computer Internet printing

Similar Questions

• Internet problems WRT54G2V1 computer and printer/2

  Hello world

  I am at my wits end here, I have been playing with a new printer for the last 8 hours and hopefully someone will have some suggestions.

  This morning, I bought a HP J6480 AIO printer.  I have a gateway laptop (vista) and a dell laptop (xp). I could not the dell connect/recognize the printer, but the front door recognized instantly, wirelessly printed, etc.. Trying to hang on the second computer, internet came out. I finally called linksys tech support, we got everything up and running - wise internet - but neither laptop was connected to the printer.  I just got the dell connected to the printer for the first time and now I can't the gateway on the internet.  Connect wirelessly to the router, it is connected with limited access.  Sometimes it says it is connected to my network, other times it is said 'unidentified network' and there's always the yellow triangle with the! mark on the icon inside two computer.  I tried calling linksys but put me on hold and decided to try here.

  I want to use my WRT45G2 router to wirelessly access the internet and the printer since the two laptops. It won't fly if I have to reset the router after every time I have to use the printer, but the whole point to get this one was the wireless option.

  Does anyone have any suggestions?

  Thank you!

  1. You must configure your wireless and wireless on your router security.  You must give your network a name usnique so that you connect to the correct network.
  2. You must configure your working groups in your computers.  They must be on the same workgroup.  Once this is configured, you should see two network on Vista computers and discovered computers in the workgroup under XP.
  3. Install your printer by following all the steps in the HP wireless configuration guide.  If you do not have the guide download from the HP Web site.
  4. You should see your computers and printers in the DHCP in your router table once everything is connected properly.

• try to reinstall CS on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. My hard drive crashed with all my software on it, then

  Hello - I'm trying to reinstall CS3 on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. (compatibility).  My hard drive crashed with all my top software, so I replaced the drive and now trying to reinstall my CS3. How can I do this without an internet connection? It will not take my initial activation codes, and this computer is not online. pointers out there?

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• I have a Canon 32-bit multifunction printer that worked with my old laptop. Again 64-bit works more computer portable printer nsns, what I can do.

  • I have a Canon 32-bit multifunction printer that worked with my old laptop. Again 64-bit works more computer portable printer nsns, what I can do.

  Hello

  Go to the Canon Website and search for your current operating system 64 bit printer drivers.

  If none are available, it may be time to upgrade your printer.

  See you soon.

• Error: There is no communication between computer and printer

  Original title;

  printer not printihg after the installation of new updates

  I get messege there is no commacation between computer and printer

  Hello

  1. What is the brand and model of the printer?

  2. What are the updates that have been installed before the show?

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  3. have you checked the status of the printer in Device Manager?

  Open the Device Manager

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  4. what operating system is installed on the computer?

  You can Open the printer Troubleshooter and check if it makes a difference:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can follow this link and check if it helps.

  Printer in Windows problems

  Let us know the result!

• When I restart my computer the printer prints once

  When I restart my computer the printer prints once after that I get a message

  indicating an unknown error has occurred I updated the drivers and of the United Nations and re installed no change?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• My printer is connected to two computers. I find that the second computer does not print unless the first computer is also on. Can I get every computer to print without the two be on?

  the printer has been first on windows 7 and second on windows xp, because that's the way I was told iy had to be done. But I thought that each computer can print separeately withou t windows 7 being on.

  Hello

  1. How is the printer connected? This printer is on a network?
  2. this configuration was already working before?

  You must configure a print server. If your printer is a network printer, you can connect it to a router, and all computers connected to this router can use the printer individually. If the printer is not a network printer, you can buy the equipment to turn it into one.

  See the articles below for more information:
  http://support.Microsoft.com/kb/308028
  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  I hope this helps.

• OfficeJet 7500 has E910: error scanner E910 Win7 Officejet 7500 has "not detected any computer" & Doc printer/Scanner has no help

  I just moved my printer/copier/scanner/fax, E910 Officejet 7500 has on one side of my office to another.  In the process the power and USB cables have been disconnected.  Same USB cable as before, connected to the same port on the computer.<3 meters="">

  Re-installed software CD.   Downloaded updates.  Several files in the HP folder are displayed with today's date, so clearly that something happened with the update.

  Printer is now recognized and will display the files on the computer.

  Photocopier creates copies.

  ... Scanner not scan.

  When a document is placed in the tray sheet or on the glass, "no computer detected" error message is displayed on the HP device.  [Note: this computer can send commands successfully, if clear communication goes]

  On the computer, when the devices are searched and displayed, the HP device appears with any other printers/Fax.  Scanner is not mentioned here - but when the details are drilled for, said that it's in the category 'printers, scanners '.

  Googling suggested tool print and scan doctor, so I went to that and downloaded.  When you click on it to run it, it says that (paraphrase) some files are missing, wants to download them (value 121 mB). So, I click Yes or then, or whatever, and it brings them.  Notice I just do a full install and updates downloaded, that more can he want?

