Computer suddenly does not recognize the mouse.

Similar Questions

• Qosmio G does not recognize the mouse using two left USB ports

  I'm right handed so I naturally put my optical mouse Saitec in the port of the right hand.

  The other day I plugged it in the ports of the two left hand and the machine did not recognize the mouse.
  He went through the process of installing the drivers (even if it was done a few weeks ago, when I plugged in the port of the right hand)

  In any case the mouse doesn't at all plugged into ports on the left side.

  Does anyone have any ideas as to why what is happening?
  Look of Sean.

  Hello

  Have you tested the two left with other USB devices USB ports. That is to say USB flash stick?
  Maybe you should do this to see if it could be a defective USP port.

  But I recommend to test this;
  First disconnect all USB devices
  Then go into the Device Manager and all the USB host controller and hubs USB remove from the list of devices.
  Close all windows and restart the laptop.

  Finally the operating system should recognize the new devices (USB ports) again.
  Connect a USB device to one of the ports on the left and check if it would work.

  Good bye

  PS: What Qosmio do you have?

• I just installed a 2nd ATA drive, now the computer (SR2150NX) does not recognize the CD drive.

  Computer Compaq SR2150NX Vista Home. Device Manager does not display the CD/DVD drive after installing a hard drive from second on the tablecloth that is also connected to the CD player. The new drive is seen fine. If I pull the power of the new drive and restart, the drive is visible again. The disc was a secondary drive in another computer, so it is set to be a slave. How can I get both work?

  It is perhaps as simple as changing the jumper on CS (Cable Select).

• pilot (4thGen) Apple i-touch for xpsp3 (computer Dell does not recognize the ipod/itouch)

  Hey group,

  I just bought an i-Touch used on Ebay.  I have two computers: Dell 8300 and Toshiba Satellite.  Both run Win. XP SP3 (Build 2600 - Version 5.1.2600.5512) here's the twist: the laptop recognizes it is not the case of the desktop computer.  Suggestions for Apple do not seem to help me.  I downloaded the latest versions of i-Tunes for both systems.   Obviously, there must be a missing driver from Dell.  Help me Obi Wan.

  Hello

  Try the steps listed in the links below and check, if it helps:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  iPod not recognized in 'My computer' and in iTunes for Windows: http://support.apple.com/kb/ts1369

• installation screen does not recognize the mouse/keyboard

  Hello
  Passage of the Pro x 86 to x 64. I do not have a disk original as a burnt image, which seems to me to be recent. I got the link for him to store chat session windows today. Keyboard and wireless mouse work fine in the bios. When it is at the first Setup screen (where it asks for the language, country, etc) there is no cursor or keyboard response, so I can't start the installation. I have ONLY usb 3.0 on this build. X 86 installed fine. Any recommendations? I tried to unplug all other usb devices and tried UN / reconnect the bluetooth receiver. Nothing seems to help.

  Another couple of things you can try is:

  (1) check your BIOS for USB, mouse, wirelesss options settings.

  (2) move the transmitter to a different USB port USB wireless until you find one that works.

  (I suggest this because 2 of my ports were dead until I could insstall Windows, then the pilot, but worked at least 2 other ports).

  J W Stuart: http://www.pagestart.com

• using bitlocker to encrypt the hard drive but the computer now does not recognize the hard drive.

  I use a computer, provided by the company, with the OS Windows 7 Enterprise.

  Is connected a drive 2.5 inch 500G external hard, of WD.

  Using BitLocker to lock the hard drive and with a document of the company. And, later, you unlock the hard drive with the same computer. Status ok. However, I connect the HD to any other device, but no HD were found. Then I plug the HD again with my computer, the BitLock software are not really able to the HD has recognized and sometimes rapidly upward and ask for the key to recovery.

  I tried to use the key (txt file), but still no success.

  I called the hotline of Microsoft and was re-directed I post my question here.

  Appreciated if anyone in this community can help...

  My computer is LEnovo X 201.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/w7itproperf/threads

• HP 15-f024wm laptop computer: laptop does not recognize the SD card into the usb port

  I don't have a sd card reader on my laptop but have used a map on her usb adapter and it worked. I had to make a full recovery, update and reload the browser and so on. HP has spent hours helping me to get back to his normal race car computer... but this issue remains and can't find what I need to do the usb - SD card reader. Yes, the usb port works as I use it for other things.  Don't know what I'm missing.

