Computer automatically restarts and the disk driver hard name question.

Similar Questions

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• Computer automatically restarts and displays the blue screen. How can I fix it?

  original title: blue screen problem

  Hi, my computer has been restaring, and a blue screen appears.

  I'm not so technical by nature, so I hope I can get a few step by step for how to solve this problem-if I can.

  The message that I could find on the problem (s) are present:

  Problemsignature

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Local ID: 1044

  Files that describe the problem

  More information about the problem:

  Hey Mirjam Irene,

  1. What is the error message on blue screen?

  2. did you of recent changes on the computer?

  3 when was the last time it was working fine?

  4. do you have security software installed on the computer?

  5. once the computer is restarted and the blue screen occurs?

  Check if the problem persists in the safe mode and after back with the results.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem persists in safe mode, and then see the Microsoft article below and try the steps mentioned, check if it helps.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

   

  If the previous step fails, then check the event viewer for the cause of blue screen and message comes back with the details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

• error volume generic when you try to install the disk driver hard ext

  I have a toshiba satellite laptop computer with Vista Home Basic and a WD my passport essential 320 GB external hard drive

  Here's the question,

  I got the update of WD Web, its installation site and on my computer work... will not install the drivers.  I go to the Device Manager and the drive appears as unknown device.  try to update driver software, and then gets all throughout this so-called - "windows found driver software for your device but encountered an error trying to install", and then below that theres a picture of a hard drive and next it is written "generic volume". then below that it says "this operation requires and the interactive window station.

  went to disk management, any option that I click on reassign a drive letter or to reformat I get various error messages.  basically the wtf.  Ive google the issue and the error message and have tons of similar problems posted by other people, but nobody has the right solution for me - tried so much.  I called windows, they were no help, sent me here essentially.  not called WD they have no help...

  Anyone have any ideas?

  Thank you!

  Hello fighclubber25,

  a. don't you make changes to the computer before having this problem?

  b. are the other USB devices work properly on your computer?

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  My research, I find that there are several problems with the Antivirus software when trying to install the drivers for the Western Digital hard drive. I suggest that you disable the antivirus software temporarily and verify if you are able to install the drivers. Also, make sure you download the correct version of the drivers.

  Note: Make sure that you enable the antivirus software after the test. You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Connect the drive to another computer and check if you are able to load the drivers. Just to make sure that the hard drive is not defective.

  You can also check out the link that will give you information on tips for solving problems with USB devices below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Microsoft Update 3 of 3, has not finished loading. The computer automatically restarts and repeats the same continuous process

  original title: Microsoft Update 3 3 loading is not finished. The laptop restarts itself and repeats the same process continuous - not a techie - please help!

  My laptop has vista, I lit and tells me that Microsoft Update 3 of 3 has not finished loading. The laptop restarts automatically and repeats the same process continuous - I can't access the start menu or anything - what should I do?

  char1822,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  05/23 / 1107:53: 57 pm

• Relocation of CS5 after computer must be restarted and the disk isn't loading...

  I'm trying to reinstall my photoshop cs5 after that my computer had to be completely restarted because of computer crashes. Now when I put the disc in, nothing appears or is attempting to install at all. How can I regain access to my photoshop?

  You can navigate to your dvd using a file Explorer and click Configuration.

  or download the installation files

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Computer automatically restarts to the password login screen.

  Original title: when I try to start my computor, he goes to the password screen then goes to when windows starts and stops and restarts. someone has an answer please.

  Ditto above, try f4 and tried all possible answers. can not even restart myself because I just can't no matter what screen

  The other post:

  I received an email to my last question, nothing helps.   I tried f2, f12, f8. tried all modes of security. It is just where the scroll bar before your log in / password screen and stops and restarts.  There is a message appears at the end but that's just a quick flash and you can not read.

  have tried all the options in f8, f12 removal always close and restart factory reset options.

  Hello

   
  1. does the computer restart before or after you enter the password?
  2 have you made changes on the computer before this problem?
  3. you receive an error message when the computer restarts?
  4. what all troubleshooting have you tried?
   
