computer Toshiba laptop will not load MemoryStick

Similar Questions

• Computer Toshiba laptop will not collect CD/DVD player

  Toshiba Satellite L305D-S5897. All of a sudden my laptop had some problems to stay connected with my CD/DVD drive. Its a Matshita dvd ram uj 850 s. sometimes, he disappears on the no hand, unexpected. I played a game yesterday and the game comes close to the top on its own, not even an error note or anything like that - it lacked the drive. I already tried Microsoft fix - it program and it usually solves the problem, but after a few minutes or something, his party once again. And then the register, there was only a higher filter, not a lower filter, and I deleted it. I restarted my computer, and I saw the disc written twice in my computer, then they both disappeared. And finally, I deleted iTunes because of what I read about it affecting the status of the drive. Helped for maybe an hour or two, then he disappeared. Are there other ways to solve this problem? I hope this is enough information.

  Hello

  iTunes and others, especially when there are several, CD/DVD programs will compete
  for resources that can lead to strange problems with readers. You have more than a couple
  other than the features included in Windows?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ===============================================================

  If necessary:

  Check with Toshiba support, their drivers online (update or reinstall) and their known forums
  problems and possible solutions.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP F023WM: My HP laptop will not load after, log.

  My HP laptop will not load after login

  Lights well, once I connect it just shows a black screen with cursor.

  Help, please

  Hello

  Try the following.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Click on file and select the new task.

  Type rstrui - also enter a tick in the box for "create this task with administrative privileges" - and click on Ok.

  When the system restore interface is loaded, choose a restore point at least 48 hours before the log - it occurs first and then proceed to the system restore.

  If the above is not correct the problem, try to run the steps in the link below.

  http://h30434.www3.HP.com/T5/notebook-display-and-video/fix-black-screen-displays-after-logging-in-t...

  Kind regards

  DP - K

• my new laptop will not load or run AOL, the laptop is runing windows 7

  I tried to install AOL on my new laptop computer but it does not load or open when he finished istalling, the laptop is windows 7, can help explain why it is happeniong please

  I tried to install AOL on my new laptop computer but it does not load or open when he finished istalling, the laptop is windows 7, can help explain why it is happeniong please

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  They are specialists in IE it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer Toshiba laptop does not work after the lid slam... Help please!

  This problem with a Toshiba - windows vista laptop began after the cover was closed too hard. When he was conducting swiched, instead of going to the usual blue screen, the screen was grey and a message would come in saying ' it installed program cannot start. " Click ok to stop the computer", as I could not get into windows at all, I took the drastic step to insert the recovery disks that came with the laptop to launch new and see if it worked (a cell phone factory default is is better than nothing).

  In any case during the process, which took a very long time, I got messages such as not found HDD1 also say there not enough space to recover.  Then I got x:\windows\systems32 and nothing else it got stuck on that for centuries, because he just asked me to check the disk, but I couldn't because I couldn't get a windows session, I looked online and saw something similar to my prob and says type chkdsk c:/f I did after recovering past for much longer afterwards I had to stop at 80% , because there is no room in the end and now I don't even not the blue screen.

  As soon as the laptop is turned on, it says, could not start windows. A recent hardware or software change might be the cause to fix the prob insert your windows installation disc.  But it won't let me, I get just the same message and also it says File\Windows\system32\drivers\Wdf01000.sys and the State: Oc00000e9 and Info: Windows could not load a critical system driver is missing or damaged.

  Please help me if you can, my daughter really needs the laptop works again for homework, thanks a lot

  Thank you for taking the time to answer, I think that will be my next move, was hoping I wouldn't have to take to a repair shop, because you never know how it will end up costing, there may be more damage than all formatting, thanks once again :)

• Satellite L300 laptop will not load Windows

  I have a model of Satellite L300 number PSLB0A - 00L 022 running windows Vista.

  The problem is that it does not load Windows. It starts ok and I can access the boot manager and the Setup utility and that's it. It stops just loading.
  After studying the problem, I ran a car aptitude test and the result was the error code 0 x 70. After looking at the code I m under the impression that I need to erase the disc. I have no problem with that.

