screen when I turn on.  The wifi button stays red and the caps lock flashes twice.  I think that it indicates a BIOS curruption faliure.  I tried to reset by unplugging and removing the battery and holding the power for 30 seconds button.  I tried the f8 key and esc repeatly to power upward. I also tried pressing the windows and the B key and the power key, but nothing has worked.  Any help would be greatly appreciated!

  I'm very disappointed with the lack of response of an HP Service Technician.  I ended up taking my laptop to a computer repair shop.  My problem is that the graphics card has become dessoudée of the motherboard.  They have rearranged my motherboard and it works fine.  fix $ 79.00.