Computer itself restored to the State of the plant.

Similar Questions

• Can I use the the same validation key that came with my computer is restored after the installation of a hard disc more?

  I bought a refurbished Dell desktop and you want to install a hard drive, can I use the the same validation key that came with my refurbished computer and if now what can I do?

  Original title: renovated

  Yes, you can, but I recommend that you use the following method to pass safely the license to drive bigger hard:

  http://notebooks.com/2011/02/16/how-to-move-Windows-7-to-a-larger-hard-disk/

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• How to use "System Restore" using the USB boot-able.

  Some updates are being installed and I have turned off, now Vista does not load normally. Instead, Windows loading process is interrupted by error 'blue screen of death '.  Now, I have a USB boot-able with Windows Vista Home Premium 32-bit. When I boot with my USB boot-able and select 'Repair your system', it shows the dialog box 'System Restore Options. " There are no BONES in the list, so I click on "Load drivers", an "Open" dialog box appears.

  1. in the "Open" dialog box, I don't know which file (s) to locate.

  If I cancel and click on 'Next', another windows appears. Then, I select "System Restore". A message pops up saying something like: «to perform an offline system restore, you must specify which Windows installation you want to restore...» For example, enter the command:
  Rstrui.exe /OFFLINE:C:WINDOWS.

  2. I don't know where I have to give this command.

  My HP dv6700 s system. When I bought it, Windows Vista Home Premium 32-bit was already installed. But I do not remember the activation code now. And so I can't even contact support and help from microsoft.

  Kindly help me.

  HP gives you the opportunity to make the Vista startup repair from the diagnostic menu? I thought that this was the case. Have you checked? There is a reason for the message warning about don't turn off your computer while updates are being installed and you may need to restore the State of the plant.

  To answer your original question, the drivers that are sought are disk SATA controller drivers. You get them from HP website and set on a (non-bootable) USB to use at the point of "pilots charge."

  If you can not solve this problem, you can copy your data to an external hard drive by booting with a Linux Live like Knoppix or Ubuntu distro from a bootable USB. Then restore the computer as long as the plant. HPs factory to start the recovery process by pressing F11 when the computer starts, but there will be a message about what function key to use.

  http://www.pendrivelinux.com
  http://www.Knoppix.NET

  MS - MVP - Elephant Boy computers - don't panic!

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I can't open any programs on Firefox I installed on my other computer after restoring the computer.

  I've been a Firefox user for as long as I remember and don't remember having these problems until I insttaled 34.0.5 I mainly used Google as my search engine and sometimes of yahoo.

  Whenever I try to open say yahoo or google to install as well as many other sites of the first ir goes to the speed of google search yahoo search as I put it as my search engine. I don't like the fact that I have no choice I want to default search engine. Can't I noticed that all means to eliminate all other Vosteron, it's the first probelem.

  I search for yahoo.com, so I can install it on the computer and get this error message or warning with a yellow box at the top left with a crossing guard fig. He said: this connection is Untrusted. I get it again and again and again, on any other site I tried opening in the past three days.

  I don't know what to do, I have tried everything: config and reset the SSL 2-to-1. I still get the connection it is Untrusted. Even tried to add an exception, but it still gives me this annoying message. At this point, I don't know that I have some kind of malware, or what. But I did not put many programs back on the meaning of the computer I restored Win 7 on a new hard drive.

  I hope you can help me get this fixed annoying problem once and for all. In the contrary case, it Safary.

  Restore the Firefox default state

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information. Consider using it before going through a long troubleshooting process.

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• Material of restoration to the original state of the manufacturer will make legitimate recovery discs work?

  Hello.

  Back story:
  I tried to create a system to dual-boot with Windows XP and Windows Me on a PC from Hewlett Packard, model a350n, to facilitate access to the old and more recent examples of software in my computer.  Operating systems that are installed properly, however, when running Windows Me, I noticed that the system has detected a large number of hardware problems and a number of missing drivers. I have no problems the first time I installed Windows Me, and I realized that this must have been the existence of partition recovery console Hewlett Packard, who was at the current time, where the Windows Me operating system can locate the necessary drivers for the PC to operate.  Since the deletion of this partition (which I foolishly declared unnecessary from there), problems of hardware in the BIOS, PCI slots, sound cards, etc. exist in abundance.

  Issue to be addressed:
  The main concern is this: I have no legitimate recovery CDs that I received directly at HP, but when I use them, even if they have worked in the past, I thought that the discs do not support my HP model.  I've made several changes to the hardware (for example, replace the graphics card, some CD-Rom drives, additional memory, along with other things).  Cancellation and so restore the material to the original state of the computer will CDs recognizes the HP model once more?

  Thank you very much!

  UPDATE: I tried to return the PC to its original state by removing the extra material and restore that which has been deleted.  We had another similar model of HP with similar CD - RW, CD - R and DVD - ROM drives, so I'm only 95% some that I replaced those that actually are came with this PC.  It would make a difference?  The result is that the recovery disks, which are legitimately HP, not home-made copies, and which were used successfully in the past in this same model, has not recognized the model of PC than they were designed for, even if they are a match.  This may be the cause?  And what can I do about it?  My backup files can be done quickly and efficiently, if I don't mind having to do something eventually destructive, as long as I get those recovery CD to do their job.  It is essential that I restore the PC to its factory condition.

