Computer not start windows

Similar Questions

• My Dell Precision 370 computer not start Windows XP, due to A MISSING or CORRUPT FILE.

  The file that is missing, is a Windows root folder called > System32\hal.dll

  Since this computer Dell was bought for our children used to use, I don't have any Windows XP disk to install the missing file of root or reinstall Windows XP software.

  So, how can I get this missing windows xp root file, in order to exploit the windows xp software?

  I tried to re - start the dell computer, but nothing works!

  If someone could help me, I would appreciate it a lot.

  Is is extremely unlikely that the hal.dll file is really missing or damaged.

  It is extremely likely that XP can't find it either because the file system is afflicted or XP is told to find the file in the right place.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  If the system works, what do you think might have changed since the last time it did not work properly?

  We should first check the inetegiry of your file system and then see what then to do.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• My office is behaving strangely, slow, sometimes does not start Windows.

  * Original title: strange

  OK, so I have a desktop with Windows 7 installed above as my users families. My family tends to put viruses or other forms of malware on the desktop as they constantly plugging their friends drive etc. Last week my office just behaved strangely, running slow, sometimes not start Windows and even run checkdisk on each reboot. I have however to discover the reason for all these questions, because it turns out having a Trojan horse installed on the desktop computer that allows a hacker to access my PC remotely. AVG detects whenever I had scanned my office but unfortunately the Trojan horse is just renamed and removed to another place when detected. Last week I did a new install of Windows 7 and everything worked fine until yesterday. I noticed that AVG was not updated yesterday. I first tried to install what AVG but was unable even to reinstall AVG.  I didn't realize that once I have turn off the Windows Firewall I can install and update AVG without a problem. However the firewall Windows has not prevented never AVG update or install in the past. I thought it was a form of malware, the origin of this problem, but after the start of the HBCD and scan with malwarebytes and also to scan using Kaspersky rescue disk. I have not found a malicious software. Even my windows laptop 8 I have no problems updating and installing AVG, while Windows Firewall is enabled. I really believe that it's some form of malware with managed to bypass all virus scans. Please give me some advice and let me know what is the problem and the solution. Thanks in advance

  It has been long since I had no faith on average. :-)

  Use the removal of AVG on this link tool to completely remove AVG, following the installation of Microsoft Security Essentials here ...

  In addition, pull it out of Windows 8 and leave Windows Defender to take over. You will have less problems you get with AVG. There is no need to install MSE in Windows 8, as it's already there...

• Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

  Hi Sir,

  Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

  Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

  Please give me guide to solve this problem.

  I thank & regards

  Ramanantsoa D

  Thanks for the reply.

  My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

  Although I have not tried switching/EAP, I will try that and get back to you.

  And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

  Thank you.

• HP G71 340 Notebook computer: computer HP G71 Notebook not start Windows 7 installation disc application

  Suddenly I became / / / as this in the search window, tried to run Norton, it seems stuck so I turned it off and then tried to restart, it sound strange signal, beep... beep, that I never heard before after repeated tests went up in the verification of memory message, and it is went well and seemed very well, but still cannot start it somehow a message

  that the battery is low must be changed, instruction followed by HP from another computer to drain and reconnect, but contine to pass the message that Windows could not starte, assistance program have been changed, you have to insert the Windows Setup disc, which I apparently do not have with me at present, probably misplaced, that the computer was purchased 10 + a few years ago.

  What I do, and how do I retrieve my documents, even if it is fixed. Appreciate any advice! Not very computer savy at 79.

  The question has been cleared up by itself, as the liquid I used to clean the filling of kay should have passed and created the problem of dysfunction. I brought to Staples and paid from the outset for diagnostic work, fortunately they coulnd't you not in my computer because they have misplaced my password. I remember the next morning incident, and of course the computer went back to normal when he trided. To speak with the Manager, I received my full refund. It works very well. So be aware of the effect of liquid in your computer! Thanks for trying to help though and will keep the information in case I need it in the future how to get the disc to start my computer.

• Computer does not start Windows 7. .

  Did you update to service pak 1 to restart received a message that your computer could not start, Startup Repair checks your computer if problems are found in the Startup Repair tool will fix their. Startup Repair next message was not able to repair your computer and is blocking drop. When I restart I get the same thing every time. Ready to pull my hair roughly what I have. Any help would be great.

  Hello

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/installwindows7sp1

  Information about Service Pack 1 for Windows 7 and Windows Server 2008 R2
  (How to get and support options)
  http://support.Microsoft.com/kb/976932

  Service Pack Center
  http://Windows.Microsoft.com/windows7sp1

  If necessary:

  How to uninstall Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1

  =====================================================================

  Use the direct link to download SP1.

  Another solution is to download the SP1 and burn the ISO to a disk and then install it.
  In fact, this method is known to solve some problems, such as the USB bug, that can
  assign systems when applied through Windows Update.