  Hello

  Your machine IS not card reader. His record:

  http://support.HP.com/au-en/document/c04420347

  which indicates:

  External ports:

  • Multi format digital card reader for Secure Digital cards
  • 2 superSpeed USB 3.0
  • 1 bus (USB) 2.0 universal series
  • 1 HDMI
  • 1 PORT RJ-45 (LAN)
  • 1 plug headphone-out/microphone-in the drop-down list

  Location:

  

  Everything you need: download Driver Realtek card reader and install it on your computer.

  http://ftp.HP.com/pub/SoftPaq/sp66501-67000/sp66959.exe

  For your question: all the USB ports work?

  Kind regards.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Pavilion HPE h8 1103nl does not recognize the keyboard & mouse

  After 10 days of installation, copy and all that kind of stuff that comes with a new PC, everything worked, and finally, I put everything in place, put the wires out of sight and all. Of course, I had to sign a few things, and somewhere in the process of electricity is out. Well, the PC was off anyway (at least I thought it was. I also changed the USB port to which the keyboard and mouse were attached. When I turned on the computer, I had a "keyboard" error, could not start (because electricity had come off the coast), but as the PC does not recognize the keyboard or the mouse, I was unable to give a or something.

  Keyboard and wireless mouse tried again, also under the old, but that didn't work.  Tried to reconnect, but in vain.

  Now what can I do?

  Hi HardBeatZ

  Thans for your answer!

  I found the solution, after trying and try... but could not find my ad more (duhhh), so thanks for the answer!

  Apparently I did ' t hold the button "connect" quite a long time to make a new connection... :-(

  Everything works fine now... Thanks again!

  Mijni

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Cannot map 323 D-link; my computer does not recognize the Volume_1 of D-Link

  I'm not able to map my D-Link 323; my computer recognizes the D-Link, but does not recognize the Volume_1 of D-Link.  I would be grateful if someone has an idea how to solve the problem.

  Sincere thanks, Bob

  Hello

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  See the following site:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-shortcut-to-map-a-network-drive

  For more assistance, contact the manufacturer.

• Computer does not recognize the disc in the cd drive.

  original title: media player 11 does not recognize the disc in the cd drive.

  Media Player 11

  I use Windows XP oper. system, my windows player works fine execpt when I place a cd in the drawer of rip to rip to my library WMP does not recognize that there is a disc in the drawer of thr. The problem started after I installed a vinal record of pc system, but he has always recognized that the disc was in rip drawer, if I put the disc in the drawer and WMP has closed and reopened. then it started to not recognize that a disk was in the drawer, even if I closed and reopened WMP with the disc in the drawer. Any solution to this problem would be greatly appericated. Thanks George

  Hello

  Remove the filter upper and lower filter and see if it helps.

  r: clickStartand then click run

  b:   In theOpen box, type regedit, and then click OK

  c:   In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d: in the right pane, clickUpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. ClickUpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step g.

  e: in theEdit menu, click delete.

  f: when you are prompted to confirm the removal, clickYes

  g:    In the right pane, clickLowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section"next steps"to learn how you can find more solutions or more help on the Microsoft Web site.

  h: in theEdit menu, click delete.

  i: when you are prompted to confirm the removal, clickYes

  j:    Exit Registry Editor.

  KC: restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• Computer laptop does not recognize not the charger.

  Original title: charger delivers

  My computer continues to give the message that it does not recognize the charger of my computer and is told to use a Dell charger - I use the Dell charger supplied with the computer.

  Is this a connection problem or is the battery discharged?

  Hello

  Thanks for posting! If I understand correctly, you are facing problems with the loading of the computer. Correct me if I'm wrong!

  Before I continue, I would like to collect some personal information.

  1. have there been recent changes to the system before the show?

  2. What is the brand and model of the computer?

  Method:

  Follow the link and run the fix it convenience store. Check if it helps.

  The problems of power consumption and extend laptop battery life

  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Reference: http://support.dell.com/support/topics/global.aspx/support/kcs/document?docid=51941

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266440

  If the problem persists, I suggest you to contact the manufacturer.

  http://support.Dell.com/

  Answer us with the results. I'd be happy to help you further.