  My question is - if I run the windows Recovery Wizard will be it solve my problem? I will have to re install vista at all? All advice is appreciated!

  Hello Jane and welcome in the Toshiba forum

  After reading your ad, I must say that the best solution and easier for you is to reinstall the operating system via original Toshiba recovery DVD. This DVD contains the operating system, all necessary drivers, specific Toshiba and utility tools. After recovery image installation you will get state out-of-box and clean the preinstalled operating system.

  Yes, this should solve your problem. Please note: when you do it all saved data will be deleted.

  You have some important data saved on your laptop?
  Do not use this disc reinstall Vista and everything should be ok again.

• Computer Toshiba laptop does not start after trying to install SP2 for vista 32 bit

  Tried to install SP2 for vista updates, it stagnates at 12%, message saying a problem has been detected and windows has been closed to protect the computer. At the bottom of the error message screen, it reads, technical info-stop OXOOOOC1F5. Windows doesn't start at all now, has tried running safe mode, pilots seem to load, then it returns to the screen error message with the same problem said. Nothing seems to work, tried same recovery disk came with the computer, it says it is loading files, then it returns also to error message screen. Computer came with vista pre-installed, so I don't have this drive to try. Someone at - it solutions? Very frustrating, how do I search problem when the computer will not start at all? Help!

  Follow the info below to try a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  If yours falls into the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.
  You can do a system restart tool, system, etc it restore.
  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  Mick Murphy - Microsoft partner

• My toshiba laptop will not connect to my HP Envy 4500 printer

  Recently, I tried to connect my Toshiba laptop running Windows 8, wireless on my HP Envy 4500 printer. I am trying to scan something on my laptop, I did with the printer before. I have the remote app, and I have connected to the network the printer wireless displays in the wifi of my computer. However, when you try to get the printer to scan, using the option on the printer screen, it says that no device is connected, and to ensure that the software has been installed and this scan to pc has been activated. I opened the application on my laptop, in hopes of getting better results using what it was, but he told me that the printer is offline, if it was obviously on. I'm not entirely sure why the printer doesn't recognize my laptop, even if my laptop recognizes. I spent nearly two hours, disconnection and reconnection, as well as the printer off about three times. I'm about to uninstall the application and try to reinstall, but I'm questioning that results will be better.

  I don't see any other way to solve this problem, because there is no USB port to connect a USB cable don't, like myprevious printer and wonder if it is my laptop, not the printer, which is faulty. It works for printing, when it comes to other devices in my house, but I had problems same impression with my Toshiba before. I tried only with another scanning device: a desktop HP Pavilion Media Center TV PC computer. I'm starting to think that the scanner is broken to only other reognizing products HP and ask any advice to fix this problem.

  Hi AMakkei,

  Welcome to the HP Forums!

  I understand that you can't scan with your Envy HP 4500 to your laptop Windows 8, and I'm happy to help you with this problem of connection!

  To get help, I'll need to know the following information:

  • If the printer is capable of making copies of itself.
  • If the power cable plugged into a surge protector, or directly on a wall plug. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  In the meantime, please try go through this guide. A computer"not found" or a Message appears "connection error" during the scanningand let me know what happens!

  I hope to hear from you and have a nice day!

• Laptop will not load Explorer - is there a way to download Firefox without using Explorer? Restore the all too recent dates!

  I think that affected versions of Windows Explorer (we have a card in the laptop, which I believe is the origin of the problem) so that it is more load. I would like to switch to Firefox, but do not know how to load it without exploring. My Google Earth goes to internet and my e-mail program (Mozilla Thunderbird) still work so the wireless connection still works, but Explorer does not work. Can anyone help? 'Restore' my dates are all too recent. I restored once reworked Explorer, but Windows downloaded their upgrades again and now does not load Explorer. The oldest date of 'restoration' is too recent. I type this request for help on another computer.

  You can use another computer (such as your local library) to download firefox to go and put it on a USB key.