  Steps to take before installing Windows 7 Service Pack 1 from Microsoft
  Download Center
  http://support.Microsoft.com/kb/2505743

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=C3202CE6-4056-4059-8A1B-3A9B77CDFDDA

  Documentation for Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=61924cea-83fe-46E9-96d8-027ae59ddc11&displaylang=en

  Problems to install a service pack for Windows 7
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)http://windows.microsoft.com/installwindows7sp1

  Information about Service Pack 1 for Windows 7 and Windows Server 2008 R2
  (How to get and support options)
  http://support.Microsoft.com/kb/976932

  Service Pack Center
  http://Windows.Microsoft.com/windows7sp1

  --------------------------------------------------------------------------------------------------------------------

  Visit this link for more information of MVP Andre Da Costa.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Service-Pack-1-for-Windows-7/394c4fa3-2d62-E011-8dfc-68b599b31bf5

  I hope this helps.

• Satellite L300D-11 a - do not start Windows vista

  Hello

  When I turn on my computer, I get the following error message:

  Error recovery for Windows

  Windows cannot start up. A change of equipment or software that has been recently achieved may be the cause.

  If the windows files are damaged or misconfigured, you can start the repair tool to help you diagnose and fix the problem. If the power was interrupted during startup, choose start windows normally.

  Start the (recommended) Startup Repair tool
  Start windows normally.
  After a while windows automatically selects the first option and try to load windows in recovery mode, but then, I get the following error:

  "The installed software could not start. Click ok to shut down the computer.

  When it stops and I start the computer again, I get the same error message when I started with the 2 options of recovery mode or start windows normally.
  When I select 2. option (start windows normally), it loads windows and after some time restarts and then I get the same error with two options.

  I tried to boot from the CD (recovery disk, vista bootable cd) and computer attempts a while but then he gave up and start again starting from the HARD disk. (I changed to boot from the CD first in the BIOS).

  Anyone know how to fix this?

  I have laptop Toshiba model nr: L300D-11

  Hello

  If I understand your message, you tried to boot from recovery and MS Vista CD disc and no recovery disk worked not the Vista CD.

  Is this good?

  Hmm that's very strange... Perhaps you could remove the laptop HARD drive and could put it into a USB external HDD enclosure.
  Then you could format the HARD drive using another computer.
  After that, you could try to reinstall new OS

  Please also enter the BIOS and set it to the default settings the compatible SATA mode value and try to boot from the Vista CD again

  Good luck

• Satellite L500 will not start - Windows issue?

  My nephew is the owner of this laptop 1 year old and asked me for help yesterday.
  There's an eggtimer permanent on the mouse cursor and clicking on trackpad or any key does nothing.

  I ctrl, alt, del to open, and then select the Task Manager, but then the thing freezes. place then the only solution.
  I could not access my computer or start / programs, etc. by clicking on anything does nothing.

  I started in safe mode with network and updated & ran several programs - super antispyware, spybot, ccleaner & anti malwarebytes. the latter find stuff but unimportant or whatever it is was reported by none.

  It has none of the recovery disks because none was provided. He never made the recovery discs as advised when it is new, so I tried to make a series of discs, but it was impossible to read some files and I had to abort the operation.
  I have downloaded and run mechanic system but this found no real problems.

  When I try to open my computer, the answer is a long time to come and opens a page of help windows in m/s only. He advises the system restore but there ar no restore points available.

  When I tried to launch avg he behaved "very odd" to say the least. I uninstalled that too.

  I uninstalled several toolbars and games stuff that my nephew had but for all my efforts, above the situation remains the same. I'm trying to do a windows repair disk and will try that to see if it helps.

  I put the disc and restarted with poor results. He asked me to reinstall windows, and I agreed. I then, a long time later had a message saying that the computer has an error unexpectedly., restart to complete the installation.
  When I click ok to restart, the message is repeated. I retried several times - same result.

  I tried turning on off and powered by pressing f1 through f12 in turn. no difference.
  I think I need a new disk (64) of windows 7 or a recovery dvd set of toshiba.

  Any thoughts on recovering from a bad situation would be welcome.

  > I think I need a new disk (64) of windows 7 or a recovery dvd set of toshiba.
  > Any thoughts on recovering from a bad situation would be welcome.

  Yes, I agree with you at this stage that I would also try to reinstall a new Windows system or Toshiba Recovery disk image
  Usually the new OS install helps determine what s wrong here, from my point of view, it looks like the BONE was confusing to and installation of the operating system might solve this problem.

  But as you know, it's just a theory. I think that if would not help you with new installation OS (recovery), the next should be a RAM and HARD drive test

  What do you think?

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• I have windows xp professional operating system at boot it stops with error disk failure (40) and will not start windows can help u

  If I press f1 it will then boot to windows, but I need to cure the problem with the disk error message

  Hello petertomblin,

  It seems that this message is coming because of settings in the BIOS.

  The computer has a floppy drive?

  If so, is it operational?

  Nevertheless, we want to get into the BIOS and disable the startup procedure floppy drive,

  It is this best with support of the manufacturer of your.

