Configuration of the VRM and VR to SRM 5.0

Similar Questions

• VLANS can be configured at the vSwitch and Portgroup level?

  Dear friends,

  I hope that all do you good...

  Two statements are true about groups of ports and VLAN defined on a switch vNetwork Standard? (Choose two)

  A. A VLAN can be configured for the entire virtual switch or on groups of individual ports

  B. several groups of ports can specify the same VLAN

  C. VLAN can only be configured on individual port groups

  D. several VLANS can be specified in a port group

  VLANS can be configured at the vSwitch and Portgroup level?

  B. several groups of ports can specify the same VLAN

  C. VLAN can only be configured on individual port groups

• Problem blackBerry Smartphones with the configuration of the internet and the mail (from France)

  Hey x)

  I just got my Blackberry yesterday (I'm of the France) with Universal Mobile - Bouygues Telecome, package blocked for BlackBerry.

  In this "package", I have SMS/mms, internet and unlimited emails.

  But I can't go to the internet, its does not work and when I'm trying to configure the email option in "advanced option", I don't have any kind of confirmation message.

  I tried the site but I got this error message:

  "Failed to create the account:

  This device BlackBerry (r) is not registered with your wireless service provider.
  Please register for this device and make sure that the URL of the web site current corresponds to
  one provided by your wireless service provider.
  To register:

  1. in the list of applications on your device, click on Options, or click Advanced Options.

  2. click on Advanced Options > host Routing Table.

  3. click on the Menu button, then click on register now.

  If the error persists, contact your wireless service provider. »

  And so, as I said, I've done this manipulation, but I don't have a confirmation when I put "host routing table.

  And in the configuration of the e-mail, I have just the professional thing.

  Can you help me please?

  Hello

  From what you describe, you will have to do exactly what it is say you - contact your service provider. Something is not right with your setup of BIS... and they control it.

  Good luck!

• Configuration of the slots and targeters on cluster scenarios

  Hello!
  
  I build aplications with standalone indicator through the runAssembler tool to run on a cluster. I have a problem with the scenarios, the slots and targeters. In the servers built with standalone indicator, these components do not work. The strategy updating active file is a shared virtual file system where single server updates the file system and all other servers must read, atg, epub, file, ConfigFileSystem tip to this virtual file system shared in all the autonomous production servers, but they can't get the components.
  
  Example: ScenarioManager only lists my scripts even that they exist in the shared file system.
  
  So here is my question, how to configure stand-alone servers to read a single file system common scenarios, the slots and targeters?
  
  Thanks in advance.

  The cluster, you must configure your server in the scenario editor, must be configured one by ATG Server (Server ATG is basically you set to the production server, the value of the server publshing...) One server on server ATG together must be the editor of server, which will be responsible for loading the .sec go ConfigFileSystem and fill the same as tables dss_xref, ProfileAdapterRepository use and ScenarioManager this repository.

  After that, don't forget to set up your master/slave deployment, if your have more than one machine, chose a ConfiFileSystem to be your master on each machine and others must be slave, them, CA deployment agent you configure deploy one master to receive ConfigFileSystem.

• Add a configuration to the library and templates - IP address keeping

  Good morning community which is more useful...

  I have a few virtual machines in the workspace that I need to add to the library and then create templates while keeping the IP address. The people of my app team made install them and will have to spend a lot of time to reconfigure their applications if the IP address must be changed. These virtual machines are enclosed and in a closed network so no problems with conflicts of IP. End users (below people app) then connect via LM as opposed to RDP.

  Thanks in advance for taking a reading.

  Jessie

  You seem to have described exactly what did the library.  You also say you want to have certain VM from the templates become configuration that would have a static IP address, once brought in a workspace configuration?

• Please advice on the Configuration of the network and possibilities.

  Hello

  I have a small office at home (me, my wife and 2 employees) and I need to improve my network. It's simply not up to the task.