  Then, nothing happens.  Help HP screens suggest that he must now ask me what function I want help or ink on.  Nothing, no suggestions with little green checkmarks or advice of the error.

  So I went down there is text on what to try.  Some apply - after that the doctor Download 4 or 5 times and do the suggested software download it 4 or 5 times, somehow unnecessary.  Disconnect and reconnect the USB cord - done that, at least the print function does not disappear, but the scan did not return.  Restarted the computer and printer HP - has done that, no difference.

  This is not the first time that the scanner was not updated on the computer at the other end of the cable.  In the past and it has been a while, memory, is this activation of the analysis of the computer set the scan to life function, but I do not see this option.  The computer "HP Scan" displays an error message that the HP Officejet 7500 E910 was not found, as does the Windows Fax & Scan.

  Why, if the printer can be found, and it is in the same unit as the Scanner, the scanner will not appear?

  Telephone support HP identified the problem: no drivers.  Took about 15 minutes for a useful person straightening things.

  Note that I had uninstalled the printer and its software before re - load the software.

  As part of this process, I had identified with HP via different input strings the OS of the computer and the details of the all-in-one device model number.  So why couldn't HP identify the drivers concerned and ask them to download also?

  Anyway, for now, what I need is working.

  Detective Conan

• Printing preference is defined in gray scale, but all internet print in color?

  I have my preferences print equals quick project and grayscale to save ink on printing all day, which works fine when I print from Word.  However, when I print the content of the internet, it prints in color.  Are there different setting for internet printing?

  Hello Lynnb62,

  No, there aren't any different settings for Internet printing. I always find that none of my preferences actually stick. They can do so at the time of printing, but as soon as the printer is turned off and then turned on again all preferences are lost and return to the default value of the printer who, as you might have guessed, are designed to use as much ink as is humanly possible.

  I'm afraid when you print from the web, you will have to try to remember to re - define your preferences via the print options to ensure that the web page are, indeed, printed in gray, quick project, rather than the normal levels and color.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• HP LaserJet Pro CM1415: Printer will only print a single document. Bloggy queue and I need to restart the computer to print

  Printer will only print a single document. Bloggy queue and I have to restart my computer to print more than a single and repeat for each print job... very annoying. She's been doing this for printing the PDF, chrome, Word document, etc.

  Hello.

  Please, try the suggestions you find here:

  http://support.HP.com/us-en/document/c022054777

  Dovid

• HP Pavilion: Computer says printer HP deskjet F2180 door open, but it is closed

  Computer says printer HP deskjet F2180 door open, but it is closed.  Printer seems to be happy and work OK (no lights telling me that there is a problem) and when I took the cartridges (21 and 22) and then put back them in the printer, he printed the document scan for me.  It's just that, in the section printer HP on the PC, it says 1 document in the queue and printer: door open.  I have tried everything - everything is off for 30 seconds, etc., and time is of the essence that I have things printed on Saturday pm and collated etc..  Help, please!  Thank you, Lindaeleanor.

  Thanks Musicman - I was so desperate that I wore to try anything.  In the end,.

  Click on: Control Panel

  Click on: computer problems

  Click on: use a printer

  It came up with a window named troubleshoot & help prevent problems,

  Click on: next and EXPECTED

  Although at the end it said it could not find no problem - after a second or two the printer suddenly burst into life and it worked great since and I could get my printing done on time!

  Thank you very much for your efforts in replying to me.

  Best regards, Lindaeleanor

• When I try to print a document on internet printing is very small

  I use a printer Deskjet 6988 with Windows XP.  Recently, when I try to print a document on internet printing output is very low.  This used to be the case.  The printer is configured to print actual size.

  You can check the scaling of the page in Firefox. You can do this by clicking on file in the upper left corner of the screen. Then select Page layout. You will be able to change the size of what you want from there. Hope that helps.

• I have my printer connected to my router via a usb cable... I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print on my prints through the router?

  I have my printer connected to my router via a usb cable. I also have my (Vista) computer connected to the router by ethernet cable. How can I set the computer to print to my printer via the router?

  Usually, you need to install the printing software / drivers on your PC, configured / installed specially for a printer "remote" (its an option in the installation of the printer software)

• Hp deskjet 3050 a device I can not get my computer to print to my printer how do I set this up

  I have a Hp Office jet all-in-one printer 3050 and Hp laptop and I'm having problems to make my printer and computer to print my documents from my computer on my printer can you help me.

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems:

  http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer difficulty of:

  http://support.Microsoft.com/GP/printing_problems?EntryPoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• check another computer internet history if both work on the same router?

  check another computer internet history if both work on the same router?

  Hello

  There are two ways to access the files between computers in the same network or group work and sharing.
   
  (1) if the files and folders specified are shared within the same workgropup.
  For reference:
  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
   
  (2) you can take remote access of the other computer and check for the files and folders specified on the other computer.
  For reference:
  Remote Desktop connection
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
  Remote Desktop connection: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions
   
  Hope this information helps.