  Follow the steps mentioned below and check if that helps.
  Method 1:
  Step 1: Check if you are able to boot to the desktop mode without failure.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Step 2: If you are able to boot to the desktop in Safe Mode, I suggest putting in a clean boot state and check.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  NOTE: After a repair, be sure to configure the computer to start as usual after the same article.
  Method 2: If the method above is not enough, you can perform a startup repair and check. Follow this link for more information.
  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
   
   

• Try to re - initialize the 2nd drive hard - but how?

  Hello
  I buy an internal drive of Hitachi 3TO for my Vista 64 system b to use as a single data storage drive.  Accidentally, I chose the option when it is time to initialize the disc with respect to the partion 2 TB or MBR.  He advanced and formatted the drive in this way and left about 746 GB unallocated.  I want to start from scratch and have all the 3 to appear as a single volume, so I think that I need initialized as TPG (as described in: http://msdn.microsoft.com/en-us/windows/hardware/gg463524).

  However, I can't have the option where I can convert it by the article.  How to start the process more so that I can initialize and format the drive to 3 TB.  Yet once, it is for the storage of data only and not for the operating system.
  Thank you!

  Found!

  http://TechNet.Microsoft.com/en-us/library/cc725671.aspx

  To change a master boot record disk into a GUID partition table disk using a command line

  1. Back up or move the data on the basis of master boot drive (MBR) record that you want to convert into a disk GUID partition table (GPT).

  2. Open an elevated command prompt (right click on command promptand then click run as administrator) and type diskpart. If the disc does not contain any partitions or volumes, go to step 6.

  3. At the DISKPART prompt, type list disk. Note the number of the disk to convert.

  4. At the DISKPART prompt, type select disk .

  5. At the DISKPART prompt, type clean.

     Important
     Run the clean command deletes all partitions or volumes on the disk.

  6. At the DISKPART prompt, type convert gpt.

  Then I'll return to the computer management screen and the disk appears as 2.79 TB disk and I can start the formatting process.  Phew.  That took a while to discover this.

• I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd

  I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom

  The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?

  http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
  Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.

  http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!

• I'm telling my legal copy of Indesign CS adobe @, but tells me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under the terms of the license, I could put on my laptop and keep

  I'm talking about my legal copy of Indesign CS2 adobe, but told me that the serial number is already active. I know that I did at the time, but the computer is dead and the hard drive is GONE. Under license, I could put on my laptop and keep a copy on my PC at home as long as I don't have use both at the same time. None of these computers no longer exists. And why adobe cannot say that it was me who did the first activation?

  It won't matter because your copy of CS2 and serial number no longer works.  You need to acquire a special version because of the Adobe stop the activation for CS2 server and other products of this period.  The links below will explain more and also drive you to the download version, you must get and the serial number, you can use for this.

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• ENVY of HP DV6 7214TX: want to Hp Dv 6 stuck on restart the notebook after adding the 2nd drive hard trolley

  I do not use blue ray. so I bought a new SSD. I put in the main area of the hard drive in the laptop and put the 1 TB hdd disk in the 2nd drive hard carriage and insert it in place of blue ray player.

  Everything work fine except one.

  Whenever I restart the computer it's stuck on the first screen on reboot.

  It doesn't happen when I stop the computer. When I hit the power button, it starts up fine. but on reboot it still stuck on the first screen.

  is my 2nd carriage of failed hard drive or there is another problem.

  Its pretty weired tha on turning off the system starts, but on reboot it stuck on the first screen after startup

  Any ideas what solutions are

  Thank you

  Fassi Fihri

  Hi @FarooqAbdullah,

  Thank you for visiting the Forums HP's Support and welcome. I watched your problem on your laptop dv6-7214tx HP ENVY and issues with a start with your new SSD. You can reset the BIOS with this document by selecting the reload the default BIOS settings. Who has helped others as she seeks the new SSD.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system.

  I hope this helps.

  Thank you.

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a msg says: "Windows did not find antivirus software on this computer. What should I do?

  Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13.  Today a mesg says: "Windows did not find antivirus software on this computer.

  What should do?

  Download another copy of McAfee and activate it with your existing license.

  Ask for advice here: http://service.mcafee.com/Default.aspx

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

  I have CS5 drives that were installed on an old laptop which is dead. I would like to reinstall this product on a new computer. I installed the disks on my computer, but I can't activate the product. Can you help me get a new serial number?

  As far as I know, Adobe won't give you a new serial number

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761