  Thank you!

  Hello Taran_Wanderer,

  Unfortunately there is little that can be done on the side Microsoft.  It's HP to provide you with the disks appropriate for your machine model.

  You can look in an update of the BIOS from HP, but honestly, I don't know if this will have an effect on the question of whether or not the HP recovery disks will work.

  Best regards

  Matthew_Ha

• "Configuration of the Windows updates failed. Restoration of the changes. Error in don't turn off your computer. "

  My computer is donloading all updates recommended by Microsoft Windows, but do not set up correctly and that their withdrawal all the time. The problem started on 11/13/2013. I not did something to my computer that can change the setting of my computer either. I'd highly appreciate your advice on what I need to do to take my computer back to the State it was before. I also tried the system restore but failed to solve the problem

  A few suggestions here:

  http://support.Microsoft.com/kb/949358/en-AU

• Error: ' Service Pack has not been installed. Restoration of the changes. Not turn off not computer. "unable to install Windows Service Pack 2."

  Original title: cannot install Windows Service Pack 2.

  I tried to install Windows Service Pack 2 and you know how when you lock your laptop, it's how he like to appear. Service pack filed to install, so now have him, he said, 'Service Pack was not installed. Restoration of the changes. Do not turn off computer. "I'm not going to let me at all to connect to my computer... Alls for this is restarts by itself and when it turns on, it says the same thing. I already tried to remove the battery and leaving out the laptop for a little while and then when I put the battery in and re - turn on the laptop, it says the same thing and continues to do exactly the same thing and I'm getting really aggravated and crazy. Is there anyway that I can fix it without going through a computer technician?

  Hello

  Have you been able to successfully install the other updates?

  If you have the Windows Vista installation disc, follow this link and check if the problem persists:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  See: How to troubleshoot Windows Vista and Windows Server 2008 service pack installation problems?

  Learn how to install Windows Vista Service Pack 2

  Hope the helps of information.

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Pavilion 17-g113dx: Can can't Do Factory Restore on the new Windows computer 10 17-g113dx

  I'm doing f factory restore on my new computer with Windows 10 installed at the factory.

  When I go to Recovery Manager, choose the HP recovery environment, there is no option for the restoration of the factory.  When I select the use a unit option, I chose DVD (because I made the recovery discs), I get a message that the "selected boot device has failed.  I tried to boot the computer using F8 or F11 and who does not work either.

  I'm ready to pull my hair, does anyone have the answer?

  Thanks in advance for the help and suggestions.

  slave2mybirds wrote:
  

  When I go to Recovery Manager, choose the HP recovery environment, there is no option for the restoration of the factory.  When I select the use a unit option, I chose DVD (because I made the recovery discs), I get a message that the "selected boot device has failed.  I tried to boot the computer using F8 or F11 and who does not work either.

  Hello

  Thanks for posting in the Forum from HP Support.

  Here are the official instructions for the restoration > > http://support.hp.com/us-en/document/c04758961

  Double please, check, there should be an option, it can be called a bit different.

  If you still do not see it, please take a screenshot of windows screen/photo and attach it to your next post > > http://www.take-a-screenshot.org

• Pavilion all-in-one Q214 23: factory restore on the new HP Pavilion all in one computer

  I have a week 6 old Pavilion Desktop all-in-one.  I wanted to do a factory install on it because I had a lot of extra things that I don't want anymore, I installed and I thought what a factory restore would be better.  I went to the HP Recovery Manager and no where in the choices he said 'factory restore '.  He used to have this option in the HP recovery environment.  I checked all the options and nothing on the factory restore.  I made a set of recovery discs, but I always remember that HP still had the opportunity to do a factory restore.  I have tried F11 and F8 and no luck.

  Answers or suggestions will be greatly appreciated.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  According to the model of the computer, it can not be called exactly the HP system recovery but if your computer is originally shipped with Windows preinstalled 10, recovery partition must be present.

  S ' Please, first manually copy your imporant most of the data on an external partition

  -Follow these instructions here to open the collection from inside Windows

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html#option2

  'S called it Reset - Windows Reset with options to RESET the machine as long as the plant (remove all), with an option to "freshen up" Windows and keep personal files.

  Let me know how it goes and if it works for you.

• Message Windows to restore in the minimized state bar panel.

  Are there messages that appear when a window is restored from the State, other than the 'Got Focus' message (for the recall of the main table)? I need to know when a group of experts has been restored to the State of minized (the user has clicked the button on the taskbar) and is used again. Other than the flag that set if a child window has a separate task bar button, it seems no signals or functions in that regard at all.

  It is currently not possible. However, this proposal has already been posted hereand you can add your own voice, in order to increase the probability that it gets implemented.

  Luis