  Which must be supported:

  • 5 PC desktop
  • 2 notebooks private
  • 2 network printers
  • XBOX
  • NAS
  • Many mobile devices
  • ADSL internet connection
  • Connection internet optical fiber (glass)
  • System network audio (Sonos)

  Right now I use a combination of routers/switches of different brands, and I want to spend it again all devices, all from a brand. That's what I want to do:

  • A wired router to handle the traffic internet ADSL and fiber
  • Several access points wireless (1 device with multiple SSID) or multiple devices: a client, a desk, one for home, one for...
  • Home network of offices on a separate subnet from the network
  • Router must be able to act as an OpenVPN client and tunnel specific IP addresses / ports LAN from the intranet to the VPN service provider (it of to hide my IP address, mainly for private use, not for torrenting, right to privacy)
  • Currently, there is no need to be able to Dáil from outside the office, this could change in the future

  I was thinking to buy the following:

  • LRT224
  • 2 * LAPAC1750 (since the home + office is large enough)

  I reuse a switch 8 ports business grade, no need to replace it.

  My setup is as follows:

  ADSL Modem (bridge mode)-\ /-LAPAC1750 for office and clients (2 SSID)

  > - LRT224 -

  Fiber connection-/ |       \--LAPAC1750 for House- + - OpenVPN connection

  |                                |

  Switch 8 ports (company) + - direct connection

  After reading the manual for both devices, I think that the wireless access points are more then adequate for the task. However, I have my doubts about the LRT224. Yes, it has dual WAN, so perfect for the routing of traffic ADSL or fiber. But the OpenVPN part is not what I need. I need something that is offered by the tomato/DD-WRT flashes for all-in-one routers: OpenVPN client build-in and able to route specific traffic through the VPN tunnel.

  My question is: is this, I want to install, possible with devices metntioned, including a tunnel (via AirVPN) OpenVPN implementation to route the traffic/specific devices through, and multiple wireless access points.

  I hope some of you can help me here. I won't buy an all-in-one wireless router, since a problem with these devices lies between offten, and I like the look and feel of Linksys devices.

  Thanks in advance.

  With sincere friendships.

  Sjoerd

  Edit: fixed formatting and some typo

  LRT routers don't tunnel VPN vendors like the Open Source router firmwares.

• Configuration of the DMZ and USER-BASE10

  Hello

  I've been using System DMZ1 variables... 3 and USER-ADDRS1... 5 to identify the different networks. However, I was wondering, what is the difference between the DMZ and USER-BASE10? It is in the name, or they are used in different ways by some aspects of the software?

  Kind regards

  Matt

  There is no difference. They are purely just names. The sensorApp just treats them as variables that can be used to specify filters.

• Configuration of the DRS and CVS!

  Hi all

  I have 2 IBM (M4 Systemx3650 IBM, Intel® Xeon® CPU E5 - 2620 V2 2.10 GHz, 12 processors * 2,099 GHz) hosts.

  one DELL number (PowerEdgeR730, Intel® Xeon® CPU E5 - 2630 V3 @ 2.40 GHz, 16 processors * 2,399 GHz) host with much more kit license vmWARE. configured in a single cluster and all ARMY 3 are under the same group.

  Problem 1: attempt to activation of DRS, get error because I'm not allowed to activate DRS for license and DELL host must be updated to the same.

  "Problem 2: attempt to activate CVSIntel® Ivy Bridge ' generation is not tenable for host DELL and Intel®"Haswell"generation is not tenable to accumulated both IBM hosts.

  If someone could suggest an easy way to overcome it / what step should I take to solve it.

  So now the problem is simple, since you do not have a problem of compatibility really :-) Since vCenter VM is started in one of the hosts, you must perform this procedure: VMware KB: VCA allowing on a cluster when vCenter Server is running in a virtual machine

  The VCA level for the new cluster must be Ivy Bridge.

• Configuration of the cards and CPU

  I create a virtual machine, install Linux, then stopping. Using PowerCLI how can I set the CPU to have two cores per socket (either when creating the VM or after stop - or is very well)?

  I also remove the NETWORK card that is used to set up and create two new NETWORK cards. If I do not fill the MAC addresses, will be ESXi automatically generate the MAC address during the first use of the virtual machine?  (The virtual machine will be exported and used on different computers.)

  Thank you

  Take a look on Re: powercli command to add a CPU processor cores?

• How can I get the tab bar to move the bookmarks column to the bass and opening on the far left.

  I have my favorites set as a sidebar fixed. In versions 2.0 and 3.0, when I open the tabs they were starting to the right of the bookmarks bar. Now with v15.0 I see it forcing the bookmark sidebar down and place a tab right above him. I tried the subject: configuration on the tabs and bookmarks settings with no luck. All I want is to have the behavior as if it were in 2.0. In other words, the bookmark sidemark is fixed and the tabs bar starting to the right. I can see where the developers thought it would be wise to extend the bar tab all the way from the far left of the browser on the right-hand page. But I like well confined in a quadrant to set.
  Thank you.