  • https://www.Mozilla.org/en-us/Firefox/all/

• Re: My Satellite laptop will not load to the top

  Hello

  My laptop isn't even a year yet, it worked fine until today.
  I turn it on and the bit of Toshiba comes up then after that it of just a black screen and then it says

  Realtek rtl810ie/8102e pci-e ethernet controller v1.07 (080320)
  PXE - e61 media test failure, check cable of
  PXE - mof exiting pxe rom.
  no boot device - insert boot disk and press any key

  I put t have a startup disk or anything! Fact does not matter what it means?

  Thanks for any help

  Layla

  Each book has specific boot order and in this boot order components of different material as drive optical drive, hard drive, or LAN.

  The start is always set in the BIOS settings and nothing, for instance HARD, LAN and ODD disk boot order. If the laptop can not boot from HDD ist starts from second defined device (LAN) and continue.

  Boot order of your laptop satellite does not for me, but somehow, it stays on the startup of the LAN device option and you can see this message on the screen.

  Restart your laptop, and press F2 to enter the BIOS settings. The default value and try again. If the same start arriving portable once again but this time with the F12 for boot options-enter key. With top and bottom arrows have chosen press and device disk HARD come. If the HARD disk is OK, OS should load up. If this is not the case, there is a problem with the operating system preinstalled.

  Please test and send feedback.

• Laptop will not load

  I don't know much about computers so it's perhaps confused lol. When I turn on my laptop I don't get a picture and it does not load. The ACL come on the screen and keyboard but nothing else. I can up the menu of the bios using the f10 key. But I can't get anything to offer for the f8 key. I have no money to have technical support to repair, so I'll try to figure it out myself. Someone please help...

  Well I guess I will buy a new cell phone lol. Thanks for the help

• Laptop will not load after installation of SP1. "!! Oxc01a001d! 28497/89893 (\Registry\Machine\COMPONENTS\DerivedData...) "is displayed after the start!

  I have a Toshiba Satellite. Running Windows Vista Home premium 32 bit.
  It was working fine until I tried to intsal Service Pack 1 through Windows install after having been invited by windows that he criticized the update.

  Now windows won't start. I tried the Safe mode, but it stop at the "Loaded: \windows\system32\drivers\crcdisk.sys ' telling me to wait, but it does nothing.

  I tried to start another option but they all end in error. Oxc01a001d! 28497/89893 (Registry\Machine\COMPONENTS\DerivedData...) »

  Someone please HELP!

  I was able to fix the problem by reinstalling windows using the Installation DVD of Vista. He did a "fresh" Reinstall. To do this you first have to set the BIOS to boot from the CD drive instead of the hard drive.
   
  Instructions to do so can be found here: http://techpaul.wordpress.com/2007/08/03/how-to-boot-from-a-cd/

  Insert your Vista DVD and choose repair or install. My Vista files have been basically corrupt but not your strength. If they are not to select Repair will give you the opportunity to do a system restore.

  Don't forget to reinstall Vista to wipe your hard drive and you will lose your files. System Restore will not. But if you supported rose them to an external drive or online so no problem!

  I hope this helps!

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

• Computer Toshiba laptop does not start

  Have had some problems malware. Thought I had deleted them, including Thinkpoint. Restarted. Got the original F2 and F12 screen then just empty. Will not go further.

  Can anyone help please.

  Hi jagman49,

  1. try to start the computer in safe mode and check if you are able to boot to the desktop.

  See the link below to start in safe mode: a description of the options to start in Windows XP Mode:http://support.microsoft.com/kb/315222

  2, if you are unable to boot into safe mode, then try the steps by Mike - support engineer Microsoft Support, moderator of the link below: http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer hp laptop will not update

  I have a hp DV7 w/win7 got from QVC, I can't update windows I get an error #8007371B code. Microsoft tells me that I have to reinstall win 7, I do not have soft wear with my laptop. I contacted QVC, they told me they have no disc for win 7 and I have to buy a copy of win 7 or the update to win 8. Also my iTunes will not update. No idea what I should do now. Thanks for your help

  We need recovery software in a dedicated hard disk partition. Nobody gets recovery disc more. When the laptop is new it told you to burn recovery discs, but you can probably still recover to factory specifications using the F11 recovery method. Press F11 you power up and see if you get in a recovery environment.