  PLEASE NOTE:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Best regards

  Matthew_Ha

• MY TOP of DELL Dimension 1100/B110 DESKTOP will not start windows black screen of death.

  I had my computer when there was a power failure in a storm, it was on a surge protector but the next day I turned on the computer, it was clicking on and then he gave me a black screen with the time system and configuration system date drive and other different things, but no screen with safe MODE or something like that. and I have no enternet, here where I live. Help me please.

  MY DELL DESK TOP Dimension 1100/B110 STARTS at THE BEGINNING, GOES THROUGH THE MAIL. SO NOT ME NOT LEFT IN THE SAFE MODE SCREEN, IF I PRESS F8, IT GOES TO ANOTHER SCREEN WHICH ME SAYS THAT MY HARD DRIVE CANNOT BE FOUND. IF YOU GO TO ANYTHING ON THIS PAGE IT TELLS YOU THE "PRIMARY MASTER" PLAYER IS... HARD DRIVE. AND THE MAIN SLAVE DRIVE IS... OFFAND STUFF LIKE THAT BUT NO SAFE MODE OR ANYTHING. MY SCREEN IS A BLACK SCREEN. AND WHEN I START THE COMPUTER THERE AS A TRIGGER FOR A BIT BEFORE I GET THE SCREEN I GET. WHAT SHOULD I DO?

  Hello

  · You have the Windows XP Setup disk?

  You can follow the steps in the below links which will help you solve the problem.

  Link: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer: http://support.microsoft.com/kb/321626

  Computer stops responding with a black screen when you start Windows XP: http://support.microsoft.com/kb/314503

  If you do not have the disk to the operating system, then you may need to contact the manufacturer of the computer. Link: http://support.dell.com/support/index.aspx?c=us&l=en&s=gen& ~ ck = mn

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite P300-28th does not start - windows does not load

  I bought Toshiba P300 28th last week. I spent Vista business successfully in Windows XP Professional with provided Toshiba DVD. Update Windows with Windows Update. After 3 days, laptop turns off suddenly, and because Windows does not start, it in fact does not start.

  When I press the power button / stop, it turns on, shows "Toshiba Leading Innovation" logo image option and "2", "press 12...", and it hangs and stops.
  I tried pressing F2 and F12, nothing happened.

  I can not access the boot menu.

  I put the Toshiba Recovery CD, the hard drive does not work. Recovery disk does not start, despite earlier I remember put boot CD/DVD at the forefront in the Boot Options to Boot Menu.

  I checked everything, power cable, took the battery in and replace after 3 hours, tried to turn on the portable power, without battery cable. Did not help.

  Don't know what to do?

  Your help is very appreciated.

  Hello Fiona

  If you are unable to enter the BIOS (F2) at startup settings there must be some serious hardware problem.
  I recommend to contact your local dealer where you bought this laptop and ask for help, or you can contact Toshiba service provider directly.

  What you have tried to do is good but if laptop doesn t allow you to enter parameters of the BIOS something wrong here, and you need professional help.

• Satellite A100-232 does not start windows, but is stuck

  Hello

  I am having a serious problem with my old laptop (Toshiba Satellite A100).
  When I turn on the pc, it does not start the Windows but is stuck.
  If I press F2 to open the Bios, it seems not work while the works of F12 (select boot device), but it is impossible to start anything.

  I tried the following:

  1 removed, cleaned and replaced the RAM
  2. HARD drive removed and reconnected.
  3. check the HARD drive if it is damaged, but it is not.
  4A tried to boot from the Windows XP cd and install it but it crashes
  5A tried to boot from the cd with Linux, but it does not work.
  6. has created a Windows 98 flash drive to start, but it does not work.
  7 tried to clear CMOS by removing the battery, but I couldn't because he is stuck on MB.

  I visited a technisian but he couldn't fix it.
  He told me that the BIOS is corrupted or crashed. Maybe I should replace somehow.

  Is this possible?
  How?

  Thank you

  It is for the Satellite A105 (PSAA2U) Bios Update, you can test the file at your own risk.

  A text readme file is located in the folder, follow the instructions.
  Download the Bios file from the link and copy it to a USB key, go into you Bios and this flash file.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2188938&PF=true

• When I install memory in my hp pavilion dm4-1160us why can't not start Windows?

  Current running Windows 7 Home Premium, 64 bit, Version 6.1.7601 Service Pack 1 Build 7601

  HP Pavilion dm4-1160us XH124UA PN #ABA

  Processor Intel (r) Core i5 CPU M 450 @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors

  BIOS Version/Date Hewlett-Packard F.27, 21/12/2011

  Installed 2 4 GB DDR3 10600, 1333 MHz SODIMM

  Windows does not start. I tried using 1 stick at a time to see if it was bad, still does not start. I reinstalled the 2 sticks of 2 GB and it started off very well.

  Some DDR3-1333 is low voltage 1.35 volts and you need 1.5 volt memory. Also look at configuring physical chips existing fo... black blocks on one side or both sides? 2 rows of blocks or one? Try to match as closely as possible.