  No, it isn't. This "control" is part of a regular toolbar now. Any element of the toolbar can be out on the tab bar, as with other toolbars.

• HP Officejet Pro 8500 A909a USB 3 questions about the configuration of the network - port USB3 problem

  Fujitsu Windows 7 laptop (all USB2)

  used the full software and installed a printer HP Officejet Pro 8500 A909a Series as a network printer.

  The printer installed fine and don't have USB connection

  All the software and scanning twain installed, so I was able to scan the copy etc.

  I could browse and choose my PC from the front panel of the printer

  However, it was Tuesday confirmed to a friend that their printer would work on a new laptop - bought the laptop

  Fujitsu - but more recent model with 3 USB ports

  I have install and then used the same FULL configured driver to be installed (V14)

  selected as a network printer and then, during the installation, I get an error hardware error USB and USB drivers

  All the USB works, that I've used - BUT the printer is networked and no USB used

  tried to download the driver and install it-exactly the same question

  SO I configure using the devices and printers 'add printer' network and installed

  I can print OK

  BUT no analysis facilities

  and on the façade - cannot see the new PC to scan to

  The only real difference, is that this PC has USB3 and only mine has USB2

  DO not know why on a network installation USB even when searching for

  It's a problem because Drivet package not has not been updated for USB3 - y at - it a patch?

  Thanks for any help / advice

  Hi etaf,.

  I guess the short answer is: Yes, the problem with the software and the 3.0 Port.

  The long answer with a possible work around is as follows: first of all, the software looks for minimum requirements. Because the software is older, he doesn't know what a 3.0 port. You are right when you say that it should work since you do not use the USB and use wireless instead, but this is not the case.

  There is something we can try, but I can't guarantee it will work. I thought first we could connect a USB cable and run the software made to force the software to see the USB port, but then the software wouldn't even get far enough because you can't plug the cable to the most later in the installation.

  My second thought and most promising suggestion is to connect the USB cable (although we do normally not until the software prompts us to) and use the installation wizard HP Print to get the insteaad of software to use the CD or download from the printer driver page. Still, I can't say with certainty that it works, but I don't see why it would not be worth a try.

  If it works, and we get the software installed you can convert the USB connection to a wireless connection using the software. Fingers crossed! Download and run the with the following link. Printer HP install wizard for Windows

  If this does not work, or you don't want to bother with it (not worth trying), I might consider getting a new model of the printer. You can even call HP. They might be able to offer a discount on a newer model. If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

• OfficeJet pro 8600 + scan if there is no configuration for the network folder

  The printer is wireless to my router and I connect to a computer connected to the router with an ethernet cable.  The computer is running Windows 7SP1 Home Premium 64.

  During the original installation of the printer 3 days ago, I used the wizard set up 'scan to a network folder' a record 'scans public '.  He created the 'profile' correctly and worked well the first time I scanned (I scanned the 3 or 4 times with different tweaks to experiment).  However the next day it no longer worked error on the printer was, 'could not connect to \\Computername\Public scan. Check that the remote computer is on. "Obviously, the computer was on, some communication problems only happened from one day to the next day, he was sitting unattended.  Hmmmmm.  Note that the option "Scan to Computer" works very well, so communication is simply no "scan to network folder" option and I really want to scan to a network folder.

  I went in a private "Scans" folder on my account and created a share as 'DadsScans', creating permissions and following all the tips I've come across so far.  Then I tried many times with the wizard to create a new configuration in the profile and all have failed and yes I found the network and turned on file sharing.  Also remember that it worked fine the first night?

  I tried to enter the local path to the folder (C:\users\dad\My analysis) with a share name (DadsScans), but the error message after choosing the option "test and save" was, "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Setting is not saved. »

  I then tried to enter the share name directly in the path of the network folder, like "\\computername\DadsScans", but the error was "error.  Your printer cannot connect to the server.  Press 'Back' to correct the address and the name of the server.  Make sure that network discovery and file sharing are turned on... "Note, I also tried,"\\computer Address\DadsScans IP"and got the same error.

  Finally, I disabled my firewall and my anti-virus in real time and tried again and got the same error messages.

  Once again, my network discovery and file sharing are on and it worked fine the first time I've used suggesting that everything was fine.  What happened during the night, so that the printer and computer sitting idle?  I've changed NOTHING!  Any suggestions would be greatly appreciated!

  Well well, after several hours of attempts to solve the problem, the 'light bulb went on!  The night after that I configured the "scan to network folder" option, we had some difficulties with our network so I reset our modem and DSL router.  Who cleaned the problems of network with devices.  It is apparently broke something with the communications between the scanner and the computer.  A simple re-start the computer tonight and wa - la, the original public scan I configure worked again and I could create new profiles of "scanning to '!

• What is the difference between a backup of the plant and a recovery disk?

  For me a simple question, so I hope a simple answer.

  When I got to my laptop that I created a USB using DBR recovery. It is a little more than 8 GB in size and is appointed SYSRECOVERY.

  At that time there I didn't create a backup of the plant.

  Having recently been read on things related to the re-establishment of a system in case of disk failure hard etc, I saw that Dell has said you must create USB recovery media and a backup of the plant. So, I got a new USB and today created a backup of the plant.

  Looking at it, it is also called SYSRECOVERY and both have exactly the same list of files and folders and have almost the same size.

  So just what is the difference between these 2 options (if any)?

  Or do I now have 2 USBs that will do exactly the same work to restore my laptop computer provided that the factory?

  Case there is no difference, why Dell offer both (and recommend you create both)?

  Thank you

  Technically speaking a recovery media and backup of the plant are the same. But according to the post that you saw at Dell, recovery media is a backup of backup from the factory with the files and applications that you added later. Therefore, to be on the safe side, Dell recommends to create a backup of files and software that have been added later (or is not part of the default configuration).

  The factory backup contains all drivers and software according to the configuration of the PC, and that were pre-installed on your computer.

  Generally, Windows failure, you can use factory backup media to restore the PC without affecting your personal files and software. In the event of hard disk failure, where the hard drive is replaced, recovery media will be useful to restore Windows as well your files and applications.

• configurations with the domain members

  I have a few closed configurations stored in the library that contains the virtual computers that are members of the domain (this is necessary because they have SQL server installed).  When someone clones of the configuration of the workspace, and it deploys, they get an error message that says: there is no domain trust and they must open a session as long as local administrator, leave the area and then attach it again.  I know it's because active directory does not have several instances of the same object.

  Now, the SQL Server VM in the configuration was based on a model that was not a member of the domain.  Sysprep was run to give it a unique ID, hostname and IP address.  But sysprep does not work when deploying a configuration and you cannot change the host name of a computer that is running SQL Server without breaking the Forum anyway.

  Someone suggested the deployment of a virtual domain with the enclosed configuration controller, but this DC would not be synchronized with our physical production, DCs and such deployment requires a lot of overhead.

  Can you really not use multiple instances of a Setup enclosed if virtual machines are members of the domain?

  Is your SQL VM need to be part of your production domain.  We have a base library which is a domain controller for its domain, we then take this configuration and add a SQL Server and that capture to a new library.  Because SQL server is configured to communicate with the internal DC at this configuration, we have never questions when there are several verified instances.

• SRM retrieve the Configuration of the Site

  Hello.

  I hope someone can help.  It has been a few months since our start SRM 1 day course and my mind was obviously a little fuzzy on the implementation of MRS.   This is our situation and where I confused me.

  Installed SRM on the site protected with appropriate database configured in this site.

  Installed the plugin for this site SRM.

  Created second DB server in recovery site data base.

  When you try to install SRM in the recovering site, I get the following error message:

  «vCenter server XXXXX was already an extension registered for VMware vCenter site recovery manager are you sure you want to overwrite...» »

  This seems a strange message and still found nothing on the web.  I think I'm this setup entirely wrong, is this the case?

  Thank you very much

  Graeme

  Hi Graeme,

  You have need of two separate instances of vCenter in a SRM configuration, one for your protected site and one for your recovery site.

  It seems to me that both of your bodies MRS. try to connect to a single instance of vCenter which won't work (unless you use the shared recovery site of SRM, but that's another story).

  To resolve this problem, redeploy a new instance of vCenter on your recovery site, and point your recovery site SRM server.

  You should be good to go.

  HTH